- I thought sending the spl_loader blob puts it into "Loader" mode, but...
- ... turns out "Loader" mode is a separate (rockusb, etc) mode.
- So if in Maskrom mode, just send the loader, and _trust_ it can now WriteLba
- still keeps the timeout, for when a loader is not accepted
- notice: the rkbin repo or the bins themselves are not hashed or included in the u-boot version (yet)
- make sure to avoid caching when building with those custom git/branch (`ARTIFACT_IGNORE_CACHE=yes CLEAN_LEVEL=make-uboot`)
Disabled ws2812 driver for all sunxi64 boards in edge kernel. As this
driver is used by Bigtreetech CB1 board, the driver is enabled for the
same but edge kernel is kept back at 6.2.16. Once the driver has been
updated, we can revert this commit.
- move FIP signing code from meson-sm1.conf's `uboot_custom_postprocess()` to the board's own `post_uboot_custom_postprocess` hook
- fetch a secondary FIP blob repo at a revision with working FIP blobs for SPI (see https://github.com/LibreELEC/amlogic-boot-fip/pull/10)
- implement `post_uboot_custom_postprocess__khadas_vim3l_uboot_new_and_old_blobs()` doing a dance for SD/eMMC with new blobs, and SPI with old blobs.
- move FIP signing code from meson-g12b.conf's `uboot_custom_postprocess()` to the board's own `post_uboot_custom_postprocess` hook
- fetch a secondary FIP blob repo at a revision with working FIP blobs for SPI (see https://github.com/LibreELEC/amlogic-boot-fip/pull/10)
- implement `post_uboot_custom_postprocess__khadas_vim3_uboot_new_and_old_blobs()` doing a dance for SD/eMMC with new blobs, and SPI with old blobs.
- introduce hooks `grub_early_config`, `grub_pre_install` and `grub_late_config`
- what we see here is an extension that itself has hooks, that just works
- introduce extension `grub-with-dtb`, which
- enables `grub` extension
- requires `BOOT_FDT_FILE` to be set
- includes `/etc/armbian-grub-with-dtb` with `BOOT_FDT_FILE=` in the bsp-cli
- includes `/etc/kernel/postinst.d/armbian-grub-with-dtb` in the bsp-cli
- which reads the above and creates links for `/boot/armbian-dtb-<version>` when deploying deb's
- adds implementations of the hooks above to
- replace the distro's `10_linux` with our own `09_linux_with_dtb`
- which looks for `/boot/armbian-dtb-<version>`
- forcibly run `/etc/kernel/postinst.d/armbian-grub-with-dtb` during image build, since bsp-cli is installed after linux-image
- uefi-arm64: enable GRUB wallpaper by setting `UEFI_GRUB_TERMINAL=gfxterm`
- force GRUB_FONT so Ubuntu is not confused and gfxterm (incl wallpaper) finally works
- add `GRUB_CMDLINE_LINUX_DEFAULT` with `efi=noruntime clk_ignore_unused pd_ignore_unused` so it actually boots
- use `grub-with-dtb` for the (required) DTB usage in grub
- use a customize hook to add a lot of modules & fw into initrd, required for booting
- if on RELEASE=lunar, add Ubuntu's "x13s Concept" PPA and a few packages for battery control/audio
This brings the patch set up to 2023-06-22 wireless-next
Drivers tested;
8822CS. 8821CU and 8723DS
Notables;
Not seeing random dmesg spam `rtw_8822cs failed to get tx report from firmware` which I would see on both the CS and CU from time to time.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
