Also tick on:
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=m
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=m
CONFIG_SPMI=y
CONFIG_SPMI_HISI3670=m
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
- PocketBeagle 2 and BeaglePlay requires this driver.
- The M4 core supports ZephyrRTOS and FreeRTOS along with bare-metal.
- Is already enabled in current and edge branch
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
- Using RT kernel is a common thing on pocketbeagle 2. So add current-rt
branch similar to what is being done for the base k3 family.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
- PocketBeagle 2 and BeaglePlay requires this driver.
- The M4 core supports ZephyrRTOS and FreeRTOS along with bare-metal.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
This was required in order to get the wif-pwrseq and bluetooth
functioning correctly on the BPI-M4-Zero. I suspect it will
have no negative results on other units. But of course this
needs to be tested.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
- The edge branch will soon move to 6.16, so adding the current branch
now.
- The kernel config is just a copy of edge config since both kernels are
the same right now.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
KASLR, or Kernel Address Space Layout Randomization, is a
security mechanism used in operating system kernels to randomize
the memory locations of kernel code and data. This makes it
significantly harder for attackers to exploit memory corruption
vulnerabilities by preventing them from knowing the exact
addresses of kernel components.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
The old method carried along with board-pbp-add-dp-alt-mode.patch only
makes typec work in one(normal) orientation. This patch introduces a
proper extcon driver and makes the workaround cleaner, so orientation
switch is working.
Improvements:
- type-c DP on rk3399 works with both orientations
- type-c USB 3.0 on rk3399 works with both orientations, with minor
issues, see below
Caveats:
- Powered USB-C hubs may be not recognized, and can be worked around by
loading a gadget driver, or manually toggling the mode once for each
connection.
- Some dual-role devices(phone, tablet) may be not recognized.
Affected boards:
- TinkerBoard 2/2S
- Pinebook Pro
- NanoPC T4
- Orange Pi 4
- Orange Pi 4 LTS
Tested on tinkerboard 2s. This patch contains other minor fixes for
tinker2's device tree, including adding a missing fan node, adding color
labels to leds.
The 2 patches adding dp support for nanopc t4 and pinebook pro are also
updated accordingly.
The device trees of Orange Pi 4 / 4 LTS are also updated to match the
new implementation.
TI SDK supports images with real-time kernel. Add support for building
such images for the `current` release by adding a config file for it.
The RT image is built with the `current-rt` branch.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
- BeagleBoard.org boards normally ship with USB cdc enabled to allow
network sharing and ssh support over usb.
- This is specially important for boards like pocketbeagle2 since it
does not have built-in wifi.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Change from "y" to "m"
Before
[ 2.423992] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 2.424718] rtc-hym8563 1-0051: registered as rtc0
[ 2.425770] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 2.425789] rtc-hym8563 1-0051: hctosys: unable to read the hardware clock
[ 3.817166] rk808-rtc rk808-rtc.5.auto: registered as rtc1
After
[ 3.790107] rk808-rtc rk808-rtc.5.auto: registered as rtc0
[ 3.801742] rk808-rtc rk808-rtc.5.auto: setting system clock to 2017-08-05T09:48:13 UTC (1501926493)
[ 3.919628] rtc-hym8563 1-0051: registered as rtc1
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
