mirror of
https://github.com/armbian/build
synced 2025-09-24 19:47:06 +07:00
e696c2eb3b
XpressReal(https://xpressreal.io/) is a family of Single Board Computers developed in collaboration between Fyde Innovations, Radxa and Realtek. XpressReal T3 is the first product in the family - a small form factor high performance single board computer powered by the Realtek RTD1619B, which runs FydeOS/openFyde and Linux! Now we are adding the awesome Armbian Linux support for XpressReal T3! This commit introduces some binary files that XpressReal T3 needed: - firmware/realtek/rtd1619b These binaries are the firmware for rtd1619b peripherals (including the audio decoder, video decoder, etc.). - u-boot-fw.tar.gz This contains some co-processor firmware, which needs to be loaded by u-boot in the early stage of boot. - u-boot-prebuilt.tar.gz These are hwsettings related files, used for tasks such as DDR initialization. These files come from the rtd1619b SDK, which has already been open-sourced on our github: - [firmware](https://github.com/XpressReal/linux-sdk/tree/main/meta-xpressreal/recipes-kernel/linux-firmware/files/rtd1619b) - [u-boot prebuilts](https://github.com/XpressReal/linux-sdk/tree/main/meta-xpressreal/recipes-bsp/u-boot/files/prebuilt/rtd1619b)
49 lines
2.2 KiB
Batchfile
49 lines
2.2 KiB
Batchfile
setenv load_addr "0x09000000"
|
|
setenv kernel_addr_r "0x08000000"
|
|
setenv ramdisk_addr_r "0x20000000"
|
|
setenv fdt_addr_r "0x02100000"
|
|
|
|
setenv rootfstype "ext4"
|
|
setenv rootdev "/dev/mmcblk0p1"
|
|
setenv fdtfile "realtek/rtd1619b-bleedingedge-4gb.dtb"
|
|
|
|
setenv console "both"
|
|
setenv bootlogo "false"
|
|
setenv verbosity "1"
|
|
setenv earlycon "off"
|
|
setenv docker_optimizations "off"
|
|
setenv extraboardargs "uio_pdrv_genirq.of_id=generic-uio firmware_class.path=/lib/firmware/realtek/rtd1619b/ pd_ignore_unused clk_ignore_unused video=HDMI-A-1:1920x1080@30"
|
|
|
|
test -n "${distro_bootpart}" || distro_bootpart=1
|
|
echo "Boot script loaded from ${devtype} ${devnum}:${distro_bootpart}"
|
|
|
|
if test -e ${devtype} ${devnum}:${distro_bootpart} ${prefix}armbianEnv.txt; then
|
|
load ${devtype} ${devnum}:${distro_bootpart} ${load_addr} ${prefix}armbianEnv.txt
|
|
env import -t ${load_addr} ${filesize}
|
|
fi
|
|
|
|
if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
|
|
if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,460800 ${consoleargs}"; fi
|
|
if test "${earlycon}" = "on"; then setenv consoleargs "earlycon=uart8250,mmio32,0x98007800 ${consoleargs}"; fi
|
|
if test "${bootlogo}" = "true"; then
|
|
setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
|
|
else
|
|
setenv consoleargs "splash=verbose ${consoleargs}"
|
|
fi
|
|
|
|
# get PARTUUID of first partition on SD/eMMC the boot script was loaded from
|
|
if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:${distro_bootpart} partuuid; fi
|
|
|
|
setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
|
|
|
|
if test "${docker_optimizations}" = "on"; then setenv bootargs "${bootargs} cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory"; fi
|
|
|
|
load ${devtype} ${devnum}:${distro_bootpart} ${kernel_addr_r} ${prefix}Image
|
|
load ${devtype} ${devnum}:${distro_bootpart} ${ramdisk_addr_r} ${prefix}uInitrd
|
|
load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}dtb/${fdtfile}
|
|
|
|
booti ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
|
|
|
|
# Recompile with:
|
|
# mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr
|