* import new layout for libreelec patches (no more mbox)
* refactor existing patches to kernel 6.17
* fix uboot issue causing VOP IOMMU page fault and no screen
* Add_to_radxa-e52c.conf
1. Add a network rule to rename interfaces to match device port labeling (wan,lan)
2. Add network activity LEDs config for wan and lan for radxa-e52c
* Update config/boards/radxa-e52c.conf
Coderabbitai suggested clean-up of function name.
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* Update radxa-e52c.conf - fix typo.
* Update radxa-e52c.conf - fix function consistency
As recommended by EvilOlaf
---------
Co-authored-by: coderabbitai[bot] <136622811+coderabbitai[bot]@users.noreply.github.com>
* Khadas VIM4: U-Boot: Mod bootargs/defconfig and add bootscr support
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Pull U-Boot from CoreELEC instead of Khadas
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Remove setexpr bootargs sub rootfstype= from boot.cmd
This is no longer required
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Meson S4T7: family.conf: Add missing `mkdir -p "${tbasedir}"`
The toolchains fail to download because the dir isn't created
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Meson T7: Add rootfstype= to command line
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Khadas VIM4: Add extra boot arguments
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Remove `viraniac` as maintainer and add `rw` to cmdline
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Amlogic T7: Add `fsck.repair=yes` and `rootwait` to cmdline
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Amlogic T7: Move `${bootargs}` placement
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
---------
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Co-authored-by: Igor <igor@armbian.com>
When patches outside the series are in the target folder
KERNELPATCHDIR = "archive/sunxi- $ {KERNEL _ MAJOR _ MINOR}"
they create problems for all other patches in the series
and are difficult to move to the new kernel version because
they are not properly designed.
Move the patches to a separate development folder until
the design is fixed so that we can add them to the series.
Add board configuration for FriendlyELEC NanoPi R76S, including:
- nanopi-r76s.conf with board parameters and boot settings
- initial kernel / U-Boot patch for device tree and board bring-up
XpressReal(https://xpressreal.io/) is a family of Single Board Computers
developed in collaboration between Fyde Innovations, Radxa and Realtek.
XpressReal T3 is the first product in the family - a small form factor
high performance single board computer powered by the Realtek RTD1619B,
which runs FydeOS/openFyde and Linux!
Now we are adding the awesome Armbian Linux support for XpressReal T3!
This commit introduces some binary files that XpressReal T3 needed:
- firmware/realtek/rtd1619b
These binaries are the firmware for rtd1619b peripherals
(including the audio decoder, video decoder, etc.).
- u-boot-fw.tar.gz
This contains some co-processor firmware,
which needs to be loaded by u-boot in the early stage of boot.
- u-boot-prebuilt.tar.gz
These are hwsettings related files, used for tasks such as DDR initialization.
These files come from the rtd1619b SDK, which has already been open-sourced on our github:
- [firmware](https://github.com/XpressReal/linux-sdk/tree/main/meta-xpressreal/recipes-kernel/linux-firmware/files/rtd1619b)
- [u-boot prebuilts](https://github.com/XpressReal/linux-sdk/tree/main/meta-xpressreal/recipes-bsp/u-boot/files/prebuilt/rtd1619b)
Switch to newer U-Boot since it works reliably and provides upstream
improvements.
Add patch/u-boot/v2025.10 and the generic patch, as BOOTPATCHDIR cannot
be unset (fallback to legacy fails).
BOOT_SCENARIO="binman-atf-mainline" cannot be set here since it applies
globally to the CSC file and would break branch=vendor. Users who want
it can enable it manually.
