JDM170/build
1
0
Fork 0
mirror of https://github.com/armbian/build synced 2025-09-24 19:47:06 +07:00
Code Issues Packages Projects Releases Wiki Activity

no message

Browse Source
This commit is contained in:
Igor Pecovnik
2014-10-08 07:28:49 +02:00
parent 3b0cd2adb8
commit 8bb2ce7277
19 changed files with 7774 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

BIN
bin/ap6210.zip Normal file
View File

Binary file not shown.

BIN
bin/hostapd23.tgz Normal file
View File

Binary file not shown.

BIN
bin/imagewriter.exe Normal file
View File

Binary file not shown.

BIN
bin/linux-firmware.zip Normal file
View File

Binary file not shown.

BIN
bin/ramlog_2.0.0_all.deb Normal file
View File

Binary file not shown.

BIN
bin/temper.tgz Normal file
View File

Binary file not shown.

1072
config/bananapi.fex Normal file
View File

File diff suppressed because it is too large Load Diff

19
config/hostapd.conf.bananapi Normal file
View File

@@ -0,0 +1,19 @@
ssid=BANANA
interface=wlan0
hw_mode=g
channel=1
bridge=br0
logger_syslog=0
logger_syslog_level=0
wmm_enabled=0
wpa=2
preamble=1
wpa_psk=66eb31d2b48d19ba216f2e50c6831ee11be98e2fa3a8075e30b866f4a5ccda27
wpa_passphrase=12345678
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP
rsn_pairwise=CCMP
auth_algs=1
macaddr_acl=0

24
config/interfaces.bonding Normal file
View File

@@ -0,0 +1,24 @@
auto eth0
iface eth0 inet manual
bond-master bond0
bond-primary eth0
bond-mode active-backup
auto wlan0
iface wlan0 inet manual
wpa-ssid your_SSID
wpa-psk xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# to generate proper encrypted key: wpa_passphrase your_SSID your_password
bond-master bond0
bond-primary eth0
bond-mode active-backup
# Define master
auto bond0
iface bond0 inet dhcp
bond-slaves none
bond-primary eth0
bond-mode active-backup
bond-miimon 100

23
config/interfaces.default Normal file
View File

@@ -0,0 +1,23 @@
# Wired adapter #1
auto eth0
iface eth0 inet dhcp
# hwaddress ether # if you want to set MAC manually
# pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838
#
# Wired adapter #2
#auto eth1
# iface eth1 inet dhcp
# hwaddress ether # if you want to set MAC manually
# pre-up /sbin/ifconfig eth0 mtu 3838 # setting MTU for DHCP, static just: mtu 3838
#
# Wireless adapter #1
#auto wlan0
# allow-hotplug wlan0
# iface wlan0 inet dhcp
# wpa-ssid SSID
# wpa-psk xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
# to generate proper encrypted key: wpa_passphrase yourSSID yourpassword
#
# Local loopback
auto lo
iface lo inet loopback

12
config/interfaces.hostapd Normal file
View File

@@ -0,0 +1,12 @@
auto lo br0
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet manual
allow-hotplug wlan0
iface wlan0 inet manual
iface br0 inet dhcp
bridge_ports eth0 wlan0
#hwaddress ether # will be added at first boot

3953
config/linux-sunxi.config Normal file
View File

File diff suppressed because it is too large Load Diff

64
config/lirc.conf.bananapi Normal file
View File

@@ -0,0 +1,64 @@
# generated by devinput.sh
begin remote
name devinput
bits 16
eps 30
aeps 100
pre_data_bits 16
pre_data 0x0001
post_data_bits 32
post_data 0x00000001
gap 132799
toggle_bit 0
begin codes
POWER 87
MUTE 92
HELP 5
PREFS 9
FAVS 21
R2C1 4
R2C2 8
R2C3 20
VOLUME+ 255
VOLUME- 93
INFO 16
MOUSE 17
ZOOM+ 12
ZOOM- 88
R5C1 84
R5C2 91
R5C3 23
MENU 22
HOME 71
BACK 79
LEFT 6
RIGHT 14
UP 67
DOWN 10
OK 2
STOP 19
PLAY 80
SEARCH 13
REV 7
FWD 3
PREV 15
NEXT 11
RED 85
GREEN 78
YELLOW 73
BLUE 72
1 26
2 1
3 69
4 89
5 77
6 64
7 82
8 83
9 65
0 90
AUDIO 68
SUBTITLE 70
end codes
end remote

8
config/modules.bananapi Normal file
View File

@@ -0,0 +1,8 @@
hci_uart
gpio_sunxi
rfcomm
hidp
sunxi_ss
sunxi-ir
bonding
spi_sun7i

5
config/uEnv.bananapi Normal file
View File

@@ -0,0 +1,5 @@
console=ttyS0,115200
root=/dev/mmcblk0p1 rootwait
extraargs=rootfstype=ext4 sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_no_mali_mem_reserve sunxi_fb_mem_reserve=16 hdmi.audio=EDID:0 disp.screen0_output_mode=EDID:1280x720p60 panic=10 consoleblank=0
script=bananapi.bin
kernel=uImage

374
patch/bananagmac.patch Normal file
View File

@@ -0,0 +1,374 @@
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -31,7 +31,18 @@
#include <linux/bug.h>
#include <linux/compiler.h>
#include <linux/sort.h>
+
+#ifdef CONFIG_GMAC_FOR_BANANAPI
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/mii.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
+#endif
+
+
#include <asm/unified.h>
#include <asm/cp15.h>
@@ -1101,16 +1112,13 @@
seq_printf(m, "Hardware\t: %s\n", machine_name);
seq_printf(m, "Revision\t: %04x\n", system_rev);
+#ifdef CONFIG_GMAC_FOR_BANANAPI
+ seq_printf(m, "Serial\t\t: %08x%08x%08x%08x\n", readl(SW_VA_SID_IO_BASE+0x0C),
+ readl(SW_VA_SID_IO_BASE+0x08), readl(SW_VA_SID_IO_BASE+0x04), readl(SW_VA_SID_IO_BASE));
+#else
seq_printf(m, "Serial\t\t: %08x%08x\n",
system_serial_high, system_serial_low);
-
- #define SW_VA_SID_IO_BASE 0xf1c23800
- seq_printf(m, "Chipid\t\t: %08x-%08x-%08x-%08x\n",
- readl(SW_VA_SID_IO_BASE),
- readl(SW_VA_SID_IO_BASE + 0x4),
- readl(SW_VA_SID_IO_BASE + 0x8),
- readl(SW_VA_SID_IO_BASE + 0xc)
- );
+#endif
return 0;
}
--- a/arch/arm/plat-sunxi/sys_config.c
+++ b/arch/arm/plat-sunxi/sys_config.c
@@ -145,6 +145,7 @@
return gpio_count;
}
+EXPORT_SYMBOL(script_parser_mainkey_get_gpio_count); //Fix the GAMC cannot build as module
int script_parser_mainkey_get_gpio_cfg(char *main_name, void *gpio_cfg, int gpio_count)
{
@@ -179,6 +180,7 @@
return SCRIPT_PARSER_KEY_NOT_FIND;
}
+EXPORT_SYMBOL(script_parser_mainkey_get_gpio_cfg); //Fix the GAMC cannot build as module
/*
*
--- a/drivers/net/ethernet/allwinner/gmac/sunxi_gmac.h
+++ b/drivers/net/ethernet/allwinner/gmac/sunxi_gmac.h
@@ -33,6 +33,9 @@
#include "gmac_base.h"
#define GMAC_RESOURCE_NAME "sunxi_gmac"
+#ifdef CONFIG_GMAC_FOR_BANANAPI
+ #define GMAC_PHY_POWER
+#endif
enum rx_frame_status { /* IPC status */
good_frame = 0,
@@ -132,7 +135,11 @@
void __iomem *gpiobase;
#else
int gpio_cnt;
+#ifdef CONFIG_GMAC_FOR_BANANAPI
+ user_gpio_set_t *gpio_hd;
+#else
unsigned int gpio_handle;
+#endif
#endif
#ifndef CONFIG_GMAC_CLK_SYS
@@ -163,6 +170,9 @@
spinlock_t lock;
spinlock_t tx_lock;
struct gmac_plat_data *plat;
+#ifdef GMAC_PHY_POWER
+ u32 gpio_power_hd;
+#endif
//struct dma_features dma_cap;
};
--- a/drivers/net/ethernet/allwinner/gmac/Kconfig
+++ b/drivers/net/ethernet/allwinner/gmac/Kconfig
@@ -29,6 +29,13 @@
If you want to use the system interface, select it. If not, the
driver will control the clock by ioremap.
+config GMAC_FOR_BANANAPI
+ bool "modified gmac driver for Bananapi"
+ depends on SUNXI_GMAC
+ ---help---
+ If you want to compile the firmware for Bananapi, you should select it.
+ The driver will be modified to be suit for the Bananapi' gmac.
+
choice
prompt "Select the DMA TX/RX descriptor operating modes"
depends on SUNXI_GMAC
--- a/drivers/net/ethernet/allwinner/gmac/gmac_plat.c
+++ b/drivers/net/ethernet/allwinner/gmac/gmac_plat.c
@@ -34,6 +34,10 @@
#include <mach/gpio.h>
#include <mach/irqs.h>
#include <mach/clock.h>
+#ifdef CONFIG_GMAC_FOR_BANANAPI
+#include <mach/includes.h>
+#include <plat/sys_config.h> //Fix the GAMC cannot build as module
+#endif
#include "sunxi_gmac.h"
@@ -43,11 +47,64 @@
int ret = 0;
#ifndef CONFIG_GMAC_SCRIPT_SYS
+#ifdef CONFIG_GMAC_FOR_BANANAPI
+ int reg_value;
+ /* configure system io */
+ if(priv->gpiobase){
+ writel(0x22222222, priv->gpiobase + PA_CFG0);
+
+ writel(0x22222222, priv->gpiobase + PA_CFG1);
+
+ writel(0x00000022, priv->gpiobase + PA_CFG2);
+#else
if(priv->gpiobase){
writel(0x55555555, priv->gpiobase + PA_CFG0);
writel(0x50555505, priv->gpiobase + PA_CFG1);
writel(0x00000005, priv->gpiobase + PA_CFG2);
}
+#endif
+#else
+#ifdef CONFIG_GMAC_FOR_BANANAPI
+ int i = 0;
+ int gpio_tmp;
+
+ priv->gpio_cnt = script_parser_mainkey_get_gpio_count("gmac_para");
+ priv->gpio_hd = kmalloc(sizeof(user_gpio_set_t)*priv->gpio_cnt, GFP_KERNEL);
+ printk("gmac_para gpio count is %d\n", priv->gpio_cnt);
+ script_parser_mainkey_get_gpio_cfg("gmac_para", priv->gpio_hd, priv->gpio_cnt);
+ for (i = 0; i < priv->gpio_cnt; i++){
+ gpio_tmp = gpio_request_ex("gmac_para", priv->gpio_hd[i].gpio_name);
+ if (gpio_tmp){
+ gpio_set_one_pin_status(gpio_tmp, &priv->gpio_hd[i], priv->gpio_hd[i].gpio_name, 1);
+ }else{
+ printk("gpio_set_one_pin_status error\n");
+ }
+ }
+#ifdef GMAC_PHY_POWER
+ priv->gpio_power_hd= gpio_request_ex("gmac_phy_power", "gmac_phy_power_en");
+#endif
+gpio_err:
+ if(unlikely(ret)){
+ gpio_free(priv->gpio_hd);
+ priv->gpio_hd = NULL;
+ priv->gpio_cnt = 0;
+ }
+#ifdef SUN7i_GMAC_FPGA
+ reg_value = readl(IO_ADDRESS(GPIO_BASE + 0x108));
+ reg_value |= 0x1<<20;
+ writel(reg_value, IO_ADDRESS(GPIO_BASE + 0x108));
+
+ reg_value = readl(IO_ADDRESS(GPIO_BASE + 0x10c));
+ reg_value &= ~(0x1<<29);
+ writel(reg_value, IO_ADDRESS(GPIO_BASE + 0x10c));
+
+ mdelay(200);
+
+ reg_value = readl(IO_ADDRESS(GPIO_BASE + 0x10c));
+ reg_value |= 0x1<<29;
+ writel(reg_value, IO_ADDRESS(GPIO_BASE + 0x10c));
+#endif
+
#else
priv->gpio_handle = gpio_request_ex("gmac_para", NULL);
if(!priv->gpio_handle) {
@@ -55,6 +112,7 @@
ret = -1;
}
#endif
+#endif
return ret;
}
@@ -177,8 +235,17 @@
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
release_mem_region(res->start, resource_size(res));
#else
+ #ifdef CONFIG_GMAC_FOR_BANANAPI
+ int i;
+ if (priv->gpio_hd){
+ gpio_free(priv->gpio_hd);
+ priv->gpio_hd = NULL;
+ priv->gpio_cnt = 0;
+ }
+ #else
gpio_release(priv->gpio_handle, 0);
#endif
+#endif
iounmap(priv->gmac_clk_reg);
--- a/drivers/net/ethernet/allwinner/gmac/gmac_core.c
+++ b/drivers/net/ethernet/allwinner/gmac/gmac_core.c
@@ -38,7 +38,6 @@
#include <linux/gpio.h>
#include <plat/sys_config.h>
-#include <plat/platform.h>
#include <mach/gpio.h>
#include <mach/clock.h>
@@ -51,6 +50,10 @@
#include "gmac_desc.h"
#include "gmac_ethtool.h"
+#ifdef CONFIG_GMAC_FOR_BANANAPI
+#include <plat/platform.h>
+#endif
+
#undef GMAC_DEBUG
#ifdef GMAC_DEBUG
#define DBG(nlevel, klevel, fmt, args...) \
@@ -79,7 +82,8 @@
#define GMAC_ALIGN(x) L1_CACHE_ALIGN(x)
#define JUMBO_LEN 9000
-static char *mac_str = ":";
+#define GMAC_MAC_ADDRESS "00:00:00:00:00:00"
+static char *mac_str = GMAC_MAC_ADDRESS;
module_param(mac_str, charp, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(mac_str, "MAC Address String.(xx:xx:xx:xx:xx:xx)");
@@ -217,6 +221,9 @@
|| phy_interface == PHY_INTERFACE_MODE_GMII)
priv_clk_reg |= 0x00000002;
+#ifdef CONFIG_GMAC_FOR_BANANAPI
+ priv_clk_reg |= (0x00000003<<10);
+#endif
writel(priv_clk_reg, priv->gmac_clk_reg + GMAC_CLK_REG);
}
@@ -773,21 +780,17 @@
static void gmac_check_ether_addr(struct gmac_priv *priv)
{
+ int i;
+ char *p = mac_str;
/* verify if the MAC address is valid, in case of failures it
* generates a random MAC address */
if (!is_valid_ether_addr(priv->ndev->dev_addr)) {
- if (strlen(mac_str) == 17) {
- int i;
- char *p = mac_str;
-
- pr_info("gmac: use mac address from mac_str\n");
- for (i=0; i<6; i++,p++)
- priv->ndev->dev_addr[i] = simple_strtoul(p, &p, 16);
- }
-
+#ifdef CONFIG_GMAC_FOR_BANANAPI
+ gmac_get_umac_addr((void __iomem *)
+ priv->ndev->base_addr,
+ priv->ndev->dev_addr, 0);
if (!is_valid_ether_addr(priv->ndev->dev_addr)) {
unsigned int reg_val;
-
reg_val = readl(SW_VA_SID_IO_BASE);
pr_info("gmac: use mac address from chipid\n");
priv->ndev->dev_addr[0] = 0x02; /* Non OUI / registered MAC address */
@@ -803,12 +806,47 @@
pr_info("gmac: use random mac address\n");
}
}
- } else {
- pr_info("gmac: use mac address from cmdline\n");
+#else
+ if (!is_valid_ether_addr(priv->ndev->dev_addr)) {
+ for (i=0; i<6; i++,p++)
+ priv->ndev->dev_addr[i] = simple_strtoul(p, &p, 16);
+ }
+
+ if (!is_valid_ether_addr(priv->ndev->dev_addr))
+ random_ether_addr(priv->ndev->dev_addr);
+#endif
+ }
+ printk(KERN_WARNING "%s: device MAC address %pM\n", priv->ndev->name,
+ priv->ndev->dev_addr);
+}
+
+#ifdef GMAC_PHY_POWER
+void gmac_phy_power_en(struct gmac_priv *priv)
+{
+ if(!priv) return;
+
+ if (priv->gpio_power_hd){
+ printk("GMAC gpio_power_hd:gpio_direction_output\n");
+ gpio_set_one_pin_io_status(priv->gpio_power_hd, 1, "gmac_phy_power_en");//set the gpio to output
+ gpio_write_one_pin_value(priv->gpio_power_hd, 1, "gmac_phy_power_en");
+ mdelay(200);
+ }
+
+ return;
+}
+
+void gmac_phy_power_disable(struct gmac_priv *priv)
+{
+ if(!priv) return;
+
+ if (priv->gpio_power_hd){
+ gpio_write_one_pin_value(priv->gpio_power_hd, 0, "gmac_phy_power_en");
}
- pr_info("gmac: device MAC address %pM\n", priv->ndev->dev_addr);
+ return;
+
}
+#endif
/**
* gmac_open - open entry point of the driver
@@ -824,9 +862,14 @@
struct gmac_priv *priv = netdev_priv(ndev);
int ret;
- gmac_clk_ctl(priv, 1);
- //gmac_check_ether_addr(priv);
+#ifdef GMAC_PHY_POWER
+ gmac_phy_power_en(priv);
+#endif
+ gmac_clk_ctl(priv, 1);
+#ifdef GMAC_PHY_POWER
+ gmac_check_ether_addr(priv);
+#endif
/* MDIO bus Registration */
ret = gmac_mdio_register(ndev);
if (ret < 0) {
@@ -964,6 +1007,10 @@
gmac_mdio_unregister(ndev);
gmac_clk_ctl(priv, 0);
+#ifdef GMAC_PHY_POWER
+ gmac_phy_power_disable(priv);
+#endif
+
return 0;
}
@@ -1742,6 +1789,9 @@
static void __exit gmac_remove(void)
{
+#ifdef CONFIG_GMAC_SCRIPT_SYS
+ script_parser_fetch("gmac_para", "gmac_used", &gmac_used, 1);
+#endif
if (gmac_used != 1) {
pr_info("gmac is disabled\n");
return;

17
patch/gpio.patch Normal file
View File

@@ -0,0 +1,17 @@
--- a/drivers/gpio/gpio-sunxi.c
+++ b/drivers/gpio/gpio-sunxi.c
@@ -182,11 +182,9 @@ static int sunxi_gpio_request(struct gpio_chip *chip, unsigned offset)
if ((offset > chip->ngpio - 1) || (offset < 0))
return -EINVAL;
- /* Set sysfs exported gpio name (example "gpio254_ph20") */
- sprintf((char *)(chip->names[offset]), "gpio%d_p%c%d",
- offset+chip->base,
- 'a'+sgpio->data[offset].info.port-1,
- sgpio->data[offset].info.port_num);
+ /* Set sysfs exported gpio name (example "gpio254") */
+ sprintf((char *)(chip->names[offset]), "gpio%d",
+ offset+chip->base);
sgpio->data[offset].gpio_handler = gpio_request_ex("gpio_para",
sgpio->data[offset].pin_name);

21
patch/small_lcd_drivers.patch Normal file
View File

@@ -0,0 +1,21 @@
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -4,6 +4,7 @@
# Each configuration option enables a list of files.
+obj-y += fbtft/
obj-$(CONFIG_VGASTATE) += vgastate.o
obj-y += fb_notify.o
obj-$(CONFIG_FB) += fb.o
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -17,6 +17,8 @@ config SH_LCD_MIPI_DSI
source "drivers/char/agp/Kconfig"
+source "drivers/video/fbtft/Kconfig"
+
source "drivers/gpu/vga/Kconfig"
source "drivers/gpu/drm/Kconfig"

2182
patch/spi.patch Normal file
View File

File diff suppressed because it is too large Load Diff