Revert "linux-rk35xx-vendor: Add and enable LTE em05 driver ( Enables support…"

This reverts commit a6cfb44448.

.github/CODEOWNERS

@@ -69,6 +69,7 @@ config/boards/khadas-vim2.conf		@igorpecovnik
 config/boards/khadas-vim3.conf		@NicoD-SBC @rpardini
 config/boards/khadas-vim3l.conf		@rpardini
 config/boards/khadas-vim4.conf		@adeepn @rpardini @viraniac
+config/boards/kickpik2b.csc		@pyavitz
 config/boards/lafrite.conf		@Tonymac32
 config/boards/leez-p710.csc		@andyshrk
 config/boards/lepotato.conf		@Tonymac32
@@ -78,9 +79,6 @@ config/boards/lubancat2.csc		@andyshrk
 config/boards/mangopi-m28k.csc		@sputnik2019
 config/boards/mba8mpxl-ras314.conf		@schmiedelm
 config/boards/mba8mpxl.conf		@schmiedelm
-config/boards/mekotronics-r58-minipc.conf		@monkaBlyat
-config/boards/mekotronics-r58x-4g.csc		@monkaBlyat
-config/boards/mekotronics-r58x.conf		@monkaBlyat
 config/boards/mixtile-blade3.csc		@rpardini
 config/boards/mksklipad50.conf		@torte71
 config/boards/mkspi.csc		@redrathnure
@@ -134,7 +132,6 @@ config/boards/radxa-e25.csc		@krachlatte
 config/boards/radxa-e52c.conf		@amazingfate
 config/boards/radxa-nio-12l.conf		@HeyMeco
 config/boards/radxa-zero.conf		@clee @engineer-80
-config/boards/radxa-zero2.csc		@monkaBlyat
 config/boards/recore.csc		@eliasbakken
 config/boards/renegade.conf		@Tonymac32
 config/boards/retro-lite-cm5.csc		@ginkage
@@ -186,13 +183,13 @@ config/kernel/linux-k3-*.config		@Grippy98 @glneo
 config/kernel/linux-k3-beagle-*.config		@Grippy98
 config/kernel/linux-meson-*.config		@hzyitc @juanlufont
 config/kernel/linux-meson-s4t7-*.config		@adeepn @rpardini @viraniac
-config/kernel/linux-meson64-*.config		@NicoD-SBC @SteeManMI @Tonymac32 @adeepn @clee @engineer-80 @igorpecovnik @jeanrhum @jomadeto @monkaBlyat @pyavitz @rpardini @teknoid
+config/kernel/linux-meson64-*.config		@NicoD-SBC @SteeManMI @Tonymac32 @adeepn @clee @engineer-80 @igorpecovnik @jeanrhum @jomadeto @pyavitz @rpardini @teknoid
 config/kernel/linux-mvebu-*.config		@Heisath
 config/kernel/linux-odroidxu4-*.config		@joekhoobyar
 config/kernel/linux-phytium-embedded-*.config		@chainsx
-config/kernel/linux-rk35xx-*.config		@CodeChenL @ColorfulRhino @HeyMeco @JackHuang021 @SeeleVolleri @SuperKali @Tonymac32 @ZazaBR @alexl83 @amazingfate @andyshrk @catalinii @chainsx @efectn @fridtjof @ginkage @hoochiwetech @hqnicolas @krachlatte @lanefu @linhz0hz @mahdichi @mattx433 @monkaBlyat @prahal @rpardini @schwar3kat @sputnik2019 @vamzii
+config/kernel/linux-rk35xx-*.config		@CodeChenL @ColorfulRhino @HeyMeco @JackHuang021 @SeeleVolleri @SuperKali @Tonymac32 @ZazaBR @alexl83 @amazingfate @andyshrk @catalinii @chainsx @efectn @fridtjof @ginkage @hoochiwetech @hqnicolas @krachlatte @lanefu @linhz0hz @mahdichi @mattx433 @prahal @rpardini @schwar3kat @sputnik2019 @vamzii
 config/kernel/linux-rockchip-*.config		@paolosabatino
-config/kernel/linux-rockchip64-*.config		@150balbes @ColorfulRhino @HeyMeco @JohnTheCoolingFan @SuperKali @TRSx80 @TheSnowfield @Tonymac32 @ZazaBR @ahoneybun @alexl83 @amazingfate @andyshrk @brentr @catalinii @clee @efectn @fridtjof @hqnicolas @igorpecovnik @joekhoobyar @krachlatte @lanefu @linhz0hz @mlegenovic @paolosabatino @prahal @pyavitz @redrathnure @rpardini @schwar3kat @sicXnull @tdleiyao @torte71 @utlark @vamzii
+config/kernel/linux-rockchip64-*.config		@150balbes @ColorfulRhino @HeyMeco @JohnTheCoolingFan @SuperKali @TRSx80 @TheSnowfield @Tonymac32 @ZazaBR @ahoneybun @alexl83 @amazingfate @andyshrk @brentr @catalinii @chainsx @clee @efectn @fridtjof @hqnicolas @igorpecovnik @joekhoobyar @krachlatte @lanefu @linhz0hz @mlegenovic @paolosabatino @prahal @pyavitz @redrathnure @rpardini @schwar3kat @sicXnull @tdleiyao @torte71 @utlark @vamzii
 config/kernel/linux-sm8250-*.config		@FantasyGmm @amazingfate
 config/kernel/linux-sm8550-*.config		@FantasyGmm
 config/kernel/linux-spacemit-*.config		@pyavitz
@@ -226,11 +223,11 @@ patch/kernel/archive/k3-*/		@Grippy98 @glneo
 patch/kernel/archive/k3-beagle-*/		@Grippy98
 patch/kernel/archive/meson-*/		@hzyitc @juanlufont
 patch/kernel/archive/meson-s4t7-*/		@adeepn @rpardini @viraniac
-patch/kernel/archive/meson64-*/		@NicoD-SBC @SteeManMI @Tonymac32 @adeepn @clee @engineer-80 @igorpecovnik @jeanrhum @jomadeto @monkaBlyat @pyavitz @rpardini @teknoid
+patch/kernel/archive/meson64-*/		@NicoD-SBC @SteeManMI @Tonymac32 @adeepn @clee @engineer-80 @igorpecovnik @jeanrhum @jomadeto @pyavitz @rpardini @teknoid
 patch/kernel/archive/mvebu-*/		@Heisath
 patch/kernel/archive/odroidxu4-*/		@joekhoobyar
 patch/kernel/archive/rockchip-*/		@paolosabatino
-patch/kernel/archive/rockchip64-*/		@150balbes @ColorfulRhino @HeyMeco @JohnTheCoolingFan @SuperKali @TRSx80 @TheSnowfield @Tonymac32 @ZazaBR @ahoneybun @alexl83 @amazingfate @andyshrk @brentr @catalinii @clee @efectn @fridtjof @hqnicolas @igorpecovnik @joekhoobyar @krachlatte @lanefu @linhz0hz @mlegenovic @paolosabatino @prahal @pyavitz @redrathnure @rpardini @schwar3kat @sicXnull @tdleiyao @torte71 @utlark @vamzii
+patch/kernel/archive/rockchip64-*/		@150balbes @ColorfulRhino @HeyMeco @JohnTheCoolingFan @SuperKali @TRSx80 @TheSnowfield @Tonymac32 @ZazaBR @ahoneybun @alexl83 @amazingfate @andyshrk @brentr @catalinii @chainsx @clee @efectn @fridtjof @hqnicolas @igorpecovnik @joekhoobyar @krachlatte @lanefu @linhz0hz @mlegenovic @paolosabatino @prahal @pyavitz @redrathnure @rpardini @schwar3kat @sicXnull @tdleiyao @torte71 @utlark @vamzii
 patch/kernel/archive/sm8250-*/		@FantasyGmm @amazingfate
 patch/kernel/archive/sm8550-*/		@FantasyGmm
 patch/kernel/archive/spacemit-*/		@pyavitz
@@ -241,7 +238,7 @@ patch/kernel/archive/wsl2-arm64-*/		@rpardini
 patch/kernel/archive/wsl2-x86-*/		@rpardini
 patch/kernel/genio-1200-*/		@HeyMeco
 patch/kernel/phytium-embedded-*/		@chainsx
-patch/kernel/rk35xx-vendor-*/		@CodeChenL @ColorfulRhino @HeyMeco @JackHuang021 @SeeleVolleri @SuperKali @Tonymac32 @ZazaBR @alexl83 @amazingfate @andyshrk @catalinii @chainsx @efectn @fridtjof @ginkage @hoochiwetech @hqnicolas @krachlatte @lanefu @linhz0hz @mahdichi @mattx433 @monkaBlyat @prahal @rpardini @schwar3kat @sputnik2019 @vamzii
+patch/kernel/rk35xx-vendor-*/		@CodeChenL @ColorfulRhino @HeyMeco @JackHuang021 @SeeleVolleri @SuperKali @Tonymac32 @ZazaBR @alexl83 @amazingfate @andyshrk @catalinii @chainsx @efectn @fridtjof @ginkage @hoochiwetech @hqnicolas @krachlatte @lanefu @linhz0hz @mahdichi @mattx433 @prahal @rpardini @schwar3kat @sputnik2019 @vamzii
 patch/kernel/starfive2-*/		@libiunc
 patch/kernel/sun55iw3-syterkit-*/		@chainsx
 patch/kernel/thead-*/		@chainsx
@@ -250,7 +247,7 @@ patch/u-boot/legacy/		@chainsx @joekhoobyar @juanlufont @lanefu
 patch/u-boot/legacy/u-boot-clearfog/		@Heisath
 patch/u-boot/legacy/u-boot-helios4/		@Heisath
 patch/u-boot/legacy/u-boot-khadas-edge2-rk3588/		@efectn
-patch/u-boot/legacy/u-boot-radxa-rk35xx/		@CodeChenL @HeyMeco @JackHuang021 @SeeleVolleri @SuperKali @Tonymac32 @ZazaBR @alexl83 @amazingfate @catalinii @chainsx @efectn @fridtjof @ginkage @hoochiwetech @hqnicolas @krachlatte @linhz0hz @mahdichi @mattx433 @monkaBlyat @prahal @rpardini @schwar3kat @sputnik2019 @tdleiyao @vamzii
+patch/u-boot/legacy/u-boot-radxa-rk35xx/		@CodeChenL @HeyMeco @JackHuang021 @SeeleVolleri @SuperKali @Tonymac32 @ZazaBR @alexl83 @amazingfate @catalinii @chainsx @efectn @fridtjof @ginkage @hoochiwetech @hqnicolas @krachlatte @linhz0hz @mahdichi @mattx433 @prahal @rpardini @schwar3kat @sputnik2019 @tdleiyao @vamzii
 patch/u-boot/legacy/u-boot-spacemit-k1/		@pyavitz
 patch/u-boot/u-boot-beagle/		@Grippy98
 patch/u-boot/u-boot-k3-beagle/		@Grippy98
@@ -274,7 +271,7 @@ patch/u-boot/v2024.01/board_orangepi5/		@efectn
 patch/u-boot/v2024.04-rock5b-radxa/		@amazingfate @linhz0hz
 patch/u-boot/v2024.04/		@Tonymac32 @utlark
 patch/u-boot/v2024.07-coolpi-cm5/		@andyshrk
-patch/u-boot/v2024.07/		@adeepn @igorpecovnik @monkaBlyat
+patch/u-boot/v2024.07/		@adeepn @igorpecovnik
 patch/u-boot/v2024.07/board_station-m1/		@150balbes
 patch/u-boot/v2024.10/		@alexl83 @brentr @pyavitz
 patch/u-boot/v2024.10/board_bigtreetech-cb2/		@JohnTheCoolingFan
@@ -283,6 +280,7 @@ patch/u-boot/v2025.01-rc3-coolpi-cm5/		@andyshrk
 patch/u-boot/v2025.01/		@ColorfulRhino @efectn @jeanrhum @joekhoobyar @paolosabatino @pyavitz @rpardini @torte71
 patch/u-boot/v2025.01/board_h96-tvbox-3566/		@hqnicolas
 patch/u-boot/v2025.04/		@HeyMeco @IsMrX @NicoD-SBC @SuperKali @TheSnowfield @Tonymac32 @ZazaBR @amazingfate @andyshrk @catalinii @fridtjof @igorpecovnik @mlegenovic @pyavitz @rpardini @vamzii
+patch/u-boot/v2025.07/		@pyavitz
 sources/families/bcm2711.conf		@PanderMusubi @teknoid
 sources/families/genio.conf		@HeyMeco
 sources/families/imx8m.conf		@schmiedelm
@@ -290,7 +288,7 @@ sources/families/jethub.conf		@adeepn
 sources/families/k3.conf		@Grippy98 @glneo
 sources/families/meson-axg.conf		@pyavitz
 sources/families/meson-g12a.conf		@clee @engineer-80
-sources/families/meson-g12b.conf		@NicoD-SBC @Tonymac32 @jeanrhum @monkaBlyat @pyavitz @rpardini
+sources/families/meson-g12b.conf		@NicoD-SBC @Tonymac32 @jeanrhum @pyavitz @rpardini
 sources/families/meson-gxbb.conf		@teknoid
 sources/families/meson-gxl.conf		@SteeManMI @Tonymac32 @igorpecovnik @jomadeto
 sources/families/meson-s4t7.conf		@adeepn @rpardini @viraniac
@@ -300,7 +298,7 @@ sources/families/mvebu.conf		@Heisath
 sources/families/odroidxu4.conf		@joekhoobyar
 sources/families/phytium-embedded.conf		@chainsx
 sources/families/rk35xx.conf		@CodeChenL @ZazaBR @amazingfate @andyshrk @catalinii @hoochiwetech @hqnicolas @krachlatte @mattx433 @pyavitz @sputnik2019 @tdleiyao @vamzii
-sources/families/rockchip-rk3588.conf		@ColorfulRhino @HeyMeco @JackHuang021 @SeeleVolleri @SuperKali @Tonymac32 @alexl83 @amazingfate @andyshrk @chainsx @efectn @fridtjof @ginkage @lanefu @linhz0hz @mahdichi @monkaBlyat @prahal @rpardini @schwar3kat
+sources/families/rockchip-rk3588.conf		@ColorfulRhino @HeyMeco @JackHuang021 @SeeleVolleri @SuperKali @Tonymac32 @alexl83 @amazingfate @andyshrk @chainsx @efectn @fridtjof @ginkage @lanefu @linhz0hz @mahdichi @prahal @rpardini @schwar3kat
 sources/families/rockchip.conf		@paolosabatino
 sources/families/rockchip64.conf		@150balbes @JohnTheCoolingFan @TRSx80 @TheSnowfield @Tonymac32 @ahoneybun @andyshrk @brentr @clee @hqnicolas @igorpecovnik @joekhoobyar @mlegenovic @paolosabatino @prahal @redrathnure @rpardini @sicXnull @torte71 @utlark
 sources/families/sm8250.conf		@FantasyGmm @amazingfate

.github/workflows/adjust-maintainers.yml

@@ -20,7 +20,7 @@ jobs:
     steps:
 
       - name: "Checkout build repo"
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           repository: armbian/build
           ref:  main

.github/workflows/labels-from-yml.yml

@@ -24,7 +24,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Run Labeler
         uses: crazy-max/ghaction-github-labeler@v5

.github/workflows/merge-announce.yml

@@ -9,7 +9,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Get repo
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           ref: ${{ github.event.pull_request.head.sha }}
       - name: Send push to Discord

.github/workflows/pr-announce.yml

@@ -14,7 +14,7 @@ jobs:
     if: ${{ github.repository == 'armbian/build' && github.event.label.id == '6210849975' }}
     steps:
       - name: Get repo
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           ref: ${{ github.event.pull_request.head.sha }}
       - name: Discord webhook

.github/workflows/pr-auto-labeler.yml

@@ -24,7 +24,7 @@ jobs:
 
     steps:
       - name: Checkout the pull request
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Check for label using GH CLI
         id: check
@@ -48,7 +48,7 @@ jobs:
 
     steps:
       # Checks out the repository to read files for matching with labeler config
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v5
 
       # Applies labels based on the .github/labeler.yml config
       - uses: actions/labeler@v5

.github/workflows/pr-kernel-security-analysis.yml

@@ -28,16 +28,16 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           fetch-depth: 0
 
       - name: Get changed files
         id: changed-files
-        uses: tj-actions/changed-files@055970845dd036d7345da7399b7e89f2e10f2b04 # v46.0.3
+        uses: tj-actions/changed-files@f963b3f3562b00b6d2dd25efc390eb04e51ef6c6 # v46.0.3
 
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           repository: a13xp0p0v/kconfig-hardened-check
           path: kconfig-hardened-check

.github/workflows/pr-lint-scripts.yml

@@ -24,13 +24,13 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           fetch-depth: 2
 
       - name: Get changed files
         id: changed-files
-        uses: tj-actions/changed-files@055970845dd036d7345da7399b7e89f2e10f2b04 # v46.0.3
+        uses: tj-actions/changed-files@f963b3f3562b00b6d2dd25efc390eb04e51ef6c6 # v46.0.3
 
       - name: List all changed files
         run: |

.github/workflows/scorecard.yml

@@ -28,7 +28,7 @@ jobs:
 
     steps:
       - name: "Checkout code"
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
         with:
           persist-credentials: false
 

.github/workflows/update-tools.yml

@@ -63,7 +63,7 @@ jobs:
 
     steps:
       - name: Checkout repository
-        uses: actions/checkout@v4
+        uses: actions/checkout@v5
 
       - name: Get current ${{ matrix.tool.PROJECT_NAME }} version
         id: get-version-current

VERSION

@@ -1 +1 @@
-25.08.0-trunk
+25.11.0-trunk

action.yml

@@ -115,7 +115,7 @@ runs:
         passphrase: ${{ inputs.armbian_pgp_password }}
 
     - name: "Checkout Armbian os"
-      uses: actions/checkout@v4
+      uses: actions/checkout@v5
       with:
         repository: armbian/os
         fetch-depth: 0
@@ -123,7 +123,7 @@ runs:
         path: os
 
     - name: "Checkout Armbian build framework"
-      uses: actions/checkout@v4
+      uses: actions/checkout@v5
       with:
         repository: armbian/build
         ref: ${{ inputs.armbian_branch }}
@@ -131,7 +131,7 @@ runs:
         path: build
 
     - name: "Checkout customisations"
-      uses: actions/checkout@v4
+      uses: actions/checkout@v5
       with:
         fetch-depth: 0
         clean: false

config/boards/bananapicm4io.conf

@@ -13,6 +13,11 @@ BOOT_FDT_FILE="amlogic/meson-g12b-bananapi-cm4-cm4io.dtb"
 BOOTBRANCH_BOARD="tag:v2025.01"
 BOOTPATCHDIR="v2025.01"
 
+# CPUFREQ (/etc/default/cpufrequtils)
+CPUMIN=1000000
+CPUMAX=2400000
+GOVERNOR=performance
+
 function post_family_tweaks_bsp__bananapi_rtl_bt() {
 	if [[ -d "$SRC/packages/bsp/bananapi/rtl_bt" ]]; then
 		mkdir -p "${destination}"/lib/firmware/updates/rtl_bt

config/boards/bananapif3.conf

@@ -2,16 +2,15 @@
 BOARD_NAME="BananaPi BPI-F3"
 BOARDFAMILY="spacemit"
 BOARD_MAINTAINER="pyavitz"
-KERNEL_TARGET="current"
+KERNEL_TARGET="current,edge"
 BOOT_FDT_FILE="spacemit/k1-bananapi-f3.dtb"
 BOOTDELAY=1
 SRC_EXTLINUX="yes"
-SRC_CMDLINE="earlycon=sbi console=tty1 console=ttyS0,115200"
+SRC_CMDLINE="earlycon=sbi console=tty1 console=ttyS0,115200 loglevel=1"
 PACKAGE_LIST_BOARD="rfkill bluetooth bluez bluez-tools"
 
 function post_config_uboot_target__extra_configs_for_bananapi_f3() {
 	display_alert "u-boot for ${BOARD}" "u-boot: enabling extra configs" "info"
-
 	run_host_command_logged scripts/config --enable CONFIG_SD_BOOT
 	run_host_command_logged scripts/config --enable CONFIG_EXT4_WRITE
 	run_host_command_logged scripts/config --enable CONFIG_FS_BTRFS
@@ -24,9 +23,7 @@ function post_family_tweaks_bsp__bananapi_f3_extras() {
 		display_alert "$BOARD" "Installing boot firmware" "info"
 		run_host_command_logged cp -fv $SRC/packages/blobs/riscv64/spacemit/esos.elf "${destination}"/lib/firmware
 	fi
-
 	display_alert "$BOARD" "Force load wireless" "info"
-
 	run_host_command_logged mkdir -pv "${destination}"/etc/modules-load.d
 	run_host_command_logged echo "8852bs" > "${destination}"/etc/modules-load.d/${BOARD}.conf
 }

config/boards/bananapim2s.conf

@@ -13,6 +13,11 @@ BOOT_FDT_FILE="amlogic/meson-g12b-a311d-bananapi-m2s.dtb"
 BOOTBRANCH_BOARD="tag:v2025.01"
 BOOTPATCHDIR="v2025.01"
 
+# CPUFREQ (/etc/default/cpufrequtils)
+CPUMIN=1000000
+CPUMAX=2400000
+GOVERNOR=performance
+
 function post_family_tweaks_bsp__bananapi_rtl_bt() {
 	if [[ -d "$SRC/packages/bsp/bananapi/rtl_bt" ]]; then
 		mkdir -p "${destination}"/lib/firmware/updates/rtl_bt

config/boards/bananapim4zero.conf

@@ -5,13 +5,14 @@ BOARD_MAINTAINER="pyavitz"
 BOOTCONFIG="bananapi_m4zero_defconfig"
 OVERLAY_PREFIX="sun50i-h616"
 BOOT_FDT_FILE="sun50i-h618-bananapi-m4-zero.dtb"
+DEFAULT_OVERLAYS="bananapi-m4-sdio-wifi-bt"
 BOOT_LOGO="desktop"
 KERNEL_TARGET="current,edge"
 KERNEL_TEST_TARGET="current"
 MODULES_BLACKLIST="rtw88_8821c rtw88_8821cu"
 FORCE_BOOTSCRIPT_UPDATE="yes"
-BOOTBRANCH_BOARD="tag:v2025.01"
-BOOTPATCHDIR="v2025.01"
+BOOTBRANCH_BOARD="tag:v2025.07"
+BOOTPATCHDIR="v2025.07"
 PACKAGE_LIST_BOARD="rfkill bluetooth bluez bluez-tools"
 
 function post_family_tweaks_bsp__bananapi_firmware() {

config/boards/bananapir4.csc

@@ -0,0 +1,18 @@
+# Mediatek MT7988a quad core Cortex-A73 4/8GB RAM 8GB EMMC mPci USB3.0 4xGBE
+BOARD_NAME="Banana Pi R4"
+BOARDFAMILY="filogic"
+BOARD_MAINTAINER=""
+KERNEL_TARGET="current"
+KERNEL_TEST_TARGET="current"
+BOOTCONFIG="mt7988a_bananapi_bpi-r4-sdmmc_defconfig"
+BOOT_FDT_FILE="mediatek/mt7988a-bananapi-bpi-r4-sd.dtb"
+SRC_EXTLINUX="yes"
+SRC_CMDLINE="console=ttyS0,115200n1 earlyprintk loglevel=8 initcall_debug=0 swiotlb=512 cgroup_enable cgroup_memory=1 init=/sbin/init"
+
+function post_family_tweaks__bpi-r4() {
+	display_alert "Applying eth blobs"
+	
+	mkdir -p "$SDCARD/lib/firmware/mediatek/mt7988"
+	cp -v "$SRC/packages/blobs/filogic/firmware/mediatek/mt7988/mt7988_wo_0.bin" "$SDCARD/lib/firmware/mediatek/mt7988/mt7988_wo_0.bin"
+	cp -v "$SRC/packages/blobs/filogic/firmware/mediatek/mt7988/mt7988_wo_1.bin" "$SDCARD/lib/firmware/mediatek/mt7988/mt7988_wo_1.bin"
+}

config/boards/core3566.csc

@@ -1,66 +0,0 @@
-# Rockchip RK3566 quad core 4/8GB RAM SoC WIFI/BT eMMC USB2 USB3 NVMe PCIe GbE HDMI SPI
-BOARD_NAME="core3566"
-BOARDFAMILY="rk35xx"
-BOARD_MAINTAINER=""
-BOOTCONFIG="orangepi-3b-rk3566_defconfig"
-BOOT_SOC="rk3566"
-KERNEL_TARGET="vendor"
-FULL_DESKTOP="yes"
-BOOT_LOGO="desktop"
-BOOT_FDT_FILE="rockchip/rk3566-core3566.dtb"
-IMAGE_PARTITION_TABLE="gpt"
-BOOT_SCENARIO="spl-blobs"
-BOOT_SUPPORT_SPI="yes"
-BOOT_SPI_RKSPI_LOADER="yes"
-MODULES=""
-MODULES_BLACKLIST_LEGACY="bcmdhd"
-
-# Override family config for this board; let's avoid conditionals in family config.
-function post_family_config__core3566_use_mainline_uboot() {
-	display_alert "$BOARD" "mainline (Kwiboo's tree) u-boot overrides" "info"
-
-	BOOTSOURCE="https://github.com/Kwiboo/u-boot-rockchip.git"
-	BOOTBRANCH="branch:rk3xxx-2024.04" # specific commit tested is commit:ccef7dfc453bc03c5b5c61fa67d2745b96fa7da6
-	BOOTPATCHDIR="v2024.04-orangepi3b" # empty, patches are already in Kwiboo's branch:rk3xxx-2024.04
-
-	BOOTDIR="u-boot-${BOARD}" # do not share u-boot directory
-
-	BOOTDELAY=1 # Wait for UART interrupt to enter UMS/RockUSB mode etc
-	UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin u-boot-rockchip-spi.bin u-boot.itb idbloader.img idbloader-spi.img"
-	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # disable stuff from rockchip64_common; we're using binman here which does all the work already
-
-	# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
-	function write_uboot_platform() {
-		dd if=${1}/u-boot-rockchip.bin of=${2} bs=32k seek=1 conv=fsync
-	}
-
-	# Smarter/faster/better to-spi writer using flashcp (hopefully with --partition), using the binman-provided 'u-boot-rockchip-spi.bin'
-	function write_uboot_platform_mtd() {
-		declare -a extra_opts_flashcp=("--verbose")
-		if flashcp -h | grep -q -e '--partition'; then
-			echo "Confirmed flashcp supports --partition -- read and write only changed blocks." >&2
-			extra_opts_flashcp+=("--partition")
-		else
-			echo "flashcp does not support --partition, will write full SPI flash blocks." >&2
-		fi
-		flashcp "${extra_opts_flashcp[@]}" "${1}/u-boot-rockchip-spi.bin" /dev/mtd0
-	}
-
-}
-
-function post_family_tweaks_bsp__core3566() {
-	# display_alert "$BOARD" "Installing sprd-bluetooth.service" "info"
-
-	# Bluetooth on core3566 board is handled by a Spreadtrum (sprd) chip and requires
-	# a custom hciattach_opi binary, plus a systemd service to run it at boot time
-	#install -m 755 $SRC/packages/bsp/rk3399/hciattach_opi $destination/usr/bin
-	# cp $SRC/packages/bsp/rk3399/sprd-bluetooth.service $destination/lib/systemd/system/
-
-	return 0
-}
-
-function post_family_tweaks__core3566_enable_services() {
-	# display_alert "$BOARD" "Enabling sprd-bluetooth.service" "info"
-	# chroot_sdcard systemctl enable sprd-bluetooth.service
-	return 0
-}

config/boards/kickpik2b.csc

@@ -0,0 +1,51 @@
+# Allwinner H618 quad core 1/2/4GB RAM SoC WiFi SPI USB-C
+BOARD_NAME="KickPi K2B"
+BOARDFAMILY="sun50iw9-bpi"
+BOARD_MAINTAINER="pyavitz"
+BOOTCONFIG="kickpi_k2b_defconfig"
+OVERLAY_PREFIX="sun50i-h616"
+BOOT_FDT_FILE="sun50i-h618-kickpi-k2b.dtb"
+BOOT_LOGO="desktop"
+KERNEL_TARGET="current,edge"
+KERNEL_TEST_TARGET="current"
+FORCE_BOOTSCRIPT_UPDATE="yes"
+BOOTBRANCH_BOARD="tag:v2025.07"
+BOOTPATCHDIR="v2025.07"
+PACKAGE_LIST_BOARD="rfkill bluetooth bluez bluez-tools"
+
+# AIC8800
+AIC8800_TYPE="sdio"
+enable_extension "radxa-aic8800"
+
+# AIC8800 Wireless
+function post_family_tweaks_bsp__aic8800_wireless() {
+	display_alert "$BOARD" "Installing AIC8800 Tweaks" "info"
+	mkdir -p "${destination}"/etc/modprobe.d
+	mkdir -p "${destination}"/etc/modules-load.d
+	# Add wireless conf
+	cat > "${destination}"/etc/modprobe.d/aic8800-wireless.conf <<- EOT
+	options aic8800_fdrv_sdio aicwf_dbg_level=0 custregd=0 ps_on=0
+	options aic8800_bsp_sdio aic_fw_path=/lib/firmware/aic8800_fw/SDIO/aic8800
+	EOT
+	# Add needed bluetooth modules
+	cat > "${destination}"/etc/modules-load.d/aic8800-btlpm.conf <<- EOT
+	hidp
+	rfcomm
+	bnep
+	aic8800_btlpm_sdio
+	EOT
+	# Add AIC8800 Bluetooth Service and Script
+	if [[ -d "$SRC/packages/bsp/aic8800" ]]; then
+		mkdir -p "${destination}"/etc/systemd/system
+		mkdir -p "${destination}"/usr/bin
+		cp -f "$SRC/packages/bsp/aic8800/aic-bluetooth" "${destination}"/usr/bin
+		chmod +x "${destination}"/usr/bin/aic-bluetooth
+		cp -f "$SRC/packages/bsp/aic8800/aic-bluetooth.service" "${destination}"/etc/systemd/system
+	fi
+}
+
+# Enable AIC8800 Bluetooth Service
+function post_family_tweaks__enable_aic8800_bluetooth_service() {
+	display_alert "$BOARD" "Enabling AIC8800 Bluetooth Service" "info"
+	chroot_sdcard systemctl --no-reload enable aic-bluetooth.service
+}

config/boards/lckfb-taishanpi.csc

@@ -2,20 +2,27 @@
 BOARD_NAME="LCKFB Taishan Pi"
 BOARDFAMILY="rk35xx"
 BOARD_MAINTAINER=""
-BOOTCONFIG="radxa-zero3-rk3566_defconfig"
-KERNEL_TARGET="vendor"
-BOOT_FDT_FILE="rockchip/rk3566-taishanpi-v10.dtb"
+BOOTCONFIG="lckfb-tspi-rk3566_defconfig"
+BOOT_SOC="rk3566"
+KERNEL_TARGET="vendor,current,edge"
+KERNEL_TEST_TARGET="current,vendor"
+BOOT_FDT_FILE="rockchip/rk3566-lckfb-tspi.dtb"
 BOOT_SCENARIO="spl-blobs"
 IMAGE_PARTITION_TABLE="gpt"
 
 # Override family config for this board; let's avoid conditionals in family config.
 function post_family_config__tspi_use_radxa_vendor() {
-	BOOTSOURCE='https://github.com/radxa/u-boot.git'
-	BOOTBRANCH='branch:rk35xx-2024.01'
-	BOOTPATCHDIR="u-boot-radxa-latest"
-	UBOOT_TARGET_MAP="BL31=$RKBIN_DIR/$BL31_BLOB ROCKCHIP_TPL=$RKBIN_DIR/$DDR_BLOB;;u-boot-rockchip.bin"
-	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd
+	display_alert "$BOARD" "Mainline U-Boot overrides for $BOARD - $BRANCH" "info"
+	BOOTDELAY=1
+	BOOTSOURCE="https://github.com/u-boot/u-boot"
+	BOOTBRANCH="tag:v2025.04"
+	BOOTPATCHDIR="v2025.04"
+	BOOTDIR="u-boot-${BOARD}" # do not share u-boot directory
+	UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin u-boot-rockchip-spi.bin"
+	unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # disable stuff from rockchip64_common; we're using binman here which does all the work already
+
+	# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
 	function write_uboot_platform() {
-		dd if=$1/u-boot-rockchip.bin of=$2 seek=64 conv=notrunc status=none
+		dd "if=$1/u-boot-rockchip.bin" "of=$2" bs=32k seek=1 conv=notrunc status=none
 	}
 }

config/boards/luckfox-core3566.csc

@@ -1,4 +1,4 @@
-# Rockchip RK3566 quad core
+# Rockchip RK3566 quad core 4/8GB RAM SoC WIFI/BT eMMC USB2 USB3 NVMe PCIe GbE HDMI SPI
 BOARD_NAME="Luckfox Core3566"
 BOARDFAMILY="rk35xx"
 BOARD_MAINTAINER=""
@@ -11,6 +11,9 @@ BOOT_FDT_FILE="rockchip/rk3566-luckfox-core3566.dtb"
 IMAGE_PARTITION_TABLE="gpt"
 BOOT_SCENARIO="spl-blobs"
 BOOTFS_TYPE="fat" # Only for vendor/legacy
+BOOT_SUPPORT_SPI="yes"
+BOOT_SPI_RKSPI_LOADER="yes"
+MODULES_BLACKLIST_LEGACY="bcmdhd"
 
 # Override family config for this board; let's avoid conditionals in family config.
 function post_family_config__luckfox-core3566_use_vendor_uboot() {

config/boards/mekotronics-r58-minipc.csc

@@ -1,7 +1,7 @@
 # Rockchip RK3588 SoC octa core 4-16GB SoC 1GBe eMMC USB3 SATA WiFi/BT
 declare -g BOARD_NAME="Mekotronics R58 MiniPC"
 declare -g BOARDFAMILY="rockchip-rk3588"
-declare -g BOARD_MAINTAINER="monkaBlyat"
+declare -g BOARD_MAINTAINER=""
 declare -g KERNEL_TARGET="vendor"
 declare -g BOOTCONFIG="mekotronics_r58-rk3588_defconfig"              # generic ebv-ish defconfig
 declare -g BOOT_FDT_FILE="rockchip/rk3588-blueberry-minipc-linux.dtb" # Specific to this board

config/boards/mekotronics-r58x-4g.csc

@@ -1,7 +1,7 @@
 # Rockchip RK3588 SoC octa core 4-16GB SoC 2x1GBe eMMC USB3 NVMe SATA 4G WiFi/BT HDMI DP HDMI-In RS232 RS485
 declare -g BOARD_NAME="Mekotronics R58X-4G"
 declare -g BOARDFAMILY="rockchip-rk3588"
-declare -g BOARD_MAINTAINER="monkaBlyat"
+declare -g BOARD_MAINTAINER=""
 declare -g KERNEL_TARGET="vendor"
 declare -g BOOTCONFIG="mekotronics_r58x-rk3588_defconfig"               # vendor u-boot; with NVMe and a DTS
 declare -g BOOT_FDT_FILE="rockchip/rk3588-blueberry-edge-v12-linux.dtb" # Specific to this board

config/boards/mekotronics-r58x.csc

@@ -1,7 +1,7 @@
 # Rockchip RK3588 SoC octa core 4-16GB SoC 2x1GBe eMMC USB3 NVMe SATA WiFi/BT HDMI DP HDMI-In RS232 RS485
 declare -g BOARD_NAME="Mekotronics R58X"
 declare -g BOARDFAMILY="rockchip-rk3588"
-declare -g BOARD_MAINTAINER="monkaBlyat"
+declare -g BOARD_MAINTAINER=""
 declare -g KERNEL_TARGET="vendor"
 declare -g BOOTCONFIG="mekotronics_r58x-rk3588_defconfig"               # vendor u-boot; with NVMe and a DTS
 declare -g BOOT_FDT_FILE="rockchip/rk3588-blueberry-edge-v10-linux.dtb" # Specific to this board

config/boards/nanopi-r6s.conf

@@ -28,9 +28,9 @@ function post_family_tweaks__nanopir6s_naming_udev_network_interfaces() {
 
 	mkdir -p $SDCARD/etc/udev/rules.d/
 	cat <<- EOF > "${SDCARD}/etc/udev/rules.d/70-persistent-net.rules"
-		SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", KERNELS=="fe1c0000.ethernet", NAME:="wan1"
-		SUBSYSTEM=="net", ACTION=="add", DRIVERS=="r8169", KERNELS=="0003:31:00.0", NAME:="lan1"
-		SUBSYSTEM=="net", ACTION=="add", DRIVERS=="r8169", KERNELS=="0004:41:00.0", NAME:="lan2"
+		SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", KERNELS=="fe1c0000.ethernet", NAME:="lan2"
+		SUBSYSTEM=="net", ACTION=="add", DRIVERS=="r8169", KERNELS=="0003:31:00.0", NAME:="wan"
+		SUBSYSTEM=="net", ACTION=="add", DRIVERS=="r8169", KERNELS=="0004:41:00.0", NAME:="lan1"
 	EOF
 }
 

config/boards/orangepi5pro.csc

@@ -54,8 +54,8 @@ function post_family_config_branch_edge__orangepi5pro_use_mainline_uboot() {
 	declare -g BOOTCONFIG="orangepi-5-pro-rk3588s_defconfig"
 	declare -g BOOTDELAY=1
 	declare -g BOOTSOURCE="https://github.com/u-boot/u-boot.git"
-	declare -g BOOTBRANCH="tag:v2024.04"
-	declare -g BOOTPATCHDIR="v2024.04"
+	declare -g BOOTBRANCH="tag:v2025.07"
+	declare -g BOOTPATCHDIR="v2025.07"
 	declare -g BOOTDIR="u-boot-${BOARD}"
 	declare -g UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin u-boot-rockchip-spi.bin"
 	declare -g INSTALL_HEADERS="yes"

config/boards/orangepizero.csc

@@ -11,7 +11,7 @@ HAS_VIDEO_OUTPUT="yes"
 SERIALCON="ttyS0,ttyGS0"
 KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
-CRUSTCONFIG="orangepi_zero_defconfig"
+# CRUSTCONFIG="orangepi_zero_defconfig" # Crust is failing https://github.com/armbian/build/issues/8197
 
 function orange_pi_zero_enable_xradio_workarounds() {
 	/usr/bin/systemctl enable xradio_unload.service

config/boards/qcom-robotics-rb5.conf

@@ -7,21 +7,21 @@ declare -g KERNEL_TEST_TARGET="edge"
 declare -g EXTRAWIFI="no"
 declare -g BOOTCONFIG="none"
 declare -g IMAGE_PARTITION_TABLE="gpt"
+# Reserve for ABL Boot
+# declare -g BOOTIMG_CMDLINE_EXTRA="clk_ignore_unused pd_ignore_unused console=tty0 console=ttyMSM0,1500000n8 pcie_pme=nomsi panic=30 allow_mismatched_32bit_el0 mem_sleep_default=s2idle"
 # declare -g -a ABL_DTB_LIST=("qrb5165-rb5")
 
 # Use the full firmware, complete linux-firmware plus Armbian's (for qcom/a650_sqe.fw)
 declare -g BOARD_FIRMWARE_INSTALL="-full"
 
 declare -g SERIALCON="${SERIALCON:-tty1}"
-declare -g GRUB_CMDLINE_LINUX_DEFAULT="clk_ignore_unused pd_ignore_unused arm64.nopauth efi=noruntime console=ttyMSM0,115200n8 pcie_pme=nomsi"
+declare -g GRUB_CMDLINE_LINUX_DEFAULT="clk_ignore_unused pd_ignore_unused console=tty0 arm64.nopauth efi=noruntime console=ttyMSM0,1500000n8 pcie_pme=nomsi panic=30 allow_mismatched_32bit_el0 mem_sleep_default=s2idle"
 declare -g BOOT_FDT_FILE="qcom/qrb5165-rb5.dtb"
-declare -g UEFI_PART_ALIGN="4096"
+declare -g SECTOR_SIZE="4096"
 enable_extension "grub"
 enable_extension "grub-with-dtb" # important, puts the whole DTB handling in place.
 
 function qcom-robotics-rb5_is_userspace_supported() {
-	[[ "${RELEASE}" == "bookworm" ]] && return 0
-	[[ "${RELEASE}" == "jammy" ]] && return 0
 	[[ "${RELEASE}" == "noble" ]] && return 0
 	[[ "${RELEASE}" == "trixie" ]] && return 0
 	return 1
@@ -37,11 +37,17 @@ function post_family_tweaks_bsp__qcom-robotics-rb5_add_services() {
 
 	display_alert "$BOARD" "Add services" "info"
 
-	# Bluetooth MAC addr setup service
+	# USB Gadget Network service
 	mkdir -p $destination/usr/local/bin/
 	mkdir -p $destination/usr/lib/systemd/system/
-	install -Dm655 $SRC/packages/bsp/generate-bt-mac-addr/bt-fixed-mac.sh $destination/usr/local/bin/
-	install -Dm644 $SRC/packages/bsp/generate-bt-mac-addr/bt-fixed-mac.service $destination/usr/lib/systemd/system/
+	mkdir -p $destination/etc/initramfs-tools/scripts/init-bottom/
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/setup-usbgadget-network.sh $destination/usr/local/bin/
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/remove-usbgadget-network.sh $destination/usr/local/bin/
+	install -Dm644 $SRC/packages/bsp/usb-gadget-network/usbgadget-rndis.service $destination/usr/lib/systemd/system/
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/usb-gadget-initramfs-hook $destination/etc/initramfs-tools/hooks/usb-gadget
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/usb-gadget-initramfs-premount $destination/etc/initramfs-tools/scripts/init-premount/usb-gadget
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/dropbear $destination/etc/initramfs-tools/scripts/init-premount/
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/kill-dropbear $destination/etc/initramfs-tools/scripts/init-bottom/
 }
 
 function post_family_tweaks__qcom-robotics-rb5_enable_services() {
@@ -53,8 +59,8 @@ function post_family_tweaks__qcom-robotics-rb5_enable_services() {
 	fi
 
 	display_alert "$BOARD" "Enable services" "info"
+	chroot_sdcard systemctl enable usbgadget-rndis.service
 
-	chroot_sdcard systemctl enable bt-fixed-mac.service
 	return 0
 }
 
@@ -66,33 +72,33 @@ function post_family_tweaks__qcom-robotics-rb5_extra_packages() {
 		return 0
 	fi
 
-	if [[ "${RELEASE}" == "jammy" ]] || [[ "${RELEASE}" == "noble" ]]; then
-		display_alert "Adding qcom-mainline PPA" "${BOARD}" "info"
+	if [[ "${RELEASE}" == "noble" ]]; then
+		do_with_retries 3 chroot_sdcard_apt_get_update
+		do_with_retries 3 chroot_sdcard_apt_get_install software-properties-common
+	fi
+
+	if [[ "${RELEASE}" == "noble" ]]; then
+		display_alert "Adding qcom-mainline PPA For" "${BOARD}" "info"
 		do_with_retries 3 chroot_sdcard add-apt-repository ppa:liujianfeng1994/qcom-mainline --yes --no-update
 	fi
 
-	if [[ "${RELEASE}" == "noble" ]]; then
-		display_alert "Adding Mesa PPA For Ubuntu " "${BOARD}" "info"
-		do_with_retries 3 chroot_sdcard add-apt-repository ppa:oibaf/graphics-drivers --yes --no-update
-	fi
-
+	# We need unudhcpd from armbian repo, so enable it
+	mv "${SDCARD}"/etc/apt/sources.list.d/armbian.sources.disabled "${SDCARD}"/etc/apt/sources.list.d/armbian.sources
 	do_with_retries 3 chroot_sdcard_apt_get_update
-	do_with_retries 3 chroot_sdcard_apt_get_install vulkan-tools mesa-vulkan-drivers btop mtools zstd
-
-	if [[ "${RELEASE}" == "noble" ]]; then
-		do_with_retries 3 chroot_sdcard_apt_get_install qbootctl
-	fi
+	display_alert "Installing ${BOARD} tweaks" "warn"
+	do_with_retries 3 chroot_sdcard_apt_get_install vulkan-tools mesa-vulkan-drivers mtools zstd alsa-ucm-conf qbootctl qrtr-tools unudhcpd
+	# disable armbian repo back
+	mv "${SDCARD}"/etc/apt/sources.list.d/armbian.sources "${SDCARD}"/etc/apt/sources.list.d/armbian.sources.disabled
 
 	if [[ "${DESKTOP_ENVIRONMENT}" == "kde-plasma" ]]; then
 		display_alert "Adding Extra KDE Package" "${BOARD}" "info"
-		do_with_retries 3 chroot_sdcard_apt_get_install plasma-workspace-wayland plasma-desktop plasma-systemmonitor plasma-nm kde-standard kde-spectacle kinfocenter kscreen krfb kfind filelight \
-		dolphin clinfo vulkan-tools wayland-utils
+		do_with_retries 3 chroot_sdcard_apt_get_install plasma-workspace plasma-desktop plasma-systemmonitor plasma-nm kde-standard kde-spectacle kinfocenter kscreen krfb kfind filelight \
+		dolphin clinfo wayland-utils
 	fi
 
 	if [[ "${RELEASE}" == "noble" ]]; then
 		chroot_sdcard systemctl enable qbootctl.service
 	fi
-	chroot_sdcard systemctl enable bt-fixed-mac.service
 
 	# No driver support for suspend
 	chroot_sdcard systemctl mask suspend.target

config/boards/radxa-cubie-a5e.csc

@@ -2,10 +2,10 @@
 BOARD_NAME="radxa cubie a5e"
 BOARDFAMILY="sun55iw3"
 BOARD_MAINTAINER=""
-BOOTCONFIG="radxa-a5e_defconfig"
+BOOTCONFIG="radxa-cubie-a5e_defconfig"
 OVERLAY_PREFIX="sun55i-a527"
 #BOOT_LOGO="desktop"
-KERNEL_TARGET="dev"
+KERNEL_TARGET="edge"
 BOOT_FDT_FILE="dtb/allwinner/sun55i-a527-radxa-a5e.dtb"
 IMAGE_PARTITION_TABLE="gpt"
 #IMAGE_PARTITION_TABLE="msdos"
@@ -14,9 +14,42 @@ BOOTSTART="1"
 BOOTSIZE="512"
 ROOTSTART="513"
 
-function post_family_tweaks__radxa_cubie-a5e() {
-	display_alert "Applying wifi firmware"
-	pushd "$SDCARD/lib/firmware"
-	ln -s "aic8800/SDIO/aic8800D80" "aic8800_sdio" # use armbian-firmware
-	popd
+PACKAGE_LIST_BOARD="rfkill bluetooth bluez bluez-tools"
+
+# AIC8800
+AIC8800_TYPE="sdio"
+enable_extension "radxa-aic8800"
+
+# AIC8800 Wireless
+function post_family_tweaks_bsp__aic8800_wireless() {
+	display_alert "$BOARD" "Installing AIC8800 Tweaks" "info"
+	mkdir -p "${destination}"/etc/modprobe.d
+	mkdir -p "${destination}"/etc/modules-load.d
+	# Add wireless conf
+	cat > "${destination}"/etc/modprobe.d/aic8800-wireless.conf <<- EOT
+	options aic8800_fdrv_sdio aicwf_dbg_level=0 custregd=0 ps_on=0
+	#options aic8800_bsp_sdio aic_fw_path=/lib/firmware/aic8800_fw/SDIO/aic8800
+	EOT
+	# Add needed bluetooth modules
+	cat > "${destination}"/etc/modules-load.d/aic8800-btlpm.conf <<- EOT
+	hidp
+	rfcomm
+	bnep
+	aic8800_btlpm_sdio
+	EOT
+	# Add AIC8800 Bluetooth Service and Script
+	if [[ -d "$SRC/packages/bsp/aic8800" ]]; then
+		mkdir -p "${destination}"/etc/systemd/system
+		mkdir -p "${destination}"/usr/bin
+		cp -f "$SRC/packages/bsp/aic8800/aic-bluetooth" "${destination}"/usr/bin
+		chmod +x "${destination}"/usr/bin/aic-bluetooth
+		cp -f "$SRC/packages/bsp/aic8800/aic-bluetooth.service" "${destination}"/etc/systemd/system
+	fi
 }
+
+# Enable AIC8800 Bluetooth Service
+function post_family_tweaks__enable_aic8800_bluetooth_service() {
+	display_alert "$BOARD" "Enabling AIC8800 Bluetooth Service" "info"
+	chroot_sdcard systemctl --no-reload enable aic-bluetooth.service
+}
+

config/boards/radxa-zero2.csc

@@ -1,7 +1,7 @@
 # Amlogic A311D 4GB RAM eMMC USB3 WiFi BT
 BOARD_NAME="Radxa Zero 2"
 BOARDFAMILY="meson-g12b"
-BOARD_MAINTAINER="monkaBlyat"
+BOARD_MAINTAINER=""
 BOOTCONFIG="radxa-zero2_config"
 KERNEL_TARGET="current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/rock-4se.csc

@@ -10,11 +10,5 @@ KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"
 BOOT_FDT_FILE="rockchip/rk3399-rock-4se.dtb"
-BOOT_SCENARIO="spl-blobs"
+BOOT_SCENARIO="binman-atf-mainline"
 BOOT_SUPPORT_SPI="yes"
-BL31_BLOB="rk33/rk3399_bl31_v1.36.elf"
-DDR_BLOB="rk33/rk3399_ddr_933MHz_v1.30.bin"
-
-function post_family_config___mainline_uboot() {
-	declare -g UBOOT_TARGET_MAP="ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB} BL31=$RKBIN_DIR/$BL31_BLOB spl/u-boot-spl u-boot.bin flash.bin;;idbloader.img u-boot.itb"
-}

config/boards/rock-5-cm-rpi-cm4-io.csc

@@ -8,6 +8,7 @@ KERNEL_TARGET="vendor"
 FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"
 BOOT_FDT_FILE="rockchip/rk3588s-radxa-cm5-rpi-cm4-io.dtb"
+BOOTPATCHDIR="legacy/u-boot-radxa-rk35xx/board_rock-5-cm-rpi-cm4-io"
 BOOT_SCENARIO="spl-blobs"
 BOOT_SUPPORT_SPI="yes"
 BOOT_SPI_RKSPI_LOADER="yes"

config/boards/rock-5-cmio.csc

@@ -8,6 +8,7 @@ KERNEL_TARGET="vendor"
 FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"
 BOOT_FDT_FILE="rockchip/rk3588s-radxa-cm5-io.dtb"
+BOOTPATCHDIR="legacy/u-boot-radxa-rk35xx/board_rock-5-cmio"
 BOOT_SCENARIO="spl-blobs"
 BOOT_SUPPORT_SPI="yes"
 BOOT_SPI_RKSPI_LOADER="yes"

config/boards/rockpi-4cplus.csc

@@ -10,7 +10,7 @@ BOOT_LOGO="desktop"
 BOOTBRANCH_BOARD="tag:v2024.01"
 BOOTPATCHDIR="v2024.01"
 BOOTCONFIG="rock-4c-plus-rk3399_defconfig"
-BOOT_SCENARIO="spl-blobs"
+BOOT_SCENARIO="binman-atf-mainline"
 BOOT_SUPPORT_SPI=yes
 
 DDR_BLOB="rk33/rk3399_ddr_933MHz_v1.30.bin"

config/boards/station-m3.csc

@@ -2,8 +2,9 @@
 BOARD_NAME="Station M3"
 BOARDFAMILY="rockchip-rk3588"
 BOARD_MAINTAINER="chainsx"
-KERNEL_TARGET="vendor"
-BOOTCONFIG="rock-5a-rk3588s_defconfig"
+KERNEL_TARGET="vendor,current"
+KERNEL_TEST_TARGET="vendor"
+BOOTCONFIG="roc-pc-rk3588s_defconfig"
 FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"
 BOOT_FDT_FILE="rockchip/rk3588s-roc-pc.dtb"

config/boards/uefi-loong64.conf

@@ -0,0 +1,6 @@
+# loong64 via UEFI for all UEFI-enabled boards
+export BOARD_NAME="UEFI loong64"
+export BOARDFAMILY="uefi-loong64"
+export KERNEL_TARGET="current,edge"
+export SERIALCON="ttyS0,115200"
+ENABLE_EXTENSIONS="yt6801"

config/desktop/common/environments/cinnamon/config_base/packages

@@ -1,5 +1,4 @@
 anacron
-apt-xapian-index
 blueman
 bluez
 bluez-cups

config/desktop/common/environments/gnome/config_base/packages

@@ -1,5 +1,4 @@
 anacron
-apt-xapian-index
 at-spi2-core
 colord
 cups

config/desktop/common/environments/i3-wm/config_base/packages

@@ -1,6 +1,5 @@
 anacron
 apport-gtk
-apt-xapian-index
 arandr
 blueman
 bluez

config/desktop/common/environments/mate/config_base/packages

@@ -86,7 +86,7 @@ lightdm
 lightdm-settings
 lxtask
 mate-accessibility-profiles
-mate-applet-appmenu
+#mate-applet-appmenu
 mate-applet-brisk-menu
 mate-applets
 mate-applets-common
@@ -128,7 +128,7 @@ mate-sensors-applet-common
 mate-session-manager
 mate-settings-daemon
 mate-settings-daemon-common
-mate-sntray-plugin
+#mate-sntray-plugin
 mate-system-monitor
 mate-system-monitor-common
 mate-terminal

config/desktop/common/environments/xfce/config_base/packages

@@ -1,5 +1,4 @@
 anacron
-apt-xapian-index
 blueman
 bluez
 bluez-cups

config/desktop/plucky/environments/kde-plasma

@@ -1 +0,0 @@
-../../jammy/environments/kde-plasma

config/desktop/plucky/environments/kde-plasma/architectures

@@ -0,0 +1 @@
+../../../jammy/environments/kde-plasma/architectures

config/desktop/plucky/environments/kde-plasma/armbian

@@ -0,0 +1 @@
+../../../jammy/environments/kde-plasma/armbian

config/desktop/plucky/environments/kde-plasma/config_base/packages

@@ -0,0 +1,153 @@
+anacron
+apport-gtk
+blueman
+bluez
+bluez-cups
+bluez-tools
+brltty
+brltty-x11
+cifs-utils
+colord
+cups
+cups-bsd
+cups-client
+cups-filters
+dbus-x11
+dictionaries-common
+doc-base
+evince
+evince-common
+fontconfig
+fontconfig-config
+fonts-arphic-ukai
+fonts-arphic-uming
+fonts-dejavu-core
+fonts-freefont-ttf
+fonts-guru
+fonts-guru-extra
+fonts-khmeros-core
+fonts-liberation
+fonts-nanum
+fonts-opensymbol
+fonts-stix
+fonts-symbola
+fonts-ubuntu
+fonts-ubuntu-console
+foomatic-db-compressed-ppds
+gdebi
+ghostscript-x
+gist
+gnome-disk-utility
+gnome-screenshot
+gnome-user-docs-de
+gnome-user-docs-es
+gnome-user-docs-it
+gnome-user-docs-pt
+gnome-user-docs-ru
+gnome-user-docs-sl
+gstreamer1.0-packagekit
+gstreamer1.0-plugins-base-apps
+gstreamer1.0-pulseaudio
+gtk2-engines
+gtk2-engines-murrine
+gtk2-engines-pixbuf
+gvfs-backends
+hplip
+indicator-printers
+inputattach
+inxi
+kde-plasma-desktop
+keyutils
+kwin-x11
+language-pack-gnome-de
+language-pack-gnome-en
+language-pack-gnome-es
+language-pack-gnome-fr
+language-pack-gnome-it
+language-pack-gnome-pt
+language-pack-gnome-ru
+language-pack-gnome-sl
+laptop-detect
+libatk-adaptor
+libcvc0
+libfont-afm-perl
+libfontconfig1
+libfontenc1
+libgail-common
+libgl1-mesa-dri
+libgsettings-qt1
+libgtk2.0-bin
+libnotify-bin
+libproxy1-plugin-gsettings
+libu2f-udev
+libwmf0.2-7-gtk
+libxcursor1
+sddm
+mesa-utils
+mousepad
+mousetweaks
+numix-gtk-theme
+numix-icon-theme
+numix-icon-theme-circle
+openprinting-ppds
+p7zip-full
+pamix
+pasystray
+pavucontrol
+pavucontrol-qt
+pkexec
+polkitd
+policykit-desktop-privileges
+printer-driver-all
+profile-sync-daemon
+pulseaudio-module-bluetooth
+plasma-workspace
+redshift
+samba
+smbclient
+software-properties-gtk
+spice-vdagent
+systemsettings
+system-config-printer
+system-config-printer-common
+terminator
+tracker
+tracker-extract
+tracker-miner-fs
+tree
+ubuntu-drivers-common
+update-inetd
+update-manager
+update-manager-core
+update-notifier
+update-notifier-common
+viewnior
+wamerican
+wbrazilian
+wbritish
+wfrench
+witalian
+wportuguese
+wspanish
+wswiss
+x11-apps
+x11-utils
+x11-xserver-utils
+xapps-common
+xarchiver
+xbacklight
+xcursor-themes
+xdg-user-dirs
+xdg-user-dirs-gtk
+xfonts-100dpi
+xfonts-75dpi
+xfonts-base
+xfonts-encodings
+xfonts-scalable
+xfonts-utils
+xorg-docs-core
+xscreensaver
+xserver-xorg
+xserver-xorg-video-fbdev
+xauth
+xwallpaper

config/desktop/plucky/environments/kde-plasma/config_base/packages.uninstall

@@ -0,0 +1,2 @@
+gnome-software
+gnome-keyring

config/desktop/plucky/environments/kde-plasma/debian

@@ -0,0 +1 @@
+../../../jammy/environments/kde-plasma/debian

config/desktop/plucky/environments/kde-plasma/support

@@ -0,0 +1 @@
+../../../jammy/environments/kde-plasma/support

config/desktop/sid/environments/xfce/config_base/packages

@@ -1,5 +1,4 @@
 anacron
-apt-xapian-index
 blueman
 bluez
 bluez-cups

config/desktop/trixie/environments/budgie/config_base/packages

@@ -104,7 +104,6 @@ pamix
 pasystray
 pavucontrol
 pavucontrol-qt
-pavumeter
 plank
 polkitd
 pkexec

config/desktop/trixie/environments/i3-wm/config_base/packages

@@ -89,7 +89,6 @@ pamix
 pasystray
 pavucontrol
 pavucontrol-qt
-pavumeter
 polkitd
 pkexec
 #printer-driver-all

config/desktop/trixie/environments/kde-plasma/config_base/packages

@@ -75,7 +75,6 @@ pamix
 pasystray
 pavucontrol
 pavucontrol-qt
-pavumeter
 pkexec
 plasma-discover
 polkitd

config/desktop/trixie/environments/mate/config_base/packages

@@ -59,7 +59,7 @@ mate-sensors-applet-common
 mate-session-manager
 mate-settings-daemon
 mate-settings-daemon-common
-mate-sntray-plugin
+#mate-sntray-plugin
 mate-system-monitor
 mate-system-monitor-common
 mate-terminal
@@ -83,7 +83,6 @@ p7zip-full
 pamix
 pasystray
 pavucontrol
-pavumeter
 polkitd
 pkexec
 printer-driver-all

config/desktop/trixie/environments/xmonad/config_base/packages

@@ -1,6 +1,7 @@
 anacron
 apt-config-auto-update
 arandr
+ayatana-indicator-bluetooth
 blueman
 bluez
 bluez-cups
@@ -37,7 +38,7 @@ fonts-ubuntu
 fonts-ubuntu-console
 foomatic-db-compressed-ppds
 ghostscript-x
-gnome-bluetooth
+gnome-bluetooth-sendto
 gnome-disk-utility
 gnome-font-viewer
 gist
@@ -58,7 +59,6 @@ libfontenc1
 libgail-common
 libghc-xmonad-contrib-dev
 libghc-xmonad-wallpaper-dev
-libgnome-bluetooth13
 libgsettings-qt1
 libnotify-bin
 libproxy1-plugin-gsettings
@@ -79,7 +79,6 @@ pamix
 pasystray
 pavucontrol
 pavucontrol-qt
-pavumeter
 polkitd
 pkexec
 printer-driver-all

config/distributions/sid/architectures

@@ -1 +1 @@
-arm64,armhf,riscv64,amd64
+arm64,armhf,riscv64,amd64,loong64

config/distributions/trixie/support

@@ -1 +1 @@
-csc
+supported

config/kernel/linux-filogic-current.config

@@ -0,0 +1,642 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_BPF_JIT=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+# CONFIG_CPU_ISOLATION is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
+CONFIG_MEMCG=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_RDMA=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_BPF=y
+CONFIG_NAMESPACES=y
+# CONFIG_TIME_NS is not set
+CONFIG_USER_NS=y
+CONFIG_BLK_DEV_INITRD=y
+# CONFIG_INITRAMFS_PRESERVE_MTIME is not set
+CONFIG_EXPERT=y
+# CONFIG_SYSFS_SYSCALL is not set
+# CONFIG_RSEQ is not set
+# CONFIG_CACHESTAT_SYSCALL is not set
+CONFIG_ARCH_MEDIATEK=y
+# CONFIG_AMPERE_ERRATUM_AC03_CPU_38 is not set
+# CONFIG_ARM64_ERRATUM_826319 is not set
+# CONFIG_ARM64_ERRATUM_827319 is not set
+# CONFIG_ARM64_ERRATUM_824069 is not set
+# CONFIG_ARM64_ERRATUM_819472 is not set
+# CONFIG_ARM64_ERRATUM_832075 is not set
+# CONFIG_ARM64_ERRATUM_1024718 is not set
+# CONFIG_ARM64_ERRATUM_1165522 is not set
+# CONFIG_ARM64_ERRATUM_1319367 is not set
+# CONFIG_ARM64_ERRATUM_1530923 is not set
+# CONFIG_ARM64_ERRATUM_1463225 is not set
+# CONFIG_ARM64_ERRATUM_1508412 is not set
+# CONFIG_ARM64_ERRATUM_2051678 is not set
+# CONFIG_ARM64_ERRATUM_2077057 is not set
+# CONFIG_ARM64_ERRATUM_2658417 is not set
+# CONFIG_ARM64_ERRATUM_2054223 is not set
+# CONFIG_ARM64_ERRATUM_2067961 is not set
+# CONFIG_ARM64_ERRATUM_2645198 is not set
+# CONFIG_ARM64_ERRATUM_2966298 is not set
+# CONFIG_ARM64_ERRATUM_3117295 is not set
+# CONFIG_ARM64_ERRATUM_3194386 is not set
+# CONFIG_CAVIUM_ERRATUM_22375 is not set
+# CONFIG_CAVIUM_ERRATUM_23154 is not set
+# CONFIG_CAVIUM_ERRATUM_27456 is not set
+# CONFIG_CAVIUM_ERRATUM_30115 is not set
+# CONFIG_CAVIUM_TX2_ERRATUM_219 is not set
+# CONFIG_FUJITSU_ERRATUM_010001 is not set
+# CONFIG_HISILICON_ERRATUM_161600802 is not set
+# CONFIG_HISILICON_ERRATUM_162100801 is not set
+# CONFIG_QCOM_FALKOR_ERRATUM_1003 is not set
+# CONFIG_QCOM_FALKOR_ERRATUM_1009 is not set
+# CONFIG_QCOM_QDF2400_ERRATUM_0065 is not set
+# CONFIG_QCOM_FALKOR_ERRATUM_E1041 is not set
+# CONFIG_NVIDIA_CARMEL_CNP_ERRATUM is not set
+# CONFIG_ROCKCHIP_ERRATUM_3588001 is not set
+# CONFIG_SOCIONEXT_SYNQUACER_PREITS is not set
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_SCHED_MC=y
+CONFIG_NR_CPUS=4
+CONFIG_HZ_100=y
+# CONFIG_UNMAP_KERNEL_AT_EL0 is not set
+CONFIG_ARM64_SW_TTBR0_PAN=y
+# CONFIG_ARM64_HW_AFDBM is not set
+# CONFIG_ARM64_USE_LSE_ATOMICS is not set
+# CONFIG_ARM64_RAS_EXTN is not set
+# CONFIG_ARM64_PTR_AUTH is not set
+# CONFIG_ARM64_AMU_EXTN is not set
+# CONFIG_ARM64_TLB_RANGE is not set
+# CONFIG_ARM64_BTI is not set
+# CONFIG_ARM64_E0PD is not set
+# CONFIG_ARM64_MTE is not set
+# CONFIG_ARM64_EPAN is not set
+# CONFIG_ARM64_POE is not set
+# CONFIG_ARM64_SVE is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_CMDLINE_OVERRIDE=y
+# CONFIG_SUSPEND is not set
+CONFIG_PM=y
+CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_PSCI_CPUIDLE=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_ARM_MEDIATEK_CPUFREQ=y
+# CONFIG_ARM_MEDIATEK_CPUFREQ_HW is not set
+CONFIG_JUMP_LABEL=y
+# CONFIG_STACKPROTECTOR_STRONG is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
+CONFIG_BLK_DEV_THROTTLING=y
+# CONFIG_BLK_DEBUG_FS is not set
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_MQ_IOSCHED_DEADLINE is not set
+# CONFIG_MQ_IOSCHED_KYBER is not set
+# CONFIG_IOSCHED_BFQ is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_ZSWAP=y
+CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
+CONFIG_SLAB_FREELIST_RANDOM=y
+CONFIG_SLAB_FREELIST_HARDENED=y
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_SECRETMEM is not set
+CONFIG_LRU_GEN=y
+CONFIG_LRU_GEN_ENABLED=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_INET_ESP=m
+# CONFIG_INET_DIAG is not set
+CONFIG_TCP_CONG_ADVANCED=y
+# CONFIG_TCP_CONG_BIC is not set
+# CONFIG_TCP_CONG_WESTWOOD is not set
+# CONFIG_TCP_CONG_HTCP is not set
+# CONFIG_IPV6_SIT is not set
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_IPV6_SEG6_LWTUNNEL=y
+CONFIG_MPTCP=y
+CONFIG_NETFILTER=y
+CONFIG_BRIDGE_NETFILTER=m
+# CONFIG_NETFILTER_EGRESS is not set
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CONNTRACK_PROCFS=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_LABELS=y
+# CONFIG_NF_CT_PROTO_DCCP is not set
+# CONFIG_NF_CT_PROTO_SCTP is not set
+# CONFIG_NF_CT_PROTO_UDPLITE is not set
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_TABLES=y
+CONFIG_NF_TABLES_INET=y
+CONFIG_NF_TABLES_NETDEV=y
+CONFIG_NFT_NUMGEN=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_FLOW_OFFLOAD=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_MASQ=m
+CONFIG_NFT_REDIR=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_TUNNEL=m
+CONFIG_NFT_QUOTA=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_FIB_INET=m
+CONFIG_NFT_XFRM=m
+CONFIG_NFT_SOCKET=m
+CONFIG_NFT_TPROXY=m
+CONFIG_NFT_SYNPROXY=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
+CONFIG_NFT_REJECT_NETDEV=m
+CONFIG_NF_FLOW_TABLE_INET=m
+CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_NFT_FIB_IPV4=m
+CONFIG_NF_TABLES_ARP=y
+CONFIG_NF_LOG_IPV4=m
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_RAW=m
+CONFIG_NFT_FIB_IPV6=m
+CONFIG_NF_LOG_IPV6=m
+CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_BRIDGE=y
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_NET_DSA=y
+CONFIG_VLAN_8021Q=y
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_FQ_CODEL=y
+CONFIG_NET_SCH_INGRESS=m
+CONFIG_NET_SCH_DEFAULT=y
+CONFIG_DEFAULT_FQ_CODEL=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=m
+CONFIG_NET_CLS_BPF=m
+CONFIG_NET_CLS_FLOWER=m
+CONFIG_NET_CLS_MATCHALL=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_VLAN=m
+CONFIG_NET_ACT_BPF=m
+CONFIG_CGROUP_NET_PRIO=y
+CONFIG_BT=y
+CONFIG_CFG80211=m
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_MESH=y
+CONFIG_MAC80211_LEDS=y
+CONFIG_RFKILL_FULL=y
+CONFIG_RFKILL_GPIO=y
+# CONFIG_LWTUNNEL_BPF is not set
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEASPM_PERFORMANCE=y
+CONFIG_PCI_DEBUG=y
+# CONFIG_VGA_ARB is not set
+CONFIG_PCIE_MEDIATEK_GEN3=y
+CONFIG_UEVENT_HELPER=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER_USER_HELPER=y
+CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
+# CONFIG_ARM_SMCCC_SOC_ID is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARSER_TRX=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_NAND_MTK=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_MTD_NAND_ECC_MEDIATEK=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_FASTMAP=y
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_MTD_UBI_NVMEM=y
+CONFIG_OF_OVERLAY=y
+CONFIG_ZRAM=y
+CONFIG_ZRAM_BACKEND_LZ4=y
+CONFIG_ZRAM_BACKEND_LZ4HC=y
+CONFIG_ZRAM_BACKEND_ZSTD=y
+CONFIG_ZRAM_BACKEND_DEFLATE=y
+CONFIG_ZRAM_BACKEND_842=y
+CONFIG_ZRAM_BACKEND_LZO=y
+CONFIG_ZRAM_DEF_COMP_ZSTD=y
+CONFIG_ZRAM_WRITEBACK=y
+CONFIG_ZRAM_MEMORY_TRACKING=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_NVME=y
+CONFIG_EEPROM_AT24=m
+CONFIG_BLK_DEV_SD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_ATA=y
+# CONFIG_ATA_VERBOSE_ERROR is not set
+# CONFIG_ATA_FORCE is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_MACVLAN=m
+CONFIG_IPVLAN=m
+CONFIG_VXLAN=m
+CONFIG_VETH=m
+CONFIG_NETKIT=y
+CONFIG_NET_DSA_AN8855=y
+CONFIG_NET_DSA_MT7530=y
+# CONFIG_NET_VENDOR_ASIX is not set
+# CONFIG_NET_VENDOR_ENGLEDER is not set
+# CONFIG_NET_VENDOR_FUNGIBLE is not set
+# CONFIG_NET_VENDOR_LITEX is not set
+CONFIG_NET_VENDOR_MEDIATEK=y
+CONFIG_NET_MEDIATEK_SOC=y
+# CONFIG_NET_VENDOR_MICROSOFT is not set
+# CONFIG_NET_VENDOR_VERTEXCOM is not set
+# CONFIG_NET_VENDOR_WANGXUN is not set
+CONFIG_SFP=m
+CONFIG_AIROHA_EN8801SC_PHY=y
+CONFIG_AIR_AN8855_PHY=y
+CONFIG_AQUANTIA_PHY=m
+CONFIG_ICPLUS_PHY=y
+CONFIG_MAXLINEAR_GPHY=y
+CONFIG_MEDIATEK_2P5GE_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_MDIO_AN8855=y
+CONFIG_PPP=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+# CONFIG_WLAN_VENDOR_ADMTEK is not set
+# CONFIG_WLAN_VENDOR_ATH is not set
+CONFIG_AT76C50X_USB=m
+# CONFIG_WLAN_VENDOR_BROADCOM is not set
+# CONFIG_WLAN_VENDOR_INTEL is not set
+# CONFIG_WLAN_VENDOR_INTERSIL is not set
+# CONFIG_WLAN_VENDOR_MARVELL is not set
+CONFIG_MT7601U=m
+CONFIG_MT76x0U=m
+CONFIG_MT76x2U=m
+CONFIG_MT7663U=m
+CONFIG_MT7915E=m
+CONFIG_MT7921E=m
+CONFIG_MT7921U=m
+CONFIG_MT7996E=m
+CONFIG_MT7925E=m
+CONFIG_MT7925U=m
+# CONFIG_WLAN_VENDOR_MICROCHIP is not set
+# CONFIG_WLAN_VENDOR_PURELIFI is not set
+# CONFIG_WLAN_VENDOR_RALINK is not set
+CONFIG_RTL8XXXU=m
+CONFIG_RTW88=m
+CONFIG_RTW88_8822BE=m
+CONFIG_RTW88_8822BU=m
+CONFIG_RTW88_8822CE=m
+CONFIG_RTW88_8822CU=m
+CONFIG_RTW88_8723DU=m
+CONFIG_RTW88_8821CE=m
+CONFIG_RTW88_8821CU=m
+CONFIG_RTW89=m
+CONFIG_RTW89_8852AE=m
+CONFIG_RTW89_8852BE=m
+CONFIG_RTW89_8852CE=m
+CONFIG_RTW89_8922AE=m
+# CONFIG_WLAN_VENDOR_RSI is not set
+# CONFIG_WLAN_VENDOR_SILABS is not set
+# CONFIG_WLAN_VENDOR_ST is not set
+# CONFIG_WLAN_VENDOR_TI is not set
+CONFIG_RTL8822BU=m
+CONFIG_RTL8821CU=m
+# CONFIG_WLAN_VENDOR_ZYDAS is not set
+# CONFIG_WLAN_VENDOR_QUANTENNA is not set
+CONFIG_ISDN=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_LEGACY_TIOCSTI is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_EXAR is not set
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+CONFIG_SERIAL_8250_MT6577=y
+# CONFIG_SERIAL_8250_PERICOM is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_ARM_SMCCC_TRNG is not set
+# CONFIG_DEVMEM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=m
+CONFIG_I2C_MUX_PCA954x=m
+# CONFIG_I2C_HELPER_AUTO is not set
+CONFIG_I2C_MT65XX=y
+CONFIG_SPI=y
+CONFIG_SPI_MT65XX=y
+CONFIG_SPI_MTK_SNFI=y
+# CONFIG_PTP_1588_CLOCK is not set
+# CONFIG_PINCTRL_MT2712 is not set
+# CONFIG_PINCTRL_MT6765 is not set
+# CONFIG_PINCTRL_MT6779 is not set
+# CONFIG_PINCTRL_MT6795 is not set
+# CONFIG_PINCTRL_MT6797 is not set
+# CONFIG_PINCTRL_MT7622 is not set
+# CONFIG_PINCTRL_MT8167 is not set
+# CONFIG_PINCTRL_MT8173 is not set
+# CONFIG_PINCTRL_MT8183 is not set
+# CONFIG_PINCTRL_MT8186 is not set
+# CONFIG_PINCTRL_MT8188 is not set
+# CONFIG_PINCTRL_MT8192 is not set
+# CONFIG_PINCTRL_MT8195 is not set
+# CONFIG_PINCTRL_MT8365 is not set
+# CONFIG_PINCTRL_MT8516 is not set
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GPIO_CDEV_V1 is not set
+CONFIG_POWER_RESET_SYSCON=y
+# CONFIG_POWER_SUPPLY_HWMON is not set
+CONFIG_SENSORS_PWM_FAN=m
+CONFIG_THERMAL=y
+CONFIG_THERMAL_GOV_FAIR_SHARE=y
+CONFIG_THERMAL_GOV_BANG_BANG=y
+CONFIG_THERMAL_GOV_USER_SPACE=y
+CONFIG_CPU_THERMAL=y
+# CONFIG_CPU_FREQ_THERMAL is not set
+CONFIG_MTK_THERMAL=y
+CONFIG_MTK_SOC_THERMAL=y
+CONFIG_MTK_LVTS_THERMAL=y
+CONFIG_MTK_LVTS_THERMAL_DEBUGFS=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_SYSFS=y
+CONFIG_WATCHDOG_PRETIMEOUT_GOV=y
+# CONFIG_WATCHDOG_PRETIMEOUT_GOV_NOOP is not set
+CONFIG_GPIO_WATCHDOG=y
+CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
+CONFIG_MFD_AIROHA_AN8855=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_MT6380=y
+CONFIG_REGULATOR_RT5190A=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_USB=m
+CONFIG_USB_XHCI_HCD=m
+CONFIG_USB_XHCI_PLATFORM=m
+CONFIG_USB_XHCI_MTK=m
+CONFIG_USB_STORAGE=m
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
+CONFIG_USB_STORAGE_USBAT=m
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
+CONFIG_USB_STORAGE_ALAUDA=m
+CONFIG_USB_STORAGE_KARMA=m
+CONFIG_USB_STORAGE_CYPRESS_ATACB=m
+CONFIG_USB_UAS=m
+CONFIG_MMC=y
+CONFIG_MMC_MTK=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_MULTICOLOR=y
+CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_SMARTRG_LED=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_NETDEV=y
+CONFIG_LEDS_TRIGGER_PATTERN=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_NVMEM is not set
+CONFIG_RTC_DRV_PCF8563=m
+CONFIG_RTC_DRV_MT7622=y
+CONFIG_DMADEVICES=y
+CONFIG_MTK_HSDMA=y
+CONFIG_DMATEST=y
+CONFIG_STAGING=y
+# CONFIG_SURFACE_PLATFORMS is not set
+# CONFIG_COMMON_CLK_MT2712 is not set
+# CONFIG_COMMON_CLK_MT6765 is not set
+# CONFIG_COMMON_CLK_MT6779 is not set
+# CONFIG_COMMON_CLK_MT6795 is not set
+# CONFIG_COMMON_CLK_MT6797 is not set
+# CONFIG_COMMON_CLK_MT7622 is not set
+# CONFIG_COMMON_CLK_MT8167 is not set
+# CONFIG_COMMON_CLK_MT8173 is not set
+# CONFIG_COMMON_CLK_MT8183 is not set
+# CONFIG_COMMON_CLK_MT8186 is not set
+# CONFIG_COMMON_CLK_MT8188 is not set
+# CONFIG_COMMON_CLK_MT8192 is not set
+# CONFIG_COMMON_CLK_MT8195 is not set
+# CONFIG_COMMON_CLK_MT8365 is not set
+# CONFIG_COMMON_CLK_MT8516 is not set
+# CONFIG_FSL_ERRATUM_A008585 is not set
+# CONFIG_HISILICON_ERRATUM_161010101 is not set
+# CONFIG_ARM64_ERRATUM_858921 is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_MTK_PMIC_WRAP=y
+# CONFIG_MTK_MMSYS is not set
+# CONFIG_MTK_SOCINFO is not set
+CONFIG_PM_DEVFREQ=y
+CONFIG_ARM_MEDIATEK_CCI_DEVFREQ=y
+CONFIG_PM_DEVFREQ_EVENT=y
+CONFIG_PWM=y
+CONFIG_PWM_MEDIATEK=y
+# CONFIG_MST_IRQ is not set
+CONFIG_RESET_TI_SYSCON=y
+CONFIG_PHY_MTK_XFI_TPHY=y
+CONFIG_PHY_MTK_TPHY=y
+CONFIG_PHY_MTK_XSPHY=y
+CONFIG_NVMEM_LAYOUT_ADTRAN=y
+CONFIG_NVMEM_AN8855_EFUSE=y
+CONFIG_NVMEM_MTK_EFUSE=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_XFS_FS=y
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_F2FS_FS=y
+CONFIG_F2FS_FS_SECURITY=y
+# CONFIG_F2FS_IOSTAT is not set
+# CONFIG_DNOTIFY is not set
+CONFIG_FANOTIFY=y
+CONFIG_AUTOFS_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_VIRTIO_FS=m
+CONFIG_OVERLAY_FS=y
+CONFIG_OVERLAY_FS_XINO_AUTO=y
+CONFIG_ISO9660_FS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_EXFAT_FS=y
+CONFIG_NTFS3_FS_POSIX_ACL=y
+CONFIG_NTFS_FS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+# CONFIG_JFFS2_ZLIB is not set
+CONFIG_UBIFS_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_FILE_DIRECT=y
+CONFIG_SQUASHFS_COMPILE_DECOMP_MULTI_PERCPU=y
+# CONFIG_SQUASHFS_ZLIB is not set
+CONFIG_SQUASHFS_XZ=y
+CONFIG_SQUASHFS_EMBEDDED=y
+CONFIG_PSTORE=y
+CONFIG_PSTORE_CONSOLE=y
+CONFIG_PSTORE_PMSG=y
+CONFIG_PSTORE_RAM=y
+CONFIG_EROFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFSD=y
+CONFIG_CIFS=y
+CONFIG_SMB_SERVER=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PERSISTENT_KEYRINGS=y
+CONFIG_ENCRYPTED_KEYS=y
+CONFIG_KEY_DH_OPERATIONS=y
+CONFIG_SECURITY_DMESG_RESTRICT=y
+CONFIG_HARDENED_USERCOPY=y
+CONFIG_FORTIFY_SOURCE=y
+CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity"
+CONFIG_INIT_STACK_NONE=y
+CONFIG_LIST_HARDENED=y
+CONFIG_CRYPTO_USER=m
+CONFIG_CRYPTO_PCRYPT=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_DES=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+CONFIG_CRYPTO_USER_API_RNG=m
+CONFIG_CRYPTO_USER_API_AEAD=m
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=m
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_SHA512_ARM64=m
+CONFIG_CRYPTO_AES_ARM64=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_SM4_ARM64_CE_CCM=y
+CONFIG_CRYPTO_SM4_ARM64_CE_GCM=y
+CONFIG_CRYPTO_DEV_SAFEXCEL=m
+CONFIG_CRC_CCITT=y
+# CONFIG_XZ_DEC_X86 is not set
+# CONFIG_XZ_DEC_POWERPC is not set
+# CONFIG_XZ_DEC_ARM is not set
+# CONFIG_XZ_DEC_ARMTHUMB is not set
+# CONFIG_XZ_DEC_ARM64 is not set
+# CONFIG_XZ_DEC_SPARC is not set
+# CONFIG_XZ_DEC_RISCV is not set
+CONFIG_PRINTK_TIME=y
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=15
+CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO_DWARF5=y
+CONFIG_DEBUG_INFO_REDUCED=y
+CONFIG_STRIP_ASM_SYMS=y
+# CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_MAGIC_SYSRQ_SERIAL is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_SLUB_DEBUG is not set
+CONFIG_SCHED_STACK_END_CHECK=y
+CONFIG_PANIC_ON_OOPS=y
+CONFIG_PANIC_TIMEOUT=1
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_RCU_TRACE is not set
+# CONFIG_FTRACE is not set

config/kernel/linux-rockchip-edge.config

@@ -2,7 +2,6 @@
 CONFIG_DEFAULT_HOSTNAME="localhost"
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
-CONFIG_USELIB=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_BPF_SYSCALL=y
@@ -386,7 +385,6 @@ CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
-CONFIG_IP_DCCP=m
 CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_TCP=m
@@ -1129,6 +1127,7 @@ CONFIG_MEDIA_TUNER_XC5000=y
 # CONFIG_DVB_CXD2099 is not set
 # CONFIG_DVB_SP2 is not set
 CONFIG_DRM=y
+CONFIG_DRM_SIMPLEDRM=m
 CONFIG_DRM_ROCKCHIP=y
 CONFIG_ROCKCHIP_DW_HDMI=y
 CONFIG_ROCKCHIP_INNO_HDMI=y
@@ -1138,7 +1137,6 @@ CONFIG_DRM_PANEL_SIMPLE=m
 CONFIG_DRM_DISPLAY_CONNECTOR=m
 CONFIG_DRM_SIMPLE_BRIDGE=m
 CONFIG_DRM_DW_HDMI_CEC=m
-CONFIG_DRM_SIMPLEDRM=m
 CONFIG_DRM_LIMA=m
 CONFIG_DRM_PANFROST=m
 CONFIG_FB=y
@@ -1559,8 +1557,8 @@ CONFIG_HID_SENSOR_ACCEL_3D=m
 CONFIG_AD7606_IFACE_SPI=m
 CONFIG_AD7768_1=m
 CONFIG_ROCKCHIP_SARADC=y
-CONFIG_TI_ADS8344=m
 CONFIG_TI_ADS124S08=m
+CONFIG_TI_ADS8344=m
 CONFIG_IIO_RESCALE=m
 CONFIG_BME680=m
 CONFIG_PMS7003=m
@@ -1735,7 +1733,6 @@ CONFIG_DEFAULT_SECURITY_DAC=y
 CONFIG_LSM="yama,loadpin,safesetid,integrity"
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_PCRYPT=m
-CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
 CONFIG_CRYPTO_CURVE25519=m
@@ -1782,7 +1779,6 @@ CONFIG_CRYPTO_NHPOLY1305_NEON=m
 CONFIG_CRYPTO_BLAKE2B_NEON=m
 CONFIG_CRYPTO_SHA1_ARM_NEON=m
 CONFIG_CRYPTO_SHA1_ARM_CE=m
-CONFIG_CRYPTO_SHA2_ARM_CE=m
 CONFIG_CRYPTO_SHA512_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_AES_ARM_CE=m

config/kernel/linux-uefi-arm64-cloud.config

@@ -1,126 +1,57 @@
-# General Setup
 # CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SMP=y
-CONFIG_HYPERVISOR_GUEST=y
-CONFIG_PARAVIRT=y
-CONFIG_NUMA=y
-CONFIG_HZ_1000=y
-CONFIG_LOG_BUF_SHIFT=18
-CONFIG_PROC_FS=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_CONNECTOR=y
-
-# AWS Support
-CONFIG_XEN=y
-CONFIG_XEN_DOM0=y
-CONFIG_XEN_PVHVM=y
-CONFIG_XEN_BLKDEV_FRONTEND=y
-CONFIG_XEN_NETDEV_FRONTEND=y
-CONFIG_XEN_SCSI_FRONTEND=y
-CONFIG_XEN_FBDEV_FRONTEND=y
-CONFIG_XEN_WDT=y
-CONFIG_ENA_ETHERNET=y
-
-# Azure Support
-CONFIG_HYPERV=y
-CONFIG_HYPERV_UTILS=y
-CONFIG_HYPERV_BALLOON=y
-CONFIG_HYPERV_STORAGE=y
-CONFIG_HYPERV_NET=y
-CONFIG_HYPERV_KEYBOARD=y
-CONFIG_HYPERV_MOUSE=y
-CONFIG_HYPERV_TSCPAGE=y
-CONFIG_HYPERV_VSOCKETS=y
-CONFIG_HYPERV_IOMMU=y
-
-# Power Management and ACPI
-CONFIG_HIBERNATION=y
-CONFIG_ACPI_DOCK=y
-CONFIG_ACPI_BGRT=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_ARM_SCPI_CPUFREQ=y
-
-# EFI Support
-CONFIG_EFI=y
-CONFIG_EFI_STUB=y
-CONFIG_EFI_MIXED=y
-
-# Kernel Features
-CONFIG_KEXEC=y
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_BPF_JIT=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_BSD_PROCESS_ACCT=y
 CONFIG_TASKSTATS=y
 CONFIG_TASK_DELAY_ACCT=y
 CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
-
-# Memory Management Options
-CONFIG_HUGETLBFS=y
-
-# Namespaces and Control Groups
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=18
 CONFIG_CGROUPS=y
+CONFIG_MEMCG=y
 CONFIG_BLK_CGROUP=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_CFS_BANDWIDTH=y
+CONFIG_RT_GROUP_SCHED=y
 CONFIG_CGROUP_PIDS=y
-
-# Module Support
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_BPF=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_KEXEC=y
+CONFIG_ARCH_THUNDER=y
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_NUMA=y
+CONFIG_HZ_1000=y
+CONFIG_XEN=y
+CONFIG_ARM64_PSEUDO_NMI=y
+CONFIG_HIBERNATION=y
+CONFIG_ACPI=y
+CONFIG_JUMP_LABEL=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
-
-# Virtualization
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_INPUT=y
-CONFIG_VIRTIO_BLK=y
-CONFIG_VIRTIO_NET=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_DRM_VIRTIO_GPU=y
-CONFIG_NET_9P=y
-CONFIG_NET_9P_VIRTIO=y
-CONFIG_SCSI_VIRTIO=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_SCSI=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_NET_FAILOVER=y
-
-# File Systems
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_QUOTA=y
-CONFIG_QUOTA_NETLINK_INTERFACE=y
-# CONFIG_PRINT_QUOTA_WARNING is not set
-CONFIG_QFMT_V2=y
-CONFIG_AUTOFS_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_9P_FS=y
-CONFIG_XFS_FS=y
-CONFIG_BTRFS_FS=y
-CONFIG_FUSE_FS=y
-
-# Networking
+CONFIG_BLK_DEV_THROTTLING=y
+CONFIG_BINFMT_MISC=y
+CONFIG_ZSWAP=y
+CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_NET=y
 CONFIG_PACKET=y
-CONFIG_UNIX=y
 CONFIG_XFRM_USER=y
-CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y
 CONFIG_IP_MULTIPLE_TABLES=y
@@ -133,7 +64,7 @@ CONFIG_IP_PNP_RARP=y
 CONFIG_IP_MROUTE=y
 CONFIG_IP_PIMSM_V1=y
 CONFIG_IP_PIMSM_V2=y
-CONFIG_SYN_COOKIES=y
+CONFIG_INET_ESP=m
 # CONFIG_INET_DIAG is not set
 CONFIG_TCP_CONG_ADVANCED=y
 # CONFIG_TCP_CONG_BIC is not set
@@ -143,77 +74,114 @@ CONFIG_TCP_MD5SIG=y
 CONFIG_INET6_AH=y
 CONFIG_INET6_ESP=y
 CONFIG_NETLABEL=y
-CONFIG_NETDEVICES=y
-CONFIG_NETCONSOLE=y
-
-# Ethernet Drivers
-CONFIG_E1000E=y
-
-# Wireless Networking
+CONFIG_NETFILTER=y
+CONFIG_BRIDGE_NETFILTER=m
+CONFIG_NF_CONNTRACK=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_LABELS=y
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_TABLES=y
+CONFIG_NF_TABLES_INET=y
+CONFIG_NF_TABLES_NETDEV=y
+CONFIG_NFT_NAT=m
+CONFIG_NFT_TUNNEL=m
+CONFIG_NFT_QUOTA=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_XFRM=m
+CONFIG_NFT_SOCKET=m
+CONFIG_NFT_TPROXY=m
+CONFIG_NFT_SYNPROXY=m
+CONFIG_NFT_DUP_NETDEV=m
+CONFIG_NFT_FWD_NETDEV=m
+CONFIG_NFT_REJECT_NETDEV=m
+CONFIG_NETFILTER_XT_MARK=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_IPVS=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_NFCT=y
+CONFIG_IP_NF_IPTABLES=y
+CONFIG_IP_NF_FILTER=y
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_SECURITY=y
+CONFIG_BRIDGE=y
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_VLAN_8021Q=m
+CONFIG_NET_SCHED=y
+CONFIG_NET_CLS_CGROUP=m
+CONFIG_CGROUP_NET_PRIO=y
 CONFIG_CFG80211=y
 CONFIG_MAC80211=y
-CONFIG_MAC80211_LEDS=y
 CONFIG_RFKILL=y
-
-# PCI Support
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_HOTPLUG_PCI=y
-
-# Block Devices
-CONFIG_BLK_DEV_INITRD=y
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_ZRAM=m
+CONFIG_ZRAM_WRITEBACK=y
 CONFIG_BLK_DEV_LOOP=y
+CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_CHR_DEV_SG=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SPI_ATTRS=y
-
-# Storage Controllers
+CONFIG_XEN_SCSI_FRONTEND=y
+CONFIG_SCSI_VIRTIO=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_ATA_PIIX=y
-
-# RAID and Volume Management
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=y
 CONFIG_BLK_DEV_DM=y
 CONFIG_DM_MIRROR=y
 CONFIG_DM_ZERO=y
-
-# Input Devices
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_WIREGUARD=m
+CONFIG_MACVLAN=m
+CONFIG_IPVLAN=m
+CONFIG_VXLAN=m
+CONFIG_NETCONSOLE=y
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=y
+CONFIG_NETKIT=y
+CONFIG_ENA_ETHERNET=y
+CONFIG_E1000E=y
+# CONFIG_WLAN is not set
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_MISC=y
-
-# Watchdog
-CONFIG_WATCHDOG=y
-
-# Real Time Clock
-CONFIG_RTC_CLASS=y
-
-# Random Number Generator
+CONFIG_VIRTIO_CONSOLE=y
 CONFIG_HW_RANDOM=y
-
-# NVRAM
-CONFIG_NVRAM=y
-
-# HPET Timer
-CONFIG_HPET=y
-
-# I2C Support
+CONFIG_HW_RANDOM_VIRTIO=y
 CONFIG_I2C_I801=y
-
-# Security Options
-CONFIG_SECURITY=y
-CONFIG_SECURITY_NETWORK=y
-CONFIG_SECURITY_SELINUX=y
-CONFIG_SECURITY_SELINUX_BOOTPARAM=y
-# CONFIG_SECURITY_SELINUX_DISABLE is not set
-
-# Audit
-CONFIG_AUDIT=y
-
-# Sound
+CONFIG_WATCHDOG=y
+CONFIG_XEN_WDT=y
+CONFIG_DRM=y
+CONFIG_DRM_VIRTIO_GPU=y
+CONFIG_DRM_SIMPLEDRM=y
+CONFIG_FB=y
+CONFIG_FB_EFI=y
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_HRTIMER=y
@@ -221,13 +189,9 @@ CONFIG_SND_SEQUENCER=y
 CONFIG_SND_SEQ_DUMMY=y
 CONFIG_SND_HDA_INTEL=y
 CONFIG_SND_HDA_HWDEP=y
-
-# HID Devices
 CONFIG_HIDRAW=y
 CONFIG_HID_PID=y
 CONFIG_USB_HIDDEV=y
-
-# USB Support
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y
@@ -236,52 +200,58 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_UHCI_HCD=y
 CONFIG_USB_STORAGE=y
-
-# Filesystem Encoding
+CONFIG_RTC_CLASS=y
+CONFIG_UIO=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_INPUT=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_ARM_SMMU=y
+CONFIG_ARM_SMMU_V3=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_XFS_FS=y
+CONFIG_BTRFS_FS=y
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_OVERLAY_FS=m
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_HUGETLBFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_9P_FS=y
 CONFIG_NLS_DEFAULT="utf8"
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_ASCII=y
 CONFIG_NLS_ISO8859_1=y
 CONFIG_NLS_UTF8=y
-
-# Miscellaneous
-CONFIG_BINFMT_MISC=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_JUMP_LABEL=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FB=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FB_EFI=y
-CONFIG_FB_SIMPLE=y
-CONFIG_EFI_FRAMEBUFFER=y
-CONFIG_DRM=y
-CONFIG_DRM_SIMPLEDRM=y
-CONFIG_DRM_KMS_HELPER=y
-CONFIG_DRM_FBDEV_EMULATION=y
-CONFIG_DRM_FBDEV_OVERALLOC=100
-CONFIG_FONT_SUPPORT=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-
-# AArch64-specific options
-CONFIG_ARM64=y
-CONFIG_ARCH_AMPERE=y
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_ARM64_PSEUDO_NMI=y
-CONFIG_ARCH_THUNDER=y
-CONFIG_ARM64_CONTIGUOUSRegions=y
-CONFIG_ARM64_VHE=y
-CONFIG_ARM_SMMU=y
-CONFIG_ARM_SMMU_V3=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_HW_RANDOM_VIRTIO=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_SHA3=y
-CONFIG_CRYPTO_AES_ARM64_CE=y
-CONFIG_CRYPTO_GCM=y
+CONFIG_PERSISTENT_KEYRINGS=y
+CONFIG_ENCRYPTED_KEYS=y
+CONFIG_KEY_DH_OPERATIONS=y
+CONFIG_SECURITY=y
+CONFIG_SECURITY_SELINUX=y
+CONFIG_SECURITY_SELINUX_BOOTPARAM=y
+CONFIG_SECURITY_APPARMOR=y
 CONFIG_CRYPTO_CHACHA20POLY1305=y
+CONFIG_CRYPTO_AES_ARM64_CE=y
 CONFIG_CRYPTO_DEV_CAVIUM_ZIP=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_DEBUG_INFO_DWARF5=y
+CONFIG_DEBUG_INFO_BTF=y
+CONFIG_FTRACE_SYSCALLS=y

config/kernel/linux-uefi-x86-cloud.config

@@ -125,6 +125,7 @@ CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_XFRM_USER=y
+CONFIG_WIREGUARD=y
 CONFIG_INET=y
 CONFIG_IP_MULTICAST=y
 CONFIG_IP_ADVANCED_ROUTER=y

config/optional/architectures/loong64/_config/cli/sid/debootstrap/packages

@@ -0,0 +1 @@
+debian-ports-archive-keyring

config/sources/families/filogic.conf

@@ -0,0 +1,67 @@
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2013-2023 Igor Pecovnik, igor@armbian.com
+#
+# This file is a part of the Armbian Build Framework
+# https://github.com/armbian/build/
+#
+declare -g ARCH=arm64
+declare -g OFFSET=16
+declare -g ATFSOURCE='https://github.com/mtk-openwrt/arm-trusted-firmware.git'
+declare -g ATF_TARGET_MAP="PLAT=mt7988 BOOT_DEVICE=sdmmc USE_MKIMAGE=1 BOARD_BGA=1 HAVE_DRAM_OBJ_FILE=yes DRAM_USE_COMB=1 all;;build/mt7988/release/bl2.img build/mt7988/release/bl31.bin"
+declare -g ATFBRANCH="branch:mtksoc-20250212"
+declare -g BOOTDELAY=1
+declare -g BOOTPATCHDIR="${BOOTPATCHDIR:-"u-boot-filogic"}"
+declare -g BOOTBRANCH="${BOOTBRANCH:-"tag:v2025.04"}"
+declare -g BOOTENV_FILE='filogic.txt'
+declare -g UBOOT_TARGET_MAP=";;u-boot.bin u-boot_sdmmc.fip bl2.img"
+declare -g BOOTSCRIPT='boot-filogic.cmd:boot.cmd'
+declare -g IMAGE_PARTITION_TABLE="gpt"
+declare -g LINUXFAMILY=filogic
+
+# This build requires xxd
+function add_host_dependencies__filogic_add_xxd_hostdep() {
+	display_alert "Adding xxd dep" "for ${BOARD} bootloader compile" "debug"
+	declare -g EXTRA_BUILD_DEPS="${EXTRA_BUILD_DEPS} xxd arm-trusted-firmware-tools"
+}
+
+# Handling of FIP blobs
+function uboot_custom_postprocess() {
+	run_host_command_logged rm -f "$SRC"/cache/sources/u-boot-worktree/u-boot/v2025.04/bl2.img
+	run_host_command_logged cp "$SRC"/cache/sources/arm-trusted-firmware/mtksoc-20250212/build/mt7988/release/bl2.img \
+	  "$SRC"/cache/sources/u-boot-worktree/u-boot/v2025.04
+
+	run_host_command_logged rm -f "$SRC"/cache/sources/u-boot-worktree/u-boot/v2025.04/u-boot_sdmmc.fip
+	run_host_command_logged fiptool create \
+	  --soc-fw "$SRC"/cache/sources/arm-trusted-firmware/mtksoc-20250212/build/mt7988/release/bl31.bin \
+	  --nt-fw "$SRC"/cache/sources/u-boot-worktree/u-boot/v2025.04/u-boot.bin \
+	  "$SRC"/cache/sources/u-boot-worktree/u-boot/v2025.04/u-boot_sdmmc.fip
+}
+
+case $BRANCH in
+
+	current)
+		KERNELSOURCE='https://github.com/chainsx/linux-filogic.git'
+		KERNELBRANCH="branch:linux-6.12.35"
+		declare -g KERNEL_MAJOR_MINOR="6.12"
+		KERNELPATCHDIR="${LINUXFAMILY}-${BRANCH}"
+		LINUXCONFIG="linux-${LINUXFAMILY}-${BRANCH}"
+
+		;;
+esac
+
+#KERNELPATCHDIR="archive/filogic-${KERNEL_MAJOR_MINOR}"
+
+write_uboot_platform() {
+	dd if=$1/bl2.img of=$2 bs=512 seek=34 status=noxfer > /dev/null 2>&1
+	dd if=$1/u-boot_sdmmc.fip of=$2 bs=512 seek=13312 status=noxfer >/dev/null 2>&1
+	
+	# backup gpt table
+	LAST_START=$(parted "$2" unit s print | grep -v "^$" | tail -n 1 | awk '{print $2}' | tr -d 's')
+	LAST_SIZE=$(parted "$2" unit s print | grep -v "^$" | tail -n 1 | awk '{print $4}' | tr -d 's')
+	# write mtk gpt table
+	dd if="${SRC}/packages/blobs/filogic/gpt" of="$2" conv=notrunc
+	# append armbian rootfs info
+	echo "${LAST_START},${LAST_SIZE}" | sfdisk --no-reread --append "$2"
+}

config/sources/families/imx6.conf

@@ -29,7 +29,7 @@ case $BRANCH in
 
 	edge)
 
-		declare -g KERNEL_MAJOR_MINOR="6.10" # Major and minor versions of this kernel.
+		declare -g KERNEL_MAJOR_MINOR="6.15" # Major and minor versions of this kernel.
 		;;
 
 esac

config/sources/families/include/rockchip64_common.inc

@@ -57,6 +57,7 @@ esac
 # - tpl-blob-atf-mainline: proprietary rockchip ddrbin + mainline u-boot SPL + mainline ATF
 # - blobless: mainline u-boot TPL + mainline u-boot SPL + mainline ATF
 # - binman:  u-boot builds full boot image from information in device tree.  See: https://docs.u-boot.org/en/latest/develop/package/binman.html
+# - binman-atf-mainline:  u-boot builds full boot image with mainline ATF from information in device tree.  See: https://docs.u-boot.org/en/latest/develop/package/binman.html
 
 #BOOT_SOC=`expr $BOOTCONFIG : '.*\(rk[[:digit:]]\+.*\)_.*'`
 BOOT_SOC=${BOOT_SOC:=$(expr $BOOTCONFIG : '.*\(rk[[:digit:]]\+.*\)_.*' || true)}
@@ -160,7 +161,7 @@ prepare_boot_configuration() {
 	ATFSOURCE=''
 	ATF_COMPILE='no'
 	case "$BOOT_SCENARIO" in
-		blobless | tpl-blob-atf-mainline)
+		blobless | tpl-blob-atf-mainline | binman-atf-mainline)
 			UBOOT_TARGET_MAP="BL31=bl31.elf idbloader.img u-boot.itb;;idbloader.img u-boot.itb"
 			ATF_COMPILE=yes
 			ATFSOURCE='https://github.com/ARM-software/arm-trusted-firmware'
@@ -173,6 +174,10 @@ prepare_boot_configuration() {
 
 			[[ $BOOT_SCENARIO == tpl-blob-atf-mainline ]] &&
 				UBOOT_TARGET_MAP="BL31=bl31.elf idbloader.img u-boot.itb;;idbloader.img u-boot.itb"
+			[[ $BOOT_SCENARIO == binman-atf-mainline ]] &&
+				UBOOT_TARGET_MAP="BL31=bl31.elf ROCKCHIP_TPL=$RKBIN_DIR/$DDR_BLOB;;u-boot-rockchip.bin"
+				# binman builds do not have separate build targets for idbloader.img and u-boot.itb
+				# ROCKCHIP_TPL needed for boards with CONFIG_ROCKCHIP_EXTERNAL_TPL, ignored for boards without it
 			;;
 		tpl-spl-blob)
 			UBOOT_TARGET_MAP="BL31=$RKBIN_DIR/$BL31_BLOB idbloader.img u-boot.itb;;idbloader.img u-boot.itb"
@@ -209,7 +214,8 @@ uboot_custom_postprocess() {
 	display_alert "${BOARD}" "boots with ${BOOT_SCENARIO} scenario" "info"
 
 	case "$BOOT_SCENARIO" in
-		blobless | tpl-spl-blob | binman)
+		blobless | tpl-spl-blob | binman*)
+			# binman-atf-mainline functions the same as original `binman` after build
 			:
 			;;
 
@@ -280,7 +286,7 @@ write_uboot_platform() {
 	local logging_prelude=""
 	[[ $(type -t run_host_command_logged) == function ]] && logging_prelude="run_host_command_logged"
 
-	if [ -f $1/u-boot-rockchip.bin ]; then #"$BOOT_SCENARIO" == binman
+	if [ -f $1/u-boot-rockchip.bin ]; then #"$BOOT_SCENARIO" == "binman" or "binman-atf-mainline"
 		${logging_prelude} dd if=$1/u-boot-rockchip.bin of=$2 bs=32k seek=1 conv=notrunc status=none
 	elif [ -f $1/rksd_loader.img ]; then # legacy rk3399 loader
 		${logging_prelude} dd if=$1/rksd_loader.img of=$2 seek=64 conv=notrunc status=none

config/sources/families/include/uefi_common.inc

@@ -41,7 +41,7 @@ case "${BRANCH}" in
 		;;
 
 	edge)
-		declare -g KERNEL_MAJOR_MINOR="6.15"
+		declare -g KERNEL_MAJOR_MINOR="6.16"
 		;;
 esac
 

config/sources/families/jethub.conf

@@ -105,7 +105,7 @@ write_uboot_platform() {
 		dd if="$1/u-boot.bin" of="$of_boot1" bs=512 skip=1 conv=fsync > /dev/null 2>&1
 	fi
 
-	logger "${FUNCNAME[0]}(): u-boot successfulley installed"
+	logger "${FUNCNAME[0]}(): u-boot successfully installed"
 }
 
 comment_default_rsyslog_rules() {

config/sources/families/mvebu.conf

@@ -31,7 +31,7 @@ case $BRANCH in
 
 	edge)
 
-		declare -g KERNEL_MAJOR_MINOR="6.12" # Major and minor versions of this kernel.
+		declare -g KERNEL_MAJOR_MINOR="6.15" # Major and minor versions of this kernel.
 		;;
 
 esac

config/sources/families/odroidxu4.conf

@@ -28,8 +28,8 @@ case $BRANCH in
 		;;
 
 	edge)
-		declare -g KERNEL_MAJOR_MINOR="6.10" # Major and minor versions of this kernel.
-		KERNELBRANCH='branch:linux-6.10.y'
+		declare -g KERNEL_MAJOR_MINOR="6.15" # Major and minor versions of this kernel.
+		KERNELBRANCH='branch:linux-6.15.y'
 		;;
 
 esac

config/sources/families/rockchip.conf

@@ -56,7 +56,7 @@ case $BRANCH in
 
 	edge)
 
-		declare -g KERNEL_MAJOR_MINOR="6.15" # Major and minor versions of this kernel.
+		declare -g KERNEL_MAJOR_MINOR="6.16" # Major and minor versions of this kernel.
 		;;
 
 esac

config/sources/families/spacemit.conf

@@ -11,17 +11,17 @@ declare -g ARCH="riscv64"
 declare -g LINUXFAMILY="spacemit"
 declare -g GOVERNOR="performance"
 
-# Arm Trusted Firmware
+# OpenSBI
 declare -g ATF_USE_GCC="> 8.0"
 declare -g ATF_COMPILER="riscv64-linux-gnu-"
 declare -g ATFSOURCE="https://gitee.com/bianbu-linux/opensbi.git"
 declare -g ATFDIR="opensbi"
-declare -g ATFBRANCH="tag:k1-bl-v2.1-release"
+declare -g ATFBRANCH="tag:k1-bl-v2.2-release"
 declare -g ATF_TARGET_MAP="PLATFORM_DEFCONFIG=k1_defconfig PLATFORM=generic ;;build/platform/generic/firmware/fw_dynamic.itb"
 
 # U-Boot
 declare -g BOOTSOURCE="https://gitee.com/bianbu-linux/uboot-2022.10.git"
-declare -g BOOTBRANCH="${BOOTBRANCH_BOARD:-"tag:k1-bl-v2.1-release"}"
+declare -g BOOTBRANCH="${BOOTBRANCH_BOARD:-"tag:k1-bl-v2.2-release"}"
 declare -g BOOTDIR='u-boot-spacemit'
 declare -g BOOTPATCHDIR="${BOOTPATCHDIR:-"legacy/u-boot-spacemit-k1"}"
 declare -g UBOOT_TARGET_MAP=";;bootinfo_emmc.bin FSBL.bin u-boot.itb fw_dynamic.itb"
@@ -36,6 +36,13 @@ case "${BRANCH}" in
 		declare -g KERNEL_MAJOR_MINOR="6.6"
 		declare -g LINUXCONFIG="linux-${LINUXFAMILY}-current"
 		;;
+	edge)
+		declare -g KERNELSOURCE="https://github.com/jmontleon/linux-bianbu.git"
+		declare -g KERNELBRANCH="branch:linux-6.16.y"
+		declare -g EXTRAWIFI="no" # WiFi drivers are already included in the kernel
+		declare -g KERNEL_MAJOR_MINOR="6.16"
+		declare -g LINUXCONFIG="linux-${LINUXFAMILY}-edge"
+		;;
 esac
 
 function custom_kernel_config__spacemit_k1_firmware() {

config/sources/families/sun50iw9-bpi.conf

@@ -17,7 +17,7 @@ case $BRANCH in
 	current | edge)
 		declare -g BOOTBRANCH="${BOOTBRANCH_BOARD}"
 		declare -g ATFSOURCE='https://github.com/ARM-software/arm-trusted-firmware'
-		declare -g ATFBRANCH='tag:lts-v2.12.1'
+		declare -g ATFBRANCH='tag:lts-v2.12.5'
 		declare -g ATF_PLAT="sun50i_h616"
 		declare -g ATF_TARGET_MAP='PLAT=sun50i_h616 DEBUG=1 bl31;;build/sun50i_h616/debug/bl31.bin'
 		declare -g BOOTSCRIPT='boot-sun50i-next.cmd:boot.cmd'

config/sources/families/sun55iw3.conf

@@ -13,23 +13,21 @@ declare -g ATF_TARGET_MAP="PLAT=sun55i_a523 DEBUG=1 bl31;;build/sun55i_a523/debu
 declare -g ATFBRANCH="branch:a523"
 declare -g BOOTSCRIPT='boot-sun50i-next.cmd:boot.cmd'
 declare -g BOOTDELAY=1
-declare -g BOOTSOURCE='https://github.com/jernejsk/u-boot/'
+declare -g BOOTSOURCE='https://github.com/u-boot/u-boot.git'
 declare -g BOOTPATCHDIR="sunxi-dev-${BOOTPATCHDIR:-"u-boot-a523"}"
-declare -g BOOTBRANCH="${BOOTBRANCH:-"branch:a523"}"
+declare -g BOOTBRANCH="${BOOTBRANCH:-"branch:master"}"
 declare -g BOOTENV_FILE='sunxi.txt'
 declare -g UBOOT_TARGET_MAP="${UBOOT_TARGET_MAP:-BINMAN_ALLOW_MISSING=1;;u-boot-sunxi-with-spl.bin}"
 declare -g OVERLAY_DIR="/boot/dtb/allwinner/overlay"
-declare -g LINUXFAMILY="sun55iw3"
+declare -g LINUXFAMILY="sunxi64"
 
 case "${BRANCH}" in
 
-	dev)
-		declare -g KERNELSOURCE='https://github.com/apritzel/linux'
-		declare -g KERNELBRANCH='branch:a523-v3'
-		declare -g KERNEL_MAJOR_MINOR="6.14" # Major and minor versions of this kernel.
-		KERNELPATCHDIR="archive/sunxi-dev-${KERNEL_MAJOR_MINOR}"
+	edge)
+		declare -g KERNEL_MAJOR_MINOR="6.16" # Major and minor versions of this kernel.
+		declare -g KERNELBRANCH="tag:v6.16"
+		KERNELPATCHDIR="archive/sunxi-${KERNEL_MAJOR_MINOR}"
 		;;
-
 esac
 
 family_tweaks() {

config/sources/families/uefi-loong64.conf

@@ -0,0 +1,16 @@
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2013-2023 Igor Pecovnik, igor@armbian.com
+#
+# This file is a part of the Armbian Build Framework
+# https://github.com/armbian/build/
+#
+# Important: LINUXFAMILY and ARCH are defined _before_ including the common family include
+declare -g UBOOT_USE_GCC="none"
+declare -g UEFI_GRUB_TERMINAL="gfxterm"
+declare -g LINUXFAMILY="loong64"
+declare -g ARCH="loong64"
+# shellcheck source=config/sources/families/include/uefi_common.inc
+source "${BASH_SOURCE%/*}/include/uefi_common.inc"
+enable_extension "grub"

config/sources/loong64.conf

@@ -0,0 +1,33 @@
+#
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2013-2023 Igor Pecovnik, igor@armbian.com
+#
+# This file is a part of the Armbian Build Framework
+# https://github.com/armbian/build/
+#
+# 'common.conf' is already sourced when this arch is sourced.
+
+declare -g ARCH='loong64'
+declare -g ARCHITECTURE='loongarch'
+declare -g QEMU_BINARY='qemu-loongarch64-static'
+declare -g IMAGE_PARTITION_TABLE='gpt'
+declare -g SKIP_EXTERNAL_TOOLCHAINS='yes'
+declare -g KERNEL_SRC_ARCH='loongarch'
+
+# Linux root has a different Type-UUID for every architecture
+# See https://uapi-group.org/specifications/specs/discoverable_partitions_specification/
+declare -g PARTITION_TYPE_UUID_ROOT="77055800-792c-4f94-b39a-98c91b762bb6" # "Linux root (LoongArch 64-bit)"
+
+# Defaults, if not set by board or family.
+declare -g KERNEL_IMAGE_TYPE="${KERNEL_IMAGE_TYPE:-"vmlinux"}"
+declare -g KERNEL_INSTALL_TYPE="${KERNEL_INSTALL_TYPE:-"install"}"
+declare -g NAME_KERNEL="${NAME_KERNEL:-"vmlinux"}"
+declare -g NAME_INITRD="${NAME_INITRD:-"initrd.img"}"
+
+[[ -z $KERNEL_COMPILER ]] && KERNEL_COMPILER='loongarch64-linux-gnu-'
+[[ -z $UBOOT_COMPILER ]] && UBOOT_COMPILER='loongarch64-linux-gnu-'
+[[ -z $KERNEL_USE_GCC ]] && KERNEL_USE_GCC='> 13.0'
+[[ -z $UBOOT_USE_GCC ]] && UBOOT_USE_GCC='> 13.0'
+
+true # make sure to exit with 0 status; this protects against shortcircuits etc above.

config/sources/mainline-kernel.conf.sh

@@ -7,8 +7,8 @@
 # Shared versioning logic for Armbian mainline kernels.
 function mainline_kernel_decide_version__upstream_release_candidate_number() {
 	[[ -n "${KERNELBRANCH}" ]] && return 0           # if already set, don't touch it; that way other hooks can run in any order
-	if [[ "${KERNEL_MAJOR_MINOR}" == "6.16" ]]; then # @TODO: roll over to next MAJOR.MINOR and MAJOR.MINOR-rc1 when it is released
-		declare -g KERNELBRANCH="tag:v6.16-rc3"
+	if [[ "${KERNEL_MAJOR_MINOR}" == "6.17" ]]; then # @TODO: roll over to next MAJOR.MINOR and MAJOR.MINOR-rc1 when it is released
+		declare -g KERNELBRANCH="tag:v6.17-rc1"
 		display_alert "mainline-kernel: upstream release candidate" "Using KERNELBRANCH='${KERNELBRANCH}' for KERNEL_MAJOR_MINOR='${KERNEL_MAJOR_MINOR}'" "info"
 	fi
 }

extensions/apa.sh

@@ -18,7 +18,7 @@ function post_armbian_repo_customize_image__install_from_apa() {
 	case ${DESKTOP_ENVIRONMENT^^} in
 		XFCE|KDE|GNOME)
 			display_alert "installing ${DESKTOP_ENVIRONMENT^^} desktop environment" "${EXTENSION}: ${DESKTOP_ENVIRONMENT^^}" "info"
-			chroot_sdcard_apt_get --install-recommends=yes "armbian-desktop-${DESKTOP_ENVIRONMENT,,}"
+			chroot_sdcard_apt_get install --install-recommends=yes "armbian-desktop-${DESKTOP_ENVIRONMENT,,}"
 			;;
 	esac
 }

extensions/fs-cryptroot-support.sh

@@ -74,7 +74,7 @@ function pre_install_kernel_debs__adjust_dropbear_configuration() {
 }
 
 function post_umount_final_image__export_private_key(){
-	if [[ $CRYPTROOT_SSH_UNLOCK == yes ]]; then
+	if [[ $CRYPTROOT_SSH_UNLOCK == yes && -f "${DROPBEAR_DIR}"/id_ecdsa ]]; then
 		CRYPTROOT_SSH_UNLOCK_KEY_PATH="${DESTIMG}/${version}.key"
 		# copy dropbear ssh key to image output dir for convenience
 		cp "${DROPBEAR_DIR}"/id_ecdsa "${CRYPTROOT_SSH_UNLOCK_KEY_PATH}"

extensions/grub.sh

@@ -38,11 +38,14 @@ function extension_prepare_config__prepare_grub_standard() {
 			else
 				packages+=("grub-efi-${ARCH}")
 			fi
+		else
+			packages+=("grub-efi-${ARCH}")
 		fi
 
 		if [[ "${ARCH}" == "arm64" ]]; then
-			packages+=("grub-efi-${ARCH}")
 			declare -g UEFI_GRUB_TARGET="arm64-efi" # Default for arm64-efi
+		elif [[ "${ARCH}" == "loong64" ]]; then
+			declare -g UEFI_GRUB_TARGET="loongarch64-efi"
 		fi
 	fi
 

extensions/radxa-aic8800.sh

@@ -10,7 +10,7 @@ function extension_finish_config__install_kernel_headers_for_aic8800_dkms() {
 
 function post_install_kernel_debs__install_aic8800_dkms_package() {
 
-	if linux-version compare "${KERNEL_MAJOR_MINOR}" ge 6.15; then
+	if linux-version compare "${KERNEL_MAJOR_MINOR}" ge 6.17; then
 		display_alert "Kernel version is too recent" "skipping aic8800 dkms for kernel v${KERNEL_MAJOR_MINOR}" "warn"
 		return 0
 	fi

extensions/yt6801.sh

@@ -0,0 +1,27 @@
+function extension_finish_config__install_kernel_headers_for_yt6801_dkms() {
+
+	if [[ "${KERNEL_HAS_WORKING_HEADERS}" != "yes" ]]; then
+		display_alert "Kernel version has no working headers package" "skipping yt6801 dkms for kernel v${KERNEL_MAJOR_MINOR}" "warn"
+		return 0
+	fi
+	declare -g INSTALL_HEADERS="yes"
+	display_alert "Forcing INSTALL_HEADERS=yes; for use with yt6801 dkms" "${EXTENSION}" "debug"
+}
+
+function post_install_kernel_debs__install_yt6801_dkms_package() {
+
+	[[ "${INSTALL_HEADERS}" != "yes" ]] || [[ "${KERNEL_HAS_WORKING_HEADERS}" != "yes" ]] && return 0
+	api_url="https://api.github.com/repos/amazingfate/yt6801-dkms/releases/latest"
+	latest_version=$(curl -s "${api_url}" | jq -r '.tag_name')
+	yt6801_dkms_url="https://github.com/amazingfate/yt6801-dkms/releases/download/${latest_version}/yt6801-dkms_${latest_version}_all.deb"
+	if [[ "${GITHUB_MIRROR}" == "ghproxy" ]]; then
+		ghproxy_header="https://ghfast.top/"
+		yt6801_dkms_url=${ghproxy_header}${yt6801_dkms_url}
+	fi
+	yt6801_dkms_file_name=yt6801-dkms_${latest_version}_all.deb
+	use_clean_environment="yes" chroot_sdcard "wget ${yt6801_dkms_url} -P /tmp"
+	display_alert "Install yt6801 packages, will build kernel module in chroot" "${EXTENSION}" "info"
+	declare -ag if_error_find_files_sdcard=("/var/lib/dkms/yt6801*/*/build/*.log")
+	use_clean_environment="yes" chroot_sdcard_apt_get_install /tmp/${yt6801_dkms_file_name}
+	use_clean_environment="yes" chroot_sdcard "rm -f /tmp/yt6801*.deb"
+}

lib/functions/compilation/kernel-debs.sh

@@ -202,8 +202,11 @@ function kernel_package_callback_linux_image() {
 
 	# @TODO: we expect _all_ kernels to produce this, which is... not true.
 	declare kernel_pre_package_path="${tmp_kernel_install_dirs[INSTALL_PATH]}"
-	declare kernel_image_pre_package_path="${kernel_pre_package_path}/vmlinuz-${kernel_version_family}"
-	declare installed_image_path="boot/vmlinuz-${kernel_version_family}" # using old mkdebian terminology here for compatibility
+	kernel_image_installed_file_name=$(basename $(ls ${kernel_pre_package_path}/vmlinu*-${kernel_version_family}))
+	kernel_image_name=${kernel_image_installed_file_name%%-*}
+	display_alert "linux-image deb packaging kernel_image_name" "${kernel_image_name}" "info"
+	declare kernel_image_pre_package_path="${kernel_pre_package_path}/${kernel_image_name}-${kernel_version_family}"
+	declare installed_image_path="boot/${kernel_image_name}-${kernel_version_family}" # using old mkdebian terminology here for compatibility
 
 	display_alert "Showing contents of Kbuild produced /boot" "linux-image" "debug"
 	run_host_command_logged tree -C --du -h "${tmp_kernel_install_dirs[INSTALL_PATH]}"
@@ -262,7 +265,7 @@ function kernel_package_callback_linux_image() {
 		Maintainer: ${MAINTAINER} <${MAINTAINERMAIL}>
 		Section: kernel
 		Priority: optional
-		Provides: linux-image, linux-image-armbian, armbian-$BRANCH
+		Provides: linux-image, linux-image-armbian, armbian-$BRANCH, wireguard-modules
 		Description: Armbian Linux $BRANCH kernel image $kernel_version_family
 		 This package contains the Linux kernel, modules and corresponding other files.
 		 ${artifact_version_reason:-"${kernel_version_family}"}
@@ -385,6 +388,7 @@ function kernel_package_callback_linux_headers() {
 	[[ "${SRC_ARCH}" == "amd64" ]] && SRC_ARCH="x86"
 	[[ "${SRC_ARCH}" == "armhf" ]] && SRC_ARCH="arm"
 	[[ "${SRC_ARCH}" == "riscv64" ]] && SRC_ARCH="riscv"
+	[[ "${SRC_ARCH}" == "loong64" ]] && SRC_ARCH="loongarch"
 	# @TODO: added KERNEL_SRC_ARCH to each arch'es .config file; let's make sure they're sane. Just use KERNEL_SRC_ARCH after confirmed.
 	# Lets check and warn if it isn't. If warns don't popup over time we remove and just use ARCHITECTURE later.
 	if [[ "${SRC_ARCH}" != "${KERNEL_SRC_ARCH}" ]]; then

lib/functions/compilation/patch/drivers_network.sh

@@ -174,12 +174,12 @@ driver_rtl8811_rtl8812_rtl8814_rtl8821() {
 
 	if linux-version compare "${version}" ge 3.14; then
 
-		# Attach to specific commit (is branch:v5.6.4.2)
-		local rtl8812auver="commit:fd80508096699705ec9eb95c7a5c970fa6c2ecdc" # Commit date: 2025-05-03 (please update when updating commit ref)
+		# Attach to specific commit (is branch:v5.6.4.2_fix_6.15)
+		local rtl8812auver="commit:6e736a32f24605d8625d90f0edabf5a1669c7a74" # Commit date: 2025-06-01 (please update when updating commit ref)
 
 		display_alert "Adding" "Wireless drivers for Realtek 8811, 8812, 8814 and 8821 chipsets ${rtl8812auver}" "info"
 
-		fetch_from_repo "$GITHUB_SOURCE/domin144/rtl8812au" "rtl8812au" "${rtl8812auver}" "yes" # https://github.com/aircrack-ng/rtl8812au
+		fetch_from_repo "$GITHUB_SOURCE/domin144/rtl8812au" "rtl8812au" "${rtl8812auver}" "yes" # https://github.com/domin144/rtl8812au
 		cd "$kerneldir" || exit
 
 		# Brief detour. Turns out that HardKernel's vendor odroidxu4 kernel already has this driver
@@ -210,6 +210,9 @@ driver_rtl8811_rtl8812_rtl8814_rtl8821() {
 		echo "obj-\$(CONFIG_88XXAU) += rtl8812au/" >> "$kerneldir/drivers/net/wireless/Makefile"
 		sed -i '/source "drivers\/net\/wireless\/ti\/Kconfig"/a source "drivers\/net\/wireless\/rtl8812au\/Kconfig"' \
 			"$kerneldir/drivers/net/wireless/Kconfig"
+
+		# fix compilation for kernels >= 6.16
+		process_patch_file "${SRC}/patch/misc/wireless-rtl8812au-Fix-6.16.patch" "applying"
 	fi
 }
 
@@ -220,11 +223,11 @@ driver_xradio_xr819() {
 	if linux-version compare "${version}" ge 4.19 && [[ "$LINUXFAMILY" == sunxi* ]]; then
 
 		# Attach to specific commit (is branch:master)
-		local xradio_xr819_ver="commit:180aafb14191c78c1529d5a28ca58c7c9dcf2c55" # Commit date: Dec 6, 2024 (please update when updating commit ref)
+		local xradio_xr819_ver="commit:684a91a3692a964c5886dcf4369874cc7c19c0a4" # Commit date: Aug 7, 2025 (please update when updating commit ref)
 
 		display_alert "Adding" "Wireless drivers for Xradio XR819 chipsets" "info"
 
-		fetch_from_repo "$GITHUB_SOURCE/fifteenhex/xradio" "xradio" "${xradio_xr819_ver}" "yes" # https://github.com/fifteenhex/xradio
+		fetch_from_repo "$GITHUB_SOURCE/igorpecovnik/xradio" "xradio" "${xradio_xr819_ver}" "yes" # Forked from https://github.com/fifteenhex/xradio
 		cd "$kerneldir" || exit
 		rm -rf "$kerneldir/drivers/net/wireless/xradio"
 		mkdir -p "$kerneldir/drivers/net/wireless/xradio/"
@@ -255,6 +258,9 @@ driver_rtl8811CU_rtl8821C() {
 
 	if linux-version compare "${version}" ge 3.14; then
 
+		# deprecate this driver with 6.12+
+		# https://github.com/morrownr/8821cu-20210916/commit/945c687aa1e62ee0b95b1ddd1dbfdbd513c30152
+
 		# Attach to specific commit (is branch:main)
 		local rtl8811cuver="commit:d74134a1c68f59f2b80cdd6c6afb8c1a8a687cbf" # Commit date: 2025-05-08 (please update when updating commit ref)
 
@@ -288,6 +294,9 @@ driver_rtl8811CU_rtl8821C() {
 		echo "obj-\$(CONFIG_RTL8821CU) += rtl8811cu/" >> "$kerneldir/drivers/net/wireless/Makefile"
 		sed -i '/source "drivers\/net\/wireless\/ti\/Kconfig"/a source "drivers\/net\/wireless\/rtl8811cu\/Kconfig"' \
 			"$kerneldir/drivers/net/wireless/Kconfig"
+
+		# fix compilation for kernels >= 6.16
+		process_patch_file "${SRC}/patch/misc/wireless-rtl8811cu-Fix-6.16.patch" "applying"
 	fi
 }
 
@@ -297,6 +306,9 @@ driver_rtl88x2bu() {
 
 	if linux-version compare "${version}" ge 5.0; then
 
+		# deprecate this driver with 6.12+
+		# https://github.com/morrownr/88x2bu-20210702/commit/fe48647496798cac77976e310ee95da000b436c9
+
 		# Attach to specific commit (is branch:main)
 		local rtl88x2buver="commit:1ee13286e0b212c22946aa8d51aa7d84cb876cd4" # Commit date: 2025-05-06 (please update when updating commit ref)
 
@@ -327,6 +339,9 @@ driver_rtl88x2bu() {
 		sed -i "/source \"drivers\/net\/wireless\/ti\/Kconfig\"/a source \"drivers\/net\/wireless\/rtl88x2bu\/Kconfig\"" \
 			"$kerneldir/drivers/net/wireless/Kconfig"
 
+		# fix compilation for kernels >= 6.16
+		process_patch_file "${SRC}/patch/misc/wireless-rtl88x2bu-Fix-6.16.patch" "applying"
+
 	fi
 }
 
@@ -534,7 +549,7 @@ driver_uwe5622() {
 			fi
 		fi
 
-		if linux-version compare "${version}" ge 6.15; then
+		if linux-version compare "${version}" ge 6.16; then
 			process_patch_file "${SRC}/patch/misc/wireless-uwe5622/uwe5622-v6.16.patch" "applying"
 		fi
 	fi

lib/functions/configuration/main-config.sh

@@ -318,7 +318,8 @@ function do_main_configuration() {
 	esac
 
         # enable APA extension for Debian Unstable release
-        [ "$RELEASE" = "sid" ] && enable_extension "apa"
+	# loong64 is not supported now
+        [ "$RELEASE" = "sid" ] && [ "$ARCH" != "loong64" ] && enable_extension "apa"
 
 	## Extensions: at this point we've sourced all the config files that will be used,
 	##             and (hopefully) not yet invoked any extension methods. So this is the perfect
@@ -370,14 +371,16 @@ function do_extra_configuration() {
 	fi
 
 	DEBIAN_MIRROR='deb.debian.org/debian'
-	DEBIAN_SECURTY='security.debian.org/'
+	# loong64 is using debian-ports repo now
+	[[ "${ARCH}" == "loong64" ]] && DEBIAN_MIRROR='deb.debian.org/debian-ports'
+	DEBIAN_SECURITY='security.debian.org/'
 	[[ "${ARCH}" == "amd64" ]] &&
 		UBUNTU_MIRROR='archive.ubuntu.com/ubuntu/' ||
 		UBUNTU_MIRROR='ports.ubuntu.com/'
 
 	if [[ $DOWNLOAD_MIRROR == "china" ]]; then
 		DEBIAN_MIRROR='mirrors.tuna.tsinghua.edu.cn/debian'
-		DEBIAN_SECURTY='mirrors.tuna.tsinghua.edu.cn/debian-security'
+		DEBIAN_SECURITY='mirrors.tuna.tsinghua.edu.cn/debian-security'
 		[[ "${ARCH}" == "amd64" ]] &&
 			UBUNTU_MIRROR='mirrors.tuna.tsinghua.edu.cn/ubuntu/' ||
 			UBUNTU_MIRROR='mirrors.tuna.tsinghua.edu.cn/ubuntu-ports/'
@@ -385,7 +388,7 @@ function do_extra_configuration() {
 
 	if [[ $DOWNLOAD_MIRROR == "bfsu" ]]; then
 		DEBIAN_MIRROR='mirrors.bfsu.edu.cn/debian'
-		DEBIAN_SECURTY='mirrors.bfsu.edu.cn/debian-security'
+		DEBIAN_SECURITY='mirrors.bfsu.edu.cn/debian-security'
 		[[ "${ARCH}" == "amd64" ]] &&
 			UBUNTU_MIRROR='mirrors.bfsu.edu.cn/ubuntu/' ||
 			UBUNTU_MIRROR='mirrors.bfsu.edu.cn/ubuntu-ports/'

lib/functions/general/apt-utils.sh

@@ -39,6 +39,8 @@ function apt_find_upstream_package_version_and_download_url() {
 	fi
 
 	declare base_down_url="http://${mirror_with_slash}pool/main/${first_letter_of_sought_package_name}/${sought_package_name}"
+	# loong64 is using debian-ports repo, and download from pool-loong64
+	[[ "${ARCH}" == "loong64" ]] && declare base_down_url="http://${mirror_with_slash}pool-loong64/main/${first_letter_of_sought_package_name}/${sought_package_name}"
 
 	# get json with latest pacakge info generated by GHA
 	case "${GITHUB_MIRROR}" in

lib/functions/general/oci-oras.sh

@@ -52,6 +52,11 @@ function run_tool_oras() {
 			ORAS_ARCH="riscv64"
 			ORAS_VERSION="1.2.0-beta.1" # Only v1.2.0-beta.1+ has risv64 support
 			;;
+		*loongarch64*)
+			ORAS_ARCH="loong64"
+			ORAS_VERSION="1.3.0-beta.3-loong64" # Only v1.3.0-beta.3-loong64+ has loong64 support
+			ORAS_REPO="amazingfate" # This is my fork repo, we can delete it if oras releases official loong64 binary in the future
+			;;
 		*)
 			exit_with_error "unknown arch: $MACHINE"
 			;;
@@ -59,7 +64,7 @@ function run_tool_oras() {
 
 	declare ORAS_FN="oras_${ORAS_VERSION}_${ORAS_OS}_${ORAS_ARCH}"
 	declare ORAS_FN_TARXZ="${ORAS_FN}.tar.gz"
-	declare DOWN_URL="${GITHUB_SOURCE:-"https://github.com"}/oras-project/oras/releases/download/v${ORAS_VERSION}/${ORAS_FN_TARXZ}"
+	declare DOWN_URL="${GITHUB_SOURCE:-"https://github.com"}/${ORAS_REPO:-"oras-project"}/oras/releases/download/v${ORAS_VERSION}/${ORAS_FN_TARXZ}"
 	declare ORAS_BIN="${DIR_ORAS}/${ORAS_FN}"
 	declare ACTUAL_VERSION
 

lib/functions/general/shellcheck.sh

@@ -92,6 +92,11 @@ function run_tool_shellcheck() {
 			display_alert "No RISC-V riscv64 support for SHELLCHECK" "SHELLCHECK will not run" "wrn"
 			return 0
 			;;
+		*loongarch64*)
+			# check https://github.com/koalaman/shellcheck in the future, build might be possible
+			display_alert "No LoongArch support for SHELLCHECK" "SHELLCHECK will not run" "wrn"
+			return 0
+			;;
 		*)
 			exit_with_error "unknown arch: $MACHINE"
 			;;

lib/functions/host/docker.sh

@@ -593,7 +593,7 @@ function docker_cli_launch() {
 	local -i docker_build_result
 	if docker run "${DOCKER_ARGS[@]}" "${DOCKER_ARMBIAN_INITIAL_IMAGE_TAG}" /bin/bash "${DOCKER_ARMBIAN_TARGET_PATH}/compile.sh" "${ARMBIAN_CLI_FINAL_RELAUNCH_ARGS[@]}"; then
 		docker_build_result=$? # capture exit code of test done in the line above.
-		display_alert "-------------Docker run finished after ${SECONDS}s------------------------" "🐳 successfull" "info"
+		display_alert "-------------Docker run finished after ${SECONDS}s------------------------" "🐳 successful" "info"
 	else
 		docker_build_result=$? # capture exit code of test done 4 lines above.
 		# No use polluting GHA/CI with notices about Docker failure (real failure, inside Docker, generated enough errors already) skip_ci_special="yes"

lib/functions/host/host-release.sh

@@ -18,7 +18,7 @@ function obtain_and_check_host_release_and_arch() {
 
 	case "${HOSTARCH}" in
 		amd64 | arm64) ;; # officially supported
-		armhf | riscv64)  # experimental
+		armhf | riscv64 | loong64)  # experimental
 			display_alert "EXPERIMENTAL build host support" "${HOSTARCH}" "wrn"
 			;;
 		*)

lib/functions/host/prepare-host.sh

@@ -203,7 +203,6 @@ function adaptative_prepare_host_dependencies() {
 		udev # causes initramfs rebuild, but is usually pre-installed.
 		uuid-dev
 		zlib1g-dev
-		gcc-arm-linux-gnueabi # necessary for rockchip64 (and maybe other too) ATF compilation
 
 		# by-category below
 		file tree expect                         # logging utilities; expect is needed for 'unbuffer' command
@@ -256,7 +255,9 @@ function adaptative_prepare_host_dependencies() {
 	fi
 
 	if [[ "${wanted_arch}" == "arm64" || "${wanted_arch}" == "all" ]]; then
-		host_dependencies+=("gcc-aarch64-linux-gnu") # from crossbuild-essential-arm64
+		# gcc-aarch64-linux-gnu: from crossbuild-essential-arm64
+		# gcc-arm-linux-gnueabi: necessary for rockchip64 (and maybe other too) ATF compilation
+		host_dependencies+=("gcc-aarch64-linux-gnu" "gcc-arm-linux-gnueabi")
 	fi
 
 	if [[ "${wanted_arch}" == "armhf" || "${wanted_arch}" == "all" ]]; then
@@ -265,11 +266,15 @@ function adaptative_prepare_host_dependencies() {
 
 	if [[ "${wanted_arch}" == "riscv64" || "${wanted_arch}" == "all" ]]; then
 		host_dependencies+=("gcc-riscv64-linux-gnu") # crossbuild-essential-riscv64 is not even available "yet"
-		host_dependencies+=("debian-archive-keyring")
+	fi
+
+	if [[ "${wanted_arch}" == "loong64" ]]; then
+		host_dependencies+=("gcc-loongarch64-linux-gnu") # crossbuild-essential-loongarch64 is not even available "yet"
+		host_dependencies+=("debian-ports-archive-keyring")
 	fi
 
 	if [[ "${wanted_arch}" != "amd64" ]]; then
-		host_dependencies+=(libc6-amd64-cross) # Support for running x86 binaries (under qemu on other arches)
+		host_dependencies+=("libc6-amd64-cross") # Support for running x86 binaries (under qemu on other arches)
 	fi
 
 	if [[ "${KERNEL_COMPILER}" == "clang" ]]; then

lib/functions/rootfs/create-cache.sh

@@ -132,4 +132,4 @@ function extract_rootfs_artifact() {
 }
 
 # This comment strategically introduced to force a rebuild of all rootfs, as this file's contents are hashed into all rootfs versions.
-# Just a number to force rebuild 004
+# Just a number to force rebuild 005

lib/functions/rootfs/distro-agnostic.sh

@@ -296,6 +296,7 @@ function install_distribution_agnostic() {
 
 		if [[ "${KERNEL_HAS_WORKING_HEADERS:-"no"}" == "yes" ]]; then
 			if [[ $INSTALL_HEADERS == yes ]]; then # @TODO remove? might be a good idea to always install headers.
+				chroot_sdcard_apt_get_install "pahole"
 				install_artifact_deb_chroot "linux-headers"
 			fi
 		fi

lib/functions/rootfs/distro-specific.sh

@@ -89,17 +89,13 @@ function create_sources_list_and_deploy_repo_key() {
 			distro="debian"
 
 			declare -a suites=("${release}" "${release}-updates")
-			declare -a security_suites=("${release}-security")
 			declare -a components=(main contrib non-free)
 
-			if [[ "$release" == "buster" ]]; then
-				security_suites=("${release}/updates")
-			else
-			  suites+=("${release}-backports")
-			fi
-
 			if [[ "$release" != "buster" && "$release" != "bullseye" ]]; then
-			  components+=("non-free-firmware")
+				# EOS releases doesn't get security updates
+				declare -a security_suites=("${release}-security")
+				suites+=("${release}-backports")
+				components+=("non-free-firmware")
 			fi
 
 			cat <<- EOF > "${basedir}/etc/apt/sources.list.d/${distro}.sources"
@@ -108,25 +104,36 @@ function create_sources_list_and_deploy_repo_key() {
 			Suites: ${suites[@]}
 			Components: ${components[@]}
 			Signed-By: /usr/share/keyrings/debian-archive-keyring.gpg
-
-			Types: deb
-			URIs: http://${DEBIAN_SECURTY}
-			Suites: ${security_suites[@]}
-			Components: ${components[@]}
-			Signed-By: /usr/share/keyrings/debian-archive-keyring.gpg
 			EOF
+
+			if [ ${#security_suites[@]} -gt 0 ]; then
+				echo "" >> "${basedir}/etc/apt/sources.list.d/${distro}.sources" # it breaks if there is no line space in between
+				cat <<- EOF >> "${basedir}/etc/apt/sources.list.d/${distro}.sources"
+				Types: deb
+				URIs: http://${DEBIAN_SECURITY}
+				Suites: ${security_suites[@]}
+				Components: ${components[@]}
+				Signed-By: /usr/share/keyrings/debian-archive-keyring.gpg
+				EOF
+			fi
 			;;
 
 		sid | unstable)
 			distro="debian"
 
+			if [[ "${ARCH}" == loong64 ]]; then
+				# loong64 is using debian-ports repo, we can change it to default after debian supports it officially
+				keyring_filename=/usr/share/keyrings/debian-ports-archive-keyring.gpg
+			else
+				keyring_filename=/usr/share/keyrings/debian-archive-keyring.gpg
+			fi
 			# sid is permanent unstable development and has no such thing as updates or security
 			cat <<- EOF > "${basedir}/etc/apt/sources.list.d/${distro}.sources"
 			Types: deb
 			URIs: http://${DEBIAN_MIRROR}
 			Suites: ${release}
 			Components: main contrib non-free non-free-firmware
-			Signed-By: /usr/share/keyrings/debian-archive-keyring.gpg
+			Signed-By: ${keyring_filename}
 			EOF
 
 			# Required for some packages on riscv64.

lib/functions/rootfs/rootfs-create.sh

@@ -98,6 +98,8 @@ function create_new_rootfs_cache_via_debootstrap() {
 		"'--components=${AGGREGATED_DEBOOTSTRAP_COMPONENTS_COMMA}'" # from aggregation.py
 	)
 
+	# This is necessary to debootstrap from a non-official repo
+	[[ $ARCH == loong64 ]] && deboostrap_arguments+=("--keyring=/usr/share/keyrings/debian-ports-archive-keyring.gpg")
 	# Small detour for local apt caching option.
 	local_apt_deb_cache_prepare "before debootstrap" # sets LOCAL_APT_CACHE_INFO
 	if [[ "${LOCAL_APT_CACHE_INFO[USE]}" == "yes" ]]; then