CodeRabbit Generated Unit Tests: Add test_apa.bats and test_distro_specific.bats test files

Added missing I2C designware slave functionality

.github/CODEOWNERS

@@ -16,177 +16,306 @@ packages/bsp/jethub/	@armbian/build-scripts @adeepn
 tools/			@iav @neheb @hzyitc @mhoffrog
 
 # The following contents are generated by board configs
+config/boards/aml-a311d-cc.conf		@Tonymac32
+config/boards/aml-c400-plus.conf		@jomadeto
+config/boards/aml-s905d3-cc.wip		@Tonymac32
 config/boards/aml-s9xx-box.tvb		@SteeManMI
-config/boards/armsom-sige7.csc		@Z-Keven
-config/boards/ayn-odin2.conf		@FantasyGmm
-config/boards/bananapi.csc		@DylanHP
+config/boards/armsom-sige1.csc		@amazingfate
+config/boards/armsom-sige3.csc		@amazingfate
+config/boards/avaota-a1.csc		@chainsx
+config/boards/ayn-odin2.csc		@FantasyGmm
+config/boards/bananapi.conf		@DylanHP @janprunk
 config/boards/bananapicm4io.conf		@pyavitz
-config/boards/bananapim2pro.conf		@bretmlw
+config/boards/bananapif3.conf		@pyavitz
+config/boards/bananapim2plus.conf		@leggewie
+config/boards/bananapim2pro.conf		@igorpecovnik
 config/boards/bananapim2s.conf		@jeanrhum @pyavitz
+config/boards/bananapim2zero.csc		@mhawkins-consultant
 config/boards/bananapim3.csc		@AaronNGray
+config/boards/bananapim4berry.conf		@The-going
 config/boards/bananapim4zero.conf		@pyavitz
-config/boards/bananapim5.conf		@bretmlw
+config/boards/bananapim5.conf		@igorpecovnik
 config/boards/bananapim64.csc		@devdotnetorg
-config/boards/bigtreetech-cb1.conf		@bigtreetech
-config/boards/espressobin.csc		@ManoftheSea
-config/boards/firefly-rk3399.csc		@150balbes
+config/boards/bananapim7.conf		@amazingfate
+config/boards/beaglebone-ai64.conf		@Grippy98
+config/boards/beagleplay.conf		@Grippy98
+config/boards/beagley-ai.csc		@Grippy98
+config/boards/bigtreetech-cb1.conf		@JohnTheCoolingFan
+config/boards/bigtreetech-cb2.conf		@JohnTheCoolingFan
+config/boards/cherryba-m1.csc		@IsMrX
+config/boards/clearfogpro.csc		@Heisath
+config/boards/cm3588-nas.csc		@ColorfulRhino
+config/boards/coolpi-cm5.csc		@andyshrk
+config/boards/coolpi-genbook.csc		@andyshrk
+config/boards/firefly-itx-3588j.csc		@SeeleVolleri
 config/boards/fxblox-rk1.csc		@mahdichi
+config/boards/gateway-gz80x.conf		@pyavitz
+config/boards/h96-tvbox-3566.tvb		@hqnicolas
 config/boards/helios4.conf		@Heisath
+config/boards/helios64.conf		@prahal
 config/boards/hinlink-h28k.csc		@sputnik2019
 config/boards/hinlink-ht2.csc		@hoochiwetech
+config/boards/imb3588.conf		@JackHuang021
 config/boards/indiedroid-nova.csc		@lanefu
+config/boards/inovato-quadra.conf		@NicoD-SBC
 config/boards/jethubj100.conf		@adeepn
+config/boards/jethubj200.conf		@adeepn
 config/boards/jethubj80.conf		@adeepn
-config/boards/jetson-nano.csc		@150balbes
 config/boards/jp-tvbox-3566.tvb		@tdleiyao
-config/boards/khadas-edge2.conf		@igorpecovnik
+config/boards/khadas-edge2.conf		@efectn
 config/boards/khadas-vim1.conf		@igorpecovnik
 config/boards/khadas-vim1s.conf		@rpardini @viraniac
 config/boards/khadas-vim2.conf		@igorpecovnik
 config/boards/khadas-vim3.conf		@NicoD-SBC @rpardini
 config/boards/khadas-vim3l.conf		@rpardini
-config/boards/khadas-vim4.conf		@echatzip @rpardini @viraniac
+config/boards/khadas-vim4.conf		@adeepn @rpardini @viraniac
 config/boards/lafrite.conf		@Tonymac32
+config/boards/leez-p710.csc		@andyshrk
 config/boards/lepotato.conf		@Tonymac32
-config/boards/licheepi-4a.csc		@chainsx
+config/boards/licheepi-4a.eos		@chainsx
+config/boards/longanpi-4b.csc		@chainsx
+config/boards/lubancat2.csc		@andyshrk
 config/boards/mangopi-m28k.csc		@sputnik2019
-config/boards/mekotronics-r58-minipc.csc		@monkaBlyat
+config/boards/mba8mpxl-ras314.conf		@schmiedelm
+config/boards/mba8mpxl.conf		@schmiedelm
+config/boards/mekotronics-r58-minipc.conf		@monkaBlyat
 config/boards/mekotronics-r58x-4g.csc		@monkaBlyat
-config/boards/mekotronics-r58x.csc		@monkaBlyat
+config/boards/mekotronics-r58x.conf		@monkaBlyat
 config/boards/mixtile-blade3.csc		@rpardini
-config/boards/nanopct6.csc		@Tonymac32
-config/boards/nanopi-r4s.conf		@Manouchehri
+config/boards/mksklipad50.conf		@torte71
+config/boards/mkspi.csc		@redrathnure
+config/boards/nanopct6-lts.conf		@SuperKali @Tonymac32
+config/boards/nanopct6.conf		@SuperKali @Tonymac32
+config/boards/nanopi-m6.conf		@efectn
+config/boards/nanopi-r3s-lts.conf		@pyavitz
 config/boards/nanopi-r5s.csc		@utlark
-config/boards/nanopi-r6s.csc		@efectn
+config/boards/nanopi-r6c.csc		@ColorfulRhino
+config/boards/nanopi-r6s.conf		@efectn
 config/boards/nanopiair.csc		@1ubuntuuser
-config/boards/nanopiduo.conf		@sgjava
-config/boards/nanopiduo2.conf		@viraniac
+config/boards/nanopiduo.csc		@sgjava
+config/boards/nanopim4v2.conf		@igorpecovnik
+config/boards/nanopineo.csc		@spendist
+config/boards/nanopineo2.csc		@spendist
+config/boards/nanopineocore2.csc		@AGM1968
 config/boards/nanopineoplus2.csc		@teknoid
+config/boards/odroidc1.conf		@juanlufont
 config/boards/odroidc2.conf		@teknoid
+config/boards/odroidc4.conf		@igorpecovnik
+config/boards/odroidhc4.conf		@igorpecovnik
 config/boards/odroidm1.conf		@rpardini
+config/boards/odroidm2.csc		@mlegenovic
 config/boards/odroidn2.conf		@NicoD-SBC
 config/boards/odroidxu4.conf		@joekhoobyar
-config/boards/olimex-teres-a64.conf		@Kreyren
-config/boards/onecloud.conf		@hzyitc
-config/boards/orangepi-r1.csc		@schwar3kat
-config/boards/orangepi-r1plus-lts.csc		@schwar3kat
-config/boards/orangepi3-lts.csc		@viraniac
-config/boards/orangepi3.csc		@viraniac
+config/boards/olimex-teres-a64.csc		@Kreyren
+config/boards/onecloud.csc		@hzyitc
+config/boards/oneplus-kebab.conf		@amazingfate
 config/boards/orangepi4-lts.conf		@paolosabatino
 config/boards/orangepi4.csc		@paolosabatino
-config/boards/orangepi5-plus.conf		@efectn
+config/boards/orangepi5-plus.conf		@alexl83
 config/boards/orangepi5.conf		@efectn
 config/boards/orangepione.conf		@StephenGraf
 config/boards/orangepipc.csc		@lbmendes
-config/boards/orangepiprime.conf		@viraniac
-config/boards/orangepizero.conf		@viraniac
-config/boards/orangepizero2.conf		@AGM1968 @krachlatte
-config/boards/orangepizeroplus.conf		@schwar3kat
-config/boards/phytiumpi.csc		@chainsx
+config/boards/orangepipcplus.csc		@Janmcha
+config/boards/orangepizero2.csc		@AGM1968 @krachlatte
+config/boards/orangepizero2w.csc		@chraac
+config/boards/orangepizero3.csc		@alexl83 @chraac
+config/boards/orangepizeroplus.csc		@schwar3kat
+config/boards/phytiumpi.conf		@chainsx
 config/boards/pine64.conf		@PanderMusubi
-config/boards/pine64so.csc		@joshaspinall
-config/boards/pinebook-pro.conf		@TRSx80 @ahoneybun
+config/boards/pinebook-pro.csc		@TRSx80 @ahoneybun
+config/boards/pocketbeagle2.conf		@Grippy98
+config/boards/pocketchip-sd.csc		@TheSnowfield
+config/boards/qcom-robotics-rb5.conf		@FantasyGmm
 config/boards/qemu-uboot-arm64.csc		@rpardini
 config/boards/qemu-uboot-x86.csc		@rpardini
 config/boards/qemu-uefi-x86.conf		@davidandreoletti
+config/boards/radxa-e20c.csc		@mattx433
 config/boards/radxa-e25.csc		@krachlatte
+config/boards/radxa-e52c.conf		@amazingfate
+config/boards/radxa-nio-12l.conf		@HeyMeco
 config/boards/radxa-zero.conf		@clee @engineer-80
 config/boards/radxa-zero2.csc		@monkaBlyat
 config/boards/recore.csc		@eliasbakken
 config/boards/renegade.conf		@Tonymac32
-config/boards/rock-3a.csc		@ZazaBR @amazingfate @catalinii @vamzii
-config/boards/rock-5a.csc		@amazingfate
-config/boards/rock-5b.csc		@amazingfate @linhz0hz
+config/boards/retro-lite-cm5.csc		@ginkage
+config/boards/rk3318-box.tvb		@paolosabatino
+config/boards/rk3328-heltec.csc		@sicXnull
+config/boards/rock-2a.csc		@CodeChenL
+config/boards/rock-2f.csc		@CodeChenL
+config/boards/rock-3a.conf		@ZazaBR @amazingfate @catalinii @vamzii
+config/boards/rock-5-itx.conf		@amazingfate @prahal
+config/boards/rock-5a.conf		@amazingfate
+config/boards/rock-5b-plus.conf		@HeyMeco @fridtjof
+config/boards/rock-5b.conf		@amazingfate @linhz0hz
+config/boards/rock-5c.conf		@schwar3kat
+config/boards/rock-5t.conf		@HeyMeco
 config/boards/rock-s0.conf		@brentr
-config/boards/rock64.csc		@clee
+config/boards/rock64.conf		@clee
 config/boards/rockpi-4a.csc		@clee
-config/boards/rockpi-e.conf		@krachlatte
+config/boards/rockpi-e.conf		@paolosabatino
 config/boards/rockpi-s.conf		@brentr
-config/boards/rockpro64.conf		@joekhoobyar
-config/boards/rpi4b.conf		@PanderMusubi @teknoid @viraniac
-config/boards/rpi5b.conf		@viraniac
+config/boards/rockpro64.csc		@joekhoobyar
+config/boards/rpi4b.conf		@PanderMusubi @teknoid
+config/boards/sakurapi-rk3308b.csc		@TheSnowfield
 config/boards/sk-am62b.conf		@glneo
 config/boards/sk-am64b.conf		@glneo
 config/boards/sk-am68.conf		@glneo
+config/boards/sk-am69.conf		@glneo
 config/boards/sk-tda4vm.conf		@glneo
 config/boards/station-m1.csc		@150balbes
-config/boards/station-m2.csc		@150balbes
 config/boards/station-m3.csc		@chainsx
-config/boards/station-p2.csc		@150balbes
-config/boards/thinkpad-x13s.wip		@PeterChrz @rpardini
+config/boards/sweet-potato.conf		@Tonymac32
+config/boards/thinkpad-x13s.conf		@PeterChrz @rpardini
 config/boards/tinkerboard.conf		@paolosabatino
 config/boards/tritium-h3.conf		@Tonymac32
 config/boards/tritium-h5.conf		@Tonymac32
 config/boards/uefi-arm64.conf		@rpardini
 config/boards/uefi-x86.conf		@rpardini
+config/boards/visionfive2.csc		@libiunc
 config/boards/wsl2-arm64.csc		@rpardini
 config/boards/wsl2-x86.csc		@rpardini
+config/boards/x96-mate.tvb		@Ressetkk
+config/boards/x96q.tvb		@sicXnull
 config/boards/xiaomi-elish.conf		@amazingfate
-config/boards/xiaomi-umi.wip		@FantasyGmm
-config/kernel/linux-arm64-*.config		@FantasyGmm @amazingfate
-config/kernel/linux-bcm2711-*.config		@PanderMusubi @teknoid @viraniac
-config/kernel/linux-k3-*.config		@glneo
-config/kernel/linux-media-*.config		@150balbes
-config/kernel/linux-meson-*.config		@hzyitc
-config/kernel/linux-meson-s4t7-*.config		@echatzip @rpardini @viraniac
-config/kernel/linux-meson64-*.config		@NicoD-SBC @SteeManMI @Tonymac32 @adeepn @bretmlw @clee @engineer-80 @igorpecovnik @jeanrhum @monkaBlyat @pyavitz @rpardini @teknoid
+config/boards/youyeetoo-r1-v3.csc		@SuperKali
+config/boards/yy3568.csc		@hqnicolas
+config/kernel/linux-arm64-*.config		@PeterChrz @rpardini
+config/kernel/linux-bcm2711-*.config		@PanderMusubi @teknoid
+config/kernel/linux-genio-*.config		@HeyMeco
+config/kernel/linux-k3-*.config		@Grippy98 @glneo
+config/kernel/linux-k3-beagle-*.config		@Grippy98
+config/kernel/linux-meson-*.config		@hzyitc @juanlufont
+config/kernel/linux-meson-s4t7-*.config		@adeepn @rpardini @viraniac
+config/kernel/linux-meson64-*.config		@NicoD-SBC @SteeManMI @Tonymac32 @adeepn @clee @engineer-80 @igorpecovnik @jeanrhum @jomadeto @monkaBlyat @pyavitz @rpardini @teknoid
 config/kernel/linux-mvebu-*.config		@Heisath
-config/kernel/linux-mvebu64-*.config		@ManoftheSea
 config/kernel/linux-odroidxu4-*.config		@joekhoobyar
 config/kernel/linux-phytium-embedded-*.config		@chainsx
-config/kernel/linux-rk35xx-*.config		@Tonymac32 @Z-Keven @ZazaBR @amazingfate @catalinii @chainsx @efectn @hoochiwetech @igorpecovnik @krachlatte @lanefu @linhz0hz @mahdichi @monkaBlyat @rpardini @sputnik2019 @vamzii
+config/kernel/linux-rk35xx-*.config		@CodeChenL @ColorfulRhino @HeyMeco @JackHuang021 @SeeleVolleri @SuperKali @Tonymac32 @ZazaBR @alexl83 @amazingfate @andyshrk @catalinii @chainsx @efectn @fridtjof @ginkage @hoochiwetech @hqnicolas @krachlatte @lanefu @linhz0hz @mahdichi @mattx433 @monkaBlyat @prahal @rpardini @schwar3kat @sputnik2019 @vamzii
 config/kernel/linux-rockchip-*.config		@paolosabatino
-config/kernel/linux-rockchip-rk3588-*.config		@Tonymac32 @amazingfate @efectn @igorpecovnik @lanefu @linhz0hz @rpardini
-config/kernel/linux-rockchip64-*.config		@Manouchehri @TRSx80 @Tonymac32 @ZazaBR @ahoneybun @amazingfate @brentr @catalinii @clee @joekhoobyar @krachlatte @paolosabatino @rpardini @schwar3kat @tdleiyao @utlark @vamzii
-config/kernel/linux-sun50iw9-*.config		@AGM1968 @krachlatte
-config/kernel/linux-sun50iw9-btt-*.config		@bigtreetech
-config/kernel/linux-sunxi-*.config		@1ubuntuuser @AaronNGray @DylanHP @StephenGraf @Tonymac32 @lbmendes @schwar3kat @sgjava @viraniac
-config/kernel/linux-sunxi64-*.config		@AGM1968 @Kreyren @PanderMusubi @Tonymac32 @bigtreetech @devdotnetorg @eliasbakken @joshaspinall @krachlatte @pyavitz @schwar3kat @teknoid @viraniac
+config/kernel/linux-rockchip64-*.config		@150balbes @ColorfulRhino @HeyMeco @JohnTheCoolingFan @SuperKali @TRSx80 @TheSnowfield @Tonymac32 @ZazaBR @ahoneybun @alexl83 @amazingfate @andyshrk @brentr @catalinii @clee @efectn @fridtjof @hqnicolas @igorpecovnik @joekhoobyar @krachlatte @lanefu @linhz0hz @mlegenovic @paolosabatino @prahal @pyavitz @redrathnure @rpardini @schwar3kat @sicXnull @tdleiyao @torte71 @utlark @vamzii
+config/kernel/linux-sm8250-*.config		@FantasyGmm @amazingfate
+config/kernel/linux-sm8550-*.config		@FantasyGmm
+config/kernel/linux-spacemit-*.config		@pyavitz
+config/kernel/linux-starfive2-*.config		@libiunc
+config/kernel/linux-sun55iw3-syterkit-*.config		@chainsx
+config/kernel/linux-sunxi-*.config		@1ubuntuuser @AaronNGray @DylanHP @Janmcha @StephenGraf @TheSnowfield @Tonymac32 @janprunk @lbmendes @leggewie @mhawkins-consultant @sgjava @spendist
+config/kernel/linux-sunxi64-*.config		@AGM1968 @IsMrX @JohnTheCoolingFan @Kreyren @NicoD-SBC @PanderMusubi @Ressetkk @The-going @Tonymac32 @alexl83 @chraac @devdotnetorg @eliasbakken @krachlatte @pyavitz @schwar3kat @sicXnull @spendist @teknoid
 config/kernel/linux-thead-*.config		@chainsx
-config/kernel/linux-uefi-arm64-*.config		@150balbes @PeterChrz @rpardini
+config/kernel/linux-tqma-*.config		@schmiedelm
+config/kernel/linux-uefi-arm64-*.config		@rpardini
 config/kernel/linux-uefi-x86-*.config		@davidandreoletti @rpardini
-patch/kernel/archive/meson-s4t7-*/		@echatzip @rpardini @viraniac
+config/kernel/linux-wsl2-arm64-*.config		@rpardini
+config/kernel/linux-wsl2-x86-*.config		@rpardini
+patch/atf/atf-arm64/		@PeterChrz @rpardini
+patch/atf/atf-bcm2711/		@PanderMusubi @teknoid
+patch/atf/atf-genio/		@HeyMeco
+patch/atf/atf-imx8/		@schmiedelm
+patch/atf/atf-k3-beagle/		@Grippy98
+patch/atf/atf-k3/		@Grippy98 @glneo
+patch/atf/atf-phytium-embedded/		@chainsx
+patch/atf/atf-rockchip64/		@ColorfulRhino @SuperKali @TRSx80 @Tonymac32 @ahoneybun @andyshrk @clee @joekhoobyar @paolosabatino @prahal
+patch/atf/atf-sm8250/		@FantasyGmm @amazingfate
+patch/atf/atf-sm8550/		@FantasyGmm
+patch/atf/atf-spacemit/		@pyavitz
+patch/atf/atf-sun55iw3-syterkit/		@chainsx
+patch/atf/atf-sunxi64/		@AGM1968 @IsMrX @JohnTheCoolingFan @Kreyren @NicoD-SBC @PanderMusubi @Ressetkk @The-going @Tonymac32 @alexl83 @chraac @devdotnetorg @eliasbakken @krachlatte @pyavitz @schwar3kat @sicXnull @spendist @teknoid
+patch/atf/atf-wsl2-arm64/		@rpardini
+patch/kernel/archive/bcm2711-*/		@PanderMusubi @teknoid
+patch/kernel/archive/imx8m-*/		@schmiedelm
+patch/kernel/archive/k3-*/		@Grippy98 @glneo
+patch/kernel/archive/k3-beagle-*/		@Grippy98
+patch/kernel/archive/meson-*/		@hzyitc @juanlufont
+patch/kernel/archive/meson-s4t7-*/		@adeepn @rpardini @viraniac
+patch/kernel/archive/meson64-*/		@NicoD-SBC @SteeManMI @Tonymac32 @adeepn @clee @engineer-80 @igorpecovnik @jeanrhum @jomadeto @monkaBlyat @pyavitz @rpardini @teknoid
+patch/kernel/archive/mvebu-*/		@Heisath
+patch/kernel/archive/odroidxu4-*/		@joekhoobyar
+patch/kernel/archive/rockchip-*/		@paolosabatino
+patch/kernel/archive/rockchip64-*/		@150balbes @ColorfulRhino @HeyMeco @JohnTheCoolingFan @SuperKali @TRSx80 @TheSnowfield @Tonymac32 @ZazaBR @ahoneybun @alexl83 @amazingfate @andyshrk @brentr @catalinii @clee @efectn @fridtjof @hqnicolas @igorpecovnik @joekhoobyar @krachlatte @lanefu @linhz0hz @mlegenovic @paolosabatino @prahal @pyavitz @redrathnure @rpardini @schwar3kat @sicXnull @tdleiyao @torte71 @utlark @vamzii
 patch/kernel/archive/sm8250-*/		@FantasyGmm @amazingfate
-patch/kernel/archive/sun50iw9-*/		@AGM1968 @krachlatte
-patch/kernel/archive/sun50iw9-btt-*/		@bigtreetech
-patch/kernel/archive/sunxi-*/		@1ubuntuuser @AGM1968 @AaronNGray @DylanHP @Kreyren @PanderMusubi @StephenGraf @Tonymac32 @bigtreetech @devdotnetorg @eliasbakken @joshaspinall @krachlatte @lbmendes @pyavitz @schwar3kat @sgjava @teknoid @viraniac
-patch/kernel/archive/uefi-arm64-*/		@150balbes @PeterChrz @rpardini
+patch/kernel/archive/sm8550-*/		@FantasyGmm
+patch/kernel/archive/spacemit-*/		@pyavitz
+patch/kernel/archive/sunxi-*/		@1ubuntuuser @AGM1968 @AaronNGray @DylanHP @IsMrX @Janmcha @JohnTheCoolingFan @Kreyren @NicoD-SBC @PanderMusubi @Ressetkk @StephenGraf @The-going @TheSnowfield @Tonymac32 @alexl83 @chraac @devdotnetorg @eliasbakken @janprunk @krachlatte @lbmendes @leggewie @mhawkins-consultant @pyavitz @schwar3kat @sgjava @sicXnull @spendist @teknoid
+patch/kernel/archive/uefi-arm64-*/		@PeterChrz @rpardini
 patch/kernel/archive/uefi-x86-*/		@davidandreoletti @rpardini
-patch/kernel/arm64-*/		@FantasyGmm @amazingfate
-patch/kernel/bcm2711-*/		@PanderMusubi @teknoid @viraniac
-patch/kernel/k3-*/		@glneo
-patch/kernel/media-*/		@150balbes
-patch/kernel/meson-*/		@hzyitc
-patch/kernel/meson64-*/		@NicoD-SBC @SteeManMI @Tonymac32 @adeepn @bretmlw @clee @engineer-80 @igorpecovnik @jeanrhum @monkaBlyat @pyavitz @rpardini @teknoid
-patch/kernel/mvebu-*/		@Heisath
-patch/kernel/mvebu64-*/		@ManoftheSea
-patch/kernel/odroidxu4-*/		@joekhoobyar
+patch/kernel/archive/wsl2-arm64-*/		@rpardini
+patch/kernel/archive/wsl2-x86-*/		@rpardini
+patch/kernel/genio-1200-*/		@HeyMeco
 patch/kernel/phytium-embedded-*/		@chainsx
-patch/kernel/rk35xx-*/		@Tonymac32 @Z-Keven @ZazaBR @amazingfate @catalinii @chainsx @efectn @hoochiwetech @igorpecovnik @krachlatte @lanefu @linhz0hz @mahdichi @monkaBlyat @rpardini @sputnik2019 @vamzii
-patch/kernel/rk35xx-vendor-*/		@Tonymac32 @Z-Keven @ZazaBR @amazingfate @catalinii @chainsx @efectn @hoochiwetech @krachlatte @lanefu @linhz0hz @mahdichi @monkaBlyat @rpardini @sputnik2019 @vamzii
-patch/kernel/rockchip-*/		@paolosabatino
-patch/kernel/rockchip-rk3588-*/		@Tonymac32 @amazingfate @efectn @igorpecovnik @lanefu @linhz0hz @rpardini
-patch/kernel/rockchip64-*/		@Manouchehri @TRSx80 @Tonymac32 @ZazaBR @ahoneybun @amazingfate @brentr @catalinii @clee @joekhoobyar @krachlatte @paolosabatino @rpardini @schwar3kat @tdleiyao @utlark @vamzii
-patch/kernel/sun50iw9-*/		@AGM1968 @krachlatte
+patch/kernel/rk35xx-vendor-*/		@CodeChenL @ColorfulRhino @HeyMeco @JackHuang021 @SeeleVolleri @SuperKali @Tonymac32 @ZazaBR @alexl83 @amazingfate @andyshrk @catalinii @chainsx @efectn @fridtjof @ginkage @hoochiwetech @hqnicolas @krachlatte @lanefu @linhz0hz @mahdichi @mattx433 @monkaBlyat @prahal @rpardini @schwar3kat @sputnik2019 @vamzii
+patch/kernel/starfive2-*/		@libiunc
+patch/kernel/sun55iw3-syterkit-*/		@chainsx
 patch/kernel/thead-*/		@chainsx
-sources/families/arm64.conf		@150balbes @FantasyGmm @PeterChrz @amazingfate @rpardini
-sources/families/bcm2711.conf		@PanderMusubi @teknoid @viraniac
-sources/families/k3.conf		@glneo
-sources/families/media.conf		@150balbes
-sources/families/meson-s4t7.conf		@echatzip @rpardini @viraniac
-sources/families/meson.conf		@hzyitc
-sources/families/meson64.conf		@NicoD-SBC @SteeManMI @Tonymac32 @adeepn @bretmlw @clee @engineer-80 @igorpecovnik @jeanrhum @monkaBlyat @pyavitz @rpardini @teknoid
+patch/kernel/wsl2-arm64-*/		@rpardini
+patch/u-boot/legacy/		@chainsx @joekhoobyar @juanlufont @lanefu
+patch/u-boot/legacy/u-boot-clearfog/		@Heisath
+patch/u-boot/legacy/u-boot-helios4/		@Heisath
+patch/u-boot/legacy/u-boot-khadas-edge2-rk3588/		@efectn
+patch/u-boot/legacy/u-boot-radxa-rk35xx/		@CodeChenL @HeyMeco @JackHuang021 @SeeleVolleri @SuperKali @Tonymac32 @ZazaBR @alexl83 @amazingfate @catalinii @chainsx @efectn @fridtjof @ginkage @hoochiwetech @hqnicolas @krachlatte @linhz0hz @mahdichi @mattx433 @monkaBlyat @prahal @rpardini @schwar3kat @sputnik2019 @tdleiyao @vamzii
+patch/u-boot/legacy/u-boot-spacemit-k1/		@pyavitz
+patch/u-boot/u-boot-beagle/		@Grippy98
+patch/u-boot/u-boot-k3-beagle/		@Grippy98
+patch/u-boot/u-boot-k3/		@Grippy98 @glneo
+patch/u-boot/u-boot-meson-s4t7/		@adeepn @rpardini @viraniac
+patch/u-boot/u-boot-qemu-arm64/		@rpardini
+patch/u-boot/u-boot-qemu-x86/		@rpardini
+patch/u-boot/u-boot-rockchip64-v2022.04/		@TRSx80 @ahoneybun @paolosabatino
+patch/u-boot/u-boot-rockchip64/		@Tonymac32 @andyshrk @clee @igorpecovnik @prahal @redrathnure @sicXnull
+patch/u-boot/u-boot-sunxi-crust/		@AGM1968 @Kreyren @NicoD-SBC @PanderMusubi @Tonymac32 @devdotnetorg @schwar3kat @spendist @teknoid
+patch/u-boot/u-boot-sunxi/		@1ubuntuuser @AGM1968 @DylanHP @Janmcha @JohnTheCoolingFan @Kreyren @NicoD-SBC @PanderMusubi @Ressetkk @StephenGraf @TheSnowfield @Tonymac32 @alexl83 @chraac @devdotnetorg @eliasbakken @janprunk @krachlatte @lbmendes @leggewie @mhawkins-consultant @schwar3kat @sgjava @sicXnull @spendist @teknoid
+patch/u-boot/u-boot-sunxi/board_bananapim3/		@AaronNGray
+patch/u-boot/u-boot-tqma/		@schmiedelm
+patch/u-boot/v2022.01/		@teknoid
+patch/u-boot/v2022.07/		@Tonymac32 @igorpecovnik
+patch/u-boot/v2022.10/		@NicoD-SBC
+patch/u-boot/v2023.07.02/		@clee @engineer-80
+patch/u-boot/v2023.10/		@adeepn
+patch/u-boot/v2024.01/		@Tonymac32 @rpardini
+patch/u-boot/v2024.01/board_orangepi5/		@efectn
+patch/u-boot/v2024.04-rock5b-radxa/		@amazingfate @linhz0hz
+patch/u-boot/v2024.04/		@Tonymac32 @chraac @pyavitz @utlark
+patch/u-boot/v2024.07-coolpi-cm5/		@andyshrk
+patch/u-boot/v2024.07/		@adeepn @igorpecovnik @monkaBlyat
+patch/u-boot/v2024.07/board_station-m1/		@150balbes
+patch/u-boot/v2024.10/		@HeyMeco @alexl83 @brentr @fridtjof @pyavitz
+patch/u-boot/v2024.10/board_bigtreetech-cb2/		@JohnTheCoolingFan
+patch/u-boot/v2025-sunxi/		@The-going
+patch/u-boot/v2025.01-rc3-coolpi-cm5/		@andyshrk
+patch/u-boot/v2025.01/		@ColorfulRhino @efectn @jeanrhum @joekhoobyar @paolosabatino @pyavitz @rpardini @torte71
+patch/u-boot/v2025.01/board_h96-tvbox-3566/		@hqnicolas
+patch/u-boot/v2025.04/		@IsMrX @NicoD-SBC @SuperKali @TheSnowfield @Tonymac32 @ZazaBR @amazingfate @andyshrk @catalinii @igorpecovnik @mlegenovic @pyavitz @rpardini @vamzii
+sources/families/bcm2711.conf		@PanderMusubi @teknoid
+sources/families/genio.conf		@HeyMeco
+sources/families/imx8m.conf		@schmiedelm
+sources/families/jethub.conf		@adeepn
+sources/families/k3.conf		@Grippy98 @glneo
+sources/families/meson-axg.conf		@pyavitz
+sources/families/meson-g12a.conf		@clee @engineer-80
+sources/families/meson-g12b.conf		@NicoD-SBC @Tonymac32 @jeanrhum @monkaBlyat @pyavitz @rpardini
+sources/families/meson-gxbb.conf		@teknoid
+sources/families/meson-gxl.conf		@SteeManMI @Tonymac32 @igorpecovnik @jomadeto
+sources/families/meson-s4t7.conf		@adeepn @rpardini @viraniac
+sources/families/meson-sm1.conf		@Tonymac32 @igorpecovnik @rpardini
+sources/families/meson8b.conf		@hzyitc @juanlufont
 sources/families/mvebu.conf		@Heisath
-sources/families/mvebu64.conf		@ManoftheSea
 sources/families/odroidxu4.conf		@joekhoobyar
 sources/families/phytium-embedded.conf		@chainsx
-sources/families/rk35xx.conf		@Tonymac32 @Z-Keven @ZazaBR @amazingfate @catalinii @chainsx @efectn @hoochiwetech @igorpecovnik @krachlatte @lanefu @linhz0hz @mahdichi @monkaBlyat @rpardini @sputnik2019 @vamzii
-sources/families/rockchip-rk3588.conf		@Tonymac32 @amazingfate @efectn @igorpecovnik @lanefu @linhz0hz @rpardini
+sources/families/rk35xx.conf		@CodeChenL @ZazaBR @amazingfate @andyshrk @catalinii @hoochiwetech @hqnicolas @krachlatte @mattx433 @pyavitz @sputnik2019 @tdleiyao @vamzii
+sources/families/rockchip-rk3588.conf		@ColorfulRhino @HeyMeco @JackHuang021 @SeeleVolleri @SuperKali @Tonymac32 @alexl83 @amazingfate @andyshrk @chainsx @efectn @fridtjof @ginkage @lanefu @linhz0hz @mahdichi @monkaBlyat @prahal @rpardini @schwar3kat
 sources/families/rockchip.conf		@paolosabatino
-sources/families/rockchip64.conf		@Manouchehri @TRSx80 @Tonymac32 @ZazaBR @ahoneybun @amazingfate @brentr @catalinii @clee @joekhoobyar @krachlatte @paolosabatino @rpardini @schwar3kat @tdleiyao @utlark @vamzii
-sources/families/sun50iw9-btt.conf		@bigtreetech
-sources/families/sun50iw9.conf		@AGM1968 @krachlatte
-sources/families/sunxi.conf		@1ubuntuuser @AaronNGray @DylanHP @StephenGraf @Tonymac32 @lbmendes @schwar3kat @sgjava @viraniac
-sources/families/sunxi64.conf		@AGM1968 @Kreyren @PanderMusubi @Tonymac32 @bigtreetech @devdotnetorg @eliasbakken @joshaspinall @krachlatte @pyavitz @schwar3kat @teknoid @viraniac
+sources/families/rockchip64.conf		@150balbes @JohnTheCoolingFan @TRSx80 @TheSnowfield @Tonymac32 @ahoneybun @andyshrk @brentr @clee @hqnicolas @igorpecovnik @joekhoobyar @mlegenovic @paolosabatino @prahal @redrathnure @rpardini @sicXnull @torte71 @utlark
+sources/families/sm8250.conf		@FantasyGmm @amazingfate
+sources/families/sm8550.conf		@FantasyGmm
+sources/families/spacemit.conf		@pyavitz
+sources/families/starfive2.conf		@libiunc
+sources/families/sun50iw1.conf		@Kreyren @PanderMusubi @devdotnetorg @eliasbakken
+sources/families/sun50iw2.conf		@AGM1968 @Tonymac32 @schwar3kat @spendist @teknoid
+sources/families/sun50iw6.conf		@NicoD-SBC
+sources/families/sun50iw9-bpi.conf		@The-going @pyavitz
+sources/families/sun50iw9.conf		@AGM1968 @IsMrX @JohnTheCoolingFan @Ressetkk @alexl83 @chraac @krachlatte @sicXnull
+sources/families/sun55iw3-syterkit.conf		@chainsx
+sources/families/sun5i.conf		@TheSnowfield
+sources/families/sun7i.conf		@DylanHP @janprunk
+sources/families/sun8i.conf		@1ubuntuuser @AaronNGray @Janmcha @StephenGraf @Tonymac32 @lbmendes @leggewie @mhawkins-consultant @sgjava @spendist
 sources/families/thead.conf		@chainsx
-sources/families/x86.conf		@davidandreoletti @rpardini
+sources/families/uefi-arm64.conf		@PeterChrz @rpardini
+sources/families/uefi-x86.conf		@davidandreoletti @rpardini

.github/ISSUE_TEMPLATE/1-bugreport.yml

@@ -0,0 +1,80 @@
+name: Bug Report for the Armbian Linux Build Framework
+description: Create a bug report if there is something wrong with the Armbian build framework.
+title: "[Bug]: "
+labels: ["Bug"]
+assignees: "armbian/build-scripts"
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thank you for helping us make Armbian better!
+  - type: textarea
+    id: what-happened
+    attributes:
+      label: What happened?
+      description: |
+
+        Please tell us what you expected to happen and what actually happened.
+      placeholder: An error x ocurred when I did y! But I expected z to happen.
+    validations:
+      required: true
+  - type: textarea
+    id: reproduce
+    attributes:
+      label: How to reproduce?
+      description: |
+
+        Provide the command you ran or explain the steps you did.
+      placeholder: Tell us step by step how to reproduce the issue! E.g. the command you gave to the framework.
+    validations:
+      required: true
+  - type: dropdown
+    id: version
+    attributes:
+      label: Branch
+      description: |
+
+        Which branch are you using?
+      options:
+        - main (main development branch)
+        - other (only relevant in corner cases)
+    validations:
+      required: true
+  - type: dropdown
+    id: host
+    attributes:
+      label: On which host OS are you running the build script and observing this problem?
+      multiple: false
+      options:
+        - Ubuntu 24.04 Noble
+        - Ubuntu 22.04 Jammy
+        - Debian 13 Trixie
+        - Debian 12 Bookworm
+        - Other
+    validations:
+      required: true
+  - type: checkboxes
+    id: host-is-wsl
+    attributes:
+      label: Are you building on Windows WSL2?
+      options:
+        - label: Yes, my Ubuntu/Debian/OtherOS is running on WSL2
+          required: false
+  - type: input
+    id: logs
+    attributes:
+      label: Relevant log URL
+      description: |
+        Run with `SHARE_LOG=yes`, at the end of log you will get something like this
+        ```[🌿] Log uploaded, share URL: [ https://paste.armbian.com/xxx ]```
+
+        Paste the URL here:
+      placeholder: https://paste.armbian.com/xxx
+  - type: checkboxes
+    id: terms
+    attributes:
+      label: Code of Conduct
+      description: By submitting this issue, you agree to follow our [Code of Conduct](https://github.com/armbian/build/blob/master/.github/CODE_OF_CONDUCT.md)
+      options:
+        - label: I agree to follow this project's Code of Conduct
+          required: true

.github/ISSUE_TEMPLATE/2-feature.yml

@@ -0,0 +1,27 @@
+name: Feature Request for the Armbian Linux Build Framework
+description: Suggest a feature that you want to see implemented.
+title: "[Feature Request]: "
+labels: ["Feature Request"]
+assignees: "igorpecovnik"
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Thanks for taking the time to fill out a feature reqest. A request does not guarantee consideration.
+  - type: textarea
+    id: what
+    attributes:
+      label: Which feature would you like to have?
+      placeholder: What is missing in your opinion?
+    validations:
+      required: true
+  - type: checkboxes
+    id: financing
+    attributes:
+      label: Funding
+      description: |
+
+        You are welcome to submit your feature request, but keep in mind we can only afford to cover minor tasks. If we decide to.<br>"
+      options:
+        - label: "[I am willing to cover expenses](https://www.armbian.com/contact/)"
+          required: false

.github/ISSUE_TEMPLATE/3-task.yml

@@ -0,0 +1,27 @@
+name: Task/To-Do for project tracking
+description: Discuss and track progress for a task you're working on.
+title: "[Task]: "
+labels: ["Task/To-Do"]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        Please use checkboxes for subtasks and link relevant PRs or issues for reference.
+        
+        You can use title tags like _Task_, _Story_ or _Epic_ similar to Jira [like described in the docs](https://docs.armbian.com/Process_Managing_Workflow/).
+        A _Story_ or _Epic_ may reference other _Tasks_ (GitHub issues). This task will automatically be mirrored to [Jira](https://armbian.atlassian.net/browse/AR).
+
+        Make sure to update your progress in case anyone wants to help with a task so noone is doing duplicate work.
+        Add the label "_Discussion_" to get feedback on your task and "_Help needed_" if you would prefer to not work on this this alone.
+  - type: textarea
+    id: task-list
+    attributes:
+      label: Task description
+      description: |
+        Enter your task goals here. You can make use of the subtask checkboxes (add more or remove if necessary). Actively ask for feedback if you want it.
+      value: |
+        
+        - [ ] 
+        - [ ] 
+        - [ ] 
+        - [ ] 

.github/ISSUE_TEMPLATE/bugreport.yml

@@ -1,80 +0,0 @@
-name: Armbian Linux Build Framework Bug Report
-description: Create a bug report if there is something wrong with the Armbian build framework.
-title: "Problem found ... "
-labels: ["bug"]
-assignees: "armbian/build-scripts"
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Thank you for helping us make Armbian better!
-  - type: textarea
-    id: what-happened
-    attributes:
-      label: What happened?
-      description: |
-
-        Also tell us, what did you expect to happen?
-      placeholder: An error x ocurred when I did y!
-    validations:
-      required: true
-  - type: textarea
-    id: reproduce
-    attributes:
-      label: How to reproduce?
-      description: |
-
-        Provide the command you ran or explain the steps you did.
-      placeholder: Tell us how you did it! E.g. the command you gave to the framework.
-    validations:
-      required: true
-  - type: dropdown
-    id: version
-    attributes:
-      label: Branch
-      description: |
-
-        Which branch are you using?
-      options:
-        - main (main development branch)
-        - other
-    validations:
-      required: true
-  - type: dropdown
-    id: host
-    attributes:
-      label: On which host OS are you running the build script and observing this problem?
-      multiple: false
-      options:
-        - Ubuntu 24.04 Noble
-        - Ubuntu 22.04 Jammy
-        - Debian 13 Trixie
-        - Debian 12 Bookworm
-        - Other
-    validations:
-      required: true
-  - type: checkboxes
-    id: host-is-wsl
-    attributes:
-      label: Are you building on Windows WSL2?
-      options:
-        - label: Yes, my Ubuntu/Debian/OtherOS is running on WSL2
-          required: false
-  - type: input
-    id: logs
-    attributes:
-      label: Relevant log URL
-      description: |
-        Run with `SHARE_LOG=yes`, at the end of log you will get something like this
-        ```[🌿] Log uploaded, share URL: [ https://paste.armbian.com/xxx ]```
-
-        Paste the URL here:
-      placeholder: https://paste.armbian.com/xxx
-  - type: checkboxes
-    id: terms
-    attributes:
-      label: Code of Conduct
-      description: By submitting this issue, you agree to follow our [Code of Conduct](https://github.com/armbian/build/blob/master/.github/CODE_OF_CONDUCT.md)
-      options:
-        - label: I agree to follow this project's Code of Conduct
-          required: true

.github/ISSUE_TEMPLATE/config.yml

@@ -16,7 +16,7 @@ contact_links:
     url: https://bugzilla.kernel.org/
     about: If you are using upstream Linux kernel
   - name: Issue with armbian-config
-    url: https://github.com/armbian/config/issues/new
+    url: https://github.com/armbian/configng/issues/new
     about: Utility for configuring your board, adjusting services and installing applications.
   - name: Issue with infrastructure
     url: https://github.com/armbian/mirror/issues/new

.github/ISSUE_TEMPLATE/feature.yml

@@ -1,28 +0,0 @@
-name: Armbian Linux Build Framework Feature request
-description: Suggest a feature that you want to see implemented
-title: "I would like to ..."
-labels: ["feature"]
-assignees: "igorpecovnik"
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Thanks for taking the time to fill out a feature reqest. A request does not guarantee consideration.
-  - type: textarea
-    id: what
-    attributes:
-      label: Which feature would you like to have?
-      description: "<br>What do you miss?<br>"
-      placeholder: Tell us what is missing!
-      value: "I think ..."
-    validations:
-      required: true
-  - type: checkboxes
-    id: financing
-    attributes:
-      label: Funding
-      description: "
-      You are welcome to submit your feature request, but keep in mind we can only afford to cover minor tasks. If we decide to.<br>"
-      options:
-        - label: "[I am willing to cover expenses](https://www.armbian.com/contact/)"
-          required: false

.github/PULL_REQUEST_TEMPLATE.md

@@ -2,6 +2,7 @@
 
 _Please include a summary of the change and which issue is fixed. Please also include relevant motivation and context. List any dependencies that are required for this change._
 
+[GitHub issue](https://github.com/armbian/build/labels/Task%2FTo-Do) reference: 
 [Jira](https://armbian.atlassian.net/jira) reference number [AR-9999]
 
 # Documentation summary for feature / change

.github/dependabot.yml

@@ -4,3 +4,8 @@ updates:
     directory: "/"
     schedule:
       interval: "weekly"
+
+  - package-ecosystem: "pip"
+    directory: "/"
+    schedule:
+      interval: "weekly"

.github/generate_CODEOWNERS.sh

@@ -3,18 +3,24 @@
 SRC="$(realpath "${BASH_SOURCE%/*}/../")"
 
 # Dummy function for successful source
-function display_alert() {
-	:
-}
-function enable_extension() {
-	:
+function display_alert() { :; }
+function enable_extension() { :; }
+function add_packages_to_image() { :; }
+
+function run_hook() {
+	local hook_point="$1"
+	while read -r hook_point_function; do
+		"${hook_point_function}"
+	done < <(compgen -A function | grep "^${hook_point}__" | LC_ALL=C.UTF-8 sort)
 }
 
 # $1: board config
 function generate_for_board() {
 	local board_config="$1"
 	(
+		BOARD="${board_config%.*}"
 		source "${SRC}/config/boards/${board_config}"
+
 		LINUXFAMILY="${BOARDFAMILY}"
 
 		[[ -n "${BOARD_MAINTAINER}" ]] || return
@@ -26,13 +32,18 @@ function generate_for_board() {
 				source "${SRC}/config/sources/common.conf"
 				source "${SRC}/config/sources/${ARCH}.conf"
 
+				run_hook "post_family_config"
+				run_hook "post_family_config_branch_${BRANCH,,}"
+
 				[[ -z $LINUXCONFIG ]] && LINUXCONFIG="linux-${LINUXFAMILY}-${BRANCH}"
-				[[ -z $KERNELPATCHDIR ]] && KERNELPATCHDIR="$LINUXFAMILY-$BRANCH"
+				[[ -z $KERNELPATCHDIR ]] && KERNELPATCHDIR="archive/${LINUXFAMILY}-${KERNEL_MAJOR_MINOR}"
+				[[ -z $BOOTPATCHDIR ]] && BOOTPATCHDIR="u-boot-${LINUXFAMILY}"
+				[[ -z $ATFPATCHDIR ]] && ATFPATCHDIR="atf-${LINUXFAMILY}"
 
 				cat <<-EOF
 					config/boards/${board_config}			${maintainers}
 					config/kernel/${LINUXCONFIG%-*}-*.config	${maintainers}
-					sources/families/${LINUXFAMILY}.conf		${maintainers}
+					sources/families/${BOARDFAMILY}.conf		${maintainers}
 					patch/kernel/${KERNELPATCHDIR%-*}-*/		${maintainers}
 				EOF
 
@@ -41,6 +52,16 @@ function generate_for_board() {
 					patch_archive="${patch_archive%/}"
 					echo "patch/kernel/${patch_archive%-*}-*/	${maintainers}"
 				fi
+
+				if [[ -n "${BOOTCONFIG}" && "${BOOTCONFIG}" != "none" ]]; then
+					while read -r d; do
+						echo "patch/u-boot/${d}/		${maintainers}"
+					done < <(echo "${BOOTPATCHDIR}" | xargs -n1)
+				fi
+
+				if [[ -n "${ATFSOURCE}" && "${ATFSOURCE}" != "none" ]]; then
+					echo "patch/atf/${ATFPATCHDIR}/			${maintainers}"
+				fi
 			)
 		done < <(echo "${KERNEL_TARGET}" | tr ',' '\n')
 	)
@@ -68,9 +89,9 @@ function merge() {
 	local file
 	while read -r file; do
 		declare -a maintainers
-		readarray -t maintainers < <(echo "${codeowners["$file"]}" | xargs -n1 | sort -u)
+		readarray -t maintainers < <(echo "${codeowners["$file"]}" | xargs -n1 | LC_ALL=C.UTF-8 sort -u)
 		echo "${file}		${maintainers[*]}"
-	done < <(printf "%s\n" "${!codeowners[@]}" | sort)
+	done < <(printf "%s\n" "${!codeowners[@]}" | LC_ALL=C.UTF-8 sort)
 }
 
 cat <<-EOF >"${SRC}/.github/CODEOWNERS"

.github/labeler.yml

@@ -10,22 +10,37 @@
 #
 # Please keep the labels sorted and deduplicated.
 
+"Needs review":
+- changed-files:
+  - any-glob-to-any-file: '**'
+
 "Hardware":
 - all:
   - changed-files:
     - any-glob-to-any-file: ['patch/**/*','config/**/*']
-    - any-glob-to-all-files: ['!config/cli/**/*','!config/desktop/**/*','!config/distributions/**/*']
+    - all-globs-to-all-files: ['!config/cli/**/*','!config/desktop/**/*','!config/distributions/**/*']
 
 "Framework":
 - all:
   - changed-files:
-    - any-glob-to-any-file: ['lib/**/*','tools/**/*','config/cli/**/*','packages/**/*','extensions/**/*']
+    - any-glob-to-any-file: ['lib/**/*','tools/**/*','config/cli/**/*','extensions/**/*']
 
-"Actions scripts":
+"BSP":
+- all:
+  - changed-files:
+    - any-glob-to-any-file: ['packages/**/*']
+
+"GitHub Actions":
 - all:
   - changed-files:
     - any-glob-to-any-file: ['.github/workflows/**/*']
 
+"GitHub":
+- all:
+  - changed-files:
+    - any-glob-to-any-file: ['.github/**/*']
+    - all-globs-to-any-file: ['!.github/workflows/**/*']
+
 "Desktop":
 - all:
   - changed-files:

.github/labels.yml

@@ -18,19 +18,31 @@
   description: "Can potentially break core functionality"
 - name: "Bug"
   color: "F92C01"
-  description: "Something isn't working well"
+  description: "Something isn't working as it should"
 - name: "Bugfix"
   color: "F92C01"
   description: "Pull request is fixing a bug"
+- name: "Dependencies"
+  color: "0366d6"
+  description: "Pull requests that update a dependency"
 - name: "Discussion"
-  color: "33B478"
-  description: "Issue is being discussed. Undetermined."
+  color: "EDFFE3"
+  description: "Being discussed - Voice your opinions :)"
 - name: "Duplicate"
   color: "f4bd13"
   description: "Issue is already present"
+- name: "Feature Request"
+  color: "1aac63"
+  description: "Feature suggestion"
+- name: "Good first issue"
+  color: "ffb3ff"
+  description: "Feel free to contribute :) "
 - name: "Not framework bug"
   color: "CD456C"
   description: "Bug in 3rd party component"
+- name: "Python"
+  color: "2b67c6"
+  description: "Pull requests that update Python code "
 - name: "User error"
   color: "CD456C"
   description: "A mistake that is made by the user"
@@ -43,18 +55,27 @@
 - name: "size/large"
   color: "ededed"
   description: "PR with 250 lines or more"
+- name: "Task/To-Do"
+  color: "2f95f1"
+  description: "Project management: To-Do or task(s) someone is working on"
 - name: "Desktop"
   color: "bfd4f2"
   description: "Graphical user interface"
 - name: "Hardware"
   color: "bfd4f2"
-  description: "Hardware related - kernel, u-boot, patches"
+  description: "Hardware related like kernel, U-Boot, ..."
 - name: "Framework"
   color: "bfd4f2"
   description: "Framework components"
-- name: "Actions scripts"
+- name: "BSP"
   color: "bfd4f2"
-  description: "GitHub Actions scripts"
+  description: "Board Support Packages"
+- name: "GitHub Actions"
+  color: "bfd4f2"
+  description: "GitHub Actions code"
+- name: "GitHub"
+  color: "bfd4f2"
+  description: "GitHub-related changes like labels, templates, ..."
 - name: "Patches"
   color: "bfd4f2"
   description: "Patches related to kernel, U-Boot, ..."
@@ -74,14 +95,17 @@
   color: "AEE054"
   description: "Seeking for review"
 - name: "Can be closed?"
-  color: "5319e7"
-  description: "Ping developers on stalled issues / PR"
+  color: "9b75fc"
+  description: "Ping developers on stalled issue / PR"
 - name: "Build"
-  color: "1d76db"
-  description: "Executing build train"
+  color: "5ee3d0"
+  description: "Executing build train (permission needed)"
 - name: "Needs Documentation"
-  color: "#4FD1EF"
+  color: "4FD1EF"
   description: "New feature needs documentation entry"
+- name: "Documentation finished"
+  color: "0052CC"
+  description: "New feature was properly added to docs"
 - name: "Improper usage"
-  color: "#CD456C"
+  color: "CD456C"
   description: "Provided input is not in the expected data format or structure"

.github/workflows/adjust-maintainers.yml

@@ -0,0 +1,121 @@
+name: "Sync maintainers status"
+
+# Script connects to the contacts database once per hour and updates BOARD_MAINTAINER property in the board config files.
+# If there are any changes, it opens a Pull Request
+#
+# spdx-id: GPL-2.0-or-later
+# copyright-owner: @igorpecovnik
+
+on:
+  schedule:
+    - cron: "0 * * * *"
+  workflow_dispatch:
+
+jobs:
+
+  Build:
+    name: "Maintainers sync"
+    runs-on: ubuntu-latest
+    if: ${{ github.repository_owner == 'armbian' }}
+    steps:
+
+      - name: "Checkout build repo"
+        uses: actions/checkout@v4
+        with:
+          repository: armbian/build
+          ref:  main
+          fetch-depth: 0
+          clean: false
+
+      - name: "Install SSH key for storage"
+        uses: shimataro/ssh-key-action@v2
+        with:
+          key: ${{ secrets.KEY_UPLOAD }}
+          known_hosts: ${{ secrets.KNOWN_HOSTS_ARMBIAN_UPLOAD }}
+          if_key_exists: replace
+
+      - name: "Download JSON file"
+        run: |
+
+          # download json that is prepared in https://github.com/armbian/armbian.github.io
+          curl -o /tmp/armbian_maintainers.json https://github.armbian.com/maintainers.json
+
+      - name: "Update maintainers"
+        run: |
+
+          # reset all maintainers so we generate from scratch
+          sed -i "s/BOARD_MAINTAINER.*/BOARD_MAINTAINER=\"\"/" config/boards/*.{conf,wip,eos,tvb}
+
+          # extract values fron JSON
+          declare -A MAINTAINERS
+          {
+            # By default, bash run the pipe command in subshells
+            # which make variable can't be assigned to.
+            # And yes, lastpipe can solve it
+            # But this is better.
+            while read -r i; do
+              NAME="$(echo "$i" | jq --raw-output '.First_Name')"
+              BOARD="$(echo "$i" | jq --raw-output '.Maintaining')"
+              MAINTAINER_GITHUB="$(echo "$i" | jq --raw-output '.Github' | cut -d"/" -f4)"
+              if [[ "$BOARD" != null && "$MAINTAINER_GITHUB" != null ]]; then
+                echo "- [$NAME](https://github.com/${MAINTAINER_GITHUB})"
+                while read -r i; do
+                  echo -e "  - $i"
+                  MAINTAINERS["$i"]+="$MAINTAINER_GITHUB "
+                done < <( echo "$BOARD" | sed "s/,/\n/g" | sort -u )
+              fi
+            done < <(jq -c '.[]' /tmp/armbian_maintainers.json)
+
+            for cfg in config/boards/*.{conf,wip,csc,eos,tvb}; do
+              board_name="$(echo "${cfg##*/}" | sed -E 's/\..*//')"
+              declare -a maintainers
+              readarray -t maintainers < <(echo "${MAINTAINERS[${board_name}]}" | xargs -n1 | sort -u)
+              sed -i "s/BOARD_MAINTAINER=.*/BOARD_MAINTAINER=\"${maintainers[*]}\"/" "${cfg}"
+            done
+          } >> "$GITHUB_STEP_SUMMARY"
+
+      - name: "Mark csc for no maintainer"
+        run: |
+
+          grep BOARD_MAINTAINER=\"\" config/boards/*.{wip,conf} | cut -d":" -f1 |
+            while read -r line; do
+              if [[ "${line}" != "${line/.conf/.csc}" ]]; then
+                mv -v "$line" "${line/.conf/.csc}"
+              fi
+              if [[ "${line}" != "${line/.wip/.csc}" ]]; then
+                mv -v "$line" "${line/.wip/.csc}"
+              fi
+            done
+
+      - name: "Re-generate CODEOWNERS"
+        run: |
+
+          ./.github/generate_CODEOWNERS.sh
+
+      - name: Create Pull Request
+        id: cpr
+        uses: peter-evans/create-pull-request@v7
+        with:
+          token: ${{ secrets.GITHUB_TOKEN }}
+          commit-message: '`Automatic` board configs status synchronise'
+          signoff: false
+          branch: update-maintainers
+          delete-branch: true
+          title: '`Automatic` board configs status synchronise'
+          body: |
+            Update maintainers and board status
+
+            - synced status from the database
+            - rename to .`csc` where we don't have anyone
+
+            If you want to become a board maintainer, [adjust data here](https://www.armbian.com/update-data/).
+
+            Ref:
+              - [Board Maintainers Procedures and Guidelines](https://docs.armbian.com/Board_Maintainers_Procedures_and_Guidelines/)
+              - [Contribute](https://docs.armbian.com/Process_Contribute/)
+
+          labels: |
+            Needs review
+          #assignees: igorpecovnik
+          #reviewers: Must be org collaborator
+          draft: false

.github/workflows/build-board-list.yml

@@ -1,20 +0,0 @@
-name: Rebuild board list in GHA menu
-on:
-  push:
-    paths:
-      - 'config/boards/*.*'
-    branches: [ main ]
-
-jobs:
-
-  Run:
-    name: "Execute workflow"
-    if: ${{ github.repository_owner == 'Armbian' }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Repository Dispatch
-        uses: peter-evans/repository-dispatch@v3
-        with:
-          token: ${{ secrets.ACCESS_TOKEN }}
-          repository: armbian/os
-          event-type: "Refresh board list"

.github/workflows/build-train.yml

@@ -1,21 +0,0 @@
-name: Run build train on config changes
-on:
-  push:
-    branches:
-      - 'main'
-    paths:
-      - 'config/*.config'
-
-jobs:
-
-  Run:
-    name: "Execute workflow"
-    if: ${{ github.repository_owner == 'Armbian' }}
-    runs-on: ubuntu-latest
-    steps:
-      - name: Repository Dispatch
-        uses: peter-evans/repository-dispatch@v3
-        with:
-          token: ${{ secrets.ACCESS_TOKEN }}
-          repository: armbian/os
-          event-type: "Repository update"

.github/workflows/clean-workflow-logs.yml

@@ -0,0 +1,27 @@
+name: Clean Workflow Logs
+
+on:
+  schedule:
+    - cron: "0 0 * * 1"  # Runs "At 00:00 on Monday." (see https://crontab.guru)
+
+  workflow_dispatch:
+    inputs:
+      runs_older_than:
+        description: "The amount of days old to delete"
+        default: "21"
+        required: false
+
+env:
+  SCHEDULED_RUNS_OLDER_THAN: "21"
+  SCHEDULED_RUNS_TO_KEEP: "0"
+
+jobs:
+  clean-logs:
+    runs-on: ubuntu-latest
+    permissions:
+      actions: write
+    steps:
+      - uses: igorjs/gh-actions-clean-workflow@v6
+        with:
+          runs_older_than: ${{ github.event.inputs.runs_older_than || env.SCHEDULED_RUNS_OLDER_THAN }}
+          runs_to_keep: ${{ github.event.inputs.runs_to_keep || env.SCHEDULED_RUNS_TO_KEEP }}

.github/workflows/forked-helper.yml

@@ -1,4 +1,5 @@
 name: Forked Helper
+run-name: Forked Helper dispatch on ${{ github.event_name }}
 
 on:
   push:
@@ -8,28 +9,18 @@ on:
   workflow_dispatch:
 
 jobs:
-  fork-repository-dispatch:
-    name: 📢 Run repository dispatch to default fork branch
-    if: ${{ github.repository_owner != 'armbian' }}
+  dispatch-on-forked-repo:
+    name: 📢 Run repository dispatch on fork
+    env:
+      DISPATCH_SECRET: ${{ secrets.ARMBIAN_SELF_DISPATCH_TOKEN }}
+    if: ${{ github.repository_owner != 'armbian' }} # Run only on forks
     runs-on: ubuntu-latest
     steps:
-      - name: Assign secret
-        id: get_dispatch_secret
-        run: echo 'name=dispatch_secret::${{ secrets.ARMBIAN_SELF_DISPATCH_TOKEN }}' >> $GITHUB_OUTPUT
-      - name: Get event details
-        id: get_event_details
-        # Process JSON according https://github.com/orgs/community/discussions/26288
-        run: |
-          JSON=$(cat ${{ github.event_path }})
-          JSON="${JSON//'%'/'%25'}"
-          JSON="${JSON//$'\n'/'%0A'}"
-          JSON="${JSON//$'\r'/'%0D'}"
-          echo "name=event_details::${JSON}" >> $GITHUB_OUTPUT
-      - name: Dispatch event on forked repostitory
-        if: steps.get_dispatch_secret.outputs.dispatch_secret
+      - name: Dispatch event on forked repository
+        if: ${{ env.DISPATCH_SECRET != '' }}  # Check that the secret has been set, if not, exit
         uses: peter-evans/repository-dispatch@v3
         with:
-          token: ${{ steps.get_dispatch_secret.outputs.dispatch_secret }}
+          token: ${{ env.DISPATCH_SECRET }}
           repository: ${{ github.repository }}
           event-type: armbian
           client-payload: >
@@ -38,5 +29,5 @@ jobs:
               "ref": "${{ github.ref }}",
               "base_ref": "${{ github.base_ref }}",
               "sha": "${{ github.sha }}",
-              "event_details": ${{ steps.get_event_details.outputs.event_details }}
+              "event_details": ${{ toJSON(github.event) }}
             }

.github/workflows/issue-welcome-first-time.yml

@@ -0,0 +1,27 @@
+name: "Welcome first-time issue contributor"
+
+on:
+  issues:
+    types: opened
+
+jobs:
+  welcome-first-time-contributor:
+    runs-on: ubuntu-latest
+    permissions:
+      issues: write
+      pull-requests: write
+    steps:
+      - uses: plbstl/first-contribution@v3
+        with:
+          labels: "Good first issue"
+          issue-opened-msg: |
+            ### Hey @{fc-author}! 👋
+
+            Thanks for opening your first issue with the Armbian project — we’re glad to have you here! 🧡  
+            Your input doesn’t just help us improve the project — it benefits everyone who uses Armbian.
+
+            If you'd like to stay informed about project updates or collaborate more closely with the team,  
+            you can optionally share some personal contact preferences at [armbian.com/update-data](https://www.armbian.com/update-data/).  
+            This helps us keep in touch without relying solely on GitHub notifications.
+
+            Also, don’t forget to ⭐ star the repo to support the work — and welcome aboard! 🚀

.github/workflows/labels-from-yml.yml

@@ -1,30 +1,32 @@
-name: Set PR and issues labels from yaml
+name: Sync Labels from YAML
+run-name: Sync Labels from YML on ${{ github.event_name }}
 
 on:
   workflow_dispatch:
   push:
     branches:
-      - 'main'
+      - "main"
     paths:
-      - '.github/labels.yml'
+      - ".github/labels.yml"
   pull_request:
     paths:
-      - '.github/labels.yml'
+      - ".github/labels.yml"
 
 jobs:
   labeler:
     permissions:
-      contents: read  # for actions/labeler to determine modified files
-      pull-requests: write  # for actions/labeler to add labels to PRs
+      contents: read # for actions/labeler to determine modified files
+      pull-requests: write # for actions/labeler to add labels to PRs
       issues: write # for actions/labeler to add labels to issues
+
     if: ${{ github.repository_owner == 'Armbian' }}
     runs-on: ubuntu-latest
+
     steps:
-      -
-        name: Checkout
+      - name: Checkout
         uses: actions/checkout@v4
-      -
-        name: Run Labeler
+
+      - name: Run Labeler
         uses: crazy-max/ghaction-github-labeler@v5
         with:
           github-token: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/merge-announce.yml

@@ -0,0 +1,20 @@
+name: "Announce PR merge to Discord"
+
+on:
+  push:
+    branches: [ main ]
+
+jobs:
+  announcepush:
+    runs-on: ubuntu-latest
+    steps:
+      - name: Get repo
+        uses: actions/checkout@v4
+        with:
+          ref: ${{ github.event.pull_request.head.sha }}
+      - name: Send push to Discord
+        run: |
+          curl -i -H "Accept: application/json" -H "Content-Type: application/json" -X POST --data \
+          "{\"username\": \"Github\", \"avatar_url\": \"${{ secrets.AVATARURL }}\", \"content\": \"\
+          :white_check_mark: **Merged** into [$GITHUB_REPOSITORY](<$GITHUB_SERVER_URL/$GITHUB_REPOSITORY>) by [$GITHUB_ACTOR](<$GITHUB_SERVER_URL/$GITHUB_ACTOR>) - \
+          [Link](<$GITHUB_SERVER_URL/$GITHUB_REPOSITORY/commit/$GITHUB_SHA>): *$(git show -s --format=%s)*\"}" ${{ secrets.WEBHOOKURL }}

.github/workflows/open-jira-ticket.yml

@@ -1,4 +1,6 @@
 name: Jira Sync
+run-name: 'Sync Jira - Issue #${{ github.event.issue.number }} ("${{ github.event.issue.title }}")'
+
 on:
   issues:
     types: [opened]
@@ -6,6 +8,7 @@ jobs:
   sync:
     name: Sync Items
     runs-on: ubuntu-latest
+
     steps:
       - name: Sync
         uses: igorpecovnik/github-action-issue-to-jira@master

.github/workflows/pr-announce.yml

@@ -0,0 +1,25 @@
+name: "Announce PR on Discord for review"
+run-name: 'Announce PR #${{ github.event.pull_request.number }} on Discord for review'
+
+on:
+  pull_request:
+    types: [ labeled ]
+
+jobs:
+  Announce:
+    permissions:
+      pull-requests: read
+
+    runs-on: ubuntu-latest
+    if: ${{ github.repository == 'armbian/build' && github.event.label.id == '6210849975' }}
+    steps:
+      - name: Get repo
+        uses: actions/checkout@v4
+        with:
+          ref: ${{ github.event.pull_request.head.sha }}
+      - name: Discord webhook
+        run: |
+          curl -i -H "Accept: application/json" -H "Content-Type: application/json" -X POST --data \
+          "{\"username\": \"Github\", \"avatar_url\": \"${{ secrets.AVATARURL }}\", \"content\": \"\
+          :arrow_heading_up: **Pull request** to [$GITHUB_REPOSITORY](<$GITHUB_SERVER_URL/$GITHUB_REPOSITORY>) by [$GITHUB_ACTOR](<$GITHUB_SERVER_URL/$GITHUB_ACTOR>) - **Please review!** \
+          :point_right: [Link](<$GITHUB_SERVER_URL/$GITHUB_REPOSITORY/pull/${{github.event.pull_request.number}}>): *$(git show -s --format=%s)*\"}" ${{ secrets.WEBHOOKURL }}

.github/workflows/pr-auto-labeler.yml

@@ -1,32 +1,69 @@
-name: "Automatic Pull Request Labeling"
-#
-# Set labels for pull requests automatically based on size (modified via job 'label-size') and file categories (modified via .github/labeler)
-#
+name: Automatic Pull Request Labeling
 
-on:
-- pull_request_target
+# Sets labels automatically based on:
+# - PR size (job: label-size)
+# - File categories using .github/labeler config (job: label-category)
+# - PR creation date for quarterly tracking (job: label-by-date)
+# - Removes "Ready to merge" label on PR update (job: label-remove)
+
+run-name: 'Set labels - PR #${{ github.event.pull_request.number }} ("${{ github.event.pull_request.title }}")'
+
+on: pull_request_target
+
+# Grant required permissions globally
+permissions:
+  contents: read          # Required for checking changed files
+  pull-requests: write    # Required for labeling PRs
+  issues: write           # Required for adding/removing labels
 
 jobs:
-  
-  label-category:
-    permissions:
-      contents: read  # for actions/labeler to determine modified files
-      pull-requests: write  # for actions/labeler to add labels to PRs
+  label-remove:
+    name: "Remove Ready to merge"
+    if: ${{ github.event.action == 'opened' || github.event.action == 'reopened' || github.event.action == 'synchronize' }}
     runs-on: ubuntu-latest
+
     steps:
-    - uses: actions/checkout@v4
-    - uses: actions/labeler@v5
-      with:
-        repo-token: "${{ secrets.GITHUB_TOKEN }}"
+      - name: Checkout the pull request
+        uses: actions/checkout@v4
+
+      - name: Check for label using GH CLI
+        id: check
+        run: |
+          gh pr view ${{ github.event.pull_request.number }} --json labels -q '.labels[].name' | grep -q 'Ready to merge' && echo "has_label=true" >> $GITHUB_OUTPUT || echo "has_label=false" >> $GITHUB_OUTPUT
+        env:
+          GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Remove "Ready to merge" label
+        if: steps.check.outputs.has_label == 'true'
+        uses: PauMAVA/add-remove-label-action@v1.0.3
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          add: ""
+          remove: "Ready to merge"
+
+  label-category:
+    name: "Category Labels"
+    runs-on: ubuntu-latest
+    if: ${{ github.event.action == 'opened' || github.event.action == 'reopened' || github.event.action == 'synchronize' }}
+
+    steps:
+      # Checks out the repository to read files for matching with labeler config
+      - uses: actions/checkout@v4
+
+      # Applies labels based on the .github/labeler.yml config
+      - uses: actions/labeler@v5
+        with:
+          repo-token: "${{ secrets.GITHUB_TOKEN }}"
 
   label-size:
-    permissions:
-      contents: read  # for pascalgn/size-label-action to determine modified files
-      pull-requests: write  # for pascalgn/size-label-action to add labels to PRs
+    name: "Size Label"
     runs-on: ubuntu-latest
+    if: ${{ github.event.action == 'opened' || github.event.action == 'reopened' || github.event.action == 'synchronize' }}
+
     steps:
-      - name: size-label
-        uses: "pascalgn/size-label-action@v0.5.2"
+      # Automatically adds size labels based on total changed lines
+      - name: Label by size
+        uses: pascalgn/size-label-action@v0.5.5
         env:
           GITHUB_TOKEN: "${{ secrets.GITHUB_TOKEN }}"
         with:
@@ -36,3 +73,41 @@ jobs:
               "50": "medium",
               "250": "large"
             }
+
+  label-by-date:
+    name: "Date label (Quarters)"
+    runs-on: ubuntu-latest
+    if: ${{ github.event.action == 'opened' || github.event.action == 'reopened' || github.event.action == 'synchronize' }}
+
+    steps:
+      # Determines the label (02, 05, 08, 11) based on PR creation month
+      - name: Determine quarter label
+        env:
+          PR_CREATED_AT: ${{ github.event.pull_request.created_at }}
+        run: |
+          echo "PR created at: $PR_CREATED_AT"
+
+          # Extract the numeric month (e.g., 04 for April)
+          MONTH=$(date -d "$PR_CREATED_AT" +%m | sed 's/^0*//')
+          echo "Month extracted: $MONTH"
+
+          # Determine quarter-end label based on month
+          if [ "$MONTH" -le 2 ] || [ "$MONTH" -eq 12 ]; then
+            LABEL="02"
+          elif [ "$MONTH" -le 5 ]; then
+            LABEL="05"
+          elif [ "$MONTH" -le 8 ]; then
+            LABEL="08"
+          else
+            LABEL="11"
+          fi
+
+          # Set as environment variable for next step
+          echo "LABEL=${LABEL}" >> $GITHUB_ENV
+
+      # Adds the quarter label to the PR
+      - name: Add quarter label
+        uses: PauMAVA/add-remove-label-action@v1.0.3
+        with:
+          github_token: ${{ secrets.GITHUB_TOKEN }}
+          add: "${{ env.LABEL }}"

.github/workflows/pr-build-artifacts.yml

@@ -1,37 +1,34 @@
-name: Generate artifacts on PR if 'Build' label exists
+name: Generate Artifacts on PR if 'Build' label exists
+run-name: "Generate artifacts - PR #${{ github.event.pull_request.number }} - by @${{ github.actor }}"
 #
-# If PR is labeled with "Build" and you are a member of "Release manager" team it will start a build train (additional security feature)
+# If PR is labeled with "Build" and you are a member of "Release manager" team it will start a build train (additional security feature).
+# In the run name, ${{ github.actor }} shows who's privileges are used for this run.
 #
 
-on:
-  pull_request:
-    types: [opened, reopened, synchronize, labeled]
+on: pull_request_target
 
 jobs:
-
   Check:
     permissions:
       pull-requests: read
 
-    name: "Check if 'Build' label is active and user is authorized"
-    if: contains(github.event.pull_request.labels.*.name, 'Build')
+    name: Check label and authorization  
     runs-on: Linux
     outputs:
       member: ${{ steps.checkUserMember.outputs.isTeamMember }}
     steps:
-
-      -  uses: tspascoal/get-user-teams-membership@v3
-         id: checkUserMember
-         with:
-           username: ${{ github.actor }}
-           organization: armbian
-           team: "Release manager"
-           GITHUB_TOKEN: ${{ secrets.ORG_MEMBERS }}
+      - uses: tspascoal/get-user-teams-membership@v3
+        if: contains(github.event.pull_request.labels.*.name, 'Build')
+        id: checkUserMember
+        with:
+          username: ${{ github.actor }}
+          organization: armbian
+          team: "Release manager"
+          GITHUB_TOKEN: ${{ secrets.ORG_MEMBERS }}
 
   Compile:
-
     needs: Check
-    name: "Update artifacts"
+    name: Generate artifacts
     concurrency:
       group: pipeline-pr-${{github.event.pull_request.number}}
       cancel-in-progress: true

.github/workflows/pr-kernel-security-analysis.yml

@@ -1,10 +1,11 @@
-name: Kernel hardening analysis
+name: Kernel Hardening Analysis
+run-name: 'Check kernel security options - PR #${{ github.event.pull_request.number }} ("${{ github.event.pull_request.title }}")'
 #
 #  Check the Linux kernel options against security hardening
 #
 #  Attention! Changing security parameters may also affect system performance and functionality of userspace software!
 #  More info:
-#  https://github.com/a13xp0p0v/kconfig-hardened-check/blob/master/README.md
+#  https://github.com/a13xp0p0v/kernel-hardening-checker
 
 on:
   workflow_dispatch:
@@ -20,36 +21,34 @@ concurrency:
   cancel-in-progress: true
 
 jobs:
-
   Analysis:
-
     name: Check kernel security options
     runs-on: ubuntu-latest
     if: ${{ github.repository_owner == 'Armbian' }}
+
     steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+        with:
+          fetch-depth: 0
 
-       - name: Checkout repository
-         uses: actions/checkout@v4
-         with:
-           fetch-depth: 0
+      - name: Get changed files
+        id: changed-files
+        uses: tj-actions/changed-files@d52d20fa3f981cb852b861fd8f55308b5fe29637 # v46.0.3
 
-       - name: Get changed files
-         id: changed-files
-         uses: tj-actions/changed-files@v44
+      - name: Checkout repository
+        uses: actions/checkout@v4
+        with:
+          repository: a13xp0p0v/kconfig-hardened-check
+          path: kconfig-hardened-check
 
-       - name: Checkout repository
-         uses: actions/checkout@v4
-         with:
-           repository: a13xp0p0v/kconfig-hardened-check
-           path: kconfig-hardened-check
-
-       - name: Check kernel config for security issues
-         # Run kernel-hardening-checker for each kernel config file excluding RISC-V configs, since they are not supported yet.
-         # See https://github.com/a13xp0p0v/kernel-hardening-checker/issues/56
-         # sed explanation: 1) Put spaces in front of every line 2) replace colored output with emojis since GitHub Actions job summaries don't support colored output
-         run: |
-           for file in ${{ steps.changed-files.outputs.all_changed_files }}; do
-               if [[ "${file}" = config/kernel/*.config && ! $(head -n 10 "${file}" | grep -q "riscv") ]]; then
-                   kconfig-hardened-check/bin/kernel-hardening-checker -m show_fail -c $file | sed 's/^/     /; s/\x1b\[32m/✅ /; s/\x1b\[31m/❌ /; s/\x1b\[0m//' >> $GITHUB_STEP_SUMMARY
-               fi
-           done
+      - name: Check kernel config for security issues
+        # Run kernel-hardening-checker for each kernel config file excluding RISC-V configs, since they are not supported yet.
+        # See https://github.com/a13xp0p0v/kernel-hardening-checker/issues/56
+        # sed explanation: 1) Put spaces in front of every line 2) replace colored output with emojis since GitHub Actions job summaries don't support colored output
+        run: |
+          for file in ${{ steps.changed-files.outputs.all_changed_files }}; do
+              if [[ "${file}" = config/kernel/*.config && ! $(head -n 10 "${file}" | grep -q "riscv") ]]; then
+                  kconfig-hardened-check/bin/kernel-hardening-checker -m show_fail -c $file | sed 's/^/     /; s/\x1b\[32m/✅ /; s/\x1b\[31m/❌ /; s/\x1b\[0m//' >> $GITHUB_STEP_SUMMARY
+              fi
+          done

.github/workflows/pr-label-on-approved.yml

@@ -0,0 +1,21 @@
+on: pull_request_review
+name: Label approved pull requests
+
+permissions:
+  contents: read          # Required for checking changed files
+  pull-requests: write    # Required for labeling PRs
+  issues: write           # Required for adding/removing labels
+
+jobs:
+  labelWhenApproved:
+    if: ${{ github.repository_owner == 'armbian' }}
+    name: Label when approved
+    runs-on: ubuntu-latest
+    steps:
+    - name: Label when approved
+      uses: pullreminders/label-when-approved-action@master
+      env:
+        APPROVALS: "1"
+        GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+        ADD_LABEL: "Ready to merge"
+        REMOVE_LABEL: "Needs%20review"

.github/workflows/pr-lint-scripts.yml

@@ -1,4 +1,5 @@
 name: Lint on Scripts
+run-name: 'Shellcheck - PR #${{ github.event.pull_request.number }} ("${{ github.event.pull_request.title }}")'
 #
 # Run ShellCheck on all scripts and generate report as build artifact
 #
@@ -16,45 +17,43 @@ concurrency:
   cancel-in-progress: true
 
 jobs:
-
   Shellcheck:
-
     name: Shell script analysis
     runs-on: ubuntu-latest
     if: ${{ github.repository_owner == 'Armbian' }}
+
     steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+        with:
+          fetch-depth: 2
 
-       - name: Checkout repository
-         uses: actions/checkout@v4
-         with:
-           fetch-depth: 2
+      - name: Get changed files
+        id: changed-files
+        uses: tj-actions/changed-files@d52d20fa3f981cb852b861fd8f55308b5fe29637 # v46.0.3
 
-       - name: Get changed files
-         id: changed-files
-         uses: tj-actions/changed-files@v44
+      - name: List all changed files
+        run: |
 
-       - name: List all changed files
-         run: |
+          # Use framework internal mechanism for checking `lib` and `extensions` code only one file is passed,
+          # and source's are followed, thus the whole project is "understood" by shellcheck.
+          # For example, when checking individual files, one variable might be thought "unused" because it
+          # is only used in another file, which does not happen when done properly.
 
-           # Use framework internal mechanism for checking `lib` and `extensions` code only one file is passed,
-           # and source's are followed, thus the whole project is "understood" by shellcheck.
-           # For example, when checking individual files, one variable might be thought "unused" because it
-           # is only used in another file, which does not happen when done properly.
+          bash lib/tools/shellcheck.sh
 
-           bash lib/tools/shellcheck.sh
+          ret=0
 
-           ret=0
+          for file in ${{ steps.changed-files.outputs.all_changed_files }}; do
 
-           for file in ${{ steps.changed-files.outputs.all_changed_files }}; do
+              if [[ ! "${file}" =~ lib/|extensions/|.py|.service|.rules|.network|.netdev ]]; then
+                  if grep -qE "^#\!/.*bash" $file; then
 
-               if [[ ! "${file}" =~ lib/|extensions/|.py|.service|.rules|.network|.netdev ]]; then
-                   if grep -qE "^#\!/.*bash" $file; then
+                      shellcheck --severity=error $file || ret=$?
 
-                       shellcheck --severity=error $file || ret=$?
+                  fi
+              fi
 
-                   fi
-               fi
+          done
 
-           done
-
-           exit $ret
+          exit $ret

.github/workflows/pr-welcome-first-time.yml

@@ -0,0 +1,26 @@
+name: "Welcome first-time PR contributor"
+
+on:
+  pull_request_target:
+    types: opened
+
+jobs:
+  welcome-first-time-contributor:
+    runs-on: ubuntu-latest
+    permissions:
+      issues: write
+      pull-requests: write
+    steps:
+      - uses: plbstl/first-contribution@v3
+        with:
+          pr-opened-msg: |
+            ### Hey @{fc-author}! 👋
+
+            Thanks for submitting your first pull request to the Armbian project — we're excited to have you contributing! 🧡  
+            Your effort doesn’t just improve Armbian — it benefits the entire community of users and developers.
+
+            If you'd like to stay informed about project updates or collaborate more closely with the team,  
+            you can optionally share some personal contact preferences at [armbian.com/update-data](https://www.armbian.com/update-data/).  
+            This helps us keep in touch without relying solely on GitHub notifications.
+
+            Also, don’t forget to ⭐ star the repo if you haven’t already — and welcome aboard! 🚀

.github/workflows/rebase.yml

@@ -1,29 +0,0 @@
-name: Automatic Rebase
-#
-# If you comment "/rebase" to the PR this action rebase the PR
-#
-
-
-on:
-  issue_comment:
-    types: [created]
-
-jobs:
-  rebase:
-    permissions:
-      contents: write  # for cirrus-actions/rebase to push code to rebase
-      pull-requests: read  # for cirrus-actions/rebase to get info about PR
-
-    name: Rebase
-    if: github.event.issue.pull_request != '' && contains(github.event.comment.body, '/rebase')
-    runs-on: ubuntu-latest
-    steps:
-      - name: Checkout the latest code
-        uses: actions/checkout@v4
-        with:
-          token: ${{ secrets.GITHUB_TOKEN }}
-          fetch-depth: 0 # otherwise, you will fail to push refs to dest repo
-      - name: Automatic Rebase
-        uses: cirrus-actions/rebase@1.8
-        env:
-          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}

.github/workflows/scorecard.yml

@@ -1,12 +1,14 @@
 name: Scorecards Security Scan
+run-name: Scan scorecards security on ${{ github.event_name }}
+
 on:
   # Only the default branch is supported.
   branch_protection_rule:
   schedule:
     # Weekly on Saturdays.
-    - cron: '30 1 * * 6'
+    - cron: "30 1 * * 6"
   push:
-    branches: [ main ]
+    branches: [main]
 
 # Declare default permissions as read only.
 permissions: read-all
@@ -31,7 +33,7 @@ jobs:
           persist-credentials: false
 
       - name: "Run analysis"
-        uses: ossf/scorecard-action@v2.3.3
+        uses: ossf/scorecard-action@v2.4.2
         with:
           results_file: results.sarif
           results_format: sarif
@@ -42,15 +44,15 @@ jobs:
           repo_token: ${{ secrets.SCORECARD_READ_TOKEN }}
 
           # Publish the results for public repositories to enable scorecard badges. For more details, see
-          # https://github.com/ossf/scorecard-action#publishing-results. 
-          # For private repositories, `publish_results` will automatically be set to `false`, regardless 
+          # https://github.com/ossf/scorecard-action#publishing-results.
+          # For private repositories, `publish_results` will automatically be set to `false`, regardless
           # of the value entered here.
           publish_results: true
 
       # Upload the results as artifacts (optional). Commenting out will disable uploads of run results in SARIF
       # format to the repository Actions tab.
       - name: "Upload artifact"
-        uses: actions/upload-artifact@65462800fd760344b1a7b4382951275a0abb4808 # v4.3.3
+        uses: actions/upload-artifact@ea165f8d65b6e75b540449e92b4886f43607fa02 # v4.6.2
         with:
           name: SARIF file
           path: results.sarif

.github/workflows/update-board-list.yml

@@ -0,0 +1,21 @@
+name: Update Board Lists
+run-name: Update board list at armbian/os
+
+on:
+  push:
+    paths:
+      - "config/boards/*.*"
+    branches: [main]
+
+jobs:
+  update-board-list-dispatch:
+    name: Send dispatch
+    if: ${{ github.repository_owner == 'Armbian' }}
+    runs-on: ubuntu-latest
+    steps:
+      - name: Repository Dispatch
+        uses: peter-evans/repository-dispatch@v3
+        with:
+          token: ${{ secrets.ACCESS_TOKEN }}
+          repository: armbian/os
+          event-type: "Refresh board list"

.github/workflows/update-tools.yml

@@ -0,0 +1,104 @@
+name: Update Tools in Scripts
+run-name: Update Tools in Scripts by @${{ github.actor }}
+#
+# Some of our scripts download tools from a repo. These can't be bumped by dependabot, so this workflow is a self-created dependabot to bump versions of those tools to stay up-to-date.
+# This workflow only creates a PR if the version was actually updated.
+# To add a new tool, it just needs to be added to the matrix below by filling out all the variables.
+#
+
+permissions:
+  contents: write
+  pull-requests: write
+
+on:
+  workflow_dispatch:
+
+  schedule:
+    - cron: "42 3 16 * *" # Run monthly on the 16th day of the month at 03:42 AM (random value as to not overload GitHub)
+
+jobs:
+  update-tool-version:
+    name: Update ${{ matrix.tool.REPO_NAME }} version
+    runs-on: ubuntu-latest
+
+    # Add new tools here, no need to add anything anywhere else.
+    # Only works for tools hosted on GitHub for now.
+    strategy:
+      matrix:
+        tool:
+          # Shellcheck
+          - USER_NAME: "koalaman"               # GitHub user name
+            REPO_NAME: "shellcheck"             # GitHub repo name
+            PROJECT_NAME: "koalaman/shellcheck" # This is always USER_NAME/REPO_NAME (like in the GitHub URL)
+            VAR_FILE: "lib/tools/shellcheck.sh" # Where the version variable of the tool is saved
+            VERSION_VAR: "SHELLCHECK_VERSION"   # Version variable how it appears in the script
+
+          # Shellcheck #2
+          - USER_NAME: "koalaman"
+            REPO_NAME: "shellcheck"
+            PROJECT_NAME: "koalaman/shellcheck"
+            VAR_FILE: "lib/functions/general/shellcheck.sh"
+            VERSION_VAR: "SHELLCHECK_VERSION"
+
+          # Shellfmt
+          - USER_NAME: "mvdan"
+            REPO_NAME: "sh"
+            PROJECT_NAME: "mvdan/sh"
+            VAR_FILE: "lib/tools/shellfmt.sh"
+            VERSION_VAR: "SHELLFMT_VERSION"
+
+          # ORAS
+          - USER_NAME: "oras-project"
+            REPO_NAME: "oras"
+            PROJECT_NAME: "oras-project/oras"
+            VAR_FILE: "lib/functions/general/oci-oras.sh"
+            VERSION_VAR: "ORAS_VERSION"
+
+          # Bat
+          - USER_NAME: "sharkdp"
+            REPO_NAME: "bat"
+            PROJECT_NAME: "sharkdp/bat"
+            VAR_FILE: "lib/functions/general/bat-cat.sh"
+            VERSION_VAR: "BATCAT_VERSION"
+
+    steps:
+      - name: Checkout repository
+        uses: actions/checkout@v4
+
+      - name: Get current ${{ matrix.tool.PROJECT_NAME }} version
+        id: get-version-current
+        run: |
+          version_current=$(grep -Po '(?<=${{ matrix.tool.VERSION_VAR}}=\${${{ matrix.tool.VERSION_VAR}}:-)[0-9.]+(?=})' ${{ matrix.tool.VAR_FILE }})
+          echo "version_current=$version_current" >> $GITHUB_OUTPUT
+
+      - name: Get latest ${{ matrix.tool.PROJECT_NAME }} version
+        id: get-version-latest
+        # Multi-line string for CHANGE_LOG env, see https://docs.github.com/en/actions/using-workflows/workflow-commands-for-github-actions#multiline-strings
+        # Further exmplanation for the CHANGE_LOG env:
+        # The first 'sed' expression replaces "#123" with "username/repo#123" to link to the correct repo (would otherwise auto-link to own repo)
+        # The second 'sed' expression replaces GitHub URLs with "redirect.github.com" to prevent "This was referenced" in the external repo's PRs/issues
+        run: |
+          version_latest=$(curl --silent "https://api.github.com/repos/${{ matrix.tool.PROJECT_NAME }}/releases/latest" | jq -r .tag_name)
+          version_latest=${version_latest#v}                        # Removing the 'v' prefix since the script uses only plain numbers
+          echo "version_latest=$version_latest" >> $GITHUB_OUTPUT                                                                                
+
+      - name: Update ${{ matrix.tool.VERSION_VAR}} in script
+        # @TODO Make sure that the version is actually higher, not lower (the 'latest' tag does not neccessarily mean that the version is higher!)
+        run: |
+          version_latest=${{ steps.get-version-latest.outputs.version_latest }}
+          sed -i "s/${{ matrix.tool.VERSION_VAR}}=\${${{ matrix.tool.VERSION_VAR}}:-[0-9.]*}/${{ matrix.tool.VERSION_VAR}}=\${${{ matrix.tool.VERSION_VAR}}:-$version_latest}/g" ${{ matrix.tool.VAR_FILE }}
+
+      - name: Create Pull Request to update ${{ matrix.tool.VERSION_VAR}} for ${{ matrix.tool.PROJECT_NAME }}
+        uses: peter-evans/create-pull-request@v7
+        with:
+          token: ${{ secrets.GITHUB_TOKEN }}
+          commit-message: "tools: Bump `${{ matrix.tool.VERSION_VAR}}` from ${{ steps.get-version-current.outputs.version_current }} to ${{ steps.get-version-latest.outputs.version_latest }}"
+          branch: update-version-${{ matrix.tool.VAR_FILE }}-${{ matrix.tool.PROJECT_NAME }}-${{ steps.get-version-latest.outputs.version_latest }}
+          delete-branch: true
+          title: "Bump ${{ matrix.tool.PROJECT_NAME}} from ${{ steps.get-version-current.outputs.version_current }} to ${{ steps.get-version-latest.outputs.version_latest }} in `${{ matrix.tool.VAR_FILE}}`"
+          body: |
+            Bump [${{ matrix.tool.PROJECT_NAME}}](https://github.com/${{ matrix.tool.PROJECT_NAME }}) from ${{ steps.get-version-current.outputs.version_current }} to ${{ steps.get-version-latest.outputs.version_latest }} by bumping `${{ matrix.tool.VERSION_VAR}}` in `${{ matrix.tool.VAR_FILE}}`.
+
+            Check <a href="https://github.com/${{ matrix.tool.PROJECT_NAME }}/releases/latest">the upstream release notes</a>.
+            <p><em>Please note that the above link only shows the release notes for the latest release.</em></p>
+          labels: Dependencies, Bash

README.md

@@ -19,14 +19,14 @@
 
 ### Requirements for self hosted
 
-- x86_64 / aarch64 machine
-- at least 2GB of memory and ~35GB of disk space for VM, container or bare metal installation
-- [Armbian / Ubuntu Jammy 22.04.x](https://github.com/armbian/sdk) for native building or any Docker capable Linux for containerised
-- Windows 10/11 with WSL2 subsystem running Ubuntu Jammy 22.04.x
+- x86_64 / aarch64 / riscv64 machine
+- at least 8GB (less for non-[BTF](https://docs.kernel.org/bpf/btf.html) builds) of memory and ~50GB of disk space for VM, container, or bare-metal installation
+- **Armbian / Ubuntu Jammy 22.04.x** for native building or any Docker capable Linux for containerised
+- **Windows 10/11 with WSL2 subsystem** running Armbian / Ubuntu Jammy 22.04.x
 - Superuser rights (configured sudo or root access).
-- Make sure your system is up-to-date! Outdated Docker binaries, for example, can cause trouble.
+- Make sure your system is up-to-date! Outdated Docker binaries, for example, can cause trouble
 
-For stable branch use `--branch=v24.05`
+For stable branch use `--branch=v25.05`
 
 ```bash
 apt-get -y install git
@@ -55,7 +55,7 @@ Build minimal CLI Armbian Jammy for Bananapi M5 with LTS kernel:
 ./compile.sh \
 BOARD=bananapim5 \
 BRANCH=current \
-RELEASE=jammy \
+RELEASE=noble \
 BUILD_MINIMAL=yes \
 BUILD_DESKTOP=no \
 KERNEL_CONFIGURE=no
@@ -69,12 +69,12 @@ on:
   workflow_dispatch:
 jobs:
   build-armbian:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-24.04-arm # use ubuntu-24.04 when building x86 or riscv64
     steps:
       - uses: armbian/build@main
         with:
           armbian_token:     "${{ secrets.GITHUB_TOKEN }}"  # GitHub token
-          armbian_release:   "jammy"                        # userspace
+          armbian_release:   "noble"                        # userspace
           armbian_target:    "build"                        # build=image, kernel=kernel
           armbian_board:     "bananapim5"                   # build target
 ```
@@ -82,9 +82,10 @@ Generated image will be uploaded to your repository release. Note: GitHub upload
 
 ## More information:
 
-- [Building Armbian](https://docs.armbian.com/Developer-Guide_Build-Preparation/) (how to start, how to automate)
-- [Build options](https://docs.armbian.com/Developer-Guide_Build-Options/) (all build options)
+- [Building Armbian](https://docs.armbian.com/Developer-Guide_Build-Preparation/) (how to start)
+- [Build commands](https://docs.armbian.com/Developer-Guide_Build-Commands/) and [switches](https://docs.armbian.com/Developer-Guide_Build-Switches/) (build options)
 - [User configuration](https://docs.armbian.com/Developer-Guide_User-Configurations/) (how to add packages, patches, and override sources config)
+- [System config](https://docs.armbian.com/User-Guide_Armbian-Config/) (menu driven utility to setup OS and HW features)
 
 ## Download prebuilt images releases
 
@@ -183,10 +184,10 @@ Function | Armbian | Yocto | Buildroot |
 |       └── u-boot-family                For entire kernel family
 ├── tools                                Tools for dealing with kernel patches and configs
 └── userpatches                          User: configuration patching area
-    ├── lib.config                       User: framework common config/override file
-    ├── config-default.conf              User: default user config file
+    ├── config-example.conf              User: example user config file
     ├── customize-image.sh               User: script will execute just before closing the image
     ├── atf                              User: ARM trusted firmware
+    ├── extensions                       User: Extend build system with specific functionality
     ├── kernel                           User: Linux kernel per kernel family
     ├── misc                             User: various
     └── u-boot                           User: universal boot loader patches
@@ -220,6 +221,7 @@ Free support:
 
 - [Forums](https://forum.armbian.com) for Participate in Armbian
 - IRC: `#armbian` on Libera.chat / oftc.net
+- Matrix: [https://forum.armbian.com/topic/40413-enter-the-matrix/](https://forum.armbian.com/topic/40413-enter-the-matrix/)
 - Discord: [https://discord.gg/armbian](https://discord.gg/armbian)
 - Follow [@armbian](https://twitter.com/armbian) on 𝕏 (formerly known as Twitter), <a rel="me" href="https://fosstodon.org/@armbian">Mastodon</a> or [LinkedIn](https://www.linkedin.com/company/armbian).
 - Bugs: [issues](https://github.com/armbian/build/issues) / [JIRA](https://armbian.atlassian.net/jira/dashboards/10000)

VERSION

@@ -1 +1 @@
-24.8.0-trunk
+25.08.0-trunk

action.yml

@@ -87,6 +87,10 @@ inputs:
     required: false
     default: "Build with [Armbian tools](https://github.com/armbian/build)"
 
+  armbian_release_tag:
+    description: "Armbian release tag"
+    required: false
+
 runs:
   using: "composite"
 
@@ -122,7 +126,7 @@ runs:
       uses: actions/checkout@v4
       with:
         repository: armbian/build
-        fetch-depth: 0
+        ref: ${{ inputs.armbian_branch }}
         clean: false
         path: build
 
@@ -143,7 +147,9 @@ runs:
         # copy os userpatches and custom
         mkdir -pv build/userpatches
         rsync -av os/userpatches/. build/userpatches/
-        [[ -d custom/userpatches ]] && rsync -av custom/userpatches/. build/userpatches/
+        if [[ -d custom/userpatches ]]; then
+          rsync -av custom/userpatches/. build/userpatches/
+        fi
 
     - shell: bash
       run: |
@@ -163,9 +169,12 @@ runs:
           DESKTOP_ENVIRONMENT_CONFIG_NAME="config_base"
         fi
 
-        # go to build folder and checkout
+        # go to build folder
         cd build
-        git checkout ${{ inputs.armbian_branch }}
+
+        # default build command below doesn't prepare host dependencies
+        sudo ./compile.sh requirements
+        sudo chown -R $USER:$USER .
 
         # execute build command
         ./compile.sh "${{ inputs.armbian_target }}" \
@@ -194,7 +203,7 @@ runs:
 
     - uses: ncipollo/release-action@v1
       with:
-        tag: "${{ env.ARMBIAN_VERSION }}"
+        tag: ${{ inputs.armbian_release_tag != '' && inputs.armbian_release_tag || env.ARMBIAN_VERSION }}
         name: "${{ inputs.armbian_release_tittle }}"
         artifacts: "${{ inputs.armbian_artifacts }}*"
         allowUpdates: true

config/boards/README.md

@@ -74,7 +74,8 @@ If you are unsure about the documentation then invoke `$ grep -r -A5 -B5 "BUILD_
 		- edge: Use edge kernel
 		- [branch]: Use specified [branch] kernel
 		- [none]: Exits with error
-- **KERNEL_TEST_TARGET** ( comma-separated list of kernel releases or branches ): if test targets are different for testings (internal switch)
+- **KERNEL_TEST_TARGET** ( comma-separated list of kernel releases or branches ): if test targets are different for testings. Also applies to build list generation. (internal switch)
+- **KERNEL_UPGRADE_FREEZE** ( comma-separated list of kernels with versions obove which they stop updating, example: KERNEL_UPGRADE_FREEZE="vendor-rk35xx@24.8.1,current-rockchip-rk3588@24.8.2" )
 - **FULL_DESKTOP** ( boolean ): defines whether to install desktop stack of applications such as office, thunderbird, etc..
 	- Values:
 		- yes: install desktop stack

config/boards/aml-a311d-cc.conf

@@ -0,0 +1,13 @@
+# Amlogic A311D 2/4GB RAM eMMC GBE USB3
+BOARD_NAME="Libre Computer Alta"
+BOARDFAMILY="meson-g12b"
+BOARD_MAINTAINER="Tonymac32"
+KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="edge"
+MODULES_BLACKLIST="simpledrm" # SimpleDRM conflicts with Panfrost
+FULL_DESKTOP="yes"
+SERIALCON="ttyAML0"
+BOOT_LOGO="desktop"
+BOOT_FDT_FILE="amlogic/meson-g12b-a311d-libretech-cc.dtb"
+
+enable_extension "grub-with-dtb"

config/boards/aml-c400-plus.conf

@@ -0,0 +1,50 @@
+# Amlogic S912 octa core 3Gb RAM SoC eMMC
+BOARD_NAME="Magicsee C400 Plus"
+BOARDFAMILY="meson-gxl"
+BOARD_MAINTAINER="jomadeto"
+BOOTSIZE="512"
+BOOTFS_TYPE="fat"
+KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
+SERIALCON="ttyAML0"
+FULL_DESKTOP="yes"
+ASOUND_STATE="asound.state.mesongx"
+BOOT_FDT_FILE="amlogic/meson-gxm-c400-plus.dtb"
+BOOT_LOGO="desktop"
+SRC_EXTLINUX="no"
+SRC_CMDLINE='rootflags=data=writeback console=ttyAML0,115200n8 console=tty0'
+
+function post_family_config__uboot_aml-c400-plus() {
+	# This board type relies on the vendor installed u-boot on emmc to boot
+	display_alert "$BOARD" "Configuring ($BOARD) non-u-boot" "info"
+	unset BOOTSOURCE
+	declare -g BOOTCONFIG='none'
+}
+
+function post_family_tweaks_bsp__config_aml-c400-plus_bsp() {
+	: "${destination:?destination is not set}"
+
+	# Important: this board has board-specific bsp-cli files in config/optional/boards/aml-c400-plus/_packages/bsp-cli
+	#            that path is hashed by the bsp-cli hashing function automatically
+	display_alert "${BOARD}" "Adjusting perms of bsp-cli files for ${BOARD} in /root" "info"
+	run_host_command_logged chmod -v 744 "${destination}"/root/install-aml.sh
+	run_host_command_logged chmod -v 644 "${destination}"/root/fstab.template
+
+	display_alert "${BOARD}" "Removing armbian-install" "info"
+	run_host_command_logged rm -v "${destination}"/usr/bin/armbian-install
+
+	display_alert "${BOARD}" "Adding bsp-cli preinst logic" "info"
+	# Inline function! So this function is automatically hashed when this hook is hashed.
+	function aml-c400-plus-bsp-cli-preinst() {
+		#update of the board bsp-cli package fails because the filesystem type is
+		#fat and dpkg tries to create a hard link for the existing files as backup
+		#so rm the files instead in a preinst step
+		[ -f /boot/armbianEnv.txt ] && rm /boot/armbianEnv.txt
+		[ -f /boot/aml_autoscript ] && rm /boot/aml_autoscript
+		[ -f /boot/emmc_autoscript ] && rm /boot/emmc_autoscript
+		return 0 # short-circuits above, avoid errors
+	}
+	preinst_functions+=('aml-c400-plus-bsp-cli-preinst')
+	if false; then aml-c400-plus-bsp-cli-preinst; fi # so shellcheck stops complaining the function is unused. sorry
+
+}

config/boards/aml-s805-mxq.tvb

@@ -0,0 +1,14 @@
+# MXQ TV box based on Amlogic S805 quad core 1GB RAM SoC GBE
+BOARD_NAME="MXQ"
+BOARDFAMILY="meson8b"
+BOARD_MAINTAINER=""
+KERNEL_TARGET="current"
+KERNEL_TEST_TARGET="current"
+BOOTCONFIG="none"
+BOOTSCRIPT="boot-aml-s805-mxq.cmd:boot.cmd"
+# The preinstalled U-BOOT looks for this script
+BOOTSCRIPT_OUTPUT="s805_autoscript"
+BOOTENV_FILE="aml-s805-mxq.txt"
+
+BOOTSIZE="200"
+BOOTFS_TYPE="fat"

config/boards/aml-s905d3-cc.wip

@@ -0,0 +1,12 @@
+# Amlogic s905d3 2/4GB RAM eMMC GBE USB3
+BOARD_NAME="Libre Computer Solitude"
+BOARDFAMILY="meson-sm1"
+BOARD_MAINTAINER="Tonymac32"
+KERNEL_TARGET="current,edge"
+MODULES_BLACKLIST="simpledrm" # SimpleDRM conflicts with Panfrost
+FULL_DESKTOP="yes"
+SERIALCON="ttyAML0"
+BOOT_LOGO="desktop"
+BOOT_FDT_FILE="amlogic/meson-sm1-s905d3-libretech-cc.dtb"
+
+enable_extension "grub-with-dtb"

config/boards/aml-s9xx-box.tvb

@@ -1,50 +1,60 @@
-# Amlogic S9xx based TVBox 
+# Amlogic S9xx based TVBox
 BOARD_NAME="aml-s9xx-box"
 BOARDFAMILY="meson-gxl"
 BOARD_MAINTAINER="SteeManMI"
-BOOTCONFIG="libretech-cc_defconfig"
 BOOTSIZE="512"
 BOOTFS_TYPE="fat"
 KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
 SERIALCON="ttyAML0"
 FULL_DESKTOP="yes"
 ASOUND_STATE="asound.state.mesongx"
+BOOT_FDT_FILE="amlogic/meson-gxl-s905x-p212.dtb"
 BOOT_LOGO="desktop"
 SRC_EXTLINUX="yes"
 SRC_CMDLINE='rootflags=data=writeback console=ttyAML0,115200n8 console=tty0'
 
-function aml-s9xx-box-bsp-cli-preinst() {
-    #update of the board bsp-cli package fails because the filesystem type is
-    #fat and dpkg tries to create a hard link for the existing files as backup
-    #so rm the files instead in a preinst step
-    [ -f /boot/aml_autoscript ] && rm /boot/aml_autoscript
-    [ -f /boot/emmc_autoscript ] && rm /boot/emmc_autoscript
-    [ -f /boot/s905_autoscript ] && rm /boot/s905_autoscript
-    [ -f /boot/u-boot-s905 ] && rm /boot/u-boot-s905
-    [ -f /boot/u-boot-s905x-s912 ] && rm /boot/u-boot-s905x-s912
-    [ -f /boot/u-boot-s905x2-s922 ] && rm /boot/u-boot-s905x2-s922
-    [ -f /boot/u-boot-s905x3 ] && rm /boot/u-boot-s905x3
-    [ -f /boot/extlinux/extlinux.conf.template ] && rm /boot/extlinux/extlinux.conf.template
-    [ -f /boot/build-u-boot/readme.txt ] && rm /boot/build-u-boot/readme.txt
-    [ -f /boot/build-u-boot/u-boot-s905x-s912.patch ] && rm /boot/build-u-boot/u-boot-s905x-s912.patch
-    [ -f /boot/build-u-boot/u-boot-s905x2-s922.patch ] && rm /boot/build-u-boot/u-boot-s905x2-s922.patch
-    [ -f /boot/build-u-boot/u-boot-s905x3.patch ] && rm /boot/build-u-boot/u-boot-s905x3.patch
-
+function post_family_config__uboot_aml-s9xx-box() {
+	# This board type relies on the vendor installed u-boot on emmc to boot
+	display_alert "$BOARD" "Configuring ($BOARD) non-u-boot" "info"
+	unset BOOTSOURCE
+	declare -g BOOTCONFIG='none'
 }
 
 function post_family_tweaks_bsp__config_aml-s9xx-box_bsp() {
+	: "${destination:?destination is not set}"
 
-    display_alert "$BOARD" "Installing bsp files" "info"
+	# Important: this board has board-specific bsp-cli files in config/optional/boards/aml-s9xx-box/_packages/bsp-cli
+	#            that path is hashed by the bsp-cli hashing function automatically
+	display_alert "${BOARD}" "Adjusting perms of bsp-cli files for ${BOARD} in /root" "info"
+	run_host_command_logged chmod -v 744 "${destination}"/root/install-aml.sh
+	run_host_command_logged chmod -v 644 "${destination}"/root/fstab.template
 
-    cp -r "${SRC}"/packages/bsp/aml-s9xx-box/boot "${destination}"
-    install -D -m 744 "${SRC}"/packages/bsp/aml-s9xx-box/root/install-aml.sh "${destination}"/root/install-aml.sh
-    install -m 644 "${SRC}"/packages/bsp/aml-s9xx-box/root/fstab.template "${destination}"/root/fstab.template
+	display_alert "${BOARD}" "Removing armbian-install" "info"
+	run_host_command_logged rm -v "${destination}"/usr/bin/armbian-install
 
-    display_alert "${BOARD}" "Removing armbian-install" "info"
-
-    rm "${destination}"/usr/sbin/armbian-install
-
-    display_alert "${BOARD}" "Adding bsp-cli preinst logic" "info"
-
-    preinst_functions+=('aml-s9xx-box-bsp-cli-preinst')
+	display_alert "${BOARD}" "Adding bsp-cli preinst logic" "info"
+	# Inline function! So this function is automatically hashed when this hook is hashed.
+	function aml-s9xx-box-bsp-cli-preinst() {
+		#update of the board bsp-cli package fails because the filesystem type is
+		#fat and dpkg tries to create a hard link for the existing files as backup
+		#so rm the files instead in a preinst step
+		[ -f /boot/aml_autoscript ] && rm /boot/aml_autoscript
+		[ -f /boot/emmc_autoscript ] && rm /boot/emmc_autoscript
+		[ -f /boot/s905_autoscript ] && rm /boot/s905_autoscript
+		[ -f /boot/u-boot-s905 ] && rm /boot/u-boot-s905
+		[ -f /boot/u-boot-s905x-s912 ] && rm /boot/u-boot-s905x-s912
+		[ -f /boot/u-boot-s905x2-s922 ] && rm /boot/u-boot-s905x2-s922
+		[ -f /boot/u-boot-s905x3 ] && rm /boot/u-boot-s905x3
+		[ -f /boot/u-boot-s905x3-ugoosx3 ] && rm /boot/u-boot-s905x3-ugoosx3
+		[ -f /boot/extlinux/extlinux.conf.template ] && rm /boot/extlinux/extlinux.conf.template
+		[ -f /boot/build-u-boot/readme.txt ] && rm /boot/build-u-boot/readme.txt
+		[ -f /boot/build-u-boot/u-boot-s905x-s912.patch ] && rm /boot/build-u-boot/u-boot-s905x-s912.patch
+		[ -f /boot/build-u-boot/u-boot-s905x2-s922.patch ] && rm /boot/build-u-boot/u-boot-s905x2-s922.patch
+		[ -f /boot/build-u-boot/u-boot-s905x3.patch ] && rm /boot/build-u-boot/u-boot-s905x3.patch
+		[ -f /boot/build-u-boot/u-boot-s905x3-ugoos-x3.patch ] && rm /boot/build-u-boot/u-boot-s905x3-ugoos-x3.patch
+		return 0 # short-circuits above, avoid errors
+	}
+	preinst_functions+=('aml-s9xx-box-bsp-cli-preinst')
+	if false; then aml-s9xx-box-bsp-cli-preinst; fi # so shellcheck stops complaining the function is unused. sorry
 }

config/boards/aml-t95z-plus.tvb

@@ -3,7 +3,9 @@ BOARD_NAME="T95Z Plus"                          #  (a q201 Chinese clone with in
 BOOT_FDT_FILE="amlogic/meson-gxm-t95z-plus.dtb" # From chewitt's patches
 BOARDFAMILY="meson-gxl"                         # s912's are actually meson-gxm, no harm done.
 BOOTCONFIG="meson-gxm-t95z-plus_defconfig"      # patched-in
+BOARD_MAINTAINER=""
 KERNEL_TARGET="edge"
+KERNEL_TEST_TARGET="edge"
 FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"
 

config/boards/armsom-aim7-io.csc

@@ -0,0 +1,21 @@
+# Rockchip RK3588 SoC octa core 8-32GB SoC 2.5GBe eMMC USB3 NvME
+BOARD_NAME="ArmSoM AIM7 IO"
+BOARDFAMILY="rockchip-rk3588"
+BOARD_MAINTAINER=""
+BOOTCONFIG="armsom-aim7-io-rk3588_defconfig"
+KERNEL_TARGET="vendor"
+FULL_DESKTOP="yes"
+BOOT_LOGO="desktop"
+BOOT_FDT_FILE="rockchip/rk3588-armsom-aim7-io.dtb"
+BOOT_SCENARIO="spl-blobs"
+IMAGE_PARTITION_TABLE="gpt"
+
+function post_family_tweaks__armsom-aim7-io_naming_audios() {
+	display_alert "$BOARD" "Renaming audios" "info"
+
+	mkdir -p $SDCARD/etc/udev/rules.d/
+	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmi0-sound", ENV{SOUND_DESCRIPTION}="HDMI0 Audio"' > $SDCARD/etc/udev/rules.d/90-naming-audios.rules
+	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-dp0-sound", ENV{SOUND_DESCRIPTION}="DP0 Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules
+
+	return 0
+}

config/boards/armsom-cm5-io.csc

@@ -0,0 +1,21 @@
+# Rockchip RK3576 SoC octa core 8-64GB SoC GBe eMMC USB3 NvME WIFI
+BOARD_NAME="ArmSoM CM5 IO"
+BOARDFAMILY="rk35xx"
+BOOTCONFIG="armsom-cm5-io-rk3576_defconfig"
+KERNEL_TARGET="vendor"
+FULL_DESKTOP="yes"
+BOOT_LOGO="desktop"
+BOOT_FDT_FILE="rockchip/rk3576-armsom-cm5-io.dtb"
+BOOT_SCENARIO="spl-blobs"
+IMAGE_PARTITION_TABLE="gpt"
+BOARD_MAINTAINER=""
+
+function post_family_tweaks__armsom-cm5-io_naming_audios() {
+	display_alert "$BOARD" "Renaming armsom-cm5 audios" "info"
+
+	mkdir -p $SDCARD/etc/udev/rules.d/
+	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmi0-sound", ENV{SOUND_DESCRIPTION}="HDMI0 Audio"' > $SDCARD/etc/udev/rules.d/90-naming-audios.rules
+	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-es8316-sound", ENV{SOUND_DESCRIPTION}="ES8316 Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules
+
+	return 0
+}

config/boards/armsom-cm5-rpi-cm4-io.csc

@@ -0,0 +1,20 @@
+# Rockchip RK3576 SoC octa core 8-64GB SoC GBe eMMC USB3 NvME WIFI
+BOARD_NAME="ArmSoM CM5 CM4 IO"
+BOARDFAMILY="rk35xx"
+BOOTCONFIG="armsom-cm5-rpi-cm4-io-rk3576_defconfig"
+KERNEL_TARGET="vendor"
+FULL_DESKTOP="yes"
+BOOT_LOGO="desktop"
+BOOT_FDT_FILE="rockchip/rk3576-armsom-cm5-rpi-cm4-io.dtb"
+BOOT_SCENARIO="spl-blobs"
+IMAGE_PARTITION_TABLE="gpt"
+BOARD_MAINTAINER=""
+
+function post_family_tweaks__armsom-cm5-rpi-cm4-io_naming_audios() {
+	display_alert "$BOARD" "Renaming armsom-cm5-rpi-cm4-io audios" "info"
+
+	mkdir -p $SDCARD/etc/udev/rules.d/
+	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmi0-sound", ENV{SOUND_DESCRIPTION}="HDMI0 Audio"' > $SDCARD/etc/udev/rules.d/90-naming-audios.rules
+
+	return 0
+}

config/boards/armsom-sige1.csc

@@ -8,12 +8,4 @@ FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"
 BOOT_FDT_FILE="rockchip/rk3528-armsom-sige1.dtb"
 BOOT_SCENARIO="spl-blobs"
-WIREGUARD="no"
 IMAGE_PARTITION_TABLE="gpt"
-
-# Override family config for this board; let's avoid conditionals in family config.
-function post_family_config__armsom-sige1_use_vendor_uboot() {
-	BOOTSOURCE='https://github.com/rockchip-linux/u-boot.git'
-	BOOTBRANCH='commit:32640b0ada9344f91e7a407576568782907161cd'
-	BOOTPATCHDIR="legacy/board_hinlink-h28k"
-}

config/boards/armsom-sige3.csc

@@ -0,0 +1,11 @@
+# Rockchip RK3568 quad core 1-8GB SoC GBe eMMC USB3
+BOARD_NAME="ArmSom Sige3"
+BOARDFAMILY="rk35xx"
+BOARD_MAINTAINER="amazingfate"
+BOOTCONFIG="armsom-sige3-rk3568_defconfig"
+KERNEL_TARGET="vendor"
+FULL_DESKTOP="yes"
+BOOT_LOGO="desktop"
+BOOT_FDT_FILE="rockchip/rk3568-armsom-sige3.dtb"
+BOOT_SCENARIO="spl-blobs"
+IMAGE_PARTITION_TABLE="gpt"

config/boards/armsom-sige5.csc

@@ -0,0 +1,22 @@
+# Rockchip RK3576 SoC octa core 8-64GB SoC 2*GBe eMMC USB3 NvME WIFI
+BOARD_NAME="ArmSoM Sige5"
+BOARDFAMILY="rk35xx"
+BOOTCONFIG="armsom-sige5-rk3576_defconfig"
+KERNEL_TARGET="vendor"
+FULL_DESKTOP="yes"
+BOOT_LOGO="desktop"
+BOOT_FDT_FILE="rockchip/rk3576-armsom-sige5.dtb"
+BOOT_SCENARIO="spl-blobs"
+IMAGE_PARTITION_TABLE="gpt"
+BOARD_MAINTAINER=""
+
+function post_family_tweaks__armsom-sige7_naming_audios() {
+	display_alert "$BOARD" "Renaming armsom-sige7 audios" "info"
+
+	mkdir -p $SDCARD/etc/udev/rules.d/
+	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmi0-sound", ENV{SOUND_DESCRIPTION}="HDMI0 Audio"' > $SDCARD/etc/udev/rules.d/90-naming-audios.rules
+	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-dp0-sound", ENV{SOUND_DESCRIPTION}="DP0 Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules
+	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-es8316-sound", ENV{SOUND_DESCRIPTION}="ES8316 Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules
+
+	return 0
+}

config/boards/armsom-sige7.csc

@@ -1,10 +1,9 @@
 # Rockchip RK3588 SoC octa core 8-64GB SoC 2*2.5GBe eMMC USB3 NvME WIFI
 BOARD_NAME="ArmSoM Sige7"
 BOARDFAMILY="rockchip-rk3588"
-BOARD_MAINTAINER="Z-Keven"
+BOARD_MAINTAINER=""
 BOOTCONFIG="armsom-sige7-rk3588_defconfig"
-KERNEL_TARGET="legacy,vendor,edge,collabora"
-KERNEL_TEST_TARGET="legacy" # in case different then kernel target
+KERNEL_TARGET="current,edge,vendor"
 FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"
 BOOT_FDT_FILE="rockchip/rk3588-armsom-sige7.dtb"
@@ -12,6 +11,8 @@ BOOT_SCENARIO="spl-blobs"
 BOOT_SUPPORT_SPI="yes"
 BOOT_SPI_RKSPI_LOADER="yes"
 IMAGE_PARTITION_TABLE="gpt"
+
+# @TODO: consider removing those, as the defaults in rockchip64_common have been bumped up
 DDR_BLOB='rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin'
 BL31_BLOB='rk35/rk3588_bl31_v1.38.elf'
 

config/boards/armsom-w3.csc

@@ -3,8 +3,7 @@ BOARD_NAME="ArmSoM W3"
 BOARDFAMILY="rockchip-rk3588"
 BOARD_MAINTAINER=""
 BOOTCONFIG="armsom-w3-rk3588_defconfig"
-KERNEL_TARGET="legacy,vendor"
-KERNEL_TEST_TARGET="legacy" # in case different then kernel target
+KERNEL_TARGET="vendor"
 FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"
 BOOT_FDT_FILE="rockchip/rk3588-armsom-w3.dtb"
@@ -12,6 +11,8 @@ BOOT_SCENARIO="spl-blobs"
 BOOT_SUPPORT_SPI="yes"
 BOOT_SPI_RKSPI_LOADER="yes"
 IMAGE_PARTITION_TABLE="gpt"
+
+# @TODO: consider removing those, as the defaults in rockchip64_common have been bumped up
 DDR_BLOB='rk35/rk3588_ddr_lp4_2112MHz_lp5_2736MHz_v1.11.bin'
 BL31_BLOB='rk35/rk3588_bl31_v1.38.elf'
 
@@ -27,3 +28,12 @@ function post_family_tweaks__armsom-w3_naming_audios() {
 
 	return 0
 }
+
+function post_family_tweaks__armsom-w3_fix_m2_bluetooth() {
+	display_alert "$BOARD" "Fixing armsom-w3 m.2 usb bluetooth" "info"
+
+	mkdir -p $SDCARD/etc/udev/rules.d/
+	echo 'ACTION=="add", SUBSYSTEM=="usb",ATTR{bConfigurationValue}=="", ATTR{bConfigurationValue}="1"' > $SDCARD/etc/udev/rules.d/91-m2-usb-bluetooth.rules
+
+	return 0
+}

config/boards/avaota-a1.conf

@@ -1,24 +0,0 @@
-# Allwinner Cortex-A55 octa core 2/4GB RAM SoC USB3 USB-C 2x GbE LCD
-BOARD_NAME="Avaota A1"
-BOARDFAMILY="sun55iw3-syterkit"
-BOARD_MAINTAINER=""
-KERNEL_TARGET="legacy"
-BOOT_FDT_FILE="allwinner/sun55i-t527-avaota-a1.dtb"
-SRC_EXTLINUX="yes"
-SRC_CMDLINE="earlycon=uart8250,mmio32,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyAS0,115200 loglevel=8 cma=64M init=/sbin/init"
-BOOTFS_TYPE="fat"
-BOOTSIZE="256"
-SERIALCON="ttyAS0"
-declare -g SYTERKIT_BOARD_ID="avaota-a1" # This _only_ used for syterkit-allwinner extension
-
-function post_family_tweaks__avaota-a1() {
-    display_alert "Applying boot blobs"
-	cp -v "$SRC/packages/blobs/sunxi/sun50iw3/bl31.bin" "$SDCARD/boot/bl31.bin"
-	cp -v "$SRC/packages/blobs/sunxi/sun50iw3/scp.bin" "$SDCARD/boot/scp.bin"
-	cp -v "$SRC/packages/blobs/sunxi/sun50iw3/splash.bin" "$SDCARD/boot/splash.bin"
-	
-    display_alert "Applying wifi firmware"
-        pushd "$SDCARD/lib/firmware"
-        ln -s "aic8800/SDIO/aic8800D80" "aic8800d80" # use armbian-firmware
-        popd
-}

config/boards/avaota-a1.csc

@@ -0,0 +1,24 @@
+# Allwinner Cortex-A55 octa core 2/4GB RAM SoC USB3 USB-C 2x GbE LCD
+BOARD_NAME="Avaota A1"
+BOARDFAMILY="sun55iw3-syterkit"
+BOARD_MAINTAINER="chainsx"
+KERNEL_TARGET="legacy"
+BOOT_FDT_FILE="allwinner/sun55i-t527-avaota-a1.dtb"
+SRC_EXTLINUX="yes"
+SRC_CMDLINE="earlycon=uart8250,mmio32,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyAS0,115200 loglevel=8 cma=64M init=/sbin/init"
+BOOTFS_TYPE="fat"
+BOOTSIZE="256"
+SERIALCON="ttyAS0"
+declare -g SYTERKIT_BOARD_ID="avaota-a1" # This _only_ used for syterkit-allwinner extension
+
+function post_family_tweaks__avaota-a1() {
+	display_alert "Applying boot blobs"
+	cp -v "$SRC/packages/blobs/sunxi/sun55iw3/bl31.bin" "$SDCARD/boot/bl31.bin"
+	cp -v "$SRC/packages/blobs/sunxi/sun55iw3/scp.bin" "$SDCARD/boot/scp.bin"
+	cp -v "$SRC/packages/blobs/sunxi/sun55iw3/splash.bin" "$SDCARD/boot/splash.bin"
+
+	display_alert "Applying wifi firmware"
+	pushd "$SDCARD/lib/firmware"
+	ln -s "aic8800/SDIO/aic8800D80" "aic8800d80" # use armbian-firmware
+	popd
+}

config/boards/ayn-odin2.conf

@@ -1,155 +0,0 @@
-# Generate kernel and rootfs image for Qcom ABL Custom booting
-declare -g BOARD_NAME="Ayn Odin2"
-declare -g BOARD_MAINTAINER="FantasyGmm"
-declare -g BOARDFAMILY="qcom-abl"
-declare -g KERNEL_TARGET="sm8550"
-declare -g KERNELPATCHDIR="sm8550-6.7"
-declare -g EXTRAWIFI="no"
-declare -g BOOTCONFIG="none"
-declare -g BOOTFS_TYPE="fat"
-declare -g BOOTSIZE="256"
-declare -g BOOTIMG_CMDLINE_EXTRA="clk_ignore_unused pd_ignore_unused panic=30 audit=0 allow_mismatched_32bit_el0 rw mem_sleep_default=s2idle"
-declare -g IMAGE_PARTITION_TABLE="gpt"
-
-# Use the full firmware, complete linux-firmware plus Armbian's
-declare -g BOARD_FIRMWARE_INSTALL="-full"
-
-declare -g DESKTOP_AUTOLOGIN="yes"
-
-function post_family_config_branch_sm8550__edk2_kernel() {	
-	declare -g KERNELSOURCE='https://github.com/edk2-porting/linux-next'
-	declare -g KERNEL_MAJOR_MINOR="6.7" # Major and minor versions of this kernel.
-	declare -g KERNELBRANCH="branch:integration/ayn-odin2"
-	declare -g LINUXCONFIG="linux-${ARCH}-${BRANCH}" # for this board: linux-arm64-sm8550
-	display_alert "Setting up kernel ${KERNEL_MAJOR_MINOR} for" "${BOARD}" "info"
-}
-
-function ayn-odin2_is_userspace_supported() {
-	[[ "${RELEASE}" == "trixie" || "${RELEASE}" == "sid" || "${RELEASE}" == "mantic" || "${RELEASE}" == "noble" ]] && return 0
-	return 1
-}
-
-function post_family_tweaks__enable_services() {
-	if ! ayn-odin2_is_userspace_supported; then
-		if [[ "${RELEASE}" != "" ]]; then
-			display_alert "Missing userspace for ${BOARD}" "${RELEASE} does not have the userspace necessary to support the ${BOARD}" "warn"
-		fi
-		return 0
-	fi
-
-	if [[ "${RELEASE}" == "noble" ]];then
-		display_alert "Adding Mesa PPA For Ubuntu " "${BOARD}" "info"
-		do_with_retries 3 chroot_sdcard add-apt-repository ppa:oibaf/graphics-drivers --yes --no-update
-	fi
-
-	# We need unudhcpd from armbian repo, so enable it
-	mv "${SDCARD}"/etc/apt/sources.list.d/armbian.list.disabled "${SDCARD}"/etc/apt/sources.list.d/armbian.list
-
-	# Add zink env
-	echo '__GLX_VENDOR_LIBRARY_NAME=mesa' | tee -a "${SDCARD}"/etc/environment
-	echo 'MESA_LOADER_DRIVER_OVERRIDE=zink' | tee -a "${SDCARD}"/etc/environment
-	echo 'GALLIUM_DRIVER=zink' | tee -a "${SDCARD}"/etc/environment
-	# Add Gamepad udev rule
-	echo 'SUBSYSTEM=="input", ATTRS{name}=="Ayn Odin2 Gamepad", MODE="0666", ENV{ID_INPUT_MOUSE}="0", ENV{ID_INPUT_JOYSTICK}="1"'> "${SDCARD}"/etc/udev/rules.d/99-ignore-gamepad.rules
-	# No driver support for suspend
-	chroot_sdcard systemctl mask suspend.target
-	# Add Bt Mac Fixed service
-	install -Dm655 $SRC/packages/bsp/ayn-odin2/bt-fixed-mac.sh "${SDCARD}"/usr/local/bin/
-	install -Dm644 $SRC/packages/bsp/ayn-odin2/bt-fixed-mac.service "${SDCARD}"/usr/lib/systemd/system/
-	chroot_sdcard systemctl enable bt-fixed-mac
-
-	do_with_retries 3 chroot_sdcard_apt_get_update
-	display_alert "$BOARD" "Installing board tweaks" "info"
-	do_with_retries 3 chroot_sdcard_apt_get_install alsa-ucm-conf unudhcpd mkbootimg git
-
-	# Disable armbian repo back
-	mv "${SDCARD}"/etc/apt/sources.list.d/armbian.list "${SDCARD}"/etc/apt/sources.list.d/armbian.list.disabled
-	do_with_retries 3 chroot_sdcard_apt_get_update
-
-	do_with_retries 3 chroot_sdcard_apt_get_install mesa-vulkan-drivers qbootctl qrtr-tools protection-domain-mapper tqftpserv
-
-	# Kernel postinst script to update abl boot partition
-	install -Dm655 $SRC/packages/bsp/ayn-odin2/zz-update-abl-kernel "${SDCARD}"/etc/kernel/postinst.d/
-
-	cp $SRC/packages/bsp/ayn-odin2/LinuxLoader.cfg "${SDCARD}"/boot/
-
-	return 0
-}
-
-function post_family_tweaks__preset_configs() {
-	display_alert "$BOARD" "preset configs for rootfs" "info"
-	# Set PRESET_NET_CHANGE_DEFAULTS to 1 to apply any network related settings below
-	echo "PRESET_NET_CHANGE_DEFAULTS=1" > "${SDCARD}"/root/.not_logged_in_yet
-
-	# Enable WiFi or Ethernet.
-	#      NB: If both are enabled, WiFi will take priority and Ethernet will be disabled.
-	echo "PRESET_NET_ETHERNET_ENABLED=0" >> "${SDCARD}"/root/.not_logged_in_yet
-	echo "PRESET_NET_WIFI_ENABLED=1" >> "${SDCARD}"/root/.not_logged_in_yet
-
-	# Preset user default shell, you can choose bash or zsh
-	echo "PRESET_USER_SHELL=zsh" >> "${SDCARD}"/root/.not_logged_in_yet
-
-	# Set PRESET_CONNECT_WIRELESS=y if you want to connect wifi manually at first login
-	echo "PRESET_CONNECT_WIRELESS=n" >> "${SDCARD}"/root/.not_logged_in_yet
-
-	# Set SET_LANG_BASED_ON_LOCATION=n if you want to choose "Set user language based on your location?" with "n" at first login
-	echo "SET_LANG_BASED_ON_LOCATION=y" >> "${SDCARD}"/root/.not_logged_in_yet
-
-	# Preset default locale
-	echo "PRESET_LOCALE=en_US.UTF-8" >> "${SDCARD}"/root/.not_logged_in_yet
-
-	# Preset timezone
-	echo "PRESET_TIMEZONE=Etc/UTC" >> "${SDCARD}"/root/.not_logged_in_yet
-
-	# Preset root password
-	echo "PRESET_ROOT_PASSWORD=admin" >> "${SDCARD}"/root/.not_logged_in_yet
-
-	# Preset username
-	echo "PRESET_USER_NAME=odin" >> "${SDCARD}"/root/.not_logged_in_yet
-
-	# Preset user password
-	echo "PRESET_USER_PASSWORD=admin" >> "${SDCARD}"/root/.not_logged_in_yet
-
-	# Preset user default realname
-	echo "PRESET_DEFAULT_REALNAME=Odin" >> "${SDCARD}"/root/.not_logged_in_yet
-}
-
-function post_family_tweaks_bsp__firmware_in_initrd() {
-	random_mac=$(openssl rand -hex 6 | sed 's/\(..\)/\1:/g; s/.$//')
-	declare -g BOOTIMG_CMDLINE_EXTRA="${BOOTIMG_CMDLINE_EXTRA} bt_mac=${random_mac}"
-	display_alert "Generate a random Bluetooth MAC address, Mac:${random_mac}" "info"
-	display_alert "Adding to bsp-cli" "${BOARD}: firmware in initrd" "info"
-	declare file_added_to_bsp_destination # Will be filled in by add_file_from_stdin_to_bsp_destination
-	# Using odin2's firmware for now
-	add_file_from_stdin_to_bsp_destination "/etc/initramfs-tools/hooks/ayn-odin2-firmware" <<- 'FIRMWARE_HOOK'
-		#!/bin/bash
-		[[ "$1" == "prereqs" ]] && exit 0
-		. /usr/share/initramfs-tools/hook-functions
-		for f in /lib/firmware/qcom/sm8550/ayn/odin2/* ; do
-			add_firmware "${f#/lib/firmware/}"
-		done
-		add_firmware "qcom/a740_sqe.fw" # Extra one for dpu
-		add_firmware "qcom/gmu_gen70200.bin" # Extra one for gpu
-		# Extra one for wifi
-		for f in /lib/firmware/ath12k/WCN7850/hw2.0/* ; do
-			add_firmware "${f#/lib/firmware/}"
-		done
-		# Extra one for bt
-		for f in /lib/firmware/qca/* ; do
-			add_firmware "${f#/lib/firmware/}"
-		done	
-	FIRMWARE_HOOK
-	run_host_command_logged chmod -v +x "${file_added_to_bsp_destination}"
-}
-
-function pre_umount_final_image__update_ABL_settings() {
-	if [ -z "$BOOTFS_TYPE" ]; then
-		return 0
-	fi
-	display_alert "Update ABL settings for " "${BOARD}" "info"
-	uuid_line=$(head -n 1 "${SDCARD}"/etc/fstab)
-	rootfs_image_uuid=$(echo "${uuid_line}" | awk '{print $1}' | awk -F '=' '{print $2}')
-	initrd_name=$(find "${SDCARD}/boot/" -type f -name "config-*" | sed 's/.*config-//')
-	sed -i "s/UUID_PLACEHOLDER/${rootfs_image_uuid}/g" "${MOUNT}"/boot/LinuxLoader.cfg
-	sed -i "s/INITRD_PLACEHOLDER/${initrd_name}/g" "${MOUNT}"/boot/LinuxLoader.cfg
-}

config/boards/ayn-odin2.csc

@@ -0,0 +1,130 @@
+# Ayn Odin2 Configuration
+declare -g BOARD_NAME="Ayn Odin2"
+declare -g BOARD_MAINTAINER="FantasyGmm"
+declare -g BOARDFAMILY="sm8550"
+declare -g KERNEL_TARGET="current,edge"
+declare -g KERNEL_TEST_TARGET="edge"
+declare -g EXTRAWIFI="no"
+declare -g BOOTCONFIG="none"
+declare -g BOOTFS_TYPE="fat"
+declare -g BOOTSIZE="256"
+declare -g IMAGE_PARTITION_TABLE="gpt"
+declare -g BOOTIMG_CMDLINE_EXTRA="clk_ignore_unused pd_ignore_unused rw quiet rootwait"
+
+# Use the full firmware, complete linux-firmware plus Armbian's
+declare -g BOARD_FIRMWARE_INSTALL="-full"
+declare -g DESKTOP_AUTOLOGIN="yes"
+
+function ayn-odin2_is_userspace_supported() {
+	[[ "${RELEASE}" == "jammy" ]] && return 0
+	[[ "${RELEASE}" == "trixie" ]] && return 0
+	[[ "${RELEASE}" == "noble" ]] && return 0
+	return 1
+}
+
+function pre_customize_image__ayn-odin2_alsa_ucm_conf() {
+	if ! ayn-odin2_is_userspace_supported; then
+		return 0
+	fi
+
+	display_alert "Add alsa-ucm-conf for ${BOARD}" "${RELEASE}" "warn"
+	(
+		cd "${SDCARD}/usr/share/alsa" || exit 6
+		curl -L -o temp.zip "https://github.com/AYNTechnologies/alsa-ucm-conf/archive/refs/heads/ayn/v1.2.13.zip"
+		unzip -o temp.zip
+		unzip_dir=$(unzip -Z1 temp.zip | head -n1 | cut -d/ -f1)
+		cp -rf "${unzip_dir}/"* .
+		rm -rf "$unzip_dir" temp.zip
+	)
+}
+
+function post_family_tweaks_bsp__ayn-odin2_firmware() {
+	display_alert "Install firmwares for ${BOARD}" "${RELEASE}" "warn"
+
+	# USB Gadget Network service
+	mkdir -p $destination/usr/local/bin/
+	mkdir -p $destination/usr/lib/systemd/system/
+	mkdir -p $destination/etc/initramfs-tools/scripts/init-bottom/
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/setup-usbgadget-network.sh $destination/usr/local/bin/
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/remove-usbgadget-network.sh $destination/usr/local/bin/
+	install -Dm644 $SRC/packages/bsp/usb-gadget-network/usbgadget-rndis.service $destination/usr/lib/systemd/system/
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/usb-gadget-initramfs-hook $destination/etc/initramfs-tools/hooks/usb-gadget
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/usb-gadget-initramfs-premount $destination/etc/initramfs-tools/scripts/init-premount/usb-gadget
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/dropbear $destination/etc/initramfs-tools/scripts/init-premount/
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/kill-dropbear $destination/etc/initramfs-tools/scripts/init-bottom/
+
+	return 0
+}
+
+function post_family_tweaks__ayn-odin2_enable_services() {
+	if ! ayn-odin2_is_userspace_supported; then
+		if [[ "${RELEASE}" != "" ]]; then
+			display_alert "Missing userspace for ${BOARD}" "${RELEASE} does not have the userspace necessary to support the ${BOARD}" "warn"
+		fi
+		return 0
+	fi
+
+	if [[ "${RELEASE}" == "jammy" ]] || [[ "${RELEASE}" == "noble" ]]; then
+		display_alert "Adding Mesa PPA For Ubuntu ${BOARD}" "warn"
+		do_with_retries 3 chroot_sdcard add-apt-repository ppa:liujianfeng1994/qcom-mainline --yes --no-update
+	fi
+
+	# We need unudhcpd from armbian repo, so enable it
+	mv "${SDCARD}"/etc/apt/sources.list.d/armbian.sources.disabled "${SDCARD}"/etc/apt/sources.list.d/armbian.sources
+
+	do_with_retries 3 chroot_sdcard_apt_get_update
+		display_alert "Installing ${BOARD} tweaks" "warn"
+	do_with_retries 3 chroot_sdcard_apt_get_install alsa-ucm-conf qbootctl qrtr-tools unudhcpd mkbootimg
+	# disable armbian repo back
+	mv "${SDCARD}"/etc/apt/sources.list.d/armbian.sources "${SDCARD}"/etc/apt/sources.list.d/armbian.sources.disabled
+	do_with_retries 3 chroot_sdcard_apt_get_update
+	chroot_sdcard systemctl enable qbootctl.service
+
+	# Add Gamepad udev rule
+	echo 'SUBSYSTEM=="input", ATTRS{name}=="AYN Odin2 Gamepad", MODE="0666", ENV{ID_INPUT_JOYSTICK}="1"' > "${SDCARD}"/etc/udev/rules.d/99-ignore-gamepad.rules
+	# Not Any driver support suspend mode
+	chroot_sdcard systemctl mask suspend.target
+
+	chroot_sdcard systemctl enable usbgadget-rndis.service
+	cp $SRC/packages/bsp/ayn-odin2/LinuxLoader.cfg "${SDCARD}"/boot/
+
+	return 0
+}
+
+function post_family_tweaks_bsp__ayn-odin2_bsp_firmware_in_initrd() {
+	display_alert "Adding to bsp-cli" "${BOARD}: firmware in initrd" "warn"
+	declare file_added_to_bsp_destination # Will be filled in by add_file_from_stdin_to_bsp_destination
+	# Using odin2's firmware for now
+	add_file_from_stdin_to_bsp_destination "/etc/initramfs-tools/hooks/ayn-odin2-firmware" <<- 'FIRMWARE_HOOK'
+		#!/bin/bash
+		[[ "$1" == "prereqs" ]] && exit 0
+		. /usr/share/initramfs-tools/hook-functions
+		for f in /lib/firmware/qcom/sm8550/ayn/odin2portal/* ; do
+			add_firmware "${f#/lib/firmware/}"
+		done
+		add_firmware "qcom/a740_sqe.fw" # Extra one for dpu
+		add_firmware "qcom/gmu_gen70200.bin" # Extra one for gpu
+		add_firmware "qcom/vpu/vpu30_p4.mbn" # Extra one for vpu
+		# Extra one for wifi
+		for f in /lib/firmware/ath12k/WCN7850/hw2.0/* ; do
+			add_firmware "${f#/lib/firmware/}"
+		done
+		# Extra one for bt
+		for f in /lib/firmware/qca/* ; do
+			add_firmware "${f#/lib/firmware/}"
+		done
+	FIRMWARE_HOOK
+	run_host_command_logged chmod -v +x "${file_added_to_bsp_destination}"
+}
+
+function pre_umount_final_image__update_ABL_settings() {
+	if [ -z "$BOOTFS_TYPE" ]; then
+		return 0
+	fi
+	display_alert "Update ABL settings for " "${BOARD}" "info"
+	uuid_line=$(head -n 1 "${SDCARD}"/etc/fstab)
+	rootfs_image_uuid=$(echo "${uuid_line}" | awk '{print $1}' | awk -F '=' '{print $2}')
+	initrd_name=$(find "${SDCARD}/boot/" -type f -name "config-*" | sed 's/.*config-//')
+	sed -i "s/UUID_PLACEHOLDER/${rootfs_image_uuid}/g" "${MOUNT}"/boot/LinuxLoader.cfg
+	sed -i "s/INITRD_PLACEHOLDER/${initrd_name}/g" "${MOUNT}"/boot/LinuxLoader.cfg
+}

config/boards/bananapi.conf

@@ -0,0 +1,15 @@
+# Allwinner A20 dual core 1Gb RAM SoC 1xSATA GBE
+BOARD_NAME="Banana Pi"
+BOARDFAMILY="sun7i"
+BOARD_MAINTAINER="DylanHP janprunk"
+BOOTCONFIG="Bananapi_defconfig"
+KERNEL_TARGET="legacy,current,edge"
+KERNEL_TEST_TARGET="current"
+
+function post_config_uboot_target__extra_configs_for_bananapi() {
+	display_alert "$BOARD" "set dram clock" "info"
+	run_host_command_logged scripts/config --set-val CONFIG_DRAM_CLK "384"
+
+	display_alert "$BOARD" "disable de2 to improve edid detection" "info"
+	run_host_command_logged scripts/config --disable CONFIG_VIDEO_DE2
+}

config/boards/bananapi.csc

@@ -1,14 +0,0 @@
-# Allwinner A20 dual core 1Gb RAM SoC 1xSATA GBE
-BOARD_NAME="Banana Pi"
-BOARDFAMILY="sun7i"
-BOARD_MAINTAINER="DylanHP"
-BOOTCONFIG="Bananapi_defconfig"
-KERNEL_TARGET="legacy,current,edge"
-
-function post_config_uboot_target__extra_configs_for_bananapi() {
-	display_alert "$BOARD" "set dram clock" "info"
-	run_host_command_logged scripts/config --set-val CONFIG_DRAM_CLK "384"
-
-	display_alert "$BOARD" "disable de2 to improve edid detection" "info"
-	run_host_command_logged scripts/config --disable CONFIG_VIDEO_DE2
-}

config/boards/bananapicm4io.conf

@@ -4,14 +4,14 @@ BOARDFAMILY="meson-g12b"
 BOARD_MAINTAINER="pyavitz"
 BOOTCONFIG="bananapi-cm4-cm4io_defconfig"
 KERNEL_TARGET="current,edge"
-KERNEL_TEST_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
 MODULES_BLACKLIST="simpledrm" # SimpleDRM conflicts with Panfrost
 FULL_DESKTOP="yes"
 SERIALCON="ttyAML0"
 BOOT_LOGO="desktop"
 BOOT_FDT_FILE="amlogic/meson-g12b-bananapi-cm4-cm4io.dtb"
-BOOTBRANCH_BOARD="tag:v2024.01"
-BOOTPATCHDIR="v2024.01"
+BOOTBRANCH_BOARD="tag:v2025.01"
+BOOTPATCHDIR="v2025.01"
 
 function post_family_tweaks_bsp__bananapi_rtl_bt() {
 	if [[ -d "$SRC/packages/bsp/bananapi/rtl_bt" ]]; then

config/boards/bananapif3.conf

@@ -0,0 +1,32 @@
+# SpacemiT K1 octa core RISC-V SoC 2GB/4GB RAM 8GB/16GB eMMC 4x USB3 2x GbE
+BOARD_NAME="BananaPi BPI-F3"
+BOARDFAMILY="spacemit"
+BOARD_MAINTAINER="pyavitz"
+KERNEL_TARGET="current"
+BOOT_FDT_FILE="spacemit/k1-bananapi-f3.dtb"
+BOOTDELAY=1
+SRC_EXTLINUX="yes"
+SRC_CMDLINE="earlycon=sbi console=tty1 console=ttyS0,115200"
+PACKAGE_LIST_BOARD="rfkill bluetooth bluez bluez-tools"
+
+function post_config_uboot_target__extra_configs_for_bananapi_f3() {
+	display_alert "u-boot for ${BOARD}" "u-boot: enabling extra configs" "info"
+
+	run_host_command_logged scripts/config --enable CONFIG_SD_BOOT
+	run_host_command_logged scripts/config --enable CONFIG_EXT4_WRITE
+	run_host_command_logged scripts/config --enable CONFIG_FS_BTRFS
+	run_host_command_logged scripts/config --enable CONFIG_CMD_BTRFS
+}
+
+function post_family_tweaks_bsp__bananapi_f3_extras() {
+	if [[ -d "$SRC/packages/blobs/riscv64/spacemit" ]]; then
+		run_host_command_logged mkdir -pv "${destination}"/lib/firmware
+		display_alert "$BOARD" "Installing boot firmware" "info"
+		run_host_command_logged cp -fv $SRC/packages/blobs/riscv64/spacemit/esos.elf "${destination}"/lib/firmware
+	fi
+
+	display_alert "$BOARD" "Force load wireless" "info"
+
+	run_host_command_logged mkdir -pv "${destination}"/etc/modules-load.d
+	run_host_command_logged echo "8852bs" > "${destination}"/etc/modules-load.d/${BOARD}.conf
+}

config/boards/bananapim1plus.csc

@@ -4,3 +4,4 @@ BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="bananapi_m1_plus_defconfig"
 KERNEL_TARGET="legacy,current,edge"
+KERNEL_TEST_TARGET="current"

config/boards/bananapim2.eos

@@ -5,3 +5,4 @@ BOARD_MAINTAINER=""
 BOOTCONFIG="Sinovoip_BPI_M2_defconfig"
 OVERLAY_PREFIX="sun6i-a31s"
 KERNEL_TARGET="legacy,current"
+KERNEL_TEST_TARGET="current"

config/boards/bananapim2plus.conf

@@ -0,0 +1,11 @@
+# Allwinner H3 quad core 1Gb RAM SoC Wifi GBE
+BOARD_NAME="Banana Pi M2+"
+BOARDFAMILY="sun8i"
+BOARD_MAINTAINER="leggewie"
+BOOTCONFIG="bananapi_m2_plus_h3_defconfig"
+DEFAULT_OVERLAYS="analog-codec"
+MODULES_CURRENT="g_serial"
+MODULES_LEGACY="g_serial"
+SERIALCON="ttyS0,ttyGS0"
+KERNEL_TARGET="legacy,current,edge"
+KERNEL_TEST_TARGET="current"

config/boards/bananapim2plus.csc

@@ -1,10 +0,0 @@
-# Allwinner H3 quad core 1Gb RAM SoC Wifi GBE
-BOARD_NAME="Banana Pi M2+"
-BOARDFAMILY="sun8i"
-BOARD_MAINTAINER=""
-BOOTCONFIG="bananapi_m2_plus_h3_defconfig"
-DEFAULT_OVERLAYS="analog-codec"
-MODULES_CURRENT="g_serial"
-MODULES_LEGACY="g_serial"
-SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="legacy,current,edge"

config/boards/bananapim2pro.conf

@@ -1,19 +1,20 @@
 # Amlogic S905X3 quad core 2-4GB RAM SoC eMMC GBE USB3 SPI Wifi
 BOARD_NAME="Banana Pi M2Pro"
 BOARDFAMILY="meson-sm1"
-BOARD_MAINTAINER="bretmlw"
+BOARD_MAINTAINER="igorpecovnik"
 BOOTCONFIG="bananapi-m2-pro_defconfig"
 BOOT_FDT_FILE="amlogic/meson-sm1-bananapi-m2-pro.dtb"
 KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
 MODULES_BLACKLIST="simpledrm" # SimpleDRM conflicts with Panfrost
 FULL_DESKTOP="yes"
 SERIALCON="ttyAML0"
 BOOT_LOGO="desktop"
-BOOTBRANCH_BOARD="tag:v2023.07.02"
-BOOTPATCHDIR="v2023.07.02"
+BOOTBRANCH_BOARD="tag:v2024.07"
+BOOTPATCHDIR="v2024.07"
 
 function fetch_sources_tools__libreelec_amlogic_fip_pre_m2-pro_blob_update() {
-        fetch_from_repo "https://github.com/Dangku/amlogic-boot-fip" "amlogic-boot-fip" "branch:master"
+	fetch_from_repo "https://github.com/Dangku/amlogic-boot-fip" "amlogic-boot-fip" "branch:master"
 }
 
 function post_uboot_custom_postprocess__bpi-m2-pro() {

config/boards/bananapim2s.conf

@@ -1,16 +1,17 @@
 # Amlogic A311D 4GB RAM eMMC 2xGBE USB3
 BOARD_NAME="Banana Pi M2S"
 BOARDFAMILY="meson-g12b"
-BOARD_MAINTAINER="pyavitz jeanrhum"
+BOARD_MAINTAINER="jeanrhum pyavitz"
 BOOTCONFIG="bananapi-m2s_defconfig"
 KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
 MODULES_BLACKLIST="simpledrm" # SimpleDRM conflicts with Panfrost
 FULL_DESKTOP="yes"
 SERIALCON="ttyAML0"
 BOOT_LOGO="desktop"
 BOOT_FDT_FILE="amlogic/meson-g12b-a311d-bananapi-m2s.dtb"
-BOOTBRANCH_BOARD="tag:v2024.01"
-BOOTPATCHDIR="v2024.01"
+BOOTBRANCH_BOARD="tag:v2025.01"
+BOOTPATCHDIR="v2025.01"
 
 function post_family_tweaks_bsp__bananapi_rtl_bt() {
 	if [[ -d "$SRC/packages/bsp/bananapi/rtl_bt" ]]; then

config/boards/bananapim2zero.csc

@@ -1,9 +1,10 @@
 # Allwinner H2+ quad core 512MB SoC Wi-Fi/BT
 BOARD_NAME="Banana Pi M2 Zero"
 BOARDFAMILY="sun8i"
-BOARD_MAINTAINER=""
+BOARD_MAINTAINER="mhawkins-consultant"
 BOOTCONFIG="bananapi_m2_zero_defconfig"
 MODULES_LEGACY="g_serial"
 MODULES_CURRENT="g_serial"
 SERIALCON="ttyS0,ttyGS0"
 KERNEL_TARGET="legacy,current,edge"
+KERNEL_TEST_TARGET="current"

config/boards/bananapim3.csc

@@ -5,3 +5,7 @@ BOARD_MAINTAINER="AaronNGray"
 BOOTCONFIG="Sinovoip_BPI_M3_defconfig"
 OVERLAY_PREFIX="sun8i-a83t"
 KERNEL_TARGET="legacy,current,edge"
+KERNEL_TEST_TARGET="current"
+
+BOOTBRANCH="tag:v2024.01"
+BOOTPATCHDIR="u-boot-sunxi/board_${BOARD}"

config/boards/bananapim4berry.conf

@@ -0,0 +1,26 @@
+# Allwinner H618 quad core 2/4GB RAM 8GB eMMC SoC WiFi\Bt HDMI SPI USB-C
+BOARD_NAME="BananaPi M4 Berry"
+BOARDFAMILY="sun50iw9-bpi"
+BOARD_MAINTAINER="The-going"
+BOOTCONFIG="bananapi_m4_berry_defconfig"
+
+BOOTPATCHDIR="v2025-sunxi"
+BOOTBRANCH_BOARD="tag:v2025.04"
+
+OVERLAY_PREFIX="sun50i-h616"
+BOOT_FDT_FILE="sun50i-h618-bananapi-m4-berry.dtb"
+BOOT_LOGO="desktop"
+KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
+
+PACKAGE_LIST_BOARD="rfkill bluetooth bluez bluez-tools hostapd"
+
+function post_family_tweaks_bsp__bananapi_module_conf() {
+
+	mkdir -p "${destination}"/etc/modprobe.d/
+	display_alert "$BOARD" "Configuring rtl8821cu wifi module" "info"
+
+	cp -f "${SRC}"/packages/bsp/wifi-rtl8821cu/etc/modprobe.d/8821cu.conf \
+			"${destination}"/etc/modprobe.d/8821cu.conf
+
+}

config/boards/bananapim4zero.conf

@@ -1,20 +1,25 @@
 # Allwinner H618 quad core 1/2/4GB RAM SoC WiFi SPI USB-C
-BOARD_NAME="Banana Pi M4Zero"
+BOARD_NAME="BananaPi BPI-M4-Zero"
 BOARDFAMILY="sun50iw9-bpi"
 BOARD_MAINTAINER="pyavitz"
 BOOTCONFIG="bananapi_m4zero_defconfig"
 OVERLAY_PREFIX="sun50i-h616"
+BOOT_FDT_FILE="sun50i-h618-bananapi-m4-zero.dtb"
 BOOT_LOGO="desktop"
 KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
 MODULES_BLACKLIST="rtw88_8821c rtw88_8821cu"
 FORCE_BOOTSCRIPT_UPDATE="yes"
-BOOTBRANCH_BOARD="tag:v2024.01"
-BOOTPATCHDIR="v2024.01"
+BOOTBRANCH_BOARD="tag:v2024.04"
+BOOTPATCHDIR="v2024.04"
+PACKAGE_LIST_BOARD="rfkill bluetooth bluez bluez-tools"
 
-function post_family_tweaks_bsp__bananapi_rtl_bt() {
-	if [[ -d "$SRC/packages/bsp/bananapi/rtl_bt" ]]; then
+function post_family_tweaks_bsp__bananapi_firmware() {
+	if [[ -d "$SRC/packages/bsp/bananapi/brcm" ]] && [[ -d "$SRC/packages/bsp/bananapi/rtl_bt" ]]; then
+		mkdir -p "${destination}"/lib/firmware/updates/brcm
 		mkdir -p "${destination}"/lib/firmware/updates/rtl_bt
 		display_alert "$BOARD" "Installing upstream firmware" "info"
+		cp -fr $SRC/packages/bsp/bananapi/brcm/* "${destination}"/lib/firmware/updates/brcm/
 		cp -fr $SRC/packages/bsp/bananapi/rtl_bt/* "${destination}"/lib/firmware/updates/rtl_bt/
 	fi
 }

config/boards/bananapim5.conf

@@ -1,16 +1,17 @@
 # Amlogic S905X3 quad core 2-4GB RAM SoC eMMC GBE USB3 SPI
 BOARD_NAME="Banana Pi M5"
 BOARDFAMILY="meson-sm1"
-BOARD_MAINTAINER="bretmlw"
+BOARD_MAINTAINER="igorpecovnik"
 BOOTCONFIG="bananapi-m5_defconfig"
 BOOT_FDT_FILE="amlogic/meson-sm1-bananapi-m5.dtb"
 KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
 MODULES_BLACKLIST="simpledrm" # SimpleDRM conflicts with Panfrost
 FULL_DESKTOP="yes"
 SERIALCON="ttyAML0"
 BOOT_LOGO="desktop"
-BOOTBRANCH_BOARD="tag:v2023.07.02"
-BOOTPATCHDIR="v2023.07.02"
+BOOTBRANCH_BOARD="tag:v2024.07"
+BOOTPATCHDIR="v2024.07"
 
 function fetch_sources_tools__libreelec_amlogic_fip_pre_m5_blob_update() {
 	fetch_from_repo "https://github.com/Dangku/amlogic-boot-fip" "amlogic-boot-fip" "branch:master"

config/boards/bananapim64.csc

@@ -5,4 +5,5 @@ BOARD_MAINTAINER="devdotnetorg"
 BOOTCONFIG_DEFAULT="sun50iw1p1_config"
 BOOTCONFIG="bananapi_m64_defconfig"
 KERNEL_TARGET="legacy,current,edge"
+KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="a64_defconfig"

config/boards/bananapim7.conf

@@ -1,8 +1,9 @@
+# Rockchip RK3588 octa core 8-32GB RAM SoC 2*2.5GBe eMMC USB3 NvME WIFI
 source "${SRC}/config/boards/armsom-sige7.csc"
 BOARD_NAME="Banana Pi M7"
 BOARD_MAINTAINER="amazingfate"
 BOOT_FDT_FILE="rockchip/rk3588-bananapi-m7.dtb"
 # Those are included in armsom-sige7.csc, but this file is parsed directly by the JSON matrix generator and thus those need to be in here
-BOARD_MAINTAINER="Z-Keven"
-KERNEL_TARGET="legacy,vendor,edge,collabora"
+KERNEL_TARGET="current,edge,vendor"
+KERNEL_TEST_TARGET="vendor,current"
 BOARDFAMILY="rockchip-rk3588"

config/boards/bananapipro.csc

@@ -4,7 +4,7 @@ BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Bananapro_defconfig"
 KERNEL_TARGET="legacy,current,edge"
-KERNEL_TEST_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
 
 function post_config_uboot_target__extra_configs_for_bananapipro() {
 	display_alert "$BOARD" "set dram clock" "info"

config/boards/bananapir2.csc

@@ -2,6 +2,8 @@
 BOARD_NAME="Banana Pi R2"
 BOARDFAMILY="mt7623"
 BOARD_MAINTAINER=""
+KERNEL_TARGET="current"
+KERNEL_TEST_TARGET="current"
 BOOTCONFIG="mt7623n_bpir2_defconfig"
-HAS_VIDEO_OUTPUT="no"
-KERNEL_TARGET="legacy"
+BOOT_FDT_FILE="mediatek/mt7623n-bananapi-bpi-r2"
+HAS_VIDEO_OUTPUT="yes"

config/boards/bananapir2pro.csc

@@ -4,6 +4,7 @@ BOARDFAMILY="rockchip64"
 BOARD_MAINTAINER=""
 BOOTCONFIG="bpi-r2-pro-rk3568_defconfig"
 KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"
 BOOT_FDT_FILE="rockchip/rk3568-bpi-r2-pro.dtb"

config/boards/beaglebone-ai64.conf

@@ -0,0 +1,20 @@
+# BeagleBone® AI-64 dual core 4GB GBE USB3 OSPI DisplayPort HDMI
+
+BOARD_NAME="BeagleBone AI-64"
+BOARDFAMILY="k3"
+BOARD_MAINTAINER="Grippy98"
+BOOTCONFIG="j721e_beagleboneai64_a72_defconfig"
+BOOTFS_TYPE="fat"
+BOOT_FDT_FILE="ti/k3-j721e-beagleboneai64.dts"
+TIBOOT3_BOOTCONFIG="j721e_beagleboneai64_r5_defconfig"
+TIBOOT3_FILE="tiboot3-j721e-gp-evm.bin"
+SYSFW_FILE="sysfw-j721e-gp-evm.itb"
+TISPL_FILE="tispl.bin_unsigned"
+UBOOT_FILE="u-boot.img_unsigned"
+DEFAULT_CONSOLE="serial"
+KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
+SERIALCON="ttyS2"
+ATF_BOARD="generic"
+OPTEE_ARGS=""
+OPTEE_PLATFORM="k3-j721e"

config/boards/beagleplay.conf

@@ -0,0 +1,19 @@
+# TI AM62 quad core 2GB DDR4 16GB eMMC 1xGBE 1xSPE HDMI
+
+BOARD_NAME="BeaglePlay"
+BOARDFAMILY="k3"
+BOARD_MAINTAINER="Grippy98"
+BOOTCONFIG="am62x_beagleplay_a53_defconfig"
+BOOTFS_TYPE="fat"
+BOOT_FDT_FILE="ti/k3-am625-beagleplay.dts"
+TIBOOT3_BOOTCONFIG="am62x_beagleplay_r5_defconfig"
+TIBOOT3_FILE="tiboot3-am62x-gp-evm.bin"
+TISPL_FILE="tispl.bin_unsigned"
+UBOOT_FILE="u-boot.img_unsigned"
+DEFAULT_CONSOLE="serial"
+KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
+SERIALCON="ttyS2"
+ATF_BOARD="lite"
+OPTEE_ARGS="CFG_TEE_CORE_LOG_LEVEL=1"
+OPTEE_PLATFORM="k3-am62x"

config/boards/beaglev.csc

@@ -1,48 +0,0 @@
-# RISC-V StarFive BeagleV
-BOARD_NAME="BeagleV"
-BOARDFAMILY="starfive"
-BOARD_MAINTAINER=""
-KERNEL_TARGET="edge"
-BOOT_FDT_FILE="starfive/jh7100-beaglev-starlight-a1.dtb"
-SRC_EXTLINUX="yes"
-SRC_CMDLINE="console=ttyS0,115200n8 console=tty0 earlycon=sbi rootflags=data=writeback stmmaceth=chain_mode:1 rw"
-BOOTCONFIG=none   
-
-function post_family_tweaks__beaglev_uenv() {
-	# rpardini: uEnv.txt is needed to re-enable distroboot-like behaviour on the board's SPI u-boot
-	display_alert "$BOARD" "creating uEnv.txt" "info"
-	cat <<- UENV_SCRIPT_HEADER > "${SDCARD}/boot/uEnv.txt"
-		fdt_high=0xffffffffffffffff
-		initrd_high=0xffffffffffffffff
-
-		scriptaddr=0x88100000
-		script_offset_f=0x1fff000
-		script_size_f=0x1000
-
-		kernel_addr_r=0x84000000
-		kernel_comp_addr_r=0x90000000
-		kernel_comp_size=0x10000000
-
-		fdt_addr_r=0x88000000
-		ramdisk_addr_r=0x88300000
-
-		distro_bootpart=1
-		uenvcmd=run mmc_boot
-	UENV_SCRIPT_HEADER
-
-	display_alert "$BOARD" "creating 10-hdmi.conf" "info"
-	mkdir -p "${SDCARD}/etc/X11/xorg.conf.d"
-	cat <<- XORG_HDMI_CONF > "${SDCARD}/etc/X11/xorg.conf.d/10-hdmi.conf"
-		Section "Device"
-		    Identifier  "Default Device"
-		    Driver      "modesetting"
-		    Option      "AccelMethod"    "none"     ### "glamor" to enable 3D acceleration, "none" to disable.
-		EndSection
-		Section "ServerFlags"
-		        Option  "AutoAddGPU" "off"
-		        Option "Debug" "dmabuf_capable"
-		EndSection
-	XORG_HDMI_CONF
-
-	return 0
-}

config/boards/beaglev.eos

@@ -0,0 +1,48 @@
+# RISC-V StarFive BeagleV
+BOARD_NAME="BeagleV"
+BOARDFAMILY="starfive"
+BOARD_MAINTAINER=""
+KERNEL_TARGET="edge"
+BOOT_FDT_FILE="starfive/jh7100-beaglev-starlight-a1.dtb"
+SRC_EXTLINUX="yes"
+SRC_CMDLINE="console=ttyS0,115200n8 console=tty0 earlycon=sbi rootflags=data=writeback stmmaceth=chain_mode:1 rw"
+BOOTCONFIG=none
+
+function post_family_tweaks__beaglev_uenv() {
+	# rpardini: uEnv.txt is needed to re-enable distroboot-like behaviour on the board's SPI u-boot
+	display_alert "$BOARD" "creating uEnv.txt" "info"
+	cat <<- UENV_SCRIPT_HEADER > "${SDCARD}/boot/uEnv.txt"
+		fdt_high=0xffffffffffffffff
+		initrd_high=0xffffffffffffffff
+
+		scriptaddr=0x88100000
+		script_offset_f=0x1fff000
+		script_size_f=0x1000
+
+		kernel_addr_r=0x84000000
+		kernel_comp_addr_r=0x90000000
+		kernel_comp_size=0x10000000
+
+		fdt_addr_r=0x88000000
+		ramdisk_addr_r=0x88300000
+
+		distro_bootpart=1
+		uenvcmd=run mmc_boot
+	UENV_SCRIPT_HEADER
+
+	display_alert "$BOARD" "creating 10-hdmi.conf" "info"
+	mkdir -p "${SDCARD}/etc/X11/xorg.conf.d"
+	cat <<- XORG_HDMI_CONF > "${SDCARD}/etc/X11/xorg.conf.d/10-hdmi.conf"
+		Section "Device"
+		    Identifier  "Default Device"
+		    Driver      "modesetting"
+		    Option      "AccelMethod"    "none"     ### "glamor" to enable 3D acceleration, "none" to disable.
+		EndSection
+		Section "ServerFlags"
+		        Option  "AutoAddGPU" "off"
+		        Option "Debug" "dmabuf_capable"
+		EndSection
+	XORG_HDMI_CONF
+
+	return 0
+}

config/boards/beagley-ai.csc

@@ -0,0 +1,32 @@
+#Texas Instruments AM67A quad core 4GB USB3 DDR4 4TOPS
+
+BOARD_NAME="BeagleY-AI"
+BOARDFAMILY="k3"
+BOARD_MAINTAINER="Grippy98"
+BOOTCONFIG="am67a_beagley_ai_a53_defconfig"
+BOOTFS_TYPE="fat"
+BOOT_FDT_FILE="k3-am67a-beagley-ai.dts"
+TIBOOT3_BOOTCONFIG="am67a_beagley_ai_r5_defconfig"
+TIBOOT3_FILE="tiboot3-j722s-hs-fs-evm.bin"
+DEFAULT_CONSOLE="serial"
+KERNEL_TARGET="current"
+KERNEL_TEST_TARGET="current"
+SERIALCON="ttyS2"
+ATF_BOARD="lite"
+OPTEE_ARGS=""
+OPTEE_PLATFORM="k3-am62x"
+
+# Use these branches until BeagleY-AI goes upstream
+function post_family_config_branch_current__beagley_ai_use_beagle_kernel_uboot() {
+	display_alert "$BOARD" " Beagleboard U-Boot and kernel overrides for $BOARD / $BRANCH" "info"
+
+	declare -g KERNELSOURCE="https://github.com/beagleboard/linux" # BeagleBoard kernel
+	declare -g KERNEL_MAJOR_MINOR="6.6"
+	declare -g KERNELBRANCH="branch:v6.6.58-ti-arm64-r21"
+	declare -g LINUXFAMILY="k3-beagle" # Separate kernel package from the regular `k3` family
+	declare -g LINUXCONFIG="linux-k3-${BRANCH}"
+
+	declare -g BOOTSOURCE="https://github.com/glneo/u-boot" # v2025.04-rc3 + BeagleY-AI support
+	declare -g BOOTBRANCH="branch:beagley-ai"
+	declare -g BOOTPATCHDIR="u-boot-beagle"
+}

config/boards/beelinkx2.tvb

@@ -4,3 +4,4 @@ BOARDFAMILY="sun8i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="beelink_x2_defconfig"
 KERNEL_TARGET="legacy,current,edge"
+KERNEL_TEST_TARGET="current"

config/boards/bigtreetech-cb1.conf

@@ -1,14 +1,13 @@
 # Allwinner H616 quad core 512MB/1GB RAM SoC WiFi
 BOARD_NAME="BigTreeTech CB1"
-BOARDFAMILY="sun50iw9-btt"
-BOARD_MAINTAINER="bigtreetech"
+BOARDFAMILY="sun50iw9"
+BOARD_MAINTAINER="JohnTheCoolingFan"
 BOOTCONFIG="bigtreetech_cb1_defconfig"
-DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0"
-KERNEL_TARGET="legacy,current,edge"
-KERNEL_TEST_TARGET="legacy"
+KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
 FORCE_BOOTSCRIPT_UPDATE="yes"
 BOOTFS_TYPE="fat"
 BOOT_FS_LABEL="BOOT"
 OVERLAY_PREFIX="sun50i-h616"
-BOOT_FDT_FILE="allwinner/sun50i-h616-bigtreetech-cb1-sd.dtb"
+BOOT_FDT_FILE="sun50i-h616-bigtreetech-cb1-sd.dtb"

config/boards/bigtreetech-cb2.conf

@@ -0,0 +1,49 @@
+# Rockchip RK3566 quad core 2GB-8GB GBE eMMC NVMe USB3 WiFi
+BOARD_NAME="BigTreeTech CB2"
+BOARDFAMILY="rockchip64"
+BOARD_MAINTAINER="JohnTheCoolingFan"
+BOOTCONFIG="bigtreetech-cb2-rk3566_defconfig"
+BOOT_SOC="rk3566"
+KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
+BOOT_FDT_FILE="rockchip/rk3566-bigtreetech-pi2.dtb"
+IMAGE_PARTITION_TABLE="gpt"
+BOOT_SCENARIO="spl-blobs"
+OVERLAY_PREFIX='rk3566'
+FULL_DESKTOP="yes"
+BOOT_LOGO="desktop"
+
+# TODO: replace with BOOT_SCENARIO=binman when it gets merged and in good shape
+function post_family_config__bigtreetech-cb2_uboot_overrides() {
+
+	display_alert "$BOARD" "mainline u-boot overrides" "info"
+
+	DDR_BLOB="rk35/rk3566_ddr_1056MHz_v1.21.bin"
+	BL31_BLOB="rk35/rk3568_bl31_v1.44.elf" # NOT a typo, bl31 is shared across 68 and 66
+
+	declare -g BOOTDELAY=1                            # Wait for UART interrupt to enter UMS/RockUSB mode etc
+	declare -g BOOTSOURCE="https://github.com/u-boot/u-boot.git"
+	declare -g BOOTBRANCH="tag:v2024.10"
+	declare -g BOOTPATCHDIR="v2024.10/board_bigtreetech-cb2"
+	#declare -g BOOTDIR="u-boot-${BOARD}"
+	declare -g UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin"
+	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # disable stuff from rockchip64_common; we're using binman here which does all the work already
+
+	# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
+	function write_uboot_platform() {
+		dd "if=${1}/u-boot-rockchip.bin" "of=${2}" bs=32k seek=1 conv=notrunc
+	}
+
+	function write_uboot_platform_mtd() {
+		declare -a extra_opts_flashcp=("--verbose")
+		if flashcp -h | grep -q -e '--partition'; then
+			echo "Confirmed flashcp supports --partition -- read and write only changed blocks." >&2
+			extra_opts_flashcp+=("--partition")
+		else
+			echo "flashcp does not support --partition, will write full SPI flash blocks." >&2
+		fi
+		flashcp "${extra_opts_flashcp[@]}" "${1}/u-boot-rockchip-spi.bin" /dev/mtd0
+	}
+}
+
+# vim: ft=bash

config/boards/cainiao-cniot-core.csc

@@ -0,0 +1,107 @@
+# Amlogic A311D 2GB RAM 16GB eMMC GBE USB3 RTL8822CS WiFi/BT
+BOARD_NAME="CAINIAO CNIoT-CORE"
+BOARDFAMILY="meson-g12b"
+BOARD_MAINTAINER=""
+BOOTCONFIG="cainiao-cniot-core_defconfig"
+KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
+MODULES_BLACKLIST="simpledrm" # SimpleDRM conflicts with Panfrost on the CAINIAO CNIoT-CORE
+FULL_DESKTOP="yes"
+SERIALCON="ttyAML0"
+BOOT_LOGO="desktop"
+BOOT_FDT_FILE="amlogic/meson-g12b-a311d-cainiao-cniot-core.dtb"
+PACKAGE_LIST_BOARD="alsa-ucm-conf" # Contain ALSA UCM top-level configuration file
+
+BOOTBRANCH_BOARD="tag:v2025.04"
+BOOTPATCHDIR="v2025.04" # This has a patch that adds support for CAINIAO CNIoT-CORE.
+
+function post_family_config__use_repacked_fip() {
+	declare -g UBOOT_TARGET_MAP="u-boot.bin"
+	unset write_uboot_platform
+
+	function write_uboot_platform() {
+		dd if="$1/u-boot.bin" of="$2" bs=512 seek=1 conv=fsync 2>&1
+	}
+}
+
+function fetch_sources_tools__get_vendor_fip_and_gxlimg_source() {
+	fetch_from_repo "https://github.com/retro98boy/cainiao-cniot-core-linux.git" "cainiao-cniot-core-linux" "commit:30273c25aeabf75f609cff2c4fa7264335c295a8"
+	fetch_from_repo "https://github.com/repk/gxlimg.git" "gxlimg" "commit:0d0e5ba9cf396d1338067e8dc37a8bcd2e6874f1"
+}
+
+function build_host_tools__install_gxlimg() {
+	# Compile and install only if git commit hash changed
+	cd "${SRC}/cache/sources/gxlimg" || exit
+	# need to check if /usr/local/bin/gxlimg to detect new Docker containers with old cached sources
+	if [[ ! -f .commit_id || $(git rev-parse @ 2> /dev/null) != $(< .commit_id) || ! -f /usr/local/bin/gxlimg ]]; then
+		display_alert "Compiling" "gxlimg" "info"
+		run_host_command_logged make distclean
+		run_host_command_logged make
+		install -Dm0755 gxlimg /usr/local/bin/gxlimg
+		git rev-parse @ 2> /dev/null > .commit_id
+	fi
+}
+
+function post_uboot_custom_postprocess__repack_vendor_fip_with_mainline_uboot() {
+	display_alert "${BOARD}" "Repacking vendor FIP with mainline u-boot.bin" "info"
+
+	BLOBS_DIR="${SRC}/cache/sources/cainiao-cniot-core-linux"
+	EXTRACT_DIR="${BLOBS_DIR}/extract"
+	AML_ENCRYPT="${SRC}/cache/sources/amlogic-boot-fip/khadas-vim3/aml_encrypt_g12b"
+
+	if [ ! -f "$AML_ENCRYPT" ]; then
+		display_alert "${BOARD}" "amlogic-boot-fip/khadas-vim3/aml_encrypt_g12b not exist" "err"
+		exit 1
+	fi
+
+	mv u-boot.bin raw-u-boot.bin
+	rm -f "${EXTRACT_DIR}/bl33.enc"
+	# The current version of gxlimg has a problem with the handling of bl3x,
+	# which may cause the produced fip to fail to boot.
+	# see https://github.com/repk/gxlimg/issues/19
+	# run_host_command_logged gxlimg -t bl3x -s raw-u-boot.bin "${EXTRACT_DIR}/bl33.enc"
+	run_host_x86_binary_logged "$AML_ENCRYPT" --bl3sig \
+		--input raw-u-boot.bin \
+		--output "${EXTRACT_DIR}/bl33.enc" \
+		--level v3 --type bl33
+	run_host_command_logged gxlimg \
+		-t fip \
+		--bl2 "${EXTRACT_DIR}/bl2.sign" \
+		--ddrfw "${EXTRACT_DIR}/ddr4_1d.fw" \
+		--ddrfw "${EXTRACT_DIR}/ddr4_2d.fw" \
+		--ddrfw "${EXTRACT_DIR}/ddr3_1d.fw" \
+		--ddrfw "${EXTRACT_DIR}/piei.fw" \
+		--ddrfw "${EXTRACT_DIR}/lpddr4_1d.fw" \
+		--ddrfw "${EXTRACT_DIR}/lpddr4_2d.fw" \
+		--ddrfw "${EXTRACT_DIR}/diag_lpddr4.fw" \
+		--ddrfw "${EXTRACT_DIR}/aml_ddr.fw" \
+		--ddrfw "${EXTRACT_DIR}/lpddr3_1d.fw" \
+		--bl30 "${EXTRACT_DIR}/bl30.enc" \
+		--bl31 "${EXTRACT_DIR}/bl31.enc" \
+		--bl33 "${EXTRACT_DIR}/bl33.enc" \
+		--rev v3 u-boot.bin
+
+	if [ ! -s u-boot.bin ]; then
+		display_alert "${BOARD}" "FIP repack produced empty u-boot.bin" "err"
+		exit 1
+	fi
+}
+
+function post_family_tweaks_bsp__cainiao-cniot-core() {
+	display_alert "${BOARD}" "Installing ALSA UCM configuration files" "info"
+
+	# Use ALSA UCM via GUI: Install a desktop environment such as GNOME, PipeWire, and WirePlumber.
+
+	# Use ALSA UCM via CLI: alsactl init && alsaucm set _verb "HiFi" set _enadev "HDMI" set _enadev "Speaker"
+	# playback via HDMI: aplay -D plughw:cainiaocniotcor,0 /usr/share/sounds/alsa/Front_Center.wav
+	# playback via internal speaker: aplay -D plughw:cainiaocniotcor,1 /usr/share/sounds/alsa/Front_Center.wav
+
+	install -Dm644 "${SRC}/packages/bsp/cainiao-cniot-core/cainiao-cniot-core-HiFi.conf" "${destination}/usr/share/alsa/ucm2/Amlogic/axg-sound-card/cainiao-cniot-core-HiFi.conf"
+	install -Dm644 "${SRC}/packages/bsp/cainiao-cniot-core/cainiao-cniot-core.conf" "${destination}/usr/share/alsa/ucm2/Amlogic/axg-sound-card/cainiao-cniot-core.conf"
+
+	if [ ! -d "${destination}/usr/share/alsa/ucm2/conf.d/axg-sound-card" ]; then
+		mkdir -p "${destination}/usr/share/alsa/ucm2/conf.d/axg-sound-card"
+	fi
+	ln -sfv /usr/share/alsa/ucm2/Amlogic/axg-sound-card/cainiao-cniot-core.conf \
+		"${destination}/usr/share/alsa/ucm2/conf.d/axg-sound-card/cainiao-cniot-core.conf"
+}

config/boards/cherryba-m1.csc

@@ -0,0 +1,11 @@
+# Allwinner H618 quad core 1GB 2GB 4GB RAM SoC WiFi USB-C emmc
+BOARD_NAME="CherryBa M1"
+BOARDFAMILY="sun50iw9"
+BOOTCONFIG="cherryba-m1_defconfig"
+BOOT_LOGO="desktop"
+KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current,edge" # in case different then kernel target
+FORCE_BOOTSCRIPT_UPDATE="yes"
+BOOTBRANCH_BOARD="tag:v2025.04"
+BOOTPATCHDIR="v2025.04"
+BOARD_MAINTAINER="IsMrX"

config/boards/clearfogbase.csc

@@ -6,3 +6,4 @@ BOOTCONFIG="clearfog_defconfig"
 #BOOTCONFIG_EDGE="clearfogbase_defconfig"  # This had to be disabled because the clearfog is not yet ready for mainline uboot
 HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"

config/boards/clearfogpro.csc

@@ -1,7 +1,7 @@
 # Marvell Armada 38x dual core 1GB/2GB RAM SoC 2xmPCIe M.2 GBE switch SFP
 BOARD_NAME="Clearfog Pro"
 BOARDFAMILY="mvebu"
-BOARD_MAINTAINER=""
+BOARD_MAINTAINER="Heisath"
 BOOTCONFIG="clearfog_defconfig"
 HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="current,edge"

config/boards/clockworkpi-a06.csc

@@ -4,13 +4,14 @@ BOARDFAMILY="rockchip64"
 BOARD_MAINTAINER=""
 BOOTCONFIG="clockworkpi-a06-rk3399_defconfig"
 KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 BOOT_LOGO="no"
 BOOTBRANCH_BOARD="tag:v2022.04"
 BOOTPATCHDIR="u-boot-rockchip64-v2022.04"
 
 function post_family_tweaks_bsp__clockworkpi-a06() {
-    display_alert "Installing BSP firmware and fixups"
+	display_alert "Installing BSP firmware and fixups"
 
 	# rotate screen & disable dpms
 	mkdir -p "$destination"/etc/X11/xorg.conf.d

config/boards/cm3588-nas.csc

@@ -0,0 +1,115 @@
+# Rockchip RK3588 octa core 16GB RAM SoC eMMC 4x NVMe 2x USB3 USB2 USB-C 2.5GbE
+BOARD_NAME="FriendlyElec CM3588 NAS"
+BOARDFAMILY="rockchip-rk3588"
+BOARD_MAINTAINER="ColorfulRhino"
+BOOTCONFIG="cm3588-nas-rk3588_defconfig" # Mainline defconfig, enables booting from NVMe
+BOOT_SOC="rk3588"
+KERNEL_TARGET="current,edge,vendor"
+FULL_DESKTOP="yes"
+BOOT_LOGO="desktop"
+IMAGE_PARTITION_TABLE="gpt"
+BOOT_FDT_FILE="rockchip/rk3588-friendlyelec-cm3588-nas.dtb"
+BOOT_SCENARIO="tpl-blob-atf-mainline"
+UEFI_EDK2_BOARD_ID="nanopc-cm3588-nas" # This _only_ used for uefi-edk2-rk3588 extension; cm3588-nas was introduced in v0.12 of edk2-porting/edk2-rk3588
+
+function post_family_tweaks__cm3588_nas_udev_naming_audios() {
+	display_alert "$BOARD" "Renaming CM3588 audio interfaces to human-readable form" "info"
+
+	mkdir -p $SDCARD/etc/udev/rules.d/
+
+	cat <<- EOF > "${SDCARD}/etc/udev/rules.d/90-naming-audios.rules"
+		SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmi0-sound", ENV{SOUND_DESCRIPTION}="HDMI-0 Audio Out"
+		SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmi1-sound", ENV{SOUND_DESCRIPTION}="HDMI-1 Audio Out"
+		SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-dp0-sound", ENV{SOUND_DESCRIPTION}="DisplayPort-Over-USB Audio Out"
+		SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-rt5616-sound", ENV{SOUND_DESCRIPTION}="Headphone Out/Mic In"
+		SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmiin-sound", ENV{SOUND_DESCRIPTION}="HDMI-IN Audio In"
+	EOF
+}
+
+# Output from CM3588 syslog with edge kernel 6.8: r8169 0004:41:00.0 enP4p65s0: renamed from eth0
+# Note: legacy kernel 5.10 uses driver r8125, edge kernel uses r8169 as of 6.8
+function post_family_tweaks__cm3588_nas_udev_naming_network_interfaces() {
+	display_alert "$BOARD" "Renaming CM3588 LAN interface to eth0" "info"
+
+	mkdir -p $SDCARD/etc/udev/rules.d/
+	cat <<- EOF > "${SDCARD}/etc/udev/rules.d/70-persistent-net.rules"
+		SUBSYSTEM=="net", ACTION=="add", KERNELS=="0004:41:00.0", NAME:="eth0"
+	EOF
+}
+
+# Mainline U-Boot
+function post_family_config__cm3588_nas_use_mainline_uboot() {
+	display_alert "$BOARD" "Using mainline U-Boot for $BOARD / $BRANCH" "info"
+
+	declare -g BOOTDELAY=1                                       # Wait for UART interrupt to enter UMS/RockUSB mode etc
+	declare -g BOOTSOURCE="https://github.com/u-boot/u-boot.git" # We ❤️ Mainline U-Boot
+	declare -g BOOTBRANCH="tag:v2025.01"
+	declare -g BOOTPATCHDIR="v2025.01"
+	declare -g BOOTDIR="u-boot-${BOARD}" # do not share u-boot directory
+	declare -g UBOOT_TARGET_MAP="BL31=bl31.elf ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin"
+	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # Disable stuff from rockchip64_common; we're using binman here which does all the work
+
+	# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
+	function write_uboot_platform() {
+		dd "if=$1/u-boot-rockchip.bin" "of=$2" bs=32k seek=1 conv=notrunc status=none
+	}
+}
+
+function pre_config_uboot_target__cm3588_patch_uboot_dtsi_for_ums() {
+	display_alert "u-boot for ${BOARD}" "u-boot: add to u-boot dtsi for UMS" "info" # avoid a patch, just append to the dtsi file
+	cat <<- UBOOT_BOARD_DTSI_OTG >> arch/arm/dts/rk3588-friendlyelec-cm3588-nas-u-boot.dtsi
+		&u2phy0 { status = "okay"; };
+		&u2phy0_otg { status = "okay"; };
+		&usbdp_phy0 { status = "okay"; };
+		&usb_host0_xhci { dr_mode = "peripheral";  maximum-speed = "high-speed";  status = "okay"; };
+	UBOOT_BOARD_DTSI_OTG
+}
+
+# "rockchip-common: boot SD card first, then NVMe, then mmc"
+# include/configs/rockchip-common.h
+# -#define BOOT_TARGETS "mmc1 mmc0 nvme scsi usb pxe dhcp spi"
+# +#define BOOT_TARGETS "mmc0 nvme mmc1 scsi usb pxe dhcp spi"
+# On cm3588-nas, mmc0 is the eMMC, mmc1 is the SD card slot
+function pre_config_uboot_target__cm3588_patch_rockchip_common_boot_order() {
+	declare -a rockchip_uboot_targets=("mmc1" "nvme" "mmc0" "scsi" "usb" "pxe" "dhcp" "spi") # for future make-this-generic delight
+	display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: adjust boot order to '${rockchip_uboot_targets[*]}'" "info"
+	sed -i -e "s/#define BOOT_TARGETS.*/#define BOOT_TARGETS \"${rockchip_uboot_targets[*]}\"/" include/configs/rockchip-common.h
+	regular_git diff -u include/configs/rockchip-common.h || true
+}
+
+function post_config_uboot_target__extra_configs_for_cm3588-nas_uboot() {
+	display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable preboot & flash user LED in preboot" "info"
+	run_host_command_logged scripts/config --enable CONFIG_USE_PREBOOT
+	run_host_command_logged scripts/config --set-str CONFIG_PREBOOT "'led led-1 on; sleep 0.1; led led-1 off'" # double quotes required due to run_host_command_logged's quirks
+
+	display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable EFI debugging commands" "info"
+	run_host_command_logged scripts/config --enable CMD_EFIDEBUG
+	run_host_command_logged scripts/config --enable CMD_NVEDIT_EFI
+
+	display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable more compression support" "info"
+	run_host_command_logged scripts/config --enable CONFIG_LZO
+	run_host_command_logged scripts/config --enable CONFIG_BZIP2
+	run_host_command_logged scripts/config --enable CONFIG_ZSTD
+
+	display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable gpio LED support" "info"
+	run_host_command_logged scripts/config --enable CONFIG_LED
+	run_host_command_logged scripts/config --enable CONFIG_LED_GPIO
+
+	display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable networking cmds" "info"
+	run_host_command_logged scripts/config --enable CONFIG_CMD_NFS
+	run_host_command_logged scripts/config --enable CONFIG_CMD_WGET
+	run_host_command_logged scripts/config --enable CONFIG_CMD_DNS
+	run_host_command_logged scripts/config --enable CONFIG_PROT_TCP
+	run_host_command_logged scripts/config --enable CONFIG_PROT_TCP_SACK
+
+	# UMS, RockUSB, gadget stuff
+	display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable UMS/RockUSB gadget" "info"
+	declare -a enable_configs=("CONFIG_CMD_USB_MASS_STORAGE" "CONFIG_USB_GADGET" "USB_GADGET_DOWNLOAD" "CONFIG_USB_FUNCTION_ROCKUSB" "CONFIG_USB_FUNCTION_ACM" "CONFIG_CMD_ROCKUSB" "CONFIG_CMD_USB_MASS_STORAGE")
+	for config in "${enable_configs[@]}"; do
+		run_host_command_logged scripts/config --enable "${config}"
+	done
+	# Auto-enabled by the above, force off...
+	run_host_command_logged scripts/config --disable USB_FUNCTION_FASTBOOT
+
+	return 0
+}

config/boards/coolpi-cm5.csc

@@ -1,7 +1,7 @@
 # Rockchip RK3588 SoC octa core 4-16GB SoC 2.5GBe PoE eMMC USB3 NVME
 BOARD_NAME="CoolPi CM5"
 BOARDFAMILY="rockchip-rk3588"
-BOARD_MAINTAINER="Andy Yan"
+BOARD_MAINTAINER="andyshrk"
 BOARD_FIRMWARE_INSTALL="-full"
 BOOT_SOC="rk3588"
 BOOTCONFIG="coolpi-cm5-evb-rk3588_defconfig"
@@ -20,9 +20,9 @@ function post_family_config_branch_edge__coolpi-cm5_use_mainline_uboot() {
 
 	declare -g BOOTSOURCE="https://github.com/Kwiboo/u-boot-rockchip.git" # Kwiboo U-Boot
 	unset BOOTBRANCH
-	unset BOOTPATCHDIR
-	declare -g BOOTBRANCH_BOARD="tag:v2024.07-rc2"                        # commit: 52835266d3e as of v2024.07-rc2
-	declare -g BOOTDIR="u-boot-${BOARD}"                                  # do not share u-boot directory
+	declare -g BOOTPATCHDIR="v2024.07-coolpi-cm5"
+	declare -g BOOTBRANCH_BOARD="tag:v2024.07"
+	declare -g BOOTDIR="u-boot-${BOARD}" # do not share u-boot directory
 	declare -g UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin u-boot-rockchip-spi.bin"
 	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # disable stuff from rockchip64_common; we're using binman here which does all the work already
 
@@ -35,4 +35,3 @@ function post_family_config_branch_edge__coolpi-cm5_use_mainline_uboot() {
 		flashcp -v -p "$1/u-boot-rockchip-spi.bin" /dev/mtd0
 	}
 }
-

config/boards/coolpi-genbook.csc

@@ -0,0 +1,36 @@
+# Rockchip RK3588 SoC octa core 4-16GB SoC eMMC USB3 NVME
+BOARD_NAME="CoolPi GenBook"
+BOARDFAMILY="rockchip-rk3588"
+BOARD_MAINTAINER="andyshrk"
+BOARD_FIRMWARE_INSTALL="-full"
+BOOT_SOC="rk3588"
+BOOTCONFIG="coolpi-cm5-genbook-rk3588_defconfig"
+KERNEL_TARGET="edge,vendor"
+FULL_DESKTOP="yes"
+BOOT_LOGO="desktop"
+BOOT_FDT_FILE="rockchip/rk3588-coolpi-cm5-genbook.dtb"
+BOOT_SCENARIO="spl-blobs"
+BOOT_SUPPORT_SPI="yes"
+BOOT_SPI_RKSPI_LOADER="yes"
+IMAGE_PARTITION_TABLE="gpt"
+
+# Mainline U-Boot
+function post_family_config__coolpi-genbook_use_mainline_uboot() {
+	display_alert "$BOARD" "mainline (next branch) u-boot overrides for $BOARD / $BRANCH" "info"
+
+	declare -g BOOTSOURCE="https://github.com/u-boot/u-boot.git" # Mainline U-Boot
+	unset BOOTBRANCH
+	declare -g BOOTPATCHDIR="v2025.01-rc3-coolpi-cm5"
+	declare -g BOOTBRANCH_BOARD="tag:v2025.04"
+	declare -g UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin u-boot-rockchip-spi.bin"
+	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # disable stuff from rockchip64_common; we're using binman here which does all the work already
+
+	# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
+	function write_uboot_platform() {
+		dd "if=$1/u-boot-rockchip.bin" "of=$2" bs=32k seek=1 conv=notrunc status=none
+	}
+
+	function write_uboot_platform_mtd() {
+		flashcp -v -p "$1/u-boot-rockchip-spi.bin" /dev/mtd0
+	}
+}

config/boards/core3566.csc

@@ -0,0 +1,66 @@
+# Rockchip RK3566 quad core 4/8GB RAM SoC WIFI/BT eMMC USB2 USB3 NVMe PCIe GbE HDMI SPI
+BOARD_NAME="core3566"
+BOARDFAMILY="rk35xx"
+BOARD_MAINTAINER=""
+BOOTCONFIG="orangepi-3b-rk3566_defconfig"
+BOOT_SOC="rk3566"
+KERNEL_TARGET="vendor"
+FULL_DESKTOP="yes"
+BOOT_LOGO="desktop"
+BOOT_FDT_FILE="rockchip/rk3566-core3566.dtb"
+IMAGE_PARTITION_TABLE="gpt"
+BOOT_SCENARIO="spl-blobs"
+BOOT_SUPPORT_SPI="yes"
+BOOT_SPI_RKSPI_LOADER="yes"
+MODULES=""
+MODULES_BLACKLIST_LEGACY="bcmdhd"
+
+# Override family config for this board; let's avoid conditionals in family config.
+function post_family_config__core3566_use_mainline_uboot() {
+	display_alert "$BOARD" "mainline (Kwiboo's tree) u-boot overrides" "info"
+
+	BOOTSOURCE="https://github.com/Kwiboo/u-boot-rockchip.git"
+	BOOTBRANCH="branch:rk3xxx-2024.04" # specific commit tested is commit:ccef7dfc453bc03c5b5c61fa67d2745b96fa7da6
+	BOOTPATCHDIR="v2024.04-orangepi3b" # empty, patches are already in Kwiboo's branch:rk3xxx-2024.04
+
+	BOOTDIR="u-boot-${BOARD}" # do not share u-boot directory
+
+	BOOTDELAY=1 # Wait for UART interrupt to enter UMS/RockUSB mode etc
+	UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin u-boot-rockchip-spi.bin u-boot.itb idbloader.img idbloader-spi.img"
+	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # disable stuff from rockchip64_common; we're using binman here which does all the work already
+
+	# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
+	function write_uboot_platform() {
+		dd if=${1}/u-boot-rockchip.bin of=${2} bs=32k seek=1 conv=fsync
+	}
+
+	# Smarter/faster/better to-spi writer using flashcp (hopefully with --partition), using the binman-provided 'u-boot-rockchip-spi.bin'
+	function write_uboot_platform_mtd() {
+		declare -a extra_opts_flashcp=("--verbose")
+		if flashcp -h | grep -q -e '--partition'; then
+			echo "Confirmed flashcp supports --partition -- read and write only changed blocks." >&2
+			extra_opts_flashcp+=("--partition")
+		else
+			echo "flashcp does not support --partition, will write full SPI flash blocks." >&2
+		fi
+		flashcp "${extra_opts_flashcp[@]}" "${1}/u-boot-rockchip-spi.bin" /dev/mtd0
+	}
+
+}
+
+function post_family_tweaks_bsp__core3566() {
+	# display_alert "$BOARD" "Installing sprd-bluetooth.service" "info"
+
+	# Bluetooth on core3566 board is handled by a Spreadtrum (sprd) chip and requires
+	# a custom hciattach_opi binary, plus a systemd service to run it at boot time
+	#install -m 755 $SRC/packages/bsp/rk3399/hciattach_opi $destination/usr/bin
+	# cp $SRC/packages/bsp/rk3399/sprd-bluetooth.service $destination/lib/systemd/system/
+
+	return 0
+}
+
+function post_family_tweaks__core3566_enable_services() {
+	# display_alert "$BOARD" "Enabling sprd-bluetooth.service" "info"
+	# chroot_sdcard systemctl enable sprd-bluetooth.service
+	return 0
+}

config/boards/cubieboard.csc

@@ -5,7 +5,7 @@ BOARD_MAINTAINER=""
 BOOTCONFIG="Cubieboard_config"
 HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"
-KERNEL_TEST_TARGET="edge"
+KERNEL_TEST_TARGET="current"
 MODULES_BLACKLIST="ir_lirc_codec lirc_dev sunxi-cir"
 
 function post_config_uboot_target__extra_configs_for_cubieboard() {

config/boards/cubieboard2.csc

@@ -4,6 +4,7 @@ BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Cubieboard2_config"
 KERNEL_TARGET="legacy,current,edge"
+KERNEL_TEST_TARGET="current"
 
 function post_config_uboot_target__extra_configs_for_cubieboard2() {
 	display_alert "$BOARD" "set dram clock" "info"

config/boards/cubieboard4.csc

@@ -4,3 +4,4 @@ BOARDFAMILY="sun9i"
 BOARD_MAINTAINER=""
 BOOTCONFIG=Cubieboard4_defconfig
 KERNEL_TARGET="legacy,current,edge"
+KERNEL_TEST_TARGET="current"

config/boards/cubietruck.csc

@@ -4,4 +4,4 @@ BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Cubietruck_config"
 KERNEL_TARGET="legacy,current,edge"
-KERNEL_TEST_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"

config/boards/cubox-i.csc

@@ -4,6 +4,7 @@ BOARDFAMILY="imx6"
 BOARD_MAINTAINER=""
 BOOTCONFIG="mx6cuboxi_defconfig"
 KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"
 PACKAGE_LIST_BOARD="rfkill bluetooth bluez bluez-tools"

config/boards/cyber-aib-rk3588.csc

@@ -0,0 +1,23 @@
+# Rockchip RK3588 octa core 8/16GB RAM SoC 64/128GB eMMC NVMe 1x USB3 1x USB-C 2x 2.5GbE 2x HDMI
+BOARD_NAME="Cyber Aib RK3588"
+BOARDFAMILY="rockchip-rk3588"
+BOARD_MAINTAINER=""
+BOOTCONFIG="rk3588-cyber-aib_defconfig"
+KERNEL_TARGET="vendor,edge"
+FULL_DESKTOP="yes"
+BOOT_LOGO="desktop"
+BOOT_FDT_FILE="rockchip/rk3588-cyber-aib.dtb"
+BOOT_SCENARIO="spl-blobs"
+BOOT_SOC="rk3588"
+IMAGE_PARTITION_TABLE="gpt"
+
+function post_family_tweaks__cyberaib_naming_audios() {
+	display_alert "$BOARD" "Renaming cyber-aib audios" "info"
+
+	mkdir -p $SDCARD/etc/udev/rules.d/
+	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmi0-sound", ENV{SOUND_DESCRIPTION}="HDMI0 Audio"' > $SDCARD/etc/udev/rules.d/90-naming-audios.rules
+	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmiin-sound", ENV{SOUND_DESCRIPTION}="HDMI-In Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules
+	echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-dp0-sound", ENV{SOUND_DESCRIPTION}="DP0 Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules
+
+	return 0
+}

config/boards/dshanpi-r1.csc

@@ -0,0 +1,30 @@
+# Rockchip RK3568 quad core 1-8GB SoC GBe eMMC USB3
+BOARD_NAME="100ASK DShanPI R1"
+BOARDFAMILY="rk35xx"
+BOARD_MAINTAINER=""
+BOOTCONFIG="dshanpi-r1-rk3568_defconfig"
+KERNEL_TARGET="vendor"
+KERNEL_TEST_TARGET="vendor"
+FULL_DESKTOP="yes"
+BOOT_LOGO="desktop"
+BOOT_FDT_FILE="rockchip/rk3568-dshapi-r1.dtb"
+BOOT_SCENARIO="spl-blobs"
+IMAGE_PARTITION_TABLE="gpt"
+
+function post_family_config__dshanpi-r1_use_mainline_uboot() {
+	display_alert "$BOARD" "Mainline U-Boot overrides for $BOARD - $BRANCH" "info"
+	unset BOOTFS_TYPE # fixes armbian-install and unneeded for modern uboot anyway
+	declare -g BOOTCONFIG="dshanpi-r1-rk3568_defconfig"
+	declare -g BOOTDELAY=1
+	declare -g BOOTSOURCE="https://github.com/u-boot/u-boot"
+	declare -g BOOTBRANCH="tag:v2024.10"
+	declare -g BOOTPATCHDIR="v2024.10"
+	declare -g BOOTDIR="u-boot-${BOARD}" # do not share u-boot directory
+	declare -g UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin u-boot-rockchip-spi.bin"
+	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # disable stuff from rockchip64_common; we're using binman here which does all the work already
+
+	# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
+	function write_uboot_platform() {
+		dd "if=$1/u-boot-rockchip.bin" "of=$2" bs=32k seek=1 conv=notrunc status=none
+	}
+}

config/boards/espressobin.eos

@@ -1,7 +1,7 @@
 # Marvell Armada 37x 512MB-2GB RAM SoC 1xmPCIe 1xSATA 3xGBE USB3.0 eMMC SPI
 BOARD_NAME="Espressobin"
 BOARDFAMILY="mvebu64"
-BOARD_MAINTAINER="ManoftheSea"
+BOARD_MAINTAINER=""
 BOOTCONFIG="mvebu_espressobin-88f3720_defconfig"
 HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="current,edge"

config/boards/fine3399.csc

@@ -4,6 +4,7 @@ BOARDFAMILY="rockchip64"
 BOARD_MAINTAINER=""
 BOOTCONFIG="fine3399-rk3399_defconfig"
 KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"
 BOOT_FDT_FILE="rockchip/rk3399-fine3399.dtb"