mirror of
https://github.com/armbian/build
synced 2025-09-24 19:47:06 +07:00
26e253b4ad
- similar toe9708b8c33, but for the Blade3 - this revertsd048673c00just for the Blade3 - there is little to be gained from .10 anyway on those machines (IMHO) - it is still vendor 2017.09 after all, dunno why Radxa calls them "2024.x"
28 lines
1.8 KiB
Plaintext
28 lines
1.8 KiB
Plaintext
# Rockchip RK3588 SoC octa core 16GB 4x PCIe Gen3 HDMI USB3 DP HDMIrx eMMC SD PD Mini-PCIe
|
|
declare -g BOARD_NAME="Mixtile Blade 3"
|
|
declare -g BOARDFAMILY="rockchip-rk3588"
|
|
declare -g BOARD_MAINTAINER="rpardini"
|
|
declare -g KERNEL_TARGET="vendor,edge"
|
|
declare -g BOOT_FDT_FILE="rockchip/rk3588-blade3-v101-linux.dtb" # Included in https://github.com/armbian/linux-rockchip/pull/64 # has a hook to change it for edge below
|
|
declare -g BOOT_SCENARIO="spl-blobs" # so we don't depend on defconfig naming convention
|
|
declare -g BOOT_SOC="rk3588" # so we don't depend on defconfig naming convention
|
|
declare -g BOOTCONFIG="blade3_defconfig" # there is also blade3_sata_defconfig available
|
|
declare -g IMAGE_PARTITION_TABLE="gpt"
|
|
declare -g UEFI_EDK2_BOARD_ID="blade3" # This _only_ used for uefi-edk2-rk3588 extension
|
|
|
|
# Vendor u-boot; use the default family (rockchip-rk3588) u-boot. See config/sources/families/rockchip-rk3588.conf
|
|
function post_family_config__vendor_uboot_mekotronics() {
|
|
display_alert "$BOARD" "Configuring $BOARD vendor u-boot (using Radxa's older next-dev-v2024.03)" "info"
|
|
declare -g BOOTDELAY=1 # build injects this into u-boot config. we can then get into UMS mode and avoid the whole rockusb/rkdeveloptool thing
|
|
|
|
# Override the stuff from rockchip-rk3588 family; Meko's have a patch for stable MAC address that breaks with Radxa's next-dev-v2024.10+
|
|
declare -g BOOTSOURCE='https://github.com/radxa/u-boot.git'
|
|
declare -g BOOTBRANCH='branch:next-dev-v2024.03' # NOT next-dev-v2024.10
|
|
declare -g BOOTPATCHDIR="legacy/u-boot-radxa-rk35xx"
|
|
}
|
|
|
|
function post_family_config_branch_edge__different_dtb_for_edge() {
|
|
declare -g BOOT_FDT_FILE="rockchip/rk3588-mixtile-blade3.dtb"
|
|
display_alert "$BOARD" "Using ${BOOT_FDT_FILE} for ${BRANCH}" "info"
|
|
}
|