Add new TVBox aml-c400-plus: Magicsee C400 Plus

config/boards/aml-c400-plus.tvb

@@ -0,0 +1,51 @@
+# Amlogic S912 octa core 3Gb RAM SoC eMMC
+BOARD_NAME="Magicsee C400 Plus"
+BOARDFAMILY="meson-gxl"
+BOARD_MAINTAINER="jomadeto"
+BOOTSIZE="512"
+BOOTFS_TYPE="fat"
+KERNEL_TARGET="current,edge"
+MODULES_BLACKLIST="simpledrm" # SimpleDRM conflicts with Panfrost
+KERNEL_TEST_TARGET="current"
+SERIALCON="ttyAML0"
+FULL_DESKTOP="yes"
+ASOUND_STATE="asound.state.mesongx"
+BOOT_FDT_FILE="amlogic/meson-gxm-c400-plus.dtb"
+BOOT_LOGO="desktop"
+SRC_EXTLINUX="no"
+SRC_CMDLINE='rootflags=data=writeback console=ttyAML0,115200n8 console=tty0'
+
+function post_family_config__uboot_aml-c400-plus() {
+	# This board type relies on the vendor installed u-boot on emmc to boot
+	display_alert "$BOARD" "Configuring ($BOARD) non-u-boot" "info"
+	unset BOOTSOURCE
+	declare -g BOOTCONFIG='none'
+}
+
+function post_family_tweaks_bsp__config_aml-c400-plus_bsp() {
+	: "${destination:?destination is not set}"
+
+	# Important: this board has board-specific bsp-cli files in config/optional/boards/aml-c400-plus/_packages/bsp-cli
+	#            that path is hashed by the bsp-cli hashing function automatically
+	display_alert "${BOARD}" "Adjusting perms of bsp-cli files for ${BOARD} in /root" "info"
+	run_host_command_logged chmod -v 744 "${destination}"/root/install-aml.sh
+	run_host_command_logged chmod -v 644 "${destination}"/root/fstab.template
+
+	display_alert "${BOARD}" "Removing armbian-install" "info"
+	run_host_command_logged rm -v "${destination}"/usr/bin/armbian-install
+
+	display_alert "${BOARD}" "Adding bsp-cli preinst logic" "info"
+	# Inline function! So this function is automatically hashed when this hook is hashed.
+	function aml-c400-plus-bsp-cli-preinst() {
+		#update of the board bsp-cli package fails because the filesystem type is
+		#fat and dpkg tries to create a hard link for the existing files as backup
+		#so rm the files instead in a preinst step
+		[ -f /boot/armbianEnv.txt ] && rm /boot/armbianEnv.txt
+		[ -f /boot/aml_autoscript ] && rm /boot/aml_autoscript
+		[ -f /boot/emmc_autoscript ] && rm /boot/emmc_autoscript
+		return 0 # short-circuits above, avoid errors
+	}
+	preinst_functions+=('aml-c400-plus-bsp-cli-preinst')
+	if false; then aml-c400-plus-bsp-cli-preinst; fi # so shellcheck stops complaining the function is unused. sorry
+
+}

config/optional/boards/aml-c400-plus/_packages/bsp-cli/boot/armbianEnv.txt

@@ -0,0 +1,5 @@
+extraargs=earlycon rootflags=data=writeback rw no_console_suspend consoleblank=0 fsck.fix=yes fsck.repair=yes net.ifnames=0
+bootlogo=false
+verbosity=7
+console=both
+fdtfile=amlogic/meson-gxm-c400-plus.dtb

config/optional/boards/aml-c400-plus/_packages/bsp-cli/root/fstab.template

@@ -0,0 +1,7 @@
+#/var/swap none swap sw 0 0
+#/dev/root	/		auto		noatime,errors=remount-ro	0 1
+#proc		/proc		proc		defaults				0 0
+
+/dev/root	/		ext4		defaults,noatime,errors=remount-ro	0 1
+tmpfs		/tmp		tmpfs		defaults,nosuid				0 0
+LABEL=BOOT_EMMC	/boot		vfat		defaults				0 2

config/optional/boards/aml-c400-plus/_packages/bsp-cli/root/install-aml.sh

@@ -0,0 +1,198 @@
+#!/bin/sh
+
+echo "Start script create MBR and filesystem"
+
+hasdrives=$(lsblk | grep -oE '(mmcblk[0-9])' | sort | uniq)
+if [ "$hasdrives" = "" ]
+then
+	echo "UNABLE TO FIND ANY EMMC OR SD DRIVES ON THIS SYSTEM!!! "
+	exit 1
+fi
+avail=$(lsblk | grep -oE '(mmcblk[0-9]|sda[0-9])' | sort | uniq)
+if [ "$avail" = "" ]
+then
+	echo "UNABLE TO FIND ANY DRIVES ON THIS SYSTEM!!!"
+	exit 1
+fi
+
+#unmount /var/log.hdd so logic below can find the root partition
+umount /var/log.hdd
+
+runfrom=$(lsblk | grep /$ | grep -oE '(mmcblk[0-9]|sda[0-9])')
+if [ "$runfrom" = "" ]
+then
+	echo " UNABLE TO FIND ROOT OF THE RUNNING SYSTEM!!! "
+	exit 1
+fi
+emmc=$(echo $avail | sed "s/$runfrom//" | sed "s/sd[a-z][0-9]//g" | sed "s/ //g")
+if [ "$emmc" = "" ]
+then
+	echo " UNABLE TO FIND YOUR EMMC DRIVE OR YOU ALREADY RUN FROM EMMC!!!"
+	exit 1
+fi
+if [ "$runfrom" = "$avail" ]
+then
+	echo " YOU ARE RUNNING ALREADY FROM EMMC!!! "
+	exit 1
+fi
+if [ $runfrom = $emmc ]
+then
+	echo " YOU ARE RUNNING ALREADY FROM EMMC!!! "
+	exit 1
+fi
+if [ "$(echo $emmc | grep mmcblk)" = "" ]
+then
+	echo " YOU DO NOT APPEAR TO HAVE AN EMMC DRIVE!!! "
+	exit 1
+fi
+
+DEV_EMMC="/dev/$emmc"
+
+echo $DEV_EMMC
+
+echo "Start backup u-boot default"
+
+dd if="${DEV_EMMC}" of=/root/u-boot-default-aml.img bs=1M count=4
+
+echo "Start create MBR and partittion"
+
+parted -s "${DEV_EMMC}" mklabel msdos
+parted -s "${DEV_EMMC}" mkpart primary fat32 512M 1024M
+parted -s "${DEV_EMMC}" mkpart primary ext4 1025M 100%
+
+echo "Start restore u-boot"
+
+dd if=/root/u-boot-default-aml.img of="${DEV_EMMC}" conv=fsync bs=1 count=442
+dd if=/root/u-boot-default-aml.img of="${DEV_EMMC}" conv=fsync bs=512 skip=1 seek=1
+
+sync
+
+echo "Done"
+
+echo "Start copy system for eMMC."
+
+mkdir -p /ddbr
+chmod 777 /ddbr
+
+PART_BOOT="${DEV_EMMC}p1"
+PART_ROOT="${DEV_EMMC}p2"
+DIR_INSTALL="/ddbr/install"
+
+if [ -d $DIR_INSTALL ] ; then
+    rm -rf $DIR_INSTALL
+fi
+mkdir -p $DIR_INSTALL
+
+if grep -q $PART_BOOT /proc/mounts ; then
+    echo "Unmounting BOOT partiton."
+    umount -f $PART_BOOT
+fi
+echo -n "Formatting BOOT partition..."
+mkfs.vfat -n "BOOT_EMMC" $PART_BOOT
+echo "done."
+
+mount -o rw $PART_BOOT $DIR_INSTALL
+
+echo -n "Copying BOOT..."
+cp -r /boot/* $DIR_INSTALL && sync
+echo "done."
+
+echo -n "Edit init config..."
+sed -e "s/\(rootdev=UUID\)\([[:graph:]]\)*/rootdev=LABEL=ROOT_EMMC/gi" \
+ -i "$DIR_INSTALL/armbianEnv.txt"
+echo "done."
+
+rm $DIR_INSTALL/s9*
+rm $DIR_INSTALL/aml*
+
+if [ -f /boot/u-boot.ext ] ; then
+    mv -f $DIR_INSTALL/u-boot.ext $DIR_INSTALL/u-boot.emmc
+
+    sed -e "s/u-boot.ext/u-boot.emmc/g" \
+     -i "$DIR_INSTALL/boot.ini"
+    echo "done."
+
+    sync
+fi
+
+umount $DIR_INSTALL
+
+if grep -q $PART_ROOT /proc/mounts ; then
+    echo "Unmounting ROOT partiton."
+    umount -f $PART_ROOT
+fi
+
+echo "Formatting ROOT partition..."
+mke2fs -F -q -t ext4 -L ROOT_EMMC -m 0 $PART_ROOT
+e2fsck -n $PART_ROOT
+echo "done."
+
+echo "Copying ROOTFS."
+
+mount -o rw $PART_ROOT $DIR_INSTALL
+
+cd /
+echo "Copy BIN"
+tar -cf - bin | (cd $DIR_INSTALL; tar -xpf -)
+#echo "Copy BOOT"
+#mkdir -p $DIR_INSTALL/boot
+#tar -cf - boot | (cd $DIR_INSTALL; tar -xpf -)
+echo "Create DEV"
+mkdir -p $DIR_INSTALL/dev
+#tar -cf - dev | (cd $DIR_INSTALL; tar -xpf -)
+echo "Copy ETC"
+tar -cf - etc | (cd $DIR_INSTALL; tar -xpf -)
+echo "Copy HOME"
+tar -cf - home | (cd $DIR_INSTALL; tar -xpf -)
+echo "Copy LIB"
+tar -cf - lib | (cd $DIR_INSTALL; tar -xpf -)
+echo "Copy LIB64"
+tar -cf - lib64 | (cd $DIR_INSTALL; tar -xpf -)
+echo "Create MEDIA"
+mkdir -p $DIR_INSTALL/media
+#tar -cf - media | (cd $DIR_INSTALL; tar -xpf -)
+echo "Create MNT"
+mkdir -p $DIR_INSTALL/mnt
+#tar -cf - mnt | (cd $DIR_INSTALL; tar -xpf -)
+echo "Copy OPT"
+tar -cf - opt | (cd $DIR_INSTALL; tar -xpf -)
+echo "Create PROC"
+mkdir -p $DIR_INSTALL/proc
+echo "Copy ROOT"
+tar -cf - root | (cd $DIR_INSTALL; tar -xpf -)
+echo "Create RUN"
+mkdir -p $DIR_INSTALL/run
+echo "Copy SBIN"
+tar -cf - sbin | (cd $DIR_INSTALL; tar -xpf -)
+echo "Copy SELINUX"
+tar -cf - selinux | (cd $DIR_INSTALL; tar -xpf -)
+echo "Copy SRV"
+tar -cf - srv | (cd $DIR_INSTALL; tar -xpf -)
+echo "Create SYS"
+mkdir -p $DIR_INSTALL/sys
+echo "Create TMP"
+mkdir -p $DIR_INSTALL/tmp
+echo "Copy USR"
+tar -cf - usr | (cd $DIR_INSTALL; tar -xpf -)
+echo "Copy VAR"
+tar -cf - var | (cd $DIR_INSTALL; tar -xpf -)
+sync
+
+echo "Copy fstab"
+
+rm $DIR_INSTALL/etc/fstab
+cp -a /root/fstab.template $DIR_INSTALL/etc/fstab
+
+rm $DIR_INSTALL/root/install*.sh
+rm $DIR_INSTALL/root/fstab.template
+rm $DIR_INSTALL/usr/bin/ddbr
+
+
+cd /
+sync
+
+umount $DIR_INSTALL
+
+echo "*******************************************"
+echo "Complete copy OS to eMMC "
+echo "*******************************************"

config/sources/families/include/meson64_common.inc

@@ -268,7 +268,7 @@ family_tweaks_bsp() {
 
 	mkdir -p "$destination"/etc/X11/xorg.conf.d
 	case "${BOARD}" in
-		"odroidc2" | "nanopik2-s905" | "lepotato" | "lafrite" | "khadas-vim1" | "khadas-vim2" | "aml-s9xx-box")
+		"odroidc2" | "nanopik2-s905" | "lepotato" | "lafrite" | "khadas-vim1" | "khadas-vim2" | "aml-c400-plus" | "aml-s9xx-box")
 			cat <<- EOF > "$destination"/etc/X11/xorg.conf.d/02-driver.conf
 				Section "OutputClass"
 				    Identifier "Amlogic"

config/sources/families/meson-gxl.conf

@@ -38,6 +38,10 @@ uboot_custom_postprocess() {
 		uboot_gxl_postprocess $SRC/cache/sources/odroidc2-blobs/ gxl
 	fi
 
+	if [[ $BOARD == aml-c400-plus ]]; then
+		uboot_gxl_postprocess $SRC/cache/sources/odroidc2-blobs/ gxl
+	fi
+
 	if [[ $BOARD == aml-s9xx-box ]]; then
 		uboot_gxl_postprocess $SRC/cache/sources/odroidc2-blobs/ gxl
 	fi