sunxi-6.16: add armbian patches

patch/kernel/archive/sunxi-6.16/patches.armbian/Input-axp20x-pek-allow-wakeup-after-shutdown.patch

@@ -0,0 +1,48 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 2 Jan 2021 15:52:27 -0600
+Subject: Input: axp20x-pek - allow wakeup after shutdown
+
+While the AXP20x PMIC handles the power button itself after shutting
+down, it is not always possible to use the PMIC's built-in shutdown
+feature, such as when other wakeup sources are needed (for example, an
+IR remote or wake-on-LAN) that require firmware support. In that case,
+the PMIC remains on, but suspended, until the board is powered back on.
+
+During this "fake" off state, IRQ configuration is similar to system
+sleep, where enable_irq_wake() must be call on an IRQ for it to be
+wakeup capable. Run the suspend callback to arm the power button IRQs
+during the shutdown process, so the power button works in this state.
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ drivers/input/misc/axp20x-pek.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/drivers/input/misc/axp20x-pek.c b/drivers/input/misc/axp20x-pek.c
+index 111111111111..222222222222 100644
+--- a/drivers/input/misc/axp20x-pek.c
++++ b/drivers/input/misc/axp20x-pek.c
+@@ -384,6 +384,11 @@ static const struct dev_pm_ops axp20x_pek_pm_ops = {
+ 	.resume_noirq = pm_sleep_ptr(axp20x_pek_resume_noirq),
+ };
+ 
++static void axp20x_pek_shutdown(struct platform_device *pdev)
++{
++	axp20x_pek_suspend(&pdev->dev);
++}
++
+ static const struct platform_device_id axp_pek_id_match[] = {
+ 	{
+ 		.name = "axp20x-pek",
+@@ -399,6 +404,7 @@ MODULE_DEVICE_TABLE(platform, axp_pek_id_match);
+ 
+ static struct platform_driver axp20x_pek_driver = {
+ 	.probe		= axp20x_pek_probe,
++	.shutdown	= axp20x_pek_shutdown,
+ 	.id_table	= axp_pek_id_match,
+ 	.driver		= {
+ 		.name		= "axp20x-pek",
+-- 
+Armbian
+