Revert "linux-rk35xx-vendor: Add and enable LTE em05 driver ( Enables support…"

This reverts commit a6cfb44448.

.github/CODEOWNERS

@@ -120,7 +120,6 @@ config/boards/orangepizero3.csc		@alexl83 @chraac
 config/boards/orangepizeroplus.csc		@schwar3kat
 config/boards/phytiumpi.conf		@chainsx
 config/boards/pine64.conf		@PanderMusubi
-config/boards/pinebook-a64.csc		@Qvy-png
 config/boards/pinebook-pro.csc		@TRSx80 @ahoneybun
 config/boards/pocketbeagle2.conf		@Grippy98
 config/boards/pocketchip-sd.csc		@TheSnowfield
@@ -197,7 +196,7 @@ config/kernel/linux-spacemit-*.config		@pyavitz
 config/kernel/linux-starfive2-*.config		@libiunc
 config/kernel/linux-sun55iw3-syterkit-*.config		@chainsx
 config/kernel/linux-sunxi-*.config		@1ubuntuuser @AaronNGray @DylanHP @Janmcha @StephenGraf @TheSnowfield @Tonymac32 @janprunk @lbmendes @leggewie @mhawkins-consultant @sgjava @spendist
-config/kernel/linux-sunxi64-*.config		@AGM1968 @IsMrX @JohnTheCoolingFan @Kreyren @PanderMusubi @Qvy-png @Ressetkk @The-going @Tonymac32 @alexl83 @chraac @devdotnetorg @eliasbakken @igorpecovnik @krachlatte @pyavitz @schwar3kat @sicXnull @spendist @teknoid
+config/kernel/linux-sunxi64-*.config		@AGM1968 @IsMrX @JohnTheCoolingFan @Kreyren @PanderMusubi @Ressetkk @The-going @Tonymac32 @alexl83 @chraac @devdotnetorg @eliasbakken @igorpecovnik @krachlatte @pyavitz @schwar3kat @sicXnull @spendist @teknoid
 config/kernel/linux-thead-*.config		@chainsx
 config/kernel/linux-tqma-*.config		@schmiedelm
 config/kernel/linux-uefi-arm64-*.config		@rpardini
@@ -216,7 +215,7 @@ patch/atf/atf-sm8250/		@FantasyGmm @amazingfate
 patch/atf/atf-sm8550/		@FantasyGmm
 patch/atf/atf-spacemit/		@pyavitz
 patch/atf/atf-sun55iw3-syterkit/		@chainsx
-patch/atf/atf-sunxi64/		@AGM1968 @IsMrX @JohnTheCoolingFan @Kreyren @PanderMusubi @Qvy-png @Ressetkk @The-going @Tonymac32 @alexl83 @chraac @devdotnetorg @eliasbakken @igorpecovnik @krachlatte @pyavitz @schwar3kat @sicXnull @spendist @teknoid
+patch/atf/atf-sunxi64/		@AGM1968 @IsMrX @JohnTheCoolingFan @Kreyren @PanderMusubi @Ressetkk @The-going @Tonymac32 @alexl83 @chraac @devdotnetorg @eliasbakken @igorpecovnik @krachlatte @pyavitz @schwar3kat @sicXnull @spendist @teknoid
 patch/atf/atf-wsl2-arm64/		@rpardini
 patch/kernel/archive/bcm2711-*/		@PanderMusubi @teknoid
 patch/kernel/archive/imx8m-*/		@schmiedelm
@@ -232,7 +231,7 @@ patch/kernel/archive/rockchip64-*/		@150balbes @ColorfulRhino @HeyMeco @JohnTheC
 patch/kernel/archive/sm8250-*/		@FantasyGmm @amazingfate
 patch/kernel/archive/sm8550-*/		@FantasyGmm
 patch/kernel/archive/spacemit-*/		@pyavitz
-patch/kernel/archive/sunxi-*/		@1ubuntuuser @AGM1968 @AaronNGray @DylanHP @IsMrX @Janmcha @JohnTheCoolingFan @Kreyren @PanderMusubi @Qvy-png @Ressetkk @StephenGraf @The-going @TheSnowfield @Tonymac32 @alexl83 @chraac @devdotnetorg @eliasbakken @igorpecovnik @janprunk @krachlatte @lbmendes @leggewie @mhawkins-consultant @pyavitz @schwar3kat @sgjava @sicXnull @spendist @teknoid
+patch/kernel/archive/sunxi-*/		@1ubuntuuser @AGM1968 @AaronNGray @DylanHP @IsMrX @Janmcha @JohnTheCoolingFan @Kreyren @PanderMusubi @Ressetkk @StephenGraf @The-going @TheSnowfield @Tonymac32 @alexl83 @chraac @devdotnetorg @eliasbakken @igorpecovnik @janprunk @krachlatte @lbmendes @leggewie @mhawkins-consultant @pyavitz @schwar3kat @sgjava @sicXnull @spendist @teknoid
 patch/kernel/archive/uefi-arm64-*/		@PeterChrz @rpardini
 patch/kernel/archive/uefi-x86-*/		@davidandreoletti @rpardini
 patch/kernel/archive/wsl2-arm64-*/		@rpardini
@@ -258,8 +257,8 @@ patch/u-boot/u-boot-qemu-arm64/		@rpardini
 patch/u-boot/u-boot-qemu-x86/		@rpardini
 patch/u-boot/u-boot-rockchip64-v2022.04/		@TRSx80 @ahoneybun @paolosabatino
 patch/u-boot/u-boot-rockchip64/		@Tonymac32 @andyshrk @clee @igorpecovnik @prahal @redrathnure @sicXnull
-patch/u-boot/u-boot-sunxi-crust/		@AGM1968 @Kreyren @PanderMusubi @Qvy-png @Tonymac32 @devdotnetorg @igorpecovnik @schwar3kat @spendist @teknoid
-patch/u-boot/u-boot-sunxi/		@1ubuntuuser @AGM1968 @DylanHP @Janmcha @JohnTheCoolingFan @Kreyren @PanderMusubi @Qvy-png @Ressetkk @StephenGraf @TheSnowfield @Tonymac32 @devdotnetorg @eliasbakken @igorpecovnik @janprunk @krachlatte @lbmendes @leggewie @mhawkins-consultant @schwar3kat @sgjava @sicXnull @spendist @teknoid
+patch/u-boot/u-boot-sunxi-crust/		@AGM1968 @Kreyren @PanderMusubi @Tonymac32 @devdotnetorg @igorpecovnik @schwar3kat @spendist @teknoid
+patch/u-boot/u-boot-sunxi/		@1ubuntuuser @AGM1968 @DylanHP @Janmcha @JohnTheCoolingFan @Kreyren @PanderMusubi @Ressetkk @StephenGraf @TheSnowfield @Tonymac32 @devdotnetorg @eliasbakken @igorpecovnik @janprunk @krachlatte @lbmendes @leggewie @mhawkins-consultant @schwar3kat @sgjava @sicXnull @spendist @teknoid
 patch/u-boot/u-boot-sunxi/board_bananapim3/		@AaronNGray
 patch/u-boot/u-boot-tqma/		@schmiedelm
 patch/u-boot/v2022.01/		@teknoid
@@ -306,7 +305,7 @@ sources/families/sm8250.conf		@FantasyGmm @amazingfate
 sources/families/sm8550.conf		@FantasyGmm
 sources/families/spacemit.conf		@pyavitz
 sources/families/starfive2.conf		@libiunc
-sources/families/sun50iw1.conf		@Kreyren @PanderMusubi @Qvy-png @devdotnetorg @eliasbakken
+sources/families/sun50iw1.conf		@Kreyren @PanderMusubi @devdotnetorg @eliasbakken
 sources/families/sun50iw2.conf		@AGM1968 @Tonymac32 @schwar3kat @spendist @teknoid
 sources/families/sun50iw6.conf		@igorpecovnik
 sources/families/sun50iw9-bpi.conf		@The-going @pyavitz

.github/workflows/pr-kernel-security-analysis.yml

@@ -34,7 +34,7 @@ jobs:
 
       - name: Get changed files
         id: changed-files
-        uses: tj-actions/changed-files@2036da178f85576f1940fedb74bb93a36cd89ab7 # v46.0.3
+        uses: tj-actions/changed-files@f963b3f3562b00b6d2dd25efc390eb04e51ef6c6 # v46.0.3
 
       - name: Checkout repository
         uses: actions/checkout@v5

.github/workflows/pr-lint-scripts.yml

@@ -30,7 +30,7 @@ jobs:
 
       - name: Get changed files
         id: changed-files
-        uses: tj-actions/changed-files@2036da178f85576f1940fedb74bb93a36cd89ab7 # v46.0.3
+        uses: tj-actions/changed-files@f963b3f3562b00b6d2dd25efc390eb04e51ef6c6 # v46.0.3
 
       - name: List all changed files
         run: |

config/boards/bananapi.conf

@@ -3,7 +3,7 @@ BOARD_NAME="Banana Pi"
 BOARDFAMILY="sun7i"
 BOARD_MAINTAINER="DylanHP janprunk"
 BOOTCONFIG="Bananapi_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 
 function post_config_uboot_target__extra_configs_for_bananapi() {

config/boards/bananapim1plus.csc

@@ -3,5 +3,5 @@ BOARD_NAME="Banana Pi M1+"
 BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="bananapi_m1_plus_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/bananapim2.eos

@@ -4,5 +4,5 @@ BOARDFAMILY="sun6i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Sinovoip_BPI_M2_defconfig"
 OVERLAY_PREFIX="sun6i-a31s"
-KERNEL_TARGET="current,legacy"
+KERNEL_TARGET="legacy,current"
 KERNEL_TEST_TARGET="current"

config/boards/bananapim2plus.conf

@@ -7,5 +7,5 @@ DEFAULT_OVERLAYS="analog-codec"
 MODULES_CURRENT="g_serial"
 MODULES_LEGACY="g_serial"
 SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/bananapim2ultra.csc

@@ -4,5 +4,5 @@ BOARDFAMILY="sun8i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Bananapi_M2_Ultra_defconfig"
 OVERLAY_PREFIX="sun8i-r40"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/bananapim2zero.csc

@@ -6,5 +6,5 @@ BOOTCONFIG="bananapi_m2_zero_defconfig"
 MODULES_LEGACY="g_serial"
 MODULES_CURRENT="g_serial"
 SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/bananapim3.csc

@@ -4,7 +4,7 @@ BOARDFAMILY="sun8i"
 BOARD_MAINTAINER="AaronNGray"
 BOOTCONFIG="Sinovoip_BPI_M3_defconfig"
 OVERLAY_PREFIX="sun8i-a83t"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 
 BOOTBRANCH="tag:v2024.01"

config/boards/bananapim64.csc

@@ -4,6 +4,6 @@ BOARDFAMILY="sun50iw1"
 BOARD_MAINTAINER="devdotnetorg"
 BOOTCONFIG_DEFAULT="sun50iw1p1_config"
 BOOTCONFIG="bananapi_m64_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="a64_defconfig"

config/boards/bananapipro.csc

@@ -3,7 +3,7 @@ BOARD_NAME="Banana Pi Pro"
 BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Bananapro_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 
 function post_config_uboot_target__extra_configs_for_bananapipro() {

config/boards/beelinkx2.tvb

@@ -3,5 +3,5 @@ BOARD_NAME="Beelink X2"
 BOARDFAMILY="sun8i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="beelink_x2_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/cubieboard.csc

@@ -4,7 +4,7 @@ BOARDFAMILY="sun4i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Cubieboard_config"
 HAS_VIDEO_OUTPUT="no"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 MODULES_BLACKLIST="ir_lirc_codec lirc_dev sunxi-cir"
 

config/boards/cubieboard2.csc

@@ -3,7 +3,7 @@ BOARD_NAME="Cubieboard 2"
 BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Cubieboard2_config"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 
 function post_config_uboot_target__extra_configs_for_cubieboard2() {

config/boards/cubieboard4.csc

@@ -3,5 +3,5 @@ BOARD_NAME="Cubieboard 4"
 BOARDFAMILY="sun9i"
 BOARD_MAINTAINER=""
 BOOTCONFIG=Cubieboard4_defconfig
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/cubietruck.csc

@@ -3,5 +3,5 @@ BOARD_NAME="Cubietruck"
 BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Cubietruck_config"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/cubietruckplus.eos

@@ -4,4 +4,4 @@ BOARDFAMILY="sun8i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Cubietruck_plus_defconfig"
 OVERLAY_PREFIX="sun8i-a83t"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"

config/boards/imx7sabre.eos

@@ -3,4 +3,4 @@ BOARD_NAME="MCIMX7SABRE"
 BOARDFAMILY="imx7d"
 BOARD_MAINTAINER=""
 BOOTCONFIG="imx_v7_defconfig"
-KERNEL_TARGET="current,legacy"
+KERNEL_TARGET="legacy,current"

config/boards/licheepi-4a.eos

@@ -2,7 +2,7 @@
 BOARD_NAME="LicheePi 4A"
 BOARDFAMILY="thead"
 BOARD_MAINTAINER="chainsx"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 BOOT_FDT_FILE="thead/th1520-lichee-pi-4a.dtb"
 SRC_EXTLINUX="yes"

config/boards/lime-a33.csc

@@ -5,5 +5,5 @@ BOARD_MAINTAINER=""
 HAS_VIDEO_OUTPUT="no"
 BOOTCONFIG="A33-OLinuXino_defconfig"
 OVERLAY_PREFIX="sun8i-a33"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/lime-a64.csc

@@ -4,7 +4,7 @@ BOARDFAMILY="sun50iw1"
 BOARD_MAINTAINER=""
 BOOTCONFIG_DEFAULT="sun50iw1p1_config"
 BOOTCONFIG="a64-olinuxino_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 CRUSTCONFIG="a64_defconfig"

config/boards/lime.csc

@@ -3,5 +3,5 @@ BOARD_NAME="A20 OLinuXino Lime"
 BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="A20-OLinuXino-Lime_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/lime2.csc

@@ -3,7 +3,7 @@ BOARD_NAME="A20 OLinuXino Lime 2"
 BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="A20-OLinuXino-Lime2-eMMC_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 
 function post_config_uboot_target__extra_configs_for_lime2() {

config/boards/melea1000.csc

@@ -4,5 +4,5 @@ BOARDFAMILY="sun4i"
 BOARD_MAINTAINER=""
 HAS_VIDEO_OUTPUT="no"
 BOOTCONFIG="Mele_A1000_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/mk808c.csc

@@ -4,5 +4,5 @@ BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 HAS_VIDEO_OUTPUT="no"
 BOOTCONFIG="MK808C_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/nanopi-r1.csc

@@ -9,7 +9,7 @@ DEFAULT_OVERLAYS="usbhost0 usbhost1 uart1"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS1,ttyGS0"
 HAS_VIDEO_OUTPUT="no"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 BOOT_FDT_FILE="sun8i-h3-nanopi-r1.dtb"
 

config/boards/nanopi-r1s-h5.csc

@@ -8,7 +8,7 @@ MODULES_BLACKLIST="lima"
 DEFAULT_OVERLAYS="usbhost1 usbhost2"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 HAS_VIDEO_OUTPUT="no"
 CRUSTCONFIG="h5_defconfig"

config/boards/nanopia64.csc

@@ -3,7 +3,7 @@ BOARD_NAME="NanoPi A64"
 BOARDFAMILY="sun50iw1"
 BOARD_MAINTAINER=""
 BOOTCONFIG="nanopi_a64_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 CRUSTCONFIG="a64_defconfig"

config/boards/nanopiair.csc

@@ -9,5 +9,5 @@ DEFAULT_OVERLAYS="usbhost2 usbhost3"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
 HAS_VIDEO_OUTPUT="no"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/nanopiduo.csc

@@ -9,5 +9,5 @@ DEFAULT_OVERLAYS="usbhost2 usbhost3"
 DEFAULT_CONSOLE="serial"
 HAS_VIDEO_OUTPUT="no"
 SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/nanopiduo2.csc

@@ -9,7 +9,7 @@ DEFAULT_OVERLAYS="usbhost0 usbhost2 usbhost3"
 DEFAULT_CONSOLE="serial"
 HAS_VIDEO_OUTPUT="no"
 SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 BOOT_FDT_FILE="sun8i-h3-nanopi-duo2.dtb"
 CRUSTCONFIG="nanopi_m1_plus_defconfig"

config/boards/nanopik1plus.csc

@@ -4,6 +4,6 @@ BOARDFAMILY="sun50iw2"
 BOARD_MAINTAINER=""
 BOOTCONFIG="nanopi_k1_plus_defconfig"
 DEFAULT_OVERLAYS="analog-codec"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="h5_defconfig"

config/boards/nanopim1.eos

@@ -6,5 +6,5 @@ BOOTCONFIG="nanopi_m1_defconfig"
 MODULES_LEGACY="g_serial"
 MODULES_CURRENT="g_serial"
 SERIALCON="ttyS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 

config/boards/nanopim1plus.eos

@@ -6,7 +6,7 @@ BOOTCONFIG="nanopi_m1_plus_defconfig"
 MODULES_LEGACY="g_serial"
 MODULES_CURRENT="g_serial"
 SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 
 function post_config_uboot_target__extra_configs_for_nanopi_m1_plus() {
 	display_alert "$BOARD" "set dram clock" "info"

config/boards/nanopim1plus2.eos

@@ -3,5 +3,5 @@ BOARD_NAME="Nanopi M1 Plus 2"
 BOARDFAMILY="sun50iw2"
 BOARD_MAINTAINER=""
 BOOTCONFIG="nanopi_m1_plus2_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 CRUSTCONFIG="h5_defconfig"

config/boards/nanopineo.csc

@@ -9,5 +9,5 @@ DEFAULT_OVERLAYS="usbhost1 usbhost2"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
 HAS_VIDEO_OUTPUT="no"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/nanopineo2.csc

@@ -9,6 +9,6 @@ DEFAULT_OVERLAYS="usbhost1 usbhost2"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
 HAS_VIDEO_OUTPUT="no"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="h5_defconfig"

config/boards/nanopineo2black.csc

@@ -9,6 +9,6 @@ DEFAULT_OVERLAYS="usbhost1 usbhost2"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS1,ttyGS0"
 HAS_VIDEO_OUTPUT="no"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="h5_defconfig"

config/boards/nanopineocore2.csc

@@ -9,6 +9,6 @@ DEFAULT_OVERLAYS="usbhost1 usbhost2"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
 HAS_VIDEO_OUTPUT="no"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="h5_defconfig"

config/boards/nanopineoplus2.csc

@@ -9,7 +9,7 @@ DEFAULT_OVERLAYS="usbhost1 usbhost2"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
 HAS_VIDEO_OUTPUT="no"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="h5_defconfig"
 

config/boards/olimex-a20-olinuxino-micro.csc

@@ -3,5 +3,5 @@ BOARD_NAME="A20 OLinuXino Micro"
 BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="A20-OLinuXino_MICRO-eMMC_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/olimex-teres-a64.csc

@@ -6,7 +6,7 @@ BOARDFAMILY="sun50iw1"
 
 BOARD_MAINTAINER="Kreyren"
 
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 
 # NOTE(Krey): IMAGE_PARTITION_TABLE="gpt" was not tested, uses msdos by default

config/boards/olinux-som-a13.csc

@@ -4,5 +4,5 @@ BOARDFAMILY="sun5i"
 BOARD_MAINTAINER=""
 HAS_VIDEO_OUTPUT="no"
 BOOTCONFIG="A13-OLinuXino_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/orangepi-r1.csc

@@ -9,5 +9,5 @@ MODULES_BLACKLIST="lima sunxi_cedrus"
 HAS_VIDEO_OUTPUT="no"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/orangepi.eos

@@ -3,7 +3,7 @@ BOARD_NAME="Orange Pi"
 BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Orangepi_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 
 function post_config_uboot_target__extra_configs_for_orangepi() {
 	display_alert "$BOARD" "set dram clock" "info"

config/boards/orangepi2.csc

@@ -3,5 +3,5 @@ BOARD_NAME="Orange Pi 2"
 BOARDFAMILY="sun8i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="orangepi_2_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/orangepi3-lts.csc

@@ -4,7 +4,7 @@ BOARDFAMILY="sun50iw6"
 BOARD_MAINTAINER=""
 BOOTCONFIG="orangepi_3_lts_defconfig"
 BOOT_LOGO="desktop"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="orangepi_3_lts_defconfig"
 

config/boards/orangepi3.csc

@@ -3,7 +3,7 @@ BOARD_NAME="Orange Pi 3"
 BOARDFAMILY="sun50iw6"
 BOARD_MAINTAINER=""
 BOOTCONFIG="orangepi_3_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 CRUSTCONFIG="orangepi_3_defconfig"

config/boards/orangepilite.csc

@@ -5,7 +5,7 @@ BOARD_MAINTAINER=""
 BOOTCONFIG="orangepi_lite_defconfig"
 MODULES_LEGACY="g_serial"
 MODULES_CURRENT="g_serial"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 
 function post_config_uboot_target__extra_configs_for_orangepi_lite() {

config/boards/orangepilite2.csc

@@ -3,6 +3,6 @@ BOARD_NAME="Orange Pi Lite 2"
 BOARDFAMILY="sun50iw6"
 BOARD_MAINTAINER=""
 BOOTCONFIG="orangepi_lite2_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="orangepi_3_lts_defconfig"

config/boards/orangepimini.eos

@@ -3,7 +3,7 @@ BOARD_NAME="Orange Pi Mini"
 BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Orangepi_mini_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 
 function post_config_uboot_target__extra_configs_for_orangepi_mini() {
 	display_alert "$BOARD" "set dram clock" "info"

config/boards/orangepione.conf

@@ -3,7 +3,7 @@ BOARD_NAME="Orange Pi One"
 BOARDFAMILY="sun8i"
 BOARD_MAINTAINER="StephenGraf"
 BOOTCONFIG="orangepi_one_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 
 function post_config_uboot_target__extra_configs_for_orangepi_one() {

config/boards/orangepioneplus.csc

@@ -3,6 +3,6 @@ BOARD_NAME="Orange Pi One+"
 BOARDFAMILY="sun50iw6"
 BOARD_MAINTAINER=""
 BOOTCONFIG="orangepi_one_plus_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="orangepi_3_lts_defconfig"

config/boards/orangepipc.csc

@@ -3,5 +3,5 @@ BOARD_NAME="Orange Pi PC"
 BOARDFAMILY="sun8i"
 BOARD_MAINTAINER="lbmendes"
 BOOTCONFIG="orangepi_pc_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/orangepipc2.csc

@@ -3,7 +3,7 @@ BOARD_NAME="Orange Pi PC2"
 BOARDFAMILY="sun50iw2"
 BOARD_MAINTAINER=""
 BOOTCONFIG="orangepi_pc2_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 CRUSTCONFIG="h5_defconfig"

config/boards/orangepipcplus.csc

@@ -3,5 +3,5 @@ BOARD_NAME="Orange Pi PC +"
 BOARDFAMILY="sun8i"
 BOARD_MAINTAINER="Janmcha"
 BOOTCONFIG="orangepi_pc_plus_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/orangepiplus.csc

@@ -3,7 +3,7 @@ BOARD_NAME="Orange Pi+"
 BOARDFAMILY="sun8i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="orangepi_plus_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 
 function post_config_uboot_target__extra_configs_for_orangepi_plus() {

config/boards/orangepiplus2e.csc

@@ -3,7 +3,7 @@ BOARD_NAME="Orange Pi+ 2E"
 BOARDFAMILY="sun8i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="orangepi_plus2e_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="legacy"
 FULL_DESKTOP="yes"
 

config/boards/orangepiprime.csc

@@ -4,7 +4,7 @@ BOARDFAMILY="sun50iw2"
 BOARD_MAINTAINER=""
 BOOTCONFIG="orangepi_prime_defconfig"
 DEFAULT_OVERLAYS="analog-codec"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 CRUSTCONFIG="orangepi_pc2_defconfig"

config/boards/orangepiwin.csc

@@ -3,6 +3,6 @@ BOARD_NAME="Orange Pi Win"
 BOARDFAMILY="sun50iw1"
 BOARD_MAINTAINER=""
 BOOTCONFIG="orangepi_win_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="a64_defconfig"

config/boards/orangepizero.csc

@@ -9,7 +9,7 @@ DEFAULT_OVERLAYS="usbhost2 usbhost3 tve"
 DEFAULT_CONSOLE="both"
 HAS_VIDEO_OUTPUT="yes"
 SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 # CRUSTCONFIG="orangepi_zero_defconfig" # Crust is failing https://github.com/armbian/build/issues/8197
 

config/boards/orangepizeroplus.csc

@@ -9,6 +9,6 @@ MODULES_BLACKLIST="lima"
 SERIALCON="ttyS0,ttyGS0"
 DEFAULT_OVERLAYS="usbhost2 usbhost3"
 HAS_VIDEO_OUTPUT="no"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="h5_defconfig"

config/boards/orangepizeroplus2-h3.csc

@@ -7,5 +7,5 @@ MODULES_LEGACY="g_serial"
 MODULES_CURRENT="g_serial"
 DEFAULT_OVERLAYS="usbhost2 usbhost3"
 SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/orangepizeroplus2-h5.csc

@@ -8,7 +8,7 @@ MODULES_CURRENT="g_serial"
 DEFAULT_OVERLAYS="gpio-regulator-1.3v usbhost2 usbhost3"
 HAS_VIDEO_OUTPUT="no"
 SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="h5_defconfig"
 

config/boards/pcduino3.csc

@@ -3,7 +3,7 @@ BOARD_NAME="pcDuino 3"
 BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Linksprite_pcDuino3_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 
 function post_config_uboot_target__extra_configs_for_pcDuino3() {

config/boards/pcduino3nano.eos

@@ -3,4 +3,4 @@ BOARD_NAME="pcDuino3 Nano"
 BOARDFAMILY="sun7i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="Linksprite_pcDuino3_Nano_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"

config/boards/phytiumpi.conf

@@ -2,7 +2,7 @@
 BOARD_NAME="Phytium Pi"
 BOARDFAMILY="phytium-embedded"
 BOARD_MAINTAINER="chainsx"
-KERNEL_TARGET="current,legacy"
+KERNEL_TARGET="legacy,current"
 KERNEL_TEST_TARGET="current"
 BOOT_FDT_FILE="phytium/phytiumpi_firefly.dtb"
 FULL_DESKTOP="yes"

config/boards/pine64.conf

@@ -3,7 +3,7 @@ BOARD_NAME="Pine64"
 BOARDFAMILY="sun50iw1"
 BOARD_MAINTAINER="PanderMusubi"
 BOOTCONFIG="pine64_plus_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 CRUSTCONFIG="a64_defconfig"

config/boards/pine64so.csc

@@ -3,7 +3,7 @@ BOARD_NAME="SoPine A64"
 BOARDFAMILY="sun50iw1"
 BOARD_MAINTAINER=""
 BOOTCONFIG="sopine_baseboard_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 CRUSTCONFIG="a64_defconfig"

config/boards/pinebook-a64.csc

@@ -1,9 +1,9 @@
 # Allwinner A64 quad core 2GB RAM SoC WiFi/BT
 BOARD_NAME="Pinebook A64"
 BOARDFAMILY="sun50iw1"
-BOARD_MAINTAINER="Qvy-png"
+BOARD_MAINTAINER=""
 BOOTCONFIG="pinebook_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 BOOT_LOGO="desktop"

config/boards/pinecube.csc

@@ -2,7 +2,7 @@
 BOARD_NAME="Pine Cube"
 BOARDFAMILY="sun8i-v3s"
 BOARD_MAINTAINER=""
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 BOOTCONFIG="pinecube_defconfig"
 HAS_VIDEO_OUTPUT="no"

config/boards/pineh64-b.csc

@@ -3,7 +3,7 @@ BOARD_NAME="Pine H64 model B"
 BOARDFAMILY="sun50iw6"
 BOARD_MAINTAINER=""
 BOOTCONFIG="pine_h64_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 BOOT_FDT_FILE="sun50i-h6-pine-h64-model-b.dtb"
 CRUSTCONFIG="h6_defconfig"

config/boards/pineh64.csc

@@ -3,6 +3,6 @@ BOARD_NAME="Pine H64"
 BOARDFAMILY="sun50iw6"
 BOARD_MAINTAINER=""
 BOOTCONFIG="pine_h64_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="h6_defconfig"

config/boards/qcom-robotics-rb5.conf

@@ -0,0 +1,123 @@
+# Qualcomm Robotics RB5 Configuration
+declare -g BOARD_NAME="Qualcomm Robotics RB5"
+declare -g BOARD_MAINTAINER="FantasyGmm"
+declare -g BOARDFAMILY="sm8250"
+declare -g KERNEL_TARGET="current,edge"
+declare -g KERNEL_TEST_TARGET="edge"
+declare -g EXTRAWIFI="no"
+declare -g BOOTCONFIG="none"
+declare -g IMAGE_PARTITION_TABLE="gpt"
+# Reserve for ABL Boot
+# declare -g BOOTIMG_CMDLINE_EXTRA="clk_ignore_unused pd_ignore_unused console=tty0 console=ttyMSM0,1500000n8 pcie_pme=nomsi panic=30 allow_mismatched_32bit_el0 mem_sleep_default=s2idle"
+# declare -g -a ABL_DTB_LIST=("qrb5165-rb5")
+
+# Use the full firmware, complete linux-firmware plus Armbian's (for qcom/a650_sqe.fw)
+declare -g BOARD_FIRMWARE_INSTALL="-full"
+
+declare -g SERIALCON="${SERIALCON:-tty1}"
+declare -g GRUB_CMDLINE_LINUX_DEFAULT="clk_ignore_unused pd_ignore_unused console=tty0 arm64.nopauth efi=noruntime console=ttyMSM0,1500000n8 pcie_pme=nomsi panic=30 allow_mismatched_32bit_el0 mem_sleep_default=s2idle"
+declare -g BOOT_FDT_FILE="qcom/qrb5165-rb5.dtb"
+declare -g SECTOR_SIZE="4096"
+enable_extension "grub"
+enable_extension "grub-with-dtb" # important, puts the whole DTB handling in place.
+
+function qcom-robotics-rb5_is_userspace_supported() {
+	[[ "${RELEASE}" == "noble" ]] && return 0
+	[[ "${RELEASE}" == "trixie" ]] && return 0
+	return 1
+}
+
+function post_family_tweaks_bsp__qcom-robotics-rb5_add_services() {
+	if ! qcom-robotics-rb5_is_userspace_supported; then
+		if [[ "${RELEASE}" != "" ]]; then
+			display_alert "Missing userspace for ${BOARD}" "${RELEASE} does not have the userspace necessary to support the ${BOARD}" "warn"
+		fi
+		return 0
+	fi
+
+	display_alert "$BOARD" "Add services" "info"
+
+	# USB Gadget Network service
+	mkdir -p $destination/usr/local/bin/
+	mkdir -p $destination/usr/lib/systemd/system/
+	mkdir -p $destination/etc/initramfs-tools/scripts/init-bottom/
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/setup-usbgadget-network.sh $destination/usr/local/bin/
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/remove-usbgadget-network.sh $destination/usr/local/bin/
+	install -Dm644 $SRC/packages/bsp/usb-gadget-network/usbgadget-rndis.service $destination/usr/lib/systemd/system/
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/usb-gadget-initramfs-hook $destination/etc/initramfs-tools/hooks/usb-gadget
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/usb-gadget-initramfs-premount $destination/etc/initramfs-tools/scripts/init-premount/usb-gadget
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/dropbear $destination/etc/initramfs-tools/scripts/init-premount/
+	install -Dm655 $SRC/packages/bsp/usb-gadget-network/kill-dropbear $destination/etc/initramfs-tools/scripts/init-bottom/
+}
+
+function post_family_tweaks__qcom-robotics-rb5_enable_services() {
+	if ! qcom-robotics-rb5_is_userspace_supported; then
+		if [[ "${RELEASE}" != "" ]]; then
+			display_alert "Missing userspace for ${BOARD}" "${RELEASE} does not have the userspace necessary to support the ${BOARD}" "warn"
+		fi
+		return 0
+	fi
+
+	display_alert "$BOARD" "Enable services" "info"
+	chroot_sdcard systemctl enable usbgadget-rndis.service
+
+	return 0
+}
+
+function post_family_tweaks__qcom-robotics-rb5_extra_packages() {
+	if ! qcom-robotics-rb5_is_userspace_supported; then
+		if [[ "${RELEASE}" != "" ]]; then
+			display_alert "Missing userspace for ${BOARD}" "${RELEASE} does not have the userspace necessary to support the ${BOARD}" "warn"
+		fi
+		return 0
+	fi
+
+	if [[ "${RELEASE}" == "noble" ]]; then
+		do_with_retries 3 chroot_sdcard_apt_get_update
+		do_with_retries 3 chroot_sdcard_apt_get_install software-properties-common
+	fi
+
+	if [[ "${RELEASE}" == "noble" ]]; then
+		display_alert "Adding qcom-mainline PPA For" "${BOARD}" "info"
+		do_with_retries 3 chroot_sdcard add-apt-repository ppa:liujianfeng1994/qcom-mainline --yes --no-update
+	fi
+
+	# We need unudhcpd from armbian repo, so enable it
+	mv "${SDCARD}"/etc/apt/sources.list.d/armbian.sources.disabled "${SDCARD}"/etc/apt/sources.list.d/armbian.sources
+	do_with_retries 3 chroot_sdcard_apt_get_update
+	display_alert "Installing ${BOARD} tweaks" "warn"
+	do_with_retries 3 chroot_sdcard_apt_get_install vulkan-tools mesa-vulkan-drivers mtools zstd alsa-ucm-conf qbootctl qrtr-tools unudhcpd
+	# disable armbian repo back
+	mv "${SDCARD}"/etc/apt/sources.list.d/armbian.sources "${SDCARD}"/etc/apt/sources.list.d/armbian.sources.disabled
+
+	if [[ "${DESKTOP_ENVIRONMENT}" == "kde-plasma" ]]; then
+		display_alert "Adding Extra KDE Package" "${BOARD}" "info"
+		do_with_retries 3 chroot_sdcard_apt_get_install plasma-workspace plasma-desktop plasma-systemmonitor plasma-nm kde-standard kde-spectacle kinfocenter kscreen krfb kfind filelight \
+		dolphin clinfo wayland-utils
+	fi
+
+	if [[ "${RELEASE}" == "noble" ]]; then
+		chroot_sdcard systemctl enable qbootctl.service
+	fi
+
+	# No driver support for suspend
+	chroot_sdcard systemctl mask suspend.target
+}
+
+function post_family_tweaks_bsp__qcom-robotics-rb5_bsp_firmware_in_initrd() {
+	display_alert "Adding to bsp-cli" "${BOARD}: firmware in initrd" "info"
+	declare file_added_to_bsp_destination # Will be filled in by add_file_from_stdin_to_bsp_destination
+	# Using Elish's firmware for now
+	add_file_from_stdin_to_bsp_destination "/etc/initramfs-tools/hooks/qcom-robotics-rb5-firmware" <<- 'FIRMWARE_HOOK'
+		#!/bin/bash
+		[[ "$1" == "prereqs" ]] && exit 0
+		. /usr/share/initramfs-tools/hook-functions
+		for f in /lib/firmware/qcom/sm8250/Thundercomm/RB5/* ; do
+			add_firmware "${f#/lib/firmware/}"
+		done
+		add_firmware "qcom/sm8250/a650_zap.mbn" # Extra one for dpu
+		add_firmware "qcom/a650_sqe.fw"			# Extra one for dpu
+		add_firmware "qcom/a650_gmu.bin"		# Extra one for gpu
+	FIRMWARE_HOOK
+	run_host_command_logged chmod -v +x "${file_added_to_bsp_destination}"
+}

config/boards/qemu-uefi-x86.conf

@@ -14,7 +14,7 @@
 declare -g BOARD_NAME="UEFI x86 (QEMU)"
 declare -g BOARDFAMILY="uefi-x86"
 declare -g BOARD_MAINTAINER="davidandreoletti"
-declare -g KERNEL_TARGET="current,edge,legacy"
+declare -g KERNEL_TARGET="legacy,current,edge"
 declare -g SERIALCON="tty1,ttyS0"
 
 declare -g BOOT_LOGO=desktop

config/boards/radxa-cubie-a5e.csc

@@ -6,7 +6,7 @@ BOOTCONFIG="radxa-cubie-a5e_defconfig"
 OVERLAY_PREFIX="sun55i-a527"
 #BOOT_LOGO="desktop"
 KERNEL_TARGET="edge"
-BOOT_FDT_FILE="sun55i-a527-radxa-a5e.dtb"
+BOOT_FDT_FILE="dtb/allwinner/sun55i-a527-radxa-a5e.dtb"
 IMAGE_PARTITION_TABLE="gpt"
 #IMAGE_PARTITION_TABLE="msdos"
 BOOTFS_TYPE="fat"

config/boards/recore.csc

@@ -2,7 +2,7 @@
 BOARD_NAME="Iagent Recore"
 BOARDFAMILY="sun50iw1"
 BOOTCONFIG="recore_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 MODULES="g_serial"
 BOOT_LOGO="yes"

config/boards/rpi4b.conf

@@ -2,7 +2,7 @@
 declare -g BOARD_NAME="Raspberry Pi"
 declare -g BOARDFAMILY="bcm2711"
 declare -g BOARD_MAINTAINER="PanderMusubi teknoid"
-declare -g KERNEL_TARGET="current,edge,legacy"
+declare -g KERNEL_TARGET="legacy,current,edge"
 declare -g ASOUND_STATE="asound.state.rpi"
 declare -g KERNEL_TEST_TARGET="current"
 declare -g MODULES="i2c_dev"

config/boards/sunvell-r69.tvb

@@ -4,5 +4,5 @@ BOARDFAMILY="sun8i"
 BOARD_MAINTAINER=""
 BOOTCONFIG="sunvell_r69_defconfig"
 DEFAULT_OVERLAYS="cir analog-codec"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"

config/boards/tanix-tx6.tvb

@@ -3,6 +3,6 @@ BOARD_NAME="Tanix TX6"
 BOARDFAMILY="sun50iw6"
 BOARD_MAINTAINER=""
 BOOTCONFIG="tanix_tx6_defconfig"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 CRUSTCONFIG="tanix_tx6_defconfig"

config/boards/tritium-h3.conf

@@ -6,6 +6,6 @@ BOOTCONFIG="libretech_all_h3_cc_h3_defconfig"
 MODULES_CURRENT="g_serial"
 DEFAULT_OVERLAYS="usbhost1 usbhost2 analog-codec"
 SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"

config/boards/tritium-h5.conf

@@ -6,7 +6,7 @@ BOOTCONFIG="libretech_all_h3_cc_h5_defconfig"
 MODULES_CURRENT="g_serial"
 DEFAULT_OVERLAYS="analog-codec"
 SERIALCON="ttyS0,ttyGS0"
-KERNEL_TARGET="current,edge,legacy"
+KERNEL_TARGET="legacy,current,edge"
 KERNEL_TEST_TARGET="current"
 FULL_DESKTOP="yes"
 CRUSTCONFIG="h5_defconfig"

config/boards/uefi-arm64.conf

@@ -2,6 +2,6 @@
 declare -g BOARD_NAME="UEFI arm64"
 declare -g BOARDFAMILY="uefi-arm64"
 declare -g BOARD_MAINTAINER="rpardini"
-declare -g KERNEL_TARGET="current,edge,legacy,cloud"
+declare -g KERNEL_TARGET="legacy,current,edge,cloud"
 declare -g KERNEL_TEST_TARGET="current"
 declare -g BOOT_LOGO=desktop

config/boards/uefi-riscv64.csc

@@ -2,5 +2,5 @@
 declare -g BOARD_NAME="UEFI riscv64"
 declare -g BOARDFAMILY="uefi-riscv64"
 declare -g BOARD_MAINTAINER=""
-declare -g KERNEL_TARGET="current,edge,legacy"
+declare -g KERNEL_TARGET="legacy,current,edge"
 declare -g SERIALCON="ttyS0"

config/boards/uefi-x86.conf

@@ -2,7 +2,7 @@
 declare -g BOARD_NAME="UEFI x86"
 declare -g BOARDFAMILY="uefi-x86"
 declare -g BOARD_MAINTAINER="rpardini"
-declare -g KERNEL_TARGET="current,edge,legacy,cloud"
+declare -g KERNEL_TARGET="legacy,current,edge,cloud"
 declare -g KERNEL_TEST_TARGET="current"
 declare -g SERIALCON="tty1"
 declare -g BOOT_LOGO=desktop

config/desktop/noble/environments/i3-wm/config_base/packages

@@ -42,7 +42,7 @@ foomatic-db-compressed-ppds
 gdebi
 ghostscript-x
 gir1.2-appindicator3-0.1
-gnome-bluetooth-sendto
+gnome-bluetooth
 gnome-disk-utility
 gnome-font-viewer
 gnome-power-manager

config/desktop/noble/environments/kde-neon/sources/apt/neon.source

@@ -1 +1 @@
-deb [signed-by=/usr/share/keyrings/neon.gpg] http://archive.neon.kde.org/stable noble main
+deb [signed-by=/usr/share/keyrings/neon.gpg] http://archive.neon.kde.org/testing noble main

config/desktop/noble/environments/kde-neon/support

@@ -1 +1 @@
-csc
+eos

config/desktop/trixie/environments/i3-wm/config_base/packages

@@ -41,7 +41,7 @@ fonts-ubuntu-console
 foomatic-db-compressed-ppds
 gdebi
 ghostscript-x
-gnome-bluetooth-sendto
+gnome-bluetooth
 gnome-disk-utility
 gnome-font-viewer
 gnome-power-manager

config/kernel/linux-filogic-current.config

@@ -251,14 +251,14 @@ CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_ACT_VLAN=m
 CONFIG_NET_ACT_BPF=m
 CONFIG_CGROUP_NET_PRIO=y
-CONFIG_BT=m
+CONFIG_BT=y
 CONFIG_CFG80211=m
 CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=m
 CONFIG_MAC80211_MESH=y
 CONFIG_MAC80211_LEDS=y
-CONFIG_RFKILL_FULL=m
-CONFIG_RFKILL_GPIO=m
+CONFIG_RFKILL_FULL=y
+CONFIG_RFKILL_GPIO=y
 # CONFIG_LWTUNNEL_BPF is not set
 CONFIG_PCI=y
 CONFIG_PCIEPORTBUS=y
@@ -302,25 +302,21 @@ CONFIG_ZRAM_BACKEND_LZO=y
 CONFIG_ZRAM_DEF_COMP_ZSTD=y
 CONFIG_ZRAM_WRITEBACK=y
 CONFIG_ZRAM_MEMORY_TRACKING=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_NVME=y
 CONFIG_EEPROM_AT24=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_BSG is not set
-CONFIG_ATA=m
+CONFIG_ATA=y
 # CONFIG_ATA_VERBOSE_ERROR is not set
 # CONFIG_ATA_FORCE is not set
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_WIREGUARD=m
-CONFIG_IFB=m
 CONFIG_MACVLAN=m
 CONFIG_IPVLAN=m
 CONFIG_VXLAN=m
-CONFIG_NETCONSOLE=m
-CONFIG_TUN=m
 CONFIG_VETH=m
 CONFIG_NETKIT=y
 CONFIG_NET_DSA_AN8855=y
@@ -331,7 +327,6 @@ CONFIG_NET_DSA_MT7530=y
 # CONFIG_NET_VENDOR_LITEX is not set
 CONFIG_NET_VENDOR_MEDIATEK=y
 CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_PCS_MTK_USXGMII=y
 # CONFIG_NET_VENDOR_MICROSOFT is not set
 # CONFIG_NET_VENDOR_VERTEXCOM is not set
 # CONFIG_NET_VENDOR_WANGXUN is not set
@@ -339,11 +334,10 @@ CONFIG_SFP=m
 CONFIG_AIROHA_EN8801SC_PHY=y
 CONFIG_AIR_AN8855_PHY=y
 CONFIG_AQUANTIA_PHY=m
-CONFIG_ICPLUS_PHY=m
-CONFIG_MAXLINEAR_GPHY=m
+CONFIG_ICPLUS_PHY=y
+CONFIG_MAXLINEAR_GPHY=y
 CONFIG_MEDIATEK_2P5GE_PHY=y
-CONFIG_REALTEK_PHY=m
-CONFIG_REALTEK_PHY_HWMON=y
+CONFIG_REALTEK_PHY=y
 CONFIG_MDIO_AN8855=y
 CONFIG_PPP=m
 CONFIG_PPP_FILTER=y
@@ -521,6 +515,7 @@ CONFIG_STAGING=y
 # CONFIG_COMMON_CLK_MT8516 is not set
 # CONFIG_FSL_ERRATUM_A008585 is not set
 # CONFIG_HISILICON_ERRATUM_161010101 is not set
+# CONFIG_ARM64_ERRATUM_858921 is not set
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_MTK_PMIC_WRAP=y
 # CONFIG_MTK_MMSYS is not set
@@ -541,28 +536,27 @@ CONFIG_NVMEM_MTK_EFUSE=y
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
-CONFIG_XFS_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_XFS_FS=y
+CONFIG_BTRFS_FS=y
 CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_F2FS_FS=m
+CONFIG_F2FS_FS=y
 CONFIG_F2FS_FS_SECURITY=y
 # CONFIG_F2FS_IOSTAT is not set
 # CONFIG_DNOTIFY is not set
 CONFIG_FANOTIFY=y
 CONFIG_AUTOFS_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
 CONFIG_VIRTIO_FS=m
 CONFIG_OVERLAY_FS=y
 CONFIG_OVERLAY_FS_XINO_AUTO=y
-CONFIG_ISO9660_FS=m
-CONFIG_UDF_FS=m
+CONFIG_ISO9660_FS=y
+CONFIG_UDF_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_EXFAT_FS=y
-CONFIG_NTFS3_FS=m
 CONFIG_NTFS3_FS_POSIX_ACL=y
-CONFIG_NTFS_FS=m
+CONFIG_NTFS_FS=y
 # CONFIG_PROC_PAGE_MONITOR is not set
 CONFIG_TMPFS=y
 CONFIG_TMPFS_POSIX_ACL=y
@@ -586,9 +580,9 @@ CONFIG_PSTORE_RAM=y
 CONFIG_EROFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_CIFS=m
-CONFIG_SMB_SERVER=m
+CONFIG_NFSD=y
+CONFIG_CIFS=y
+CONFIG_SMB_SERVER=y
 CONFIG_NLS_CODEPAGE_437=y
 CONFIG_NLS_CODEPAGE_936=y
 CONFIG_NLS_ISO8859_1=y

config/kernel/linux-mt7623-current.config

@@ -768,7 +768,7 @@ CONFIG_CAN_FLEXCAN=m
 CONFIG_CAN_GRCAN=m
 CONFIG_CAN_KVASER_PCIEFD=m
 CONFIG_CAN_SLCAN=m
-# CONFIG_CAN_TI_HECC is not set
+CONFIG_CAN_TI_HECC=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_CAN_C_CAN_PCI=m

config/kernel/linux-mvebu-current.config

@@ -869,7 +869,7 @@ CONFIG_CAN_FLEXCAN=m
 CONFIG_CAN_GRCAN=m
 CONFIG_CAN_KVASER_PCIEFD=m
 CONFIG_CAN_SLCAN=m
-# CONFIG_CAN_TI_HECC is not set
+CONFIG_CAN_TI_HECC=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_CAN_C_CAN_PCI=m

config/kernel/linux-mvebu-edge.config

@@ -860,7 +860,7 @@ CONFIG_CAN_FLEXCAN=m
 CONFIG_CAN_GRCAN=m
 CONFIG_CAN_KVASER_PCIEFD=m
 CONFIG_CAN_SLCAN=m
-# CONFIG_CAN_TI_HECC is not set
+CONFIG_CAN_TI_HECC=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_CAN_C_CAN_PCI=m

config/kernel/linux-mvebu-legacy.config

@@ -2774,7 +2774,7 @@ CONFIG_CAN_FLEXCAN=m
 CONFIG_CAN_GRCAN=m
 CONFIG_CAN_KVASER_PCIEFD=m
 CONFIG_CAN_SLCAN=m
-# CONFIG_CAN_TI_HECC is not set
+CONFIG_CAN_TI_HECC=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_CAN_C_CAN_PCI=m

config/kernel/linux-rk322x-current.config

@@ -2219,7 +2219,7 @@ CONFIG_CAN_RX_OFFLOAD=y
 CONFIG_CAN_FLEXCAN=m
 CONFIG_CAN_GRCAN=m
 CONFIG_CAN_SLCAN=m
-# CONFIG_CAN_TI_HECC is not set
+CONFIG_CAN_TI_HECC=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_CAN_CC770=m

config/kernel/linux-rk322x-edge.config

@@ -2263,7 +2263,7 @@ CONFIG_CAN_RX_OFFLOAD=y
 CONFIG_CAN_FLEXCAN=m
 CONFIG_CAN_GRCAN=m
 CONFIG_CAN_SLCAN=m
-# CONFIG_CAN_TI_HECC is not set
+CONFIG_CAN_TI_HECC=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_CAN_CC770=m

config/kernel/linux-rk35xx-vendor.config

@@ -901,9 +901,6 @@ CONFIG_UNISOC_WIFI_PS=y
 CONFIG_TTY_OVERY_SDIO=m
 CONFIG_USB_NET_RNDIS_WLAN=y
 # CONFIG_IEEE802154_DRIVERS is not set
-CONFIG_LTE=y
-# CONFIG_LTE_RM310 is not set
-CONFIG_LTE_EM05=m
 CONFIG_INPUT_LEDS=m
 CONFIG_INPUT_SPARSEKMAP=m
 CONFIG_INPUT_MOUSEDEV=y

config/kernel/linux-rockchip-current.config

@@ -645,7 +645,7 @@ CONFIG_CAN_VXCAN=m
 CONFIG_CAN_FLEXCAN=m
 CONFIG_CAN_GRCAN=m
 CONFIG_CAN_SLCAN=m
-# CONFIG_CAN_TI_HECC is not set
+CONFIG_CAN_TI_HECC=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_CAN_CC770=m

config/kernel/linux-rockchip-edge.config

@@ -651,7 +651,7 @@ CONFIG_CAN_VXCAN=m
 CONFIG_CAN_FLEXCAN=m
 CONFIG_CAN_GRCAN=m
 CONFIG_CAN_SLCAN=m
-# CONFIG_CAN_TI_HECC is not set
+CONFIG_CAN_TI_HECC=m
 CONFIG_CAN_C_CAN=m
 CONFIG_CAN_C_CAN_PLATFORM=m
 CONFIG_CAN_CC770=m