* Remove deprecated Odroid XU4 legacy 4.14.y branch
* Clean deprecated kernels from meson64 family
- legacy kernel 4.9 was removed
- current 5.10 was replaced with 5.19
- edge remains on 5.19 until someone bumps it to 6
- patches between 5.11 and 5.18 were removed, 5.10 will be kept for awhile
* Update configs
* meson64-edge/5.19: use `tag:v5.19-rc2`, meson64 kernel config and kernel patches, by @adeepv
* meson64-edge/5.19: we don't need `CONFIG_ARCH_ROCKCHIP=y` for meson64, right?
* meson64-edge/5.19: remove `meson_drv_shutdown` revert patch, instead `CONFIG_DRM_MESON=y` and its dependencies in .config
- this allows other meson64's to shutdown properly, while allowing the N2(+) to reboot without kernel-side hangs
* meson64-edge/5.19: odroidn2(+): remove SD UHS modes patch for ODROID N2(+)
- it works when cold-booted
- but changes voltage to enable
- when rebooted, voltage persists and uboot can't read the SD anymore
- adding the "odroid,reboot" driver+dt that is supposed to fix this, doesn't
- so for now remove it
* meson64-edge/5.19: odroidn2(+): add dumb gpio fan at 30 celsius
- backport from rework in 5.10
* meson64-edge/5.19: odroidhc4: bring back `fan1_input` by adding fan details to DT
- yeah, I know; the cooling map is right there too, so empty, poor thing. for later.
* meson64-edge/5.19: bump to 5.19-rc3
* meson64-edge/5.19: radxa-zero: add patch to remove UHS mode so `wifi` works
- sent by @pyavitz: https://raw.githubusercontent.com/pyavitz/debian-image-builder/feature/patches/amlogic/radxazero/wifi/001-arm64-dts-amlogic-radxa-zero-sdio-card-speed.patch
- tested by @lanefu
* meson64-edge/5.19: bump to 5.19-rc4
* meson64-edge/5.19: bump to 5.19-rc5
* meson64-edge/5.19: bump to 5.19-rc7
* meson64-edge/5.19: bump to 5.19.y branch, which is 5.19.0 right now
* Add kernel config - tested on Odroid N2+
Co-authored-by: Vyacheslav Bocharov <adeep@lexina.in>
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
Radxa Zero 2 is a small form factor SBC based on the Amlogic A311D
chipset that ships in a number of eMMC configurations:
- Amlogic A311D (Quad A73 + Dual A53) CPU
- 4GB LPDDR4 RAM
- 32/64/128GB eMMC
- Mali G52-MP4 GPU
- HDMI 2.1 output (micro)
- BCM4345 WiFi (2.4/5GHz a/b/g/n/ac) and BT 5.0
- 1x USB 2.0 port - Type C (OTG)
- 1x USB 3.0 port - Type C (Host)
- 1x micro SD Card slot
- 40 Pin GPIO header
Signed-off-by: Yuntian Zhang <yt@radxa.com>
* Bump Meson64 u-boot to 2022.01
Tested VIM boards
* Move Jethub related patches under common meson64 patch collection
* Move jethub patch to per board and remove unneded settings
* extensions framework (née "fragments")
- this should actually change nothing at this point, just add capabilities
- the framework is implemented in lib/extensions.sh
- the "if function x exists then call x" replaced with call_extension_method()
- +inline documentation
- +compatibility names
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions framework; meta-extensions: auto-docs and sample extension gen
- 2 extensions dealing with extensibility itself
- detect-unused-extensions: shows which extensions are enabled, but never called.
- gen-sample-extension-docs: generates a sample empty extension & Markdown documentation for extensions
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* new extension methods and features via config variables in core Armbian
- `SKIP_EXTERNAL_TOOLCHAINS=yes` - does not download or use any linaro toolchains, only build host-installed ones
- `SKIP_BOOTSPLASH=yes` - does not patch kernel for splash file
- `EXTRA_BSP_NAME=xyz` - allows for BSP variants, useful for when extensions modify the BSP
- `EXTRA_ROOTFS_MIB_SIZE=x` - add x mib's to rootfs size, for use with very small images
- `KERNEL_EXTRA_TARGETS` - what extra targets to make kernel for, default to "modules dtbs"
- `BOOTCONFIG=none` - does not build nor install u-boot; also doesn't handle bootscripts et al
- `unset KERNELSOURCE` - does not build nor install kernel, nor build initrd, nor build nor install firmware
- `ARMHF_ARCH=skip` - does not add armhf to apt/dpkg, thus pure arm64
- `SKIP_ARMBIAN_REPO=yes` - results in armbian.list.disabled in the final image
- define `APT_EXTRA_DIST_PARAMS` with apt-cacher-ng options and use it for `PACKAGE_LIST_INSTALL/REMOVE` et al
- initial support for targeting x86/amd64 UEFI and BIOS
- some do's/don'ts for x86/amd64, like a different `UBUNTU_MIRROR` default
- GPT/EFI(ESP) partitions (fat, `UEFISIZE=256` to enable, mount `UEFI_MOUNT_POINT=/boot/efi`, first on disk but ends
up at `$uefipart`=15)
- GPT/BIOS partitions (fat, `BIOSSIZE=1` to enable, second on disk but ends up at partition 14)
- `UEFI_FS_LABEL="armbiefi"` - to set the FAT label for the EFI partition, visible in Win/Mac
- hard-requires gdisk package host-side
- add add_host_dependencies() extension method; fill `EXTRA_BUILD_DEPS="pkg pkg2"` to install to host before toolchains
download
- add pre_prepare_partitions() extension method, for custom partition size calculations
- add create_partition_table() extension method, used to do full-custom partitioning if `USE_HOOK_FOR_PARTITION=yes`
- add post_create_partitions() extension method, mostly for easy debugging
- add post_write_sdcard() extension method, where you can also set `SKIP_VERIFY=yes` to skip sdcard verification
- add post_install_kernel_debs() extension method.
- multiple fixes to bsp to avoid spurious errors when files are not where it expects
- v4: detect `update-initramfs` failure and abort build with useful message if it does
- v4: show useful stacktrace in `exit_with_error`
- if `ERROR_DEBUG_SHELL=yes`, drop into a shell before unmounting/deleting everything, so we can inspect what went wrong
- v4: display a message before `apt-get remove PACKAGE_LIST_BOARD_REMOVE` packages, so any errors while removing are easy to understand
- v4: preserve kernel .config's dates when copying
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions framework; refactor tool fetching/building into extensions
- a few examples of core refactoring using extensions
- sunxi-tools extension, enabled by 2 different sunxi family includes ("reuse" example)
- marvel-tools extension, enabled by 2 different mvebu family includes
- rkbin-tools extension, enabled by rockship64_common family include
- amlogic-fip/c2-blobs stuff refactored directly into meson64_common.inc ("single-use" example)
- removed the 'testings' fetch_from_repo completely since not used anywhere.
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* .wip's for UEFI arm64 and UEFI/BIOS x86 via new GRUB extension
- v3: added `growroot`-awareness to `armbian-resize-filesystem`
- the partition-growing part of `armbian-resize-filesystem` does not deal correctly with the UEFI layout
- `growroot` is installed on UEFI images by default, that handles growing partition during initramfs
- now `armbian-resize-filesystem` handles `resize2fs` only, and works.
- v4: reworked UEFI board/family/include structure:
- use Distro's `linux-generic` kernel only for `current`
- `edge` now builds it's own pure-mainline `5.15.y` kernel, for both x86 and arm64
- `.config` taken from Ubuntu, probably needs tuning for EXTRAWIFI=yes et al
- v4: introduce `SKIP_KERNEL_SYMLINK=yes`, tested in `builddeb`
- to avoid symlinking kernel; u-boot likes it, but grub and flash-kernel hates it
- v5: many fixes
- v7: more small fixes.
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* .wip for the RaspberryPi 4B via new flash-kernel extension
- this does not build it's own kernel "yet", but uses default linux-raspi kernel from Ubuntu
- flash-kernel is not really a bootloader
- it just prepares kernel et al a FAT partition for booting by the RPi4b bootloader
- flash-kernel is standard Debian package, but has only been tested on Ubuntu releases
- it is really only known-working since Hirsute release.
- Debian's rpi kernel is armhf only, so out of scope here, at least until we add source-built kernels.
- v3: fixed focal rootfs build. untested.
- v3: better variable names, preparing for source-built kernel.
- v5: new edge build with pure mainline kernel.
- v6: many fixes and some hacks for packaging and layout, also firmware (using Ubuntu's)
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Added first patch to edge x86 related to wifi drivers
* extensions: leave hostapd alone; remove hackish ext; block reentrancy
- package-list-utils does not belong in this PR
- grub or bcm2711 is not the place to remove hostapd
- block recursive enable_extension() calls, for now.
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* gen-sample-extension-docs: fix: avoid counter in generated sample
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions: dependencies: enable_extension() in extensions with a stack
- and better stacktraces, I hope
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Remove code from package list since we don't have it in repository
Adjust kernel config to disable driver that needs further polishing.
* Allow amd64 to build the same desktops as aarch64. We only have this limit for armhf, where some desktops don't work
* amd64: allow building amd64 on aarch64 with system toolchain
- conditionally add gcc-x86-64-linux-gnu to hostdeps
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* add libelf-dev directly to hostdeps (and Dockerfile), remove extension
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* packaging: remove SKIP_KERNEL_SYMLINK hack, fix the root cause
- which was the missing $image_name for non-arm64 & non-arm, so: x86 for example
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* grub: really obliterate u-boot stuff from BSP
- for now. soon we'll refactor u-boot so not have to do this
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* flash-kernel: really obliterate u-boot stuff from BSP
- for now. soon we'll refactor u-boot so not have to do this
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions: add host_dependencies_ready() hook
- this passes FINAL_HOST_DEPS containing all hostdeps for the run after they're installed
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Add verification functions for correct selection.
* If UEFI Skip symlink creation
* Do not create dtb package for amd64
* Skip scripts folder cleaning if build process native.
Skip creating postinst prerm scripts for headers.
* Skip applying headers-debian-byteshift.patch if build native
* Fix architecture syntax as x86_64
* Revert "amd64: allow building amd64 on aarch64 with system toolchain"
This reverts commit 0c5ee20bb1.
* Compare architectures before starting compilation.
Signed-off-by: The-going <48602507+The-going@users.noreply.github.com>
* extensions: cleanups after fixes by the-Going
- packaging:
- there is _no need_ anymore for the symlink hack, CONFIG_EFI or no. But check is great, see below
- it's not `amd64` that has no DTB's, it's all UEFI, thus: `is_enabled CONFIG_EFI`, thanks!
- Explicitly disallow "reverse cross compile" in amd64.conf.
- whitespace-only-deletions: revert. we shall shellfmt the whole thing one day, but not today.
- fix a few syntax warnings in newly introduced code (floating `$ARCH` vs `"${ARCH}`) - blame shellcheck
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* packaging: fix: turns out a lot of boards have CONFIG_EFI=y, can't use that for dtb/no-dtb decision.
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* grub: remove debug
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* firmware: allow installing `armbian-firmware-full`; make it really full
- can now use `BOARD_FIRMWARE_INSTALL="-full"` to install full firmware for the board. enable for UEFI.
- don't rely on KERNELSOURCE for firmware-related decisions. introduce `INSTALL_ARMBIAN_FIRMWARE` which defaults to `yes`
- rpi4b/flash-kernel: disable Armbian firmware; we need linux-firmware-raspi2, which conflicts.
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions: log to /${LOG_SUBPATH}/ instead of fixed /debug/
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions: introduce cleanup_extension_manager() called by build-all-ng's unset_all()
- to reset/unset everything done by the the initializer, so build can run again
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions: remove 'global' logging, for use with build_all_ng
- enable_extensions() will have to live on without logging to file. it's just too early.
- now init EXTENSION_MANAGER_TMP_DIR in initialize_extension_manager()
- now init EXTENSION_MANAGER_LOG_FILE in initialize_extension_manager()
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* extensions: build-all-ng.sh bugfix due to extension's debug to stdout
- extensions (among other things) can produce output to stdout when activated
- fix: check_hash() produced "idential" (sic, now changed to IDENTICAL) to stdout as a trigger
- debugging output got mixed with "idential", rendering hash cache void for families that used extensions
- eg: sunxi, others
- fix is to send stdout to the bitbucket when sourcing the board & arch config files
- proper fix would be stop using stdout in this case and use return code for check_hash()
- one day soon
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Add CI build targets
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
Co-authored-by: The-going <48602507+The-going@users.noreply.github.com>
* meson64: bump u-boot to 2021.07, rework patches
- as always based on chewitt's tree, with differences:
- squashed versions of HC4+SATA, Radxa Zero, DT tree sync patches
- so that DTB/config/code changes related to the same feature/board are grouped
- removed documentation changes and Makefile reordering patches
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* meson64: ODROID HC4/N2: simplify/remove board vs family hacks; better SPI support
- thanks to mainline 2021.07 u-boot and it's HC4 config we can remove the conditionals
- boards now define the u-boot vars instead of conditionals in family
- on the HC4, build u-boot twice: one for SD (old C4 config) and one for HC4 (new SATA/SPI config)
- reason is that the HC4 version does not work very well unless it is actually booted from SPI
- meson64_common: don't override UBOOT_TARGET_MAP if board-defined
- but the default UBOOT_TARGET_MAP is still defined if the board didn't
- (sneakily) add lm-sensors fancontrol to the HC4's board packages
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Bumping EDGE kernel to 5.14.y
Meson64:
- removing Odroid reboot shutdown patch since its probably not needed anymore
Rockchip64:
- removing Rockpi S. No interest to maintain this any further
- removing PBP suspend. Doesn’t align. Need inspection if some other way was mainstreamed
- temporally removing Orangepi R1
* Re-adding rockpis, pbp suspend, HFLPS170 wifi and cleanup
* Removing deprecated patch, fixing ap6256 wifi
* Re-enable Opi R1 plus, untest
* Add and fix Radxa Zero
* Add support for Radxa Zero
u-boot: new patch based on v2021.04
kernel: use patches sent to kernel list by chewitt
Tested with minimal build and cinnamon desktop:
- SD/eMMC, ok
- USB3, works in USB 2 mode
- HDMI, ok
- WiFi/BT, ok
Signed-off-by: Jack Ma <jack@radxa.com>
* Add build targets
* Cleanup and set min speed to 666000
* Change to WIP target
Support status undetermined
Co-authored-by: Jack Ma <jack@radxa.com>
- We really want the u-boot.bin.sd.bin for HC4
- During VIM3L-adding commit, "odroid*c4" was replaced with "odroid-c4" and "odroid-hc4"
- Which is cool but it's actually "odroidc4" and "odroidhc4"
- Add a warning to save future time if no FIP tree decided by SM1 family
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* Bugfix - fancy modesetting seems to be broken on Amlogic GLX series. Reverting to fbdev fixes the problem of desktop not showing up.
* Tested on Vim2
- Armbian already had all the FIP-magic needed, just use it.
- Introduce USE_ODROID_UBOOT with a list of branches that use Odroid's 2015 u-boot
- this is mostly in preparation for non-Odroid G12B/meson64 boards (Khadas VIM3...)
- In case $BRANCH is listed in USE_ODROID_UBOOT:
- use BOOTCONFIG_ODROID and BOOTSCRIPT_ODROID from board.conf
- build 2015 u-boot just like before
- Small hack into boot-meson64.cmd to handle u-boot vs kernel: n2_plus vs n2-plus DTB/FDT naming mismatch
- overrides the default $fdtfile based on $variant
- armbianEnv still has final say if $fdtfile is set there (it isn't for n2/n2plus)
- Extra:
- remove unused n2-mainline bootscript (maybe from a previous try?)
- comments about FIP trees being identical across N2/N2Plus and C4/HC4 families so no future time wastage
- only set CPUMIN/CPUMAX/GOVERNOR in meson64_common.inc if not already set by the board.conf
- Add some ${bootargs} debugging to mainline/default boot-meson64.cmd
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
* cleanup add vim3l
* Add Khadas edge config
* Add Khadas edge sources definitions. It boots
* Change configuration to maximised model
* Adjust build configs
* witch to case statement for meson x11 config
* push vim1 naming
* Booting VIM2 with khadas prebuild u-boot
Can load from an empty eMMC, can be installed to eMMC via nand-sata-install
* Add Vim1 and move 1 and 2 to supported. VIM1 is not tested yet.
* Enable full featured desktop with 3D for khadas vim 1 and vim2
* Update meson64_common.inc
Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
* Bump imx6 edge to 5.12.y
* Bump odroid xu4 edge to 5.12.y
* Bump Jetson nano edge to 5.12.y
* WIP: Bump sunxi to 5.12.y
- create a copy of patches and make a new link
- wireless patches needs adjutement to 5.12
- some patches are still failing
* Adjust wireless patches to build on 5.12.y
* Remove template wireless patch
* Move Espressobin edge to 5.12.y
* Bump mvebu to 5.12
- patch 92-mvebu-gpio-remove-hardcoded-timer-assignment.patch was disabled @heisath
- adjusted wireless driver for 8723ds
* Adjust sunxi / sunxi64 edge to compile
* Fix kernel config for Jetson nano edge
* bump meson64 to 5.12.y
* bump rockchip edge to 5.12.y
* Bump rockchip64 to 5.12.y
* Bump rk322x edge to 5.12.y
@paolosabatino
* Cleanup im6, re-add 5.10.y patches since one is missing in 5.12.y
* Update odroidxu4 edge links
* rk322x: moved rk322x-edge to kernel 5.12, fix overlay compilation, retouched included kernel modules
* Cleanup: remove deprecated config
Co-authored-by: Paolo Sabatino <paolo.sabatino@gmail.com>
* Upgrade Meson64 u-boot to 2020.10
Tested on C1,C2 and C4
* Remove accidentaly added patch
* Remove patches that are not needed anymore and restore / adjust the one that is still needed for Lepotato
- curently attached to RC7 as https://github.com/armbian/build/pull/2378
- config derived from current and contains all latest changes
- dirty reboot and eth0 reset hacks are not added and can be added later if still needed (need_check subfolder)
Tested once again on N2/N2+
Note: disabled mesond_vdec module in kernel config since it crashes complete video system when loaded. Need to be added back once stable - or perhaps we need to adjust some parameters?
* Add initial support for Odroid N2+
* Update C4 config and test booting
* Updates to C4, N2, N2+
- merge C4 and N2 legacy under meson64, same u-boot
- upgrade legacy kernel to meed DTB from mainline
- merge N2 and N2+, add a hack to display + in motd when N2+ is detected
- shortly spin N2 fan at startup
- merged N2 mainline and legacy boot script
- add upstream patches
* One of the regulators were breaking booting of Odroid N2
Co-authored-by: Werner <EvilOlaf@users.noreply.github.com>
* Initial commit for kernel boot splash
* Add startup files to disable bootlog when system is up / down
* Update logo, remove deprecated one
* Introduce new u-boot variable bootlogo
* Adjust kernel config
* Make logo possible on Odroid XU4
- add legacy and current upstream patches
- delete xu4 environment since its not used
* Cleanup C2,C4, both tested, logo works on mainline,
- adding legacy upstream patches for c4
* Enable bootlogo by default on Odroid N2
* Enable logo on RK3399 desktop images
* Cleanup the rest of the environment files
* Add initrd hook that copy splash file to initrd.
* Missing logo bits for one boot scripts
* Enable boot logo on Pinebook A64
* Enable bootlogo on Teres
* Update config
