Also tick on:
CONFIG_SPI_LOOPBACK_TEST=m
CONFIG_SPI_SLAVE=y
CONFIG_SPI_SLAVE_TIME=m
CONFIG_SPI_SLAVE_SYSTEM_CONTROL=m
CONFIG_SPMI=y
CONFIG_SPMI_HISI3670=m
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Setting MODULES="" overrides any module list inherited from the family
configuration; this may unintentionally lose essential vendor-kernel modules
(e.g. rockchip-rga, fusb302, etc.).
- PocketBeagle 2 and BeaglePlay requires this driver.
- The M4 core supports ZephyrRTOS and FreeRTOS along with bare-metal.
- Is already enabled in current and edge branch
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
- Using RT kernel is a common thing on pocketbeagle 2. So add current-rt
branch similar to what is being done for the base k3 family.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
- PocketBeagle 2 and BeaglePlay requires this driver.
- The M4 core supports ZephyrRTOS and FreeRTOS along with bare-metal.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
This was required in order to get the wif-pwrseq and bluetooth
functioning correctly on the BPI-M4-Zero. I suspect it will
have no negative results on other units. But of course this
needs to be tested.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
* Add option for number of threads used by build system
Attempt to fix https://github.com/armbian/build/issues/6907
* Add CPUTHREADS to replace USEALLTHREADS
Defaults to 150% as was always the case, otherwise allow user to override number of threads.
* Add initial support for Orangepi 5 Pro
Tested and Working:
Wireless & Bluetooth
USB 2.0 + USB 3.1
HDMI 2.1
Gigabit Ethernet (PCIe to RJ45 - Need drivers YT6801)
NVMe PCIe 2.0
MicroSD
Audio Controller es8388 - Audio Out
FAN PWM
LEDs PWM
Not Working:
Onboard Microphone
HDMI 2.0 (DP-HDMI - rockchip,rk3588-dp No Driver)
Not Tested:
Camera 1,2
eMMC
* OPi 5 Pro: Ethernet Driver Installation on First Boot
Implemented a simple script to install the driver
during first boot using the installation headers
included in the image. Takes just a few seconds
on first boot.
Disclaimer: Attempted installation in a chroot env but failed.
* fix: Make first-boot Ethernet driver install more robust
The `eth-driver-firstboot.service` would sometimes fail on first boot with a "Resource temporarily unavailable" error. This happened when another process had a lock on `dpkg`.
To fix this, the installation script now waits for any `dpkg` locks to be released before attempting to install the driver package. It also includes a retry mechanism (3 attempts) in case of a transient failure.
This ensures the network driver is successfully installed, providing a better out-of-box experience.
- The edge branch will soon move to 6.16, so adding the current branch
now.
- The kernel config is just a copy of edge config since both kernels are
the same right now.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
