config/version: set version to 4.1.6

Signed-off-by: Stephan Raue <stephan@openelec.tv>

CONTRIBUTING.md

@@ -35,12 +35,6 @@ Feature requests are great, but they usually end up lying around the issue
 tracker indefinitely. Sending a pull request is a much better way of getting a
 particular feature into OpenELEC.
 
-Please dont ask us to add 3rdparty drivers unless you are the maintainer/developer of the driver,
-we have no manpower to support a non-mainlined kernel driver for your hardware.
-However, OpenELEC comes with minimal set of kernel drivers enabled, if you are sure that your hardware
-is supported in mainline kernel, feel free to send us a Pull Request to enable it in our
-kernel defconfigs. We are always happy to support known-working hardware.
-
 ### Reporting build failures
 
 As buildsystem / core packages (toolchain) / random libraries change from time to time, it is required

Makefile

@@ -11,12 +11,12 @@ release:
 image:
 	./scripts/image mkimage
 
+image-efi:
+	./scripts/image mkimage efi
+
 noobs:
 	./scripts/image noobs
 
-amlpkg:
-	./scripts/image amlpkg
-
 clean:
 	rm -rf $(BUILD_DIRS)/* $(BUILD_DIRS)/.stamps
 

README.md

@@ -2,8 +2,8 @@
 
 # OpenELEC - Open Embedded Linux Entertainment Center
 
-OpenELEC runs [Kodi](http://kodi.tv), an award-winning free and open source (GPL) software media 
-player and entertainment hub for digital media. For more info see http://kodi.tv .
+OpenELEC runs [XBMC](http://xbmc.org), an award-winning free and open source (GPL) software media 
+player and entertainment hub for digital media. For more info see http://xbmc.org .
 The base system has been designed and built from the ground up to be as 
 efficient as possible – consuming only tiny disk and memory footprints and
 providing cutting edge hardware support to deliver a set-top box experience.
@@ -16,6 +16,10 @@ providing cutting edge hardware support to deliver a set-top box experience.
 
 * Please read the instructions in our wiki (http://wiki.openelec.tv/index.php?title=Installation) on how to install.
 
+**Known issues**
+
+* Testing snapshot
+
 **License**
 
 * OpenELEC is released under [GPLv2](http://www.gnu.org/licenses/gpl-2.0.html). Please refer to the "licenses" folder and 
@@ -40,15 +44,16 @@ providing cutting edge hardware support to deliver a set-top box experience.
 
 **Features**
 
-* System size ~ 90 - 170MB
+* System size ~ 90 - 130MB
 * Minimal hardware requirements
 * Ultra fast boot
-* Simple configuration via Kodi itself
+* Optimized builds for platforms such as ION, Intel, Fusion
+* Simple configuration via XBMC itself
 * Plug and Play external storage
 
 **Software**
 
-* Kodi HTPC software – View/Manage all your media.
+* XBMC HTPC software – View/Manage all your media.
 * Samba server – File transfer from any PC client
 * SSH server – Remote console access for debugging
 * IR/Bluetooth Remote Control
@@ -63,12 +68,13 @@ providing cutting edge hardware support to deliver a set-top box experience.
   All data transfered to the machine will go here, the rest of the system is
   read-only with the exception of /var (containing runtime configuration data).
 * Manual update/downgrade procedure is as follows:
-  Copy the snapshot (.tar) to the 'Update' network share (or /storage/.update) on
+  Extract the snapshot and navigate to the 'target' directory.
+  Copy KERNEL and SYSTEM along with KERNEL.md5 and SYSTEM.md5 to the 'Update' network share (or /storage/.update) on
   your openelec machine. Your system will automatically upgrade during the 
   next reboot.
 * Automatic mounting of filesystems is supported. Devices such as USB Flash 
   sticks can be plugged into a running machine and will be mounted to /media,
-  showing up in Kodi’s GUI.
+  showing up in xbmc’s GUI.
 * Comments and questions are more than welcome, help is even better and patches 
   are absolutely perfect!!
 

TODO

@@ -0,0 +1,8 @@
+ncurses-5.8/5.9:
+  - segfaults in nano and dialog -> using ncurses-5.7
+
+irserver:
+  - rework irserver/init.d for systemd
+
+settings addon:
+  - remove ps3 sleep? should be fixed in bluez 5.13/5.14

config/addon/addon.xml

@@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <addon id="@PKG_ADDON_ID@"
-       name="@ADDON_NAME@"
+       name="@PKG_NAME@"
        version="@ADDON_VERSION@"
        provider-name="@PROVIDER_NAME@">
   <requires>
@@ -8,8 +8,11 @@
     <import addon="xbmc.python" version="2.1.0"/>
 @REQUIRES@
   </requires>
-  <extension point="xbmc.python.module" library="lib/">
+  <extension point="@PKG_ADDON_TYPE@"
+             library="default.py">
+        <provides>executable</provides>
   </extension>
+@EXTENSIONS@
   <extension point="xbmc.addon.metadata">
     <summary>@PKG_SHORTDESC@</summary>
     <description>

config/addon/xbmc.python.script.xml

@@ -1,24 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
-<addon id="@PKG_ADDON_ID@"
-       name="@ADDON_NAME@"
-       version="@ADDON_VERSION@"
-       provider-name="@PROVIDER_NAME@">
-  <requires>
-    <import addon="os.openelec.tv" version="@OS_VERSION@"/>
-    <import addon="xbmc.python" version="2.1.0"/>
-@REQUIRES@
-  </requires>
-  <extension point="xbmc.python.script" library="default.py">
-    <provides>@PKG_ADDON_PROVIDES@</provides>
-  </extension>
-  <extension point="xbmc.addon.metadata">
-    <summary>@PKG_SHORTDESC@</summary>
-    <description>
-@PKG_LONGDESC@
-    </description>
-    <disclaimer>
-@PKG_DISCLAIMER@
-    </disclaimer>
-    <platform>all</platform>
-  </extension>
-</addon>

config/addon/xbmc.service.xml

@@ -1,24 +0,0 @@
-<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
-<addon id="@PKG_ADDON_ID@"
-       name="@ADDON_NAME@"
-       version="@ADDON_VERSION@"
-       provider-name="@PROVIDER_NAME@">
-  <requires>
-    <import addon="os.openelec.tv" version="@OS_VERSION@"/>
-    <import addon="xbmc.python" version="2.1.0"/>
-@REQUIRES@
-  </requires>
-  <extension point="xbmc.service" library="default.py">
-    <provides>@PKG_ADDON_PROVIDES@</provides>
-  </extension>
-  <extension point="xbmc.addon.metadata">
-    <summary>@PKG_SHORTDESC@</summary>
-    <description>
-@PKG_LONGDESC@
-    </description>
-    <disclaimer>
-@PKG_DISCLAIMER@
-    </disclaimer>
-    <platform>all</platform>
-  </extension>
-</addon>

config/arch.arm

@@ -32,9 +32,12 @@
       SIMD_SUPPORT="no"
       ;;
     cortex-a7|cortex-a15)
-      TARGET_SUBARCH=armv7ve
+      TARGET_SUBARCH=armv7-a
       TARGET_ABI=eabi
-      TARGET_EXTRA_FLAGS="-mcpu=$TARGET_CPU"
+      # It's not currently possible to specify the exact architecture variant (-mcpu)
+      # that A7/A15 supports in the command line so use -mtune here.
+      # see http://gcc.gnu.org/bugzilla/show_bug.cgi?id=57907
+      TARGET_EXTRA_FLAGS="-mtune=$TARGET_CPU"
       TARGET_FPU_FLAGS="-mfloat-abi=$TARGET_FLOAT -mfpu=$TARGET_FPU"
       SIMD_SUPPORT="yes"
       ;;

config/arch.i386

@@ -0,0 +1,14 @@
+# determines TARGET_CPU, if not forced by user
+  if [ -z "$TARGET_CPU" ]; then
+    TARGET_CPU=i686
+  fi
+
+# determine architecture's family
+  TARGET_SUBARCH=i686
+
+# setup ARCH specific *FLAGS
+  TARGET_CFLAGS="-march=$TARGET_CPU -m32"
+  TARGET_LDFLAGS="-march=$TARGET_CPU -m32"
+
+# build with SIMD support ( yes / no )
+  SIMD_SUPPORT="yes"

config/functions

@@ -2,8 +2,6 @@ setup_toolchain() {
   if [ "$1" = target ]; then
     export DESTIMAGE="target"
 
-    unset CPP
-
     export CC=$TARGET_CC
     export CXX=$TARGET_CXX
     export LD=$TARGET_LD
@@ -28,8 +26,6 @@ setup_toolchain() {
   elif [ "$1" = host ]; then
     export DESTIMAGE="host"
 
-    unset CPP
-
     export AWK=$HOST_AWK
     export CC=$HOST_CC
     export CXX=$HOST_CXX
@@ -55,22 +51,12 @@ setup_toolchain() {
 }
 
 kernel_path() {
-  if [ -e $ROOT/projects/$PROJECT/packages/linux/package.mk ]; then
-    . $ROOT/projects/$PROJECT/packages/linux/package.mk
-  else
-    . $ROOT/packages/linux/package.mk
-  fi
-
+  . $ROOT/packages/linux/package.mk
   echo $ROOT/$BUILD/${PKG_NAME}-${PKG_VERSION}
 }
 
 kernel_version() {
-  if [ -e $ROOT/projects/$PROJECT/packages/linux/package.mk ]; then
-    . $ROOT/projects/$PROJECT/packages/linux/package.mk
-  else
-    . $ROOT/packages/linux/package.mk
-  fi
-
+  . $ROOT/packages/linux/package.mk
   echo ${PKG_VERSION}
 }
 
@@ -82,16 +68,10 @@ get_module_dir() {
 # get package's build dir
 get_build_dir() {
   if [ ! -z $1 ] ; then
-    local _PKG_DIR=$(find $ROOT/projects/$PROJECT/packages -name $1 2>/dev/null)
-    if [ -d "$_PKG_DIR" -a -f $_PKG_DIR/package.mk ] ; then
+    local _PKG_DIR=$(find $ROOT/packages -name $1)
+    if [ -d $_PKG_DIR -a -f $_PKG_DIR/package.mk ] ; then
       . $_PKG_DIR/package.mk
-    else
-      local _PKG_DIR=$(find $ROOT/packages -name $1 2>/dev/null)
-      if [ -d "$_PKG_DIR" -a -f $_PKG_DIR/package.mk ] ; then
-        . $_PKG_DIR/package.mk
-      fi
     fi
-
     echo $ROOT/$BUILD/${PKG_NAME}-${PKG_VERSION}
   fi
 }
@@ -277,12 +257,9 @@ dashes="==========================="
 }
 
 show_config() {
-  # load graphic configuration
-    get_graphicdrivers
-
   dashes="==========================="
   config_message="$config_message\n $dashes$dashes$dashes"
-  config_message="$config_message\n Configuration for $DISTRONAME ($([ "$OFFICIAL" = "yes" ] && echo "official" || echo "community"))"
+  config_message="$config_message\n Configuration for $DISTRONAME ($([ "$OFFICIAL" = "yes" ] && echo "official" || echo "unofficial"))"
   config_message="$config_message\n $dashes$dashes$dashes"
 
   # Build options
@@ -307,24 +284,24 @@ show_config() {
   config_message="$config_message\n\n Graphic configuration:"
   config_message="$config_message\n $dashes$dashes"
 
-  if [ "$DISPLAYSERVER" = "x11" ] ; then
-    config_message="$config_message\n - Xorg Graphic Drivers:\t\t $GRAPHIC_DRIVERS"
-    config_message="$config_message\n - XORG Composite support:\t\t $COMPOSITE_SUPPORT"
-    config_message="$config_message\n - WindowManager:\t\t\t $WINDOWMANAGER"
-  fi
+  config_message="$config_message\n - XORG support:\t\t\t $XORG_SUPPORT"
+  config_message="$config_message\n - XORG Composite support:\t\t $COMPOSITE_SUPPORT"
+  config_message="$config_message\n - XORG Xinerama support:\t\t $XINERAMA_SUPPORT"
+  config_message="$config_message\n - SDL support:\t\t\t\t $SDL_SUPPORT"
   config_message="$config_message\n - OpenGL (GLX) support (provider):\t $OPENGL_SUPPORT ($OPENGL)"
   config_message="$config_message\n - OpenGLES support (provider):\t\t $OPENGLES_SUPPORT ($OPENGLES)"
-  config_message="$config_message\n - uvesafb support:\t\t\t $UVESAFB_SUPPORT"
+  config_message="$config_message\n - WindowManager:\t\t\t $WINDOWMANAGER"
+  config_message="$config_message\n - Xorg Graphic Drivers:\t\t $GRAPHIC_DRIVERS"
 
   # Hardware decoder support
 
   config_message="$config_message\n\n Hardware decoder configuration:"
   config_message="$config_message\n $dashes$dashes"
 
-  config_message="$config_message\n - Kodi Player driver:\t\t\t $KODIPLAYER_DRIVER"
-  config_message="$config_message\n - VAAPI Support:\t\t\t $VAAPI_SUPPORT"
-  config_message="$config_message\n - VDPAU Support:\t\t\t $VDPAU_SUPPORT"
-  config_message="$config_message\n - DCA decoder Support:\t\t\t $DCADEC_SUPPORT"
+  config_message="$config_message\n - Broadcom CrystalHD Decoder:\t\t $CRYSTALHD"
+  config_message="$config_message\n - XBMC Player driver:\t\t\t $XBMCPLAYER_DRIVER"
+  config_message="$config_message\n - VAAPI Support:\t\t\t $VAAPI"
+  config_message="$config_message\n - VDPAU Support:\t\t\t $VDPAU"
 
   # Input device configuration
 
@@ -335,7 +312,7 @@ show_config() {
   config_message="$config_message\n - ATV Remote support:\t\t\t $ATVCLIENT_SUPPORT"
   config_message="$config_message\n - CEC Adapter support:\t\t\t $CEC_SUPPORT"
   config_message="$config_message\n - IRTrans support:\t\t\t $IRSERVER_SUPPORT"
-  config_message="$config_message\n - Kodi Joystick support:\t\t $JOYSTICK_SUPPORT"
+  config_message="$config_message\n - XBMC Joystick support:\t\t $JOYSTICK_SUPPORT"
 
   # Misc. hardware configuration
 
@@ -344,7 +321,9 @@ show_config() {
 
   config_message="$config_message\n - ALSA support:\t\t\t $ALSA_SUPPORT"
   config_message="$config_message\n - Pulseaudio support:\t\t\t $PULSEAUDIO_SUPPORT"
+  config_message="$config_message\n - Blu-Ray support:\t\t\t $BLURAY_SUPPORT"
   config_message="$config_message\n - Bluetooth support:\t\t\t $BLUETOOTH_SUPPORT"
+  config_message="$config_message\n - Hardware Sensors support:\t\t $SENSOR_SUPPORT"
   config_message="$config_message\n - LCD drivers:\t\t\t\t $LCD_DRIVER"
 
   for config_driver in $ADDITIONAL_DRIVERS; do
@@ -355,20 +334,22 @@ show_config() {
     config_message="$config_message\n - Include firmware:\t\t\t $config_firmware"
   done
 
-  for config_modules in $INITRAMFS_MODULES; do
-    config_message="$config_message\n - Initramfs modules:\t\t\t $config_modules"
-  done
-
   # Network service configuration
 
   config_message="$config_message\n\n Network service configuration:"
   config_message="$config_message\n $dashes$dashes"
 
   config_message="$config_message\n - Avahi (Zeroconf) support:\t\t $AVAHI_DAEMON"
-  config_message="$config_message\n - NFS mounting support:\t\t $NFS_SUPPORT"
-  config_message="$config_message\n - SAMBA mounting support:\t\t $SAMBA_SUPPORT"
   config_message="$config_message\n - SAMBA server support:\t\t $SAMBA_SERVER"
   config_message="$config_message\n - SFTP server support:\t\t\t $SFTP_SERVER"
+  config_message="$config_message\n - PPTP support:\t\t\t $PPTP_SUPPORT"
+  config_message="$config_message\n - OpenVPN support:\t\t\t $OPENVPN_SUPPORT"
+  config_message="$config_message\n - XBMC Airplay support:\t\t $AIRPLAY_SUPPORT"
+  config_message="$config_message\n - XBMC Airtunes support:\t\t $AIRTUNES_SUPPORT"
+  config_message="$config_message\n - XBMC AFP support:\t\t\t $AFP_SUPPORT"
+  config_message="$config_message\n - XBMC NFS support:\t\t\t $NFS_SUPPORT"
+  config_message="$config_message\n - XBMC SAMBA client support:\t\t $SAMBA_SUPPORT"
+  config_message="$config_message\n - XBMC Webserver support:\t\t $WEBSERVER"
 
   # OS configuration
 
@@ -378,10 +359,10 @@ show_config() {
   config_message="$config_message\n - OEM Support:\t\t\t\t $OEM_SUPPORT"
   config_message="$config_message\n - Default ROOT Password:\t\t $ROOT_PASSWORD"
   config_message="$config_message\n - Bootloader:\t\t\t\t $BOOTLOADER"
-  if [ "$BOOTLOADER" = "u-boot" ]; then
-    config_message="$config_message\n   - U-Boot configuration:\t\t $UBOOT_CONFIG"
-    config_message="$config_message\n   - U-Boot config file:\t\t $UBOOT_CONFIGFILE"
-  fi
+if [ "$BOOTLOADER" = "u-boot" ]; then
+  config_message="$config_message\n - U-Boot configuration:\t\t $UBOOT_CONFIG"
+  config_message="$config_message\n - U-Boot config file:\t\t\t $UBOOT_CONFIGFILE"
+fi
   config_message="$config_message\n - UDevil support:\t\t\t $UDEVIL"
   config_message="$config_message\n - Installer support:\t\t\t $INSTALLER_SUPPORT"
 
@@ -391,43 +372,31 @@ show_config() {
   config_message="$config_message\n $dashes$dashes"
 
   config_message="$config_message\n - Swap Support:\t\t\t $SWAP_SUPPORT"
-  if [ "$SWAP_SUPPORT" = "yes" ]; then
-    config_message="$config_message\n   - Swapfile default size:\t\t $SWAPFILESIZE"
-  fi
+if [ "$SWAP_SUPPORT" = "yes" ]; then
+  config_message="$config_message\n - Swapfile default size:\t\t $SWAPFILESIZE"
+fi
   config_message="$config_message\n - exFAT Support (via Fuse):\t\t $EXFAT"
   config_message="$config_message\n - NTFS Support (via Fuse):\t\t $NTFS3G"
   config_message="$config_message\n - Install HFS Tools:\t\t\t $HFSTOOLS"
 
-  # Kodi configuration
+  # XBMC configuration
 
-  config_message="$config_message\n\n Kodi configuration:"
+  config_message="$config_message\n\n XBMC configuration:"
   config_message="$config_message\n $dashes$dashes"
 
-  config_message="$config_message\n - Kodi version:\t\t\t $MEDIACENTER"
-  config_message="$config_message\n - Kodi nonfree support:\t\t $KODI_NONFREE_SUPPORT"
-  config_message="$config_message\n - Kodi Blu-Ray support:\t\t $KODI_BLURAY_SUPPORT"
-  if [ "$KODI_BLURAY_SUPPORT" = "yes" ] ; then
-    config_message="$config_message\n   - Bluray BD+ support:\t\t $BLURAY_BDPLUS_SUPPORT"
-    config_message="$config_message\n   - Bluray AACS support:\t\t $BLURAY_AACS_SUPPORT"
-  fi
-  config_message="$config_message\n - Kodi DVDCSS support:\t\t\t $KODI_DVDCSS_SUPPORT"
-  config_message="$config_message\n - Kodi Airplay support:\t\t $KODI_AIRPLAY_SUPPORT"
-  config_message="$config_message\n - Kodi Airtunes support:\t\t $KODI_AIRTUNES_SUPPORT"
-  config_message="$config_message\n - Kodi NFS support:\t\t\t $KODI_NFS_SUPPORT"
-  config_message="$config_message\n - Kodi MySQL support:\t\t\t $KODI_MYSQL_SUPPORT"
-  config_message="$config_message\n - Kodi Optical Drive support:\t\t $KODI_OPTICAL_SUPPORT"
-  config_message="$config_message\n - Kodi SAMBA client support:\t\t $KODI_SAMBA_SUPPORT"
-  config_message="$config_message\n - Kodi SSH client support:\t\t $KODI_SSHLIB_SUPPORT"
-  config_message="$config_message\n - Kodi UPNP support:\t\t\t $KODI_UPNP_SUPPORT"
-  config_message="$config_message\n - Kodi Webserver support:\t\t $KODI_WEBSERVER_SUPPORT"
-
+  config_message="$config_message\n - XBMC version:\t\t\t $MEDIACENTER"
+  config_message="$config_message\n - XBMC nonfree support:\t\t $NONFREE_SUPPORT"
+  config_message="$config_message\n - XBMC DVDCSS support:\t\t\t $DVDCSS_SUPPORT"
 
   for config_skin in $SKINS; do
     config_message="$config_message\n - Include Skin:\t\t\t $config_skin"
   done
 
   config_message="$config_message\n - Default Skin:\t\t\t $SKIN_DEFAULT"
-  config_message="$config_message\n - Include extra fonts:\t\t\t $KODI_EXTRA_FONTS"
+  config_message="$config_message\n - Include extra fonts:\t\t\t $XBMC_EXTRA_FONTS"
+  config_message="$config_message\n - Include RSXS Screensaver:\t\t $XBMC_SCR_RSXS"
+  config_message="$config_message\n - Include ProjectM Visualization:\t $XBMC_VIS_PROJECTM"
+  config_message="$config_message\n - Include Goom Visualization:\t\t $XBMC_VIS_GOOM"
 
   config_message="$config_message\n"
   config_message="$config_message\n $dashes$dashes$dashes"
@@ -435,5 +404,5 @@ show_config() {
   config_message="$config_message\n $dashes$dashes$dashes"
   config_message="$config_message\n\n\n"
 
-  echo -e "$config_message"
+  echo -e $config_message
 }

config/graphic

@@ -1,3 +1,9 @@
+if [ "$DISPLAYSERVER" = "x11" ]; then
+  SDL_SUPPORT="yes"
+else
+  SDL_SUPPORT="no"
+fi
+
 if [ "$OPENGL" = no ]; then
   OPENGL_SUPPORT="no"
 else
@@ -10,34 +16,55 @@ else
   OPENGLES_SUPPORT="yes"
 fi
 
+if [ "$SDL_SUPPORT" = no ]; then
+  JOYSTICK_SUPPORT="no"
+fi
+
+if [ "$OPENGL_SUPPORT" = no ]; then
+  XBMC_SCR_RSXS="no"
+  XBMC_VIS_PROJECTM="no"
+  XBMC_VIS_GOOM="no"
+fi
+
 get_graphicdrivers() {
   if [ "$GRAPHIC_DRIVERS" = "all" ]; then
     GRAPHIC_DRIVERS="i915 i965 r200 r300 r600 nvidia"
   fi
 
   for drv in $GRAPHIC_DRIVERS; do
+    if [ "$drv" = "dove" ]; then
+      XORG_DRIVERS="$XORG_DRIVERS dove"
+    fi
+
     if [ "$drv" = "i915" ]; then
       DRI_DRIVERS="$DRI_DRIVERS,i915"
       XORG_DRIVERS="$XORG_DRIVERS intel"
       COMPOSITE_SUPPORT="yes"
-      VAAPI_SUPPORT="yes"
     fi
 
     if [ "$drv" = "i965" ]; then
       DRI_DRIVERS="$DRI_DRIVERS,i965"
       XORG_DRIVERS="$XORG_DRIVERS intel"
       COMPOSITE_SUPPORT="yes"
-      VAAPI_SUPPORT="yes"
+    fi
+
+    if [ "$drv" = "nouveau" ]; then
+      # DRI_DRIVERS are only used for NV04 - NV20 (which we dont want to support anymore)
+      DRI_DRIVERS="$DRI_DRIVERS"
+      # GALLIUM_DRIVERS are used for all cards from NV30 to nvc0
+      # see also http://nouveau.freedesktop.org/wiki/MesaDrivers/
+      GALLIUM_DRIVERS="$GALLIUM_DRIVERS,nouveau"
+      XORG_DRIVERS="$XORG_DRIVERS nouveau"
+      COMPOSITE_SUPPORT="yes"
+#      LLVM_SUPPORT="yes"
     fi
 
     if [ "$drv" = "nvidia" ]; then
       XORG_DRIVERS="$XORG_DRIVERS nvidia"
-      VDPAU_SUPPORT="yes"
     fi
 
     if [ "$drv" = "nvidia-legacy" ]; then
       XORG_DRIVERS="$XORG_DRIVERS nvidia-legacy"
-      VDPAU_SUPPORT="yes"
     fi
 
     if [ "$drv" = "r200" ]; then
@@ -51,7 +78,6 @@ get_graphicdrivers() {
       XORG_DRIVERS="$XORG_DRIVERS ati"
       LLVM_SUPPORT="yes"
       COMPOSITE_SUPPORT="yes"
-      VDPAU_SUPPORT="yes"
     fi
 
     if [ "$drv" = "r600" ]; then
@@ -59,7 +85,6 @@ get_graphicdrivers() {
       XORG_DRIVERS="$XORG_DRIVERS ati"
       LLVM_SUPPORT="yes"
       COMPOSITE_SUPPORT="yes"
-      VDPAU_SUPPORT="yes"
     fi
 
     if [ "$drv" = "radeonsi" ]; then
@@ -67,7 +92,6 @@ get_graphicdrivers() {
       XORG_DRIVERS="$XORG_DRIVERS ati"
       LLVM_SUPPORT="yes"
       COMPOSITE_SUPPORT="yes"
-      VDPAU_SUPPORT="yes"
     fi
 
   done

config/noobs/os.json

@@ -1,10 +1,7 @@
 {
-  "name": "@DISTRONAME@_@PROJECT@",
+  "name": "@DISTRONAME@",
   "version": "@OPENELEC_VERSION@",
   "release_date": "@RELEASE_DATE@",
   "kernel": "@KERNEL_VERSION@",
-  "description": "@DESCRIPTION@",
-  "username": "root",
-  "password": "@ROOT_PASSWORD@",
-  "supported_hex_revisions": "@NOOBS_HEX@"
+  "description": "@DESCRIPTION@"
 }

config/noobs/partition_setup.sh

@@ -40,7 +40,7 @@ md5sumCheck() {
   )
 }
 
-if [ -z $part1 -o -z $part2 -o -z $id1 -o -z $id2 ]; then
+if [ -z $part1 -o -z $part2 -o -z $id1 -o -z $id2]; then
   echo "error: part1, part2, id1 or id2 not specified"
   echo "actual values:"
   echo "part1:" $part1

config/noobs/partitions.json

@@ -1,7 +1,7 @@
 {
   "partitions": [
     {
-      "label":                     "@DISTRONAME@_@PROJECT@_System",
+      "label":                     "System",
       "filesystem_type":           "FAT",
       "partition_size_nominal":    160,
       "want_maximised":            false,
@@ -9,7 +9,7 @@
       "mkfs_options":              ""
     },
     {
-      "label":                     "@DISTRONAME@_@PROJECT@_Storage",
+      "label":                     "Storage",
       "filesystem_type":           "ext4",
       "partition_size_nominal":    864,
       "want_maximised":            true,

config/options

@@ -1,14 +1,6 @@
 # set default language for buildsystem
   export LC_ALL=C
 
-# determines DISTRO, if not forced by user
-# default is OpenELEC
-if [ -z "$DISTRO" ]; then
-  DISTRO="OpenELEC"
-else
-  DISTRO="$DISTRO"
-fi
-
 # determines PROJECT, if not forced by user
 # default is Generic
 if [ -z "$PROJECT" ]; then
@@ -17,32 +9,21 @@ else
   PROJECT="$PROJECT"
 fi
 
-# determines TARGET_ARCH, if not forced by user (x86_64 / arm)
-# default is x86_64
+# determines TARGET_ARCH, if not forced by user (i386 / x86_64 / arm)
+# default is i386
 if [ -z "$ARCH" ]; then
-  TARGET_ARCH="x86_64"
+  TARGET_ARCH="i386"
 else
   TARGET_ARCH="$ARCH"
 fi
 
 ROOT=`pwd`
-DISTRO_DIR="$ROOT/distributions"
 PROJECT_DIR="$ROOT/projects"
 LINUX_DEPENDS="$PROJECT_DIR/$PROJECT/linux/linux.$TARGET_ARCH.conf $ROOT/packages/linux/package.mk"
 
 # include versioning
   . config/version
 
-# read distro versioning if available
- if [ -f "$DISTRO_DIR/$DISTRO/version" ]; then
-   . $DISTRO_DIR/$DISTRO/version
- fi
-
-# read distro options if available
- if [ -f "$DISTRO_DIR/$DISTRO/options" ]; then
-   . $DISTRO_DIR/$DISTRO/options
- fi
-
 # read project options if available
  if [ -f "$PROJECT_DIR/$PROJECT/options" ]; then
    . $PROJECT_DIR/$PROJECT/options
@@ -52,11 +33,6 @@ LINUX_DEPENDS="$PROJECT_DIR/$PROJECT/linux/linux.$TARGET_ARCH.conf $ROOT/package
 # If you have ccache installed, take care that LOCAL_CC don't point to it
   LOCAL_CC=`which gcc`
 
-if [ -z "$LOCAL_CC" ] ; then
-  echo "***** Please install gcc *****"
-  exit 127
-fi
-
 # Need to point to your actual g++
 # If you have ccache installed, take care that LOCAL_CXX don't point to it
   LOCAL_CXX=`which g++`
@@ -70,9 +46,7 @@ fi
 # Concurrency make level (-j option)
 #  Try value 1 (default) to 4 on single CPU computer, or more on
 #  multi-processor computer (like hyperthreading SMP CPU)
-  if test -z "${CONCURRENCY_MAKE_LEVEL}"; then
-    CONCURRENCY_MAKE_LEVEL=`cat /proc/cpuinfo | grep -c '^processor[[:cntrl:]]*:'`
-  fi
+  CONCURRENCY_MAKE_LEVEL=`cat /proc/cpuinfo | grep -c '^processor[[:cntrl:]]*:'`
 
 # cache size for ccache
 # Set the maximum size of the files stored in the cache. You can specify a
@@ -81,6 +55,9 @@ fi
 # the nearest multiple of 16 kilobytes.
   CCACHE_CACHE_SIZE="30G"
 
+# forcing install of all packages (yes/no)
+  FORCE_INSTALL="no"
+
 # install devtools on development builds
   if [ "$OPENELEC_VERSION" = "devel" ]; then
     DEVTOOLS=yes
@@ -94,10 +71,5 @@ fi
     . $HOME/.openelec/$PROJECT/options
   fi
 
-# read distro options from $HOME if available
-  if [ -f "$HOME/.openelec/options.$DISTRO" ]; then
-    . $HOME/.openelec/options.$DISTRO
-  fi
-
 . config/graphic
 . config/path $1

config/path

@@ -20,14 +20,6 @@ HOST_NAME=`$LOCAL_CC -dumpmachine`
 TARGET_NAME=$(echo $TARGET_SUBARCH | sed -e "s,-,,")-openelec-linux-gnu${TARGET_ABI}
 
 BUILD=$BUILD_BASE.$DISTRONAME-$PROJECT.$TARGET_ARCH-$OPENELEC_VERSION
-if [ "$OPENELEC_VERSION" = "devel" ] ; then
-  BUILD=$BUILD_BASE.$DISTRONAME-$PROJECT.$TARGET_ARCH-$OS_VERSION-$OPENELEC_VERSION
-fi
-
-if [ -n "$BUILD_SUFFIX" ]; then
-  BUILD=$BUILD-$BUILD_SUFFIX
-fi
-
 TARGET_IMG=$ROOT/$TARGET
 TARGET_ADDONS="$TARGET_IMG/$ADDONS/$ADDON_PATH"
 ADDON_BUILD="$BUILD/$ADDONS/$1"
@@ -72,46 +64,26 @@ SED="sed -i"
   PKG_IS_ADDON="no"
 
   if [ -n "$1" ]; then
-    _PKG_ROOT_NAME=$(echo $1 | cut -d: -f1)
-    _ALL_DIRS=""
-    _FOUND=0
-    PKG_DIR=""
-
-    # first check project folder for a package
-    for DIR in $(find $ROOT/projects/$PROJECT/packages -type d -name $_PKG_ROOT_NAME 2>/dev/null); do
-      if [ -r "$DIR/package.mk" ]; then
-        # found first, set $PKG_DIR
+    FOUND=0
+    for DIR in $ROOT/`find $PACKAGES -type d -name $(echo $1| awk -F : '{print $1}') ! -wholename \*\/source\/\* 2>/dev/null` ; do
+      # keep track of dirs with meta for debugging
+      if [ -z "$ALL_DIRS" ] ; then
+        ALL_DIRS="$DIR"
+      else
+        ALL_DIRS="$ALL_DIRS\\n$DIR"
+      fi
+      if [ -f "$DIR/package.mk" ] ; then
+        FOUND=$((FOUND+1))
+        # found first. set $PKG_DIR
         PKG_DIR="$DIR"
-        # keep track of dirs with package.mk for detecting multiple folders
-        _ALL_DIRS="${_ALL_DIRS}${DIR}\\n"
-        _FOUND=$((_FOUND+1))
-        if [ $_FOUND -gt 1 ]; then
-          # _FOUND more ? fail
+        if [ $FOUND -gt 1 ] ; then
+          # found more ? fail
           echo "Error - multiple package folders:"
-          echo -e "$_ALL_DIRS"
+          echo -e "$ALL_DIRS"
           exit 1
         fi
       fi
     done
-
-    # then check packages folder if not found already
-    if [ $_FOUND -eq 0 ]; then
-      for DIR in $(find $ROOT/$PACKAGES -type d -name $_PKG_ROOT_NAME 2>/dev/null); do
-        if [ -r "$DIR/package.mk" ]; then
-          # found first, set $PKG_DIR
-          PKG_DIR="$DIR"
-          # keep track of dirs with package.mk for detecting multiple folders
-          _ALL_DIRS="${_ALL_DIRS}${DIR}\\n"
-          _FOUND=$((_FOUND+1))
-          if [ $_FOUND -gt 1 ]; then
-            # found more ? fail
-            echo "Error - multiple package folders:"
-            echo -e "$_ALL_DIRS"
-            exit 1
-          fi
-        fi
-      done
-    fi
   fi
 
   if [ -r $PKG_DIR/package.mk ]; then
@@ -131,13 +103,11 @@ XORG_PATH_RGB=/usr/lib/X11/rgb
 XORG_PATH_MODULES=/usr/lib/xorg/modules
 XORG_PATH_DRIVERS=/usr/lib/xorg/modules/drivers
 
-SSL_CERTIFICATES="/etc/ssl"
+SSL_CERTIFICATES="/etc/pki/tls"
 
 TOOLCHAIN_LANGUAGES=c
 [ "$TOOLCHAIN_CXX" = yes ] && TOOLCHAIN_LANGUAGES=${TOOLCHAIN_LANGUAGES},c++
 
-unset TARGET_CPP
-
 TARGET_CC=${TARGET_PREFIX}gcc
 TARGET_CXX=${TARGET_PREFIX}g++
 TARGET_LD=${TARGET_PREFIX}ld
@@ -155,8 +125,6 @@ TARGET_PKG_CONFIG_PATH=""
 TARGET_PKG_CONFIG_LIBDIR="$SYSROOT_PREFIX/usr/lib/pkgconfig:$SYSROOT_PREFIX/usr/share/pkgconfig"
 TARGET_PKG_CONFIG_SYSROOT_DIR="$SYSROOT_PREFIX"
 
-unset HOST_CPP
-
 HOST_AWK=gawk
 HOST_CC=$ROOT/$TOOLCHAIN/bin/host-gcc
 HOST_CXX=$ROOT/$TOOLCHAIN/bin/host-g++

config/release/Autorun.inf

@@ -0,0 +1,2 @@
+[autorun]
+icon=openelec.ico

config/version

@@ -1,9 +1,9 @@
 # VERSION: set full version, use "devel" for development version
-  OPENELEC_VERSION="6.0.1"
+  OPENELEC_VERSION="4.1.6"
 
 # OS_VERSION: OS Version
-  OS_VERSION="6.0"
+  OS_VERSION="4.2"
 
 # ADDON_VERSION: Addon version
-  ADDON_VERSION="6.0"
+  ADDON_VERSION="4.1"
 

distributions/OpenELEC/options

@@ -1,200 +0,0 @@
-# Name of the Distro to build (full name, without special characters)
-  DISTRONAME="OpenELEC"
-
-# short project description
-  DESCRIPTION="OpenELEC is a fast and user-friendly Kodi Entertainment Center distribution."
-
-# Welcome Message for e.g. SSH Server (up to 5 Lines)
-  GREETING0="##############################################"
-  GREETING1="#                  OpenELEC                  #"
-  GREETING2="#             http://openelec.tv             #"
-  GREETING3="##############################################"
-  GREETING4=""
-
-# Root password to integrate in the target system
-  ROOT_PASSWORD="openelec"
-
-# Install glibc locales to the build (yes / no)
-  GLIBC_LOCALES="yes"
-
-# Mediacenter to use (kodi / no)
-  MEDIACENTER="kodi"
-
-# Skins to install (Confluence)
-# Space separated list is supported,
-# e.g. SKINS="Confluence"
-  SKINS="Confluence"
-
-# Default Skin (Confluence)
-  SKIN_DEFAULT="Confluence"
-
-# install extra subtitle Fonts for KODI (yes / no)
-  KODI_EXTRA_FONTS="yes"
-
-# build and install PulseAudio support (yes / no)
-  PULSEAUDIO_SUPPORT="no"
-
-# build and install espeak support (yes / no)
-  ESPEAK_SUPPORT="yes"
-
-# build and install with non-free support
-# (RAR compression support in KODI) (yes / no)
-  KODI_NONFREE_SUPPORT="yes"
-
-# build and install with BluRay support (yes / no)
-  KODI_BLURAY_SUPPORT="yes"
-
-# build and install with BD+ support
-# (BD+ decryption support in KODI) (yes / no)
-  BLURAY_BDPLUS_SUPPORT="yes"
-
-# build and install with AACS support
-# (BD decryption support in KODI) (yes / no)
-  BLURAY_AACS_SUPPORT="yes"
-
-# build and install with DVDCSS support
-# (DVD decryption support in KODI) (yes / no)
-  KODI_DVDCSS_SUPPORT="yes"
-
-# additional drivers to install:
-# for a list of additinoal drivers see packages/linux-drivers
-# Space separated list is supported,
-# e.g. ADDITIONAL_DRIVERS="DRIVER1 DRIVER2"
-  ADDITIONAL_DRIVERS="RTL8192CU RTL8192DU RTL8192EU RTL8188EU RTL8812AU dvbhdhomerun"
-
-# build and install bluetooth support (yes / no)
-  BLUETOOTH_SUPPORT="yes"
-
-# build and install with KODI webfrontend (yes / no)
-  KODI_WEBSERVER_SUPPORT="yes"
-
-# build and install Avahi (Zeroconf) daemon (yes / no)
-  AVAHI_DAEMON="yes"
-
-# build with UPnP support (yes / no)
-  KODI_UPNP_SUPPORT="yes"
-
-# build with MySQL support (yes / no)
-  KODI_MYSQL_SUPPORT="yes"
-
-# build xbmc with sshlib support (yes / no)
-  KODI_SSHLIB_SUPPORT="yes"
-
-# build xbmc with optical drive support (yes / no)
-  KODI_OPTICAL_SUPPORT="yes"
-
-# build with AirPlay support (stream videos from iDevices to KODI) (yes / no)
-  KODI_AIRPLAY_SUPPORT="yes"
-
-# build with AirTunes support (stream music from iDevices to KODI) (yes / no)
-  KODI_AIRTUNES_SUPPORT="yes"
-
-# build with libnfs support (mounting nfs shares with KODI) (yes / no)
-  KODI_NFS_SUPPORT="yes"
-
-# build with Samba Client support (mounting SAMBA shares with KODI) (yes / no)
-  KODI_SAMBA_SUPPORT="yes"
-
-# build with NFS support (mounting nfs shares via the OS) (yes / no)
-  NFS_SUPPORT="yes"
-
-# build with Samba Client support (mounting samba shares via the OS) (yes / no)
-  SAMBA_SUPPORT="yes"
-
-# build and install Samba Server (yes / no)
-  SAMBA_SERVER="yes"
-
-# build and install SFTP Server (yes / no)
-  SFTP_SERVER="yes"
-
-# build and install diskmounter support (udevil)
-# this service provide auto mounting support for external drives in the
-# mediacenter also automount internally drives at boottime via udev (yes / no)
-  UDEVIL="yes"
-
-# build and install exFAT fuse support (yes / no)
-  EXFAT="yes"
-
-# build and install NTFS-3G fuse support (yes / no)
-  NTFS3G="yes"
-
-# build and install hfs filesystem utilities (yes / no)
-  HFSTOOLS="yes"
-
-# Windowmanager to use (ratpoison / fluxbox / none)
-  WINDOWMANAGER="fluxbox"
-
-# Xorg Graphic drivers to use (all / i915,i965,r200,r300,r600,nvidia)
-# Space separated list is supported,
-# e.g. GRAPHIC_DRIVERS="i915 i965 r300 r600 radeonsi nvidia"
-  GRAPHIC_DRIVERS="r300 r600 radeonsi i915 i965 nvidia"
-
-# build and install remote support (yes / no)
-  REMOTE_SUPPORT="yes"
-
-# build and install ATV IR remote support (yes / no)
-  ATVCLIENT_SUPPORT="yes"
-
-# build and install IRServer IR/LCD support (yes / no)
-  IRSERVER_SUPPORT="yes"
-
-# build and install Joystick support (yes / no)
-  JOYSTICK_SUPPORT="yes"
-
-# build and install CEC adapter support (yes / no)
-  CEC_SUPPORT="yes"
-
-# build and install iSCSI support - iscsistart (yes / no)
-  ISCSI_SUPPORT="yes"
-
-# LCD driver to Use - Possible drivers are ( Comma seperated:
-# bayrad,CFontz,CFontz633,CFontzPacket,curses,CwLnx,dm140,
-# ea65,EyeboxOne,g15,glcd,glcdlib,glk,hd44780,i2500vfd,
-# icp_a106,imon,imonlcd,IOWarrior,irman,irtrans,
-# joy,lb216,lcdm001,lcterm,lirc,lis,MD8800,mdm166a,
-# ms6931,mtc_s16209x,MtxOrb,mx5000,NoritakeVFD,
-# picolcd,pyramid,sed1330,sed1520,serialPOS,
-# serialVFD,shuttleVFD,sli,stv5730,SureElec,svga,vlsys_m428
-# 'all' compiles all drivers;
-# 'all,!xxx,!yyy' de-selects previously selected drivers
-# "none" for disable LCD support
-  LCD_DRIVER="irtrans,imon,imonlcd,mdm166a,MtxOrb,lis,dm140,hd44780,CFontz,SureElec,vlsys_m428,serialVFD,shuttleVFD"
-
-# Support for partitioning and formating disks in initramfs (yes / no)
-# This adds support for parted and mkfs.ext3/4 to initramfs for OEM usage
-  INITRAMFS_PARTED_SUPPORT="no"
-
-# build with swap support (yes / no)
-  SWAP_SUPPORT="no"
-
-# swap support enabled per default (yes / no)
-  SWAP_ENABLED_DEFAULT="no"
-
-# swapfile size if SWAP_SUPPORT=yes in MB
-  SWAPFILESIZE="256"
-
-# build with installer (yes / no)
-  INSTALLER_SUPPORT="yes"
-
-# Testpackages for development (yes / no)
-  TESTING="no"
-
-# OEM packages for OEM's (yes / no)
-  OEM_SUPPORT="no"
-
-# build and install nano text editor (yes / no)
-  NANO_EDITOR="yes"
-
-# cron support (yes / no)
-  CRON_SUPPORT="yes"
-
-# Distribution Specific source location
-  DISTRO_MIRROR="http://sources.openelec.tv/mirror"
-  DISTRO_SRC="http://sources.openelec.tv/$OPENELEC_VERSION"
-
-# Addon Server Url
-  ADDON_SERVER_URL="http://addons.openelec.tv"
-
-# set the addon dirs
-  ADDON_PATH="$ADDON_VERSION/$PROJECT/$TARGET_ARCH"
-  ADDON_URL="$ADDON_SERVER_URL/$ADDON_PATH"

packages/3rdparty/lib/cxxtools/package.mk

@@ -17,7 +17,7 @@
 ################################################################################
 
 PKG_NAME="cxxtools"
-PKG_VERSION="2.2.1"
+PKG_VERSION="2.2"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL-2"
@@ -48,7 +48,6 @@ post_makeinstall_host() {
 }
 
 post_makeinstall_target() {
-  $SED "s:\(['= ]\)/usr:\\1$SYSROOT_PREFIX/usr:g" $SYSROOT_PREFIX/usr/bin/cxxtools-config
-
+  rm -rf $SYSROOT_PREFIX/usr/bin/cxxtools-config
   rm -rf $INSTALL/usr/bin
 }

packages/3rdparty/web/tntnet/package.mk

@@ -17,7 +17,7 @@
 ################################################################################
 
 PKG_NAME="tntnet"
-PKG_VERSION="2.2.1"
+PKG_VERSION="2.2"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL-2"
@@ -51,8 +51,6 @@ PKG_CONFIGURE_OPTS_TARGET="--disable-unittest \
                            --with-stressjob=no"
 
 post_makeinstall_target() {
-  $SED "s:\(['= ]\)/usr:\\1$SYSROOT_PREFIX/usr:g" $SYSROOT_PREFIX/usr/bin/tntnet-config
-
   rm -rf $INSTALL/usr/bin
   rm -rf $INSTALL/usr/share
 }

packages/3rdparty/web/tntnet/patches/tntnet-pkgconfig-support.patch

@@ -1,517 +0,0 @@
-diff -Naur tntnet-2.2.1/configure tntnet-2.2.1.patch/configure
---- tntnet-2.2.1/configure	2014-01-17 20:11:49.000000000 +0100
-+++ tntnet-2.2.1.patch/configure	2016-01-07 06:34:42.002634975 +0100
-@@ -16495,7 +16546,7 @@
- ac_config_files="$ac_config_files tntnet-config"
- 
- 
--ac_config_files="$ac_config_files Makefile framework/common/Makefile framework/runtime/Makefile framework/defcomp/Makefile sdk/tools/common/Makefile sdk/tools/ecppc/Makefile sdk/tools/ecppl/Makefile sdk/tools/ecppll/Makefile sdk/demos/Makefile sdk/demos/backgroundjob/Makefile sdk/demos/calc/Makefile sdk/demos/calcajax/Makefile sdk/demos/calcapp/Makefile sdk/demos/calcmvc/Makefile sdk/demos/calci18n/Makefile sdk/demos/chat/Makefile sdk/demos/comp/Makefile sdk/demos/config/Makefile sdk/demos/controls/Makefile sdk/demos/cookie/Makefile sdk/demos/hello/Makefile sdk/demos/savepoint/Makefile sdk/demos/session/Makefile sdk/demos/sprintf/Makefile sdk/demos/strings/Makefile sdk/demos/rajax-jquery/Makefile sdk/demos/upload/Makefile utest/Makefile doc/man/Makefile etc/Makefile"
-+ac_config_files="$ac_config_files Makefile framework/common/Makefile framework/runtime/Makefile framework/defcomp/Makefile pkgconfig/tntnet.pc pkgconfig/tntnet_sdk.pc sdk/tools/common/Makefile sdk/tools/ecppc/Makefile sdk/tools/ecppl/Makefile sdk/tools/ecppll/Makefile sdk/demos/Makefile sdk/demos/backgroundjob/Makefile sdk/demos/calc/Makefile sdk/demos/calcajax/Makefile sdk/demos/calcapp/Makefile sdk/demos/calcmvc/Makefile sdk/demos/calci18n/Makefile sdk/demos/chat/Makefile sdk/demos/comp/Makefile sdk/demos/config/Makefile sdk/demos/controls/Makefile sdk/demos/cookie/Makefile sdk/demos/hello/Makefile sdk/demos/savepoint/Makefile sdk/demos/session/Makefile sdk/demos/sprintf/Makefile sdk/demos/strings/Makefile sdk/demos/rajax-jquery/Makefile sdk/demos/upload/Makefile utest/Makefile doc/man/Makefile etc/Makefile"
- 
- 
- cat >confcache <<\_ACEOF
-@@ -17642,6 +17693,8 @@
-     "framework/common/Makefile") CONFIG_FILES="$CONFIG_FILES framework/common/Makefile" ;;
-     "framework/runtime/Makefile") CONFIG_FILES="$CONFIG_FILES framework/runtime/Makefile" ;;
-     "framework/defcomp/Makefile") CONFIG_FILES="$CONFIG_FILES framework/defcomp/Makefile" ;;
-+    "pkgconfig/tntnet.pc") CONFIG_FILES="$CONFIG_FILES pkgconfig/tntnet.pc" ;;
-+    "pkgconfig/tntnet_sdk.pc") CONFIG_FILES="$CONFIG_FILES pkgconfig/tntnet_sdk.pc" ;;
-     "sdk/tools/common/Makefile") CONFIG_FILES="$CONFIG_FILES sdk/tools/common/Makefile" ;;
-     "sdk/tools/ecppc/Makefile") CONFIG_FILES="$CONFIG_FILES sdk/tools/ecppc/Makefile" ;;
-     "sdk/tools/ecppl/Makefile") CONFIG_FILES="$CONFIG_FILES sdk/tools/ecppl/Makefile" ;;
-diff -Naur tntnet-2.2.1/configure.in tntnet-2.2.1.patch/configure.in
---- tntnet-2.2.1/configure.in	2014-01-17 20:11:40.000000000 +0100
-+++ tntnet-2.2.1.patch/configure.in	2016-01-07 06:08:14.679087771 +0100
-@@ -218,6 +218,8 @@
-     framework/common/Makefile
-     framework/runtime/Makefile
-     framework/defcomp/Makefile
-+    pkgconfig/tntnet.pc
-+    pkgconfig/tntnet_sdk.pc
-     sdk/tools/common/Makefile
-     sdk/tools/ecppc/Makefile
-     sdk/tools/ecppl/Makefile
-diff -Naur tntnet-2.2.1/Makefile.am tntnet-2.2.1.patch/Makefile.am
---- tntnet-2.2.1/Makefile.am	2014-01-17 20:12:20.000000000 +0100
-+++ tntnet-2.2.1.patch/Makefile.am	2016-01-07 06:07:03.793973412 +0100
-@@ -80,3 +80,9 @@
-     Releasenotes-2.2.markdown \
-     Releasenotes-2.2.1.markdown \
-     $(pkgdata_SCRIPTS)
-+
-+pkgconfigdir = $(libdir)/pkgconfig/
-+
-+pkgconfig_DATA = \
-+    pkgconfig/tntnet.pc \
-+    pkgconfig/tntnet_sdk.pc
-diff -Naur tntnet-2.2.1/Makefile.in tntnet-2.2.1.patch/Makefile.in
---- tntnet-2.2.1/Makefile.in	2014-01-17 20:12:26.000000000 +0100
-+++ tntnet-2.2.1.patch/Makefile.in	2016-01-07 06:33:05.045478363 +0100
-@@ -1,7 +1,7 @@
--# Makefile.in generated by automake 1.12.2 from Makefile.am.
-+# Makefile.in generated by automake 1.13.4 from Makefile.am.
- # @configure_input@
- 
--# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-+# Copyright (C) 1994-2013 Free Software Foundation, Inc.
- 
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
-@@ -14,24 +14,53 @@
- 
- @SET_MAKE@
- 
-+
- VPATH = @srcdir@
--am__make_dryrun = \
--  { \
--    am__dry=no; \
-+am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
-+am__make_running_with_option = \
-+  case $${target_option-} in \
-+      ?) ;; \
-+      *) echo "am__make_running_with_option: internal error: invalid" \
-+              "target option '$${target_option-}' specified" >&2; \
-+         exit 1;; \
-+  esac; \
-+  has_opt=no; \
-+  sane_makeflags=$$MAKEFLAGS; \
-+  if $(am__is_gnu_make); then \
-+    sane_makeflags=$$MFLAGS; \
-+  else \
-     case $$MAKEFLAGS in \
-       *\\[\ \	]*) \
--        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
--          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
--      *) \
--        for am__flg in $$MAKEFLAGS; do \
--          case $$am__flg in \
--            *=*|--*) ;; \
--            *n*) am__dry=yes; break;; \
--          esac; \
--        done;; \
-+        bs=\\; \
-+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-     esac; \
--    test $$am__dry = yes; \
--  }
-+  fi; \
-+  skip_next=no; \
-+  strip_trailopt () \
-+  { \
-+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
-+  }; \
-+  for flg in $$sane_makeflags; do \
-+    test $$skip_next = yes && { skip_next=no; continue; }; \
-+    case $$flg in \
-+      *=*|--*) continue;; \
-+        -*I) strip_trailopt 'I'; skip_next=yes;; \
-+      -*I?*) strip_trailopt 'I';; \
-+        -*O) strip_trailopt 'O'; skip_next=yes;; \
-+      -*O?*) strip_trailopt 'O';; \
-+        -*l) strip_trailopt 'l'; skip_next=yes;; \
-+      -*l?*) strip_trailopt 'l';; \
-+      -[dEDm]) skip_next=yes;; \
-+      -[JT]) skip_next=yes;; \
-+    esac; \
-+    case $$flg in \
-+      *$$target_option*) has_opt=yes; break;; \
-+    esac; \
-+  done; \
-+  test $$has_opt = yes
-+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
-+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
- pkgdatadir = $(datadir)/@PACKAGE@
- pkgincludedir = $(includedir)/@PACKAGE@
- pkglibdir = $(libdir)/@PACKAGE@
-@@ -52,11 +81,13 @@
- host_triplet = @host@
- target_triplet = @target@
- subdir = .
--DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
--	$(srcdir)/Makefile.in $(srcdir)/tntnet-config.in \
--	$(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \
--	TODO config.guess config.sub depcomp install-sh ltmain.sh \
--	missing
-+DIST_COMMON = INSTALL NEWS README AUTHORS ChangeLog \
-+	$(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-+	$(top_srcdir)/configure $(am__configure_deps) \
-+	$(srcdir)/tntnet-config.in \
-+	$(top_srcdir)/pkgconfig/tntnet.pc.in \
-+	$(top_srcdir)/pkgconfig/tntnet_sdk.pc.in COPYING TODO \
-+	config.guess config.sub depcomp install-sh missing ltmain.sh
- ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
- am__aclocal_m4_deps = $(top_srcdir)/m4/acx_pthread.m4 \
- 	$(top_srcdir)/m4/ax_check_compile_flag.m4 \
-@@ -71,7 +102,8 @@
-  configure.lineno config.status.lineno
- mkinstalldirs = $(install_sh) -d
- CONFIG_HEADER = $(top_builddir)/framework/common/config.h
--CONFIG_CLEAN_FILES = tntnet-config
-+CONFIG_CLEAN_FILES = tntnet-config pkgconfig/tntnet.pc \
-+	pkgconfig/tntnet_sdk.pc
- CONFIG_CLEAN_VPATH_FILES =
- am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
- am__vpath_adj = case $$p in \
-@@ -100,27 +132,62 @@
-     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-          $(am__cd) "$$dir" && rm -f $$files; }; \
-   }
--am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgdatadir)"
-+am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgdatadir)" \
-+	"$(DESTDIR)$(pkgconfigdir)"
- SCRIPTS = $(bin_SCRIPTS) $(pkgdata_SCRIPTS)
-+AM_V_P = $(am__v_P_@AM_V@)
-+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
-+am__v_P_0 = false
-+am__v_P_1 = :
-+AM_V_GEN = $(am__v_GEN_@AM_V@)
-+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
-+am__v_GEN_0 = @echo "  GEN     " $@;
-+am__v_GEN_1 = 
-+AM_V_at = $(am__v_at_@AM_V@)
-+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
-+am__v_at_0 = @
-+am__v_at_1 = 
- SOURCES =
- DIST_SOURCES =
--RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
--	html-recursive info-recursive install-data-recursive \
--	install-dvi-recursive install-exec-recursive \
--	install-html-recursive install-info-recursive \
--	install-pdf-recursive install-ps-recursive install-recursive \
--	installcheck-recursive installdirs-recursive pdf-recursive \
--	ps-recursive uninstall-recursive
-+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
-+	ctags-recursive dvi-recursive html-recursive info-recursive \
-+	install-data-recursive install-dvi-recursive \
-+	install-exec-recursive install-html-recursive \
-+	install-info-recursive install-pdf-recursive \
-+	install-ps-recursive install-recursive installcheck-recursive \
-+	installdirs-recursive pdf-recursive ps-recursive \
-+	tags-recursive uninstall-recursive
- am__can_run_installinfo = \
-   case $$AM_UPDATE_INFO_DIR in \
-     n|no|NO) false;; \
-     *) (install-info --version) >/dev/null 2>&1;; \
-   esac
-+DATA = $(pkgconfig_DATA)
- RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-   distclean-recursive maintainer-clean-recursive
--AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
--	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-+am__recursive_targets = \
-+  $(RECURSIVE_TARGETS) \
-+  $(RECURSIVE_CLEAN_TARGETS) \
-+  $(am__extra_recursive_targets)
-+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
- 	cscope distdir dist dist-all distcheck
-+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
-+# Read a list of newline-separated strings from the standard input,
-+# and print each of them once, without duplicates.  Input order is
-+# *not* preserved.
-+am__uniquify_input = $(AWK) '\
-+  BEGIN { nonempty = 0; } \
-+  { items[$$0] = 1; nonempty = 1; } \
-+  END { if (nonempty) { for (i in items) print i; }; } \
-+'
-+# Make sure the list of sources is unique.  This is necessary because,
-+# e.g., the same source file might be shared among _SOURCES variables
-+# for different programs/libraries.
-+am__define_uniq_tagged_files = \
-+  list='$(am__tagged_files)'; \
-+  unique=`for i in $$list; do \
-+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-+  done | $(am__uniquify_input)`
- ETAGS = etags
- CTAGS = ctags
- CSCOPE = cscope
-@@ -179,6 +246,7 @@
- ACLOCAL = @ACLOCAL@
- AMTAR = @AMTAR@
- AM_CFLAGS = @AM_CFLAGS@
-+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
- AR = @AR@
- AUTOCONF = @AUTOCONF@
- AUTOHEADER = @AUTOHEADER@
-@@ -382,6 +450,11 @@
-     Releasenotes-2.2.1.markdown \
-     $(pkgdata_SCRIPTS)
- 
-+pkgconfigdir = $(libdir)/pkgconfig/
-+pkgconfig_DATA = \
-+    pkgconfig/tntnet.pc \
-+    pkgconfig/tntnet_sdk.pc
-+
- all: all-recursive
- 
- .SUFFIXES:
-@@ -421,6 +494,10 @@
- $(am__aclocal_m4_deps):
- tntnet-config: $(top_builddir)/config.status $(srcdir)/tntnet-config.in
- 	cd $(top_builddir) && $(SHELL) ./config.status $@
-+pkgconfig/tntnet.pc: $(top_builddir)/config.status $(top_srcdir)/pkgconfig/tntnet.pc.in
-+	cd $(top_builddir) && $(SHELL) ./config.status $@
-+pkgconfig/tntnet_sdk.pc: $(top_builddir)/config.status $(top_srcdir)/pkgconfig/tntnet_sdk.pc.in
-+	cd $(top_builddir) && $(SHELL) ./config.status $@
- install-binSCRIPTS: $(bin_SCRIPTS)
- 	@$(NORMAL_INSTALL)
- 	@list='$(bin_SCRIPTS)'; test -n "$(bindir)" || list=; \
-@@ -500,6 +577,27 @@
- 
- distclean-libtool:
- 	-rm -f libtool config.lt
-+install-pkgconfigDATA: $(pkgconfig_DATA)
-+	@$(NORMAL_INSTALL)
-+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-+	if test -n "$$list"; then \
-+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
-+	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
-+	fi; \
-+	for p in $$list; do \
-+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-+	  echo "$$d$$p"; \
-+	done | $(am__base_list) | \
-+	while read files; do \
-+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
-+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
-+	done
-+
-+uninstall-pkgconfigDATA:
-+	@$(NORMAL_UNINSTALL)
-+	@list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
-+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-+	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
- 
- # This directory's subdirectories are mostly independent; you can cd
- # into them and run 'make' without going through this Makefile.
-@@ -507,14 +605,13 @@
- # (1) if the variable is set in 'config.status', edit 'config.status'
- #     (which will cause the Makefiles to be regenerated when you run 'make');
- # (2) otherwise, pass the desired values on the 'make' command line.
--$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
--	@fail= failcom='exit 1'; \
--	for f in x $$MAKEFLAGS; do \
--	  case $$f in \
--	    *=* | --[!k]*);; \
--	    *k*) failcom='fail=yes';; \
--	  esac; \
--	done; \
-+$(am__recursive_targets):
-+	@fail=; \
-+	if $(am__make_keepgoing); then \
-+	  failcom='fail=yes'; \
-+	else \
-+	  failcom='exit 1'; \
-+	fi; \
- 	dot_seen=no; \
- 	target=`echo $@ | sed s/-recursive//`; \
- 	case "$@" in \
-@@ -535,31 +632,13 @@
- 	if test "$$dot_seen" = "no"; then \
- 	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
- 	fi; test -z "$$fail"
--tags-recursive:
--	list='$(SUBDIRS)'; for subdir in $$list; do \
--	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
--	done
--ctags-recursive:
--	list='$(SUBDIRS)'; for subdir in $$list; do \
--	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
--	done
--cscopelist-recursive:
--	list='$(SUBDIRS)'; for subdir in $$list; do \
--	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
--	done
- 
--ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
--	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
--	unique=`for i in $$list; do \
--	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
--	  done | \
--	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
--	      END { if (nonempty) { for (i in files) print i; }; }'`; \
--	mkid -fID $$unique
--tags: TAGS
-+ID: $(am__tagged_files)
-+	$(am__define_uniq_tagged_files); mkid -fID $$unique
-+tags: tags-recursive
-+TAGS: tags
- 
--TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
--		$(TAGS_FILES) $(LISP)
-+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
- 	set x; \
- 	here=`pwd`; \
- 	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-@@ -575,12 +654,7 @@
- 	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
- 	  fi; \
- 	done; \
--	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
--	unique=`for i in $$list; do \
--	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
--	  done | \
--	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
--	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-+	$(am__define_uniq_tagged_files); \
- 	shift; \
- 	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
- 	  test -n "$$unique" || unique=$$empty_fix; \
-@@ -592,15 +666,11 @@
- 	      $$unique; \
- 	  fi; \
- 	fi
--ctags: CTAGS
--CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
--		$(TAGS_FILES) $(LISP)
--	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
--	unique=`for i in $$list; do \
--	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
--	  done | \
--	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
--	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-+ctags: ctags-recursive
-+
-+CTAGS: ctags
-+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
-+	$(am__define_uniq_tagged_files); \
- 	test -z "$(CTAGS_ARGS)$$unique" \
- 	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
- 	     $$unique
-@@ -609,18 +679,16 @@
- 	here=`$(am__cd) $(top_builddir) && pwd` \
- 	  && $(am__cd) $(top_srcdir) \
- 	  && gtags -i $(GTAGS_ARGS) "$$here"
--
- cscope: cscope.files
- 	test ! -s cscope.files \
- 	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
--
- clean-cscope:
- 	-rm -f cscope.files
-+cscope.files: clean-cscope cscopelist
-+cscopelist: cscopelist-recursive
- 
--cscope.files: clean-cscope cscopelist-recursive cscopelist
--
--cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
--	list='$(SOURCES) $(HEADERS) $(LISP)'; \
-+cscopelist-am: $(am__tagged_files)
-+	list='$(am__tagged_files)'; \
- 	case "$(srcdir)" in \
- 	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
- 	  *) sdir=$(subdir)/$(srcdir) ;; \
-@@ -754,9 +822,9 @@
- 	*.zip*) \
- 	  unzip $(distdir).zip ;;\
- 	esac
--	chmod -R a-w $(distdir); chmod u+w $(distdir)
--	mkdir $(distdir)/_build
--	mkdir $(distdir)/_inst
-+	chmod -R a-w $(distdir)
-+	chmod u+w $(distdir)
-+	mkdir $(distdir)/_build $(distdir)/_inst
- 	chmod a-w $(distdir)
- 	test -d $(distdir)/_build || exit 0; \
- 	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-@@ -820,10 +888,10 @@
- 	       exit 1; } >&2
- check-am: all-am
- check: check-recursive
--all-am: Makefile $(SCRIPTS)
-+all-am: Makefile $(SCRIPTS) $(DATA)
- installdirs: installdirs-recursive
- installdirs-am:
--	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgdatadir)"; do \
-+	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(pkgconfigdir)"; do \
- 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
- 	done
- install: install-recursive
-@@ -878,7 +946,7 @@
- 
- info-am:
- 
--install-data-am: install-pkgdataSCRIPTS
-+install-data-am: install-pkgconfigDATA install-pkgdataSCRIPTS
- 
- install-dvi: install-dvi-recursive
- 
-@@ -924,30 +992,29 @@
- 
- ps-am:
- 
--uninstall-am: uninstall-binSCRIPTS uninstall-pkgdataSCRIPTS
-+uninstall-am: uninstall-binSCRIPTS uninstall-pkgconfigDATA \
-+	uninstall-pkgdataSCRIPTS
-+
-+.MAKE: $(am__recursive_targets) install-am install-strip
- 
--.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) \
--	cscopelist-recursive ctags-recursive install-am install-strip \
--	tags-recursive
--
--.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
--	all all-am am--refresh check check-am clean clean-cscope \
--	clean-generic clean-libtool cscope cscopelist \
--	cscopelist-recursive ctags ctags-recursive dist dist-all \
--	dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ dist-xz \
--	dist-zip distcheck distclean distclean-generic \
-+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
-+	am--refresh check check-am clean clean-cscope clean-generic \
-+	clean-libtool cscope cscopelist-am ctags ctags-am dist \
-+	dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
-+	dist-xz dist-zip distcheck distclean distclean-generic \
- 	distclean-libtool distclean-tags distcleancheck distdir \
- 	distuninstallcheck dvi dvi-am html html-am info info-am \
- 	install install-am install-binSCRIPTS install-data \
- 	install-data-am install-dvi install-dvi-am install-exec \
- 	install-exec-am install-html install-html-am install-info \
- 	install-info-am install-man install-pdf install-pdf-am \
--	install-pkgdataSCRIPTS install-ps install-ps-am install-strip \
--	installcheck installcheck-am installdirs installdirs-am \
--	maintainer-clean maintainer-clean-generic mostlyclean \
--	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
--	tags tags-recursive uninstall uninstall-am \
--	uninstall-binSCRIPTS uninstall-pkgdataSCRIPTS
-+	install-pkgconfigDATA install-pkgdataSCRIPTS install-ps \
-+	install-ps-am install-strip installcheck installcheck-am \
-+	installdirs installdirs-am maintainer-clean \
-+	maintainer-clean-generic mostlyclean mostlyclean-generic \
-+	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
-+	uninstall-am uninstall-binSCRIPTS uninstall-pkgconfigDATA \
-+	uninstall-pkgdataSCRIPTS
- 
- 
- tntnet-config: tntnet-config.in
-diff -Naur tntnet-2.2.1/pkgconfig/tntnet.pc.in tntnet-2.2.1.patch/pkgconfig/tntnet.pc.in
---- tntnet-2.2.1/pkgconfig/tntnet.pc.in	1970-01-01 01:00:00.000000000 +0100
-+++ tntnet-2.2.1.patch/pkgconfig/tntnet.pc.in	2016-01-07 06:07:03.794973414 +0100
-@@ -0,0 +1,11 @@
-+prefix=@prefix@
-+exec_prefix=@exec_prefix@
-+libdir=@libdir@
-+includedir=@includedir@
-+
-+Name: tntnet
-+Description: Modular, multithreaded web application library for C++
-+Version: @PACKAGE_VERSION@
-+Libs: -L${libdir} -ltntnet
-+Cflags: -I${includedir}
-+Requires.private: cxxtools
-diff -Naur tntnet-2.2.1/pkgconfig/tntnet_sdk.pc.in tntnet-2.2.1.patch/pkgconfig/tntnet_sdk.pc.in
---- tntnet-2.2.1/pkgconfig/tntnet_sdk.pc.in	1970-01-01 01:00:00.000000000 +0100
-+++ tntnet-2.2.1.patch/pkgconfig/tntnet_sdk.pc.in	2016-01-07 06:07:03.795973416 +0100
-@@ -0,0 +1,11 @@
-+prefix=@prefix@
-+exec_prefix=@exec_prefix@
-+libdir=@libdir@
-+includedir=@includedir@
-+
-+Name: tntnet_sdk
-+Description: Helper library for ecpp-parsing programs
-+Version: @PACKAGE_VERSION@
-+Libs: -L${libdir} -ltntnet_sdk
-+Cflags: -I${includedir}
-+Requires.private: cxxtools

packages/addons/driver/hdhomerun/changelog.txt

@@ -1,11 +1,3 @@
-6.0.0
-  rebuild for OpenELEC-6.0
-4.3.2
-  allow running scripts from addon settings
-4.3.1
-  rebuild for addon api bump
-4.3.0
-  rebuild for addon api bump
 4.1.2
   clean up
 4.1.0

packages/addons/driver/hdhomerun/package.mk

@@ -17,8 +17,8 @@
 ################################################################################
 
 PKG_NAME="hdhomerun"
-PKG_VERSION="6.0"
-PKG_REV="0"
+PKG_VERSION="4.1"
+PKG_REV="2"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://www.silicondust.com/products/hdhomerun/dvbt/"
@@ -31,8 +31,6 @@ PKG_LONGDESC="A linux DVB driver for the HDHomeRun (http://www.silicondust.com).
 PKG_AUTORECONF="no"
 PKG_IS_ADDON="yes"
 PKG_ADDON_TYPE="xbmc.python.script"
-PKG_ADDON_PROVIDES=""
-PKG_ADDON_REPOVERSION="6.0"
 
 make_target() {
   : # nothing to do here

packages/addons/driver/hdhomerun/source/bin/userspace-driver.sh

@@ -32,8 +32,8 @@ unlock() { flock -u $HDHR_LOCKFD; flock -xn $HDHR_LOCKFD && rm -f "$HDHR_LOCKFIL
 # exclusive lock
 exlock
 
-HDHR_ADDON_DIR="$HOME/.kodi/addons/driver.dvb.hdhomerun"
-HDHR_ADDON_HOME="$HOME/.kodi/userdata/addon_data/driver.dvb.hdhomerun"
+HDHR_ADDON_DIR="$HOME/.xbmc/addons/driver.dvb.hdhomerun"
+HDHR_ADDON_HOME="$HOME/.xbmc/userdata/addon_data/driver.dvb.hdhomerun"
 HDHR_ADDON_SETTINGS="$HDHR_ADDON_HOME/settings.xml"
 
 # modules are not automatically loaded

packages/addons/driver/hdhomerun/source/default.py

@@ -1,6 +1,6 @@
 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#      Copyright (C) 2009-2013 Stephan Raue (stephan@openelec.tv)
 #
 #  OpenELEC is free software: you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
@@ -15,3 +15,18 @@
 #  You should have received a copy of the GNU General Public License
 #  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
 ################################################################################
+
+import os
+import sys
+import xbmcaddon
+
+__settings__      = xbmcaddon.Addon(id = 'driver.dvb.hdhomerun')
+__cwd__           = __settings__.getAddonInfo('path')
+__resources_lib__ = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'lib'))
+__settings_xml__  = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'settings.xml'))
+
+if __name__ == "__main__" and len(sys.argv) == 2 and sys.argv[1] == 'refresh_tuners':
+  sys.path.append(__resources_lib__)
+  from functions import refresh_hdhomerun_tuners
+  refresh_hdhomerun_tuners(__settings_xml__)
+  __settings__.openSettings()

packages/addons/driver/hdhomerun/source/resources/lib/functions.py

@@ -24,7 +24,7 @@ import shutil
 import xmlpp
 from xml.dom import minidom
 
-__sundtek_userspace__ = '/storage/.kodi/userdata/addon_data/driver.dvb.sundtek-mediatv/'
+__sundtek_userspace__ = '/storage/.xbmc/userdata/addon_data/driver.dvb.sundtek-mediatv/'
 
 ######################################################################################################
 # backup setting.xml file only if backup doesn't exist

packages/addons/driver/hdhomerun/source/resources/lib/xmlpp.py

@@ -37,39 +37,36 @@ def _usage(this_file):
     return """SYNOPSIS: pretty print an XML document
 USAGE: python %s <filename> \n""" % this_file
 
-def _pprint_line(indent_level, line, width=100, output=_sys.stdout, ignore_contents = False):
+def _pprint_line(indent_level, line, width=100, output=_sys.stdout):
     if line.strip():
         start = ""
         number_chars = 0
         for l in range(indent_level):
             start = start + " "
             number_chars = number_chars + 1
-        if not ignore_contents:
-            try:
-                elem_start = _re.findall("(\<\W{0,1}\w+:\w+) ?", line)[0]
-                elem_finished = _re.findall("([?|\]\]/|\-\-]*\>)", line)[0] 
-                #should not have *
-                attrs = _re.findall("(\S*?\=\".*?\")", line)
-                output.write(start + elem_start)
-                number_chars = len(start + elem_start)
-                for attr in attrs:
-                    if (attrs.index(attr) + 1) == len(attrs):
-                        number_chars = number_chars + len(elem_finished)
-                    if (number_chars + len(attr) + 1) > width:
-                        output.write("\n")
-                        for i in range(len(start + elem_start) + 1):
-                            output.write(" ")
-                        number_chars = len(start + elem_start) + 1 
-                    else:
+        try:
+            elem_start = _re.findall("(\<\W{0,1}\w+:\w+) ?", line)[0]
+            elem_finished = _re.findall("([?|\]\]/]*\>)", line)[0] 
+            #should not have *
+            attrs = _re.findall("(\S*?\=\".*?\")", line)
+            output.write(start + elem_start)
+            number_chars = len(start + elem_start)
+            for attr in attrs:
+                if (attrs.index(attr) + 1) == len(attrs):
+                    number_chars = number_chars + len(elem_finished)
+                if (number_chars + len(attr) + 1) > width:
+                    output.write("\n")
+                    for i in range(len(start + elem_start) + 1):
                         output.write(" ")
-                        number_chars = number_chars + 1
-                    output.write(attr)
-                    number_chars = number_chars + len(attr)
-                output.write(elem_finished + "\n")
-            except IndexError:
-                #give up pretty print this line
-                output.write(start + line + "\n")
-        else:
+                    number_chars = len(start + elem_start) + 1 
+                else:
+                    output.write(" ")
+                    number_chars = number_chars + 1
+                output.write(attr)
+                number_chars = number_chars + len(attr)
+            output.write(elem_finished + "\n")
+        except IndexError:
+            #give up pretty print this line
             output.write(start + line + "\n")
                 
 
@@ -83,8 +80,7 @@ def _get_next_elem(data):
     start_pos = data.find("<")
     end_pos = data.find(">") + 1
     retval = data[start_pos:end_pos]
-    stopper = retval.rfind("/")
-    ignore_contents = False
+    stopper = retval.rfind("/") 
     if stopper < retval.rfind("\""):
         stopper = -1
     single = (stopper > -1 and ((retval.find(">") - stopper) < (stopper - retval.find("<"))))
@@ -93,19 +89,11 @@ def _get_next_elem(data):
     ignore_question =  retval.find("<?") > -1
 
     if ignore_excl:
-        ignore_contents = True
         cdata = retval.find("<![CDATA[") > -1
         if cdata:
             end_pos = data.find("]]>")
             if end_pos > -1:
                 end_pos = end_pos + len("]]>")
-                stopper = end_pos
-        else:
-            end_pos = data.find("-->")
-            if end_pos > -1:
-                end_pos = end_pos + len("-->")
-                stopper = end_pos
-        retval = data[start_pos:end_pos]
 
     elif ignore_question:
         end_pos = data.find("?>") + len("?>")
@@ -113,12 +101,11 @@ def _get_next_elem(data):
     
     no_indent = ignore or single
 
-    
+    #print retval, end_pos, start_pos, stopper > -1, no_indent
     return start_pos, \
            end_pos, \
            stopper > -1, \
-           no_indent, \
-           ignore_contents
+           no_indent
 
 def get_pprint(xml, indent=4, width=80):
     """Returns the pretty printed xml """
@@ -129,8 +116,6 @@ def get_pprint(xml, indent=4, width=80):
             self.output += string
     out = out()
     pprint(xml, output=out, indent=indent, width=width)
-    
-
 
     return out.output
 
@@ -141,7 +126,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
     Use indent to select indentation level. Default is 4   """
     data = xml
     indent_level = 0
-    start_pos, end_pos, is_stop, no_indent, ignore_contents  = _get_next_elem(data)
+    start_pos, end_pos, is_stop, no_indent  = _get_next_elem(data)
     while ((start_pos > -1 and end_pos > -1)):
         _pprint_elem_content(indent_level, data[:start_pos].strip(), 
                              output=output)
@@ -151,8 +136,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
         _pprint_line(indent_level, 
                      data[:end_pos - start_pos], 
                      width=width,
-                     output=output,
-                     ignore_contents=ignore_contents)
+                     output=output)
         data = data[end_pos - start_pos:]
         if not is_stop and not no_indent :
             indent_level = indent_level + indent
@@ -160,7 +144,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
         if not data:
             break
         else:
-            start_pos, end_pos, is_stop, no_indent, ignore_contents  = _get_next_elem(data)
+            start_pos, end_pos, is_stop, no_indent  = _get_next_elem(data)
     
 
 if __name__ == "__main__":

packages/addons/driver/hdhomerun/source/resources/settings.xml

@@ -11,6 +11,6 @@
   <category label="9000">
     <setting type="sep" />
     <setting id="ENABLE_TUNER_TYPES" type="bool" label="9005" default="true" />
-    <setting label="9010" option="close" type="action" id="refresh_tuners" action="RunScript($CWD/resources/actions.py, refresh_tuners)" />
+    <setting label="9010" option="close" type="action" action="RunScript($ID, refresh_tuners)" />
   </category>
 </settings>

packages/addons/driver/imon-mce/changelog.txt

@@ -1,24 +1,11 @@
-6.0.0
-  rebuild for OpenELEC-6.0
-
-4.3.1
- fix keymaps path
-
-4.3.0
- rebuild for addon api bump
-
 4.1.0
  rebuild for addon api bump
-
 4.0.1
  rebuild
-
 4.0.0
   rebuild for OpenELEC-4.0
-
 3.1.1
   rebuild for OpenELEC-3.2
-
 3.0.1
 - bump addon version
 

packages/addons/driver/imon-mce/package.mk

@@ -17,7 +17,7 @@
 ################################################################################
 
 PKG_NAME="imon-mce"
-PKG_VERSION="6.0"
+PKG_VERSION="4.1"
 PKG_REV="0"
 PKG_ARCH="any"
 PKG_LICENSE="OSS"
@@ -31,8 +31,6 @@ PKG_LONGDESC="imon-mce is a driver to add support for MCE remotes to the imon dr
 
 PKG_IS_ADDON="yes"
 PKG_ADDON_TYPE="xbmc.service"
-PKG_ADDON_PROVIDES=""
-PKG_ADDON_REPOVERSION="6.0"
 
 PKG_AUTORECONF="no"
 

packages/addons/driver/imon-mce/source/bin/imon-mce.service

@@ -21,4 +21,4 @@
 . /etc/profile
 
 sleep 1 && \
-ir-keytable -p rc6 -w /usr/lib/udev/rc_keymaps/imon_mce &
+ir-keytable -p rc6 -w /etc/rc_keymaps/imon_mce &

packages/addons/driver/sundtek-mediatv/changelog.txt

@@ -1,19 +1,3 @@
-6.0.1
-  update driver for new devices support
-6.0.0
-  rebuild for OpenELEC-6.0
-4.3.4
-  fixed xbmc/kodi rebranding error
-  some fixes
-4.3.3
-  addon transformed to service addon
-  new addon settings option to enable to check for new driver at boot
-4.3.2
-  new addon settings option to enable to update driver from web with latest version
-4.3.1
-  update driver
-4.3.0
-  rebuild for addon api bump
 4.1.5
   dont touch /storage/.profile
 4.1.4

packages/addons/driver/sundtek-mediatv/package.mk

@@ -17,28 +17,29 @@
 ################################################################################
 
 PKG_NAME="sundtek-mediatv"
-PKG_VERSION="6.0"
-PKG_REV="1"
+PKG_VERSION="4.1"
+PKG_REV="5"
 PKG_ARCH="any"
 PKG_LICENSE="nonfree"
 PKG_SITE="http://support.sundtek.com/"
 PKG_URL=""
-PKG_DEPENDS_TARGET=""
+PKG_DEPENDS_TARGET="toolchain"
 PKG_PRIORITY="optional"
 PKG_SECTION="driver/dvb"
 PKG_SHORTDESC="Sundtek USB Stick DVB userspace driver"
 PKG_LONGDESC="Driver for Sundtek MediaTV Pro (DVB-C, DVB-T, AnalogTV, Composite, S-Video, FM-Radio USB Stick) and Sundtek SkyTV Ultimate (DVB-S/S2 USB)."
 PKG_IS_ADDON="yes"
-PKG_ADDON_TYPE="xbmc.service"
-PKG_ADDON_PROVIDES=""
+PKG_ADDON_TYPE="xbmc.python.script"
 PKG_AUTORECONF="no"
-PKG_ADDON_REPOVERSION="6.0"
 
 make_target() {
   mkdir -p $ROOT/$PKG_BUILD
   cd $ROOT/$PKG_BUILD
 
   case $TARGET_ARCH in
+    i386)
+      INSTALLER_URL="http://sundtek.de/media/netinst/32bit/installer.tar.gz"
+      ;;
     x86_64)
       INSTALLER_URL="http://sundtek.de/media/netinst/64bit/installer.tar.gz"
       ;;
@@ -46,18 +47,11 @@ make_target() {
       INSTALLER_URL="http://sundtek.de/media/netinst/armsysvhf/installer.tar.gz"
       ;;
   esac
-  
   wget -O installer.tar.gz $INSTALLER_URL
-  
   tar -xzf installer.tar.gz
-  
-  chmod -R 755 opt/ etc/
-  
-  rm -f  opt/bin/getinput.sh
-  rm -f  opt/bin/lirc.sh
-  rm -fr opt/lib/pm/
-
-  wget -O version.used http://sundtek.de/media/latest.phtml
+  # we run this via wrapper
+  mv opt/bin/mediaclient opt/bin/mediaclient.bin
+  chmod 755 opt/bin/*
 }
 
 makeinstall_target() {
@@ -70,5 +64,4 @@ addon() {
   cp -P $PKG_DIR/settings-default.xml $ADDON_BUILD/$PKG_ADDON_ID/
   cp -Pa $PKG_BUILD/opt/bin $ADDON_BUILD/$PKG_ADDON_ID/
   cp -Pa $PKG_BUILD/opt/lib $ADDON_BUILD/$PKG_ADDON_ID/
-  cp $PKG_BUILD/version.used $ADDON_BUILD/$PKG_ADDON_ID/
 }

packages/addons/driver/sundtek-mediatv/settings-default.xml

@@ -17,5 +17,4 @@
   <setting id="DEVICE4_NUM" value="1" />
   <setting id="DEVICE5_IP"  value="" />
   <setting id="DEVICE5_NUM" value="1" />
-  <setting id="CHECK_BOOT" value="false" />
 </settings>

packages/addons/driver/sundtek-mediatv/source/bin/mediaclient

@@ -0,0 +1,2 @@
+#!/bin/sh
+LD_PRELOAD=/storage/.xbmc/addons/driver.dvb.sundtek-mediatv/lib/libmediaclient.so exec mediaclient.bin "$@"

packages/addons/driver/sundtek-mediatv/source/bin/sundtek-mediatv.start

@@ -1,247 +0,0 @@
-#!/bin/sh
-
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
-#
-#  OpenELEC is free software: you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation, either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  OpenELEC is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
-################################################################################
-
-. /etc/profile
-
-net_tuner_num_fix() {
-  local num=$1
-
-  [ -z "$num" ] && num=1
-  num=$(( $num *1 ))
-  [ $num -lt 1 ] && num=1
-  num=$(( $num -1 ))
-  echo $num
-}
-
-SUNDTEK_ADDON_DIR="$HOME/.kodi/addons/driver.dvb.sundtek-mediatv"
-SUNDTEK_ADDON_HOME="$HOME/.kodi/userdata/addon_data/driver.dvb.sundtek-mediatv"
-SUNDTEK_ADDON_SETTINGS="$SUNDTEK_ADDON_HOME/settings.xml"
-
-mkdir -p $SUNDTEK_ADDON_HOME
-
-if [ ! -f "$SUNDTEK_ADDON_HOME/sundtek.conf" ]; then
-  cp $SUNDTEK_ADDON_DIR/config/* $SUNDTEK_ADDON_HOME/
-else
-  # in case of missing entries in addon home's sundtek.conf
-  entry_set="$(grep use_hwpidfilter $SUNDTEK_ADDON_HOME/sundtek.conf 2>/dev/null)"
-  if [ -z "$entry_set" ]; then
-    sed -i 's|^device_attach=.*|# device_attach not used anymore\n\n# enable HW PID filter\nuse_hwpidfilter=off\n\n# enable listening on network\nenablenetwork=off|g' $SUNDTEK_ADDON_HOME/sundtek.conf
-    sed -i 's|^#first_adapter=.*|first_adapter=0|g' $SUNDTEK_ADDON_HOME/sundtek.conf
-
-    sed -i 's|.*network tuner IP address (OpenELEC specific).*||g' $SUNDTEK_ADDON_HOME/sundtek.conf
-    sed -i 's|.*network_tuner_ip=.*||g' $SUNDTEK_ADDON_HOME/sundtek.conf
-  fi
-fi
-
-if [ ! -f "$SUNDTEK_ADDON_SETTINGS" ]; then
-  cp $SUNDTEK_ADDON_DIR/settings-default.xml $SUNDTEK_ADDON_SETTINGS
-fi
-
-[ ! -f $SUNDTEK_ADDON_HOME/rc_key_enter.map ] && mv $SUNDTEK_ADDON_HOME/rc_key_enter $SUNDTEK_ADDON_HOME/rc_key_enter.map
-[ ! -f $SUNDTEK_ADDON_HOME/rc_key_ok.map ] && mv $SUNDTEK_ADDON_HOME/rc_key_ok $SUNDTEK_ADDON_HOME/rc_key_ok.map
-
-mkdir -p /var/config
-cat "$SUNDTEK_ADDON_SETTINGS" | awk -F\" '{print $2"=\""$4"\""}' | sed '/^=/d' > /var/config/sundtek-addon.conf
-. /var/config/sundtek-addon.conf
-
-# check if there is new driver on web
-if [ "$CHECK_BOOT" = "true" ]; then
-  if [ ! -f /var/run/sundtek.checked ]; then
-    # only once after boot
-    touch /var/run/sundtek.checked
-
-(
-    # wait some time before checking
-    sleep 20
-    cd $SUNDTEK_ADDON_DIR
-
-    wget -O version.latest http://sundtek.de/media/latest.phtml
-
-    version_used=$(cat version.used)
-    version_latest=$(cat version.latest)
-    if [ "$version_used" != "$version_latest" ]; then
-      # new version exist
-      kodi-send -a "Notification(Sundtek, \"New driver version exist, update manually\", 4000, $SUNDTEK_ADDON_DIR/icon.png)"
-    fi
-)&
-  fi
-fi
-
-if [ -z "$(pidof mediasrv)" ]; then
-  rm -f /var/log/mediasrv.log
-  rm -f /var/log/mediaclient.log
-
-  SUNDTEK_CONF_TMP=/tmp/sundtek.conf
-  cp $SUNDTEK_ADDON_HOME/sundtek.conf $SUNDTEK_CONF_TMP
-
-  [ -z "$LOWEST_ADAPTER_NUM" ] && LOWEST_ADAPTER_NUM=0
-  sed -i "s|^first_adapter=.*|first_adapter=$LOWEST_ADAPTER_NUM|g" $SUNDTEK_CONF_TMP
-
-  # enable HW PID filter
-  if [ "$ENABLE_HW_PID_FILTER" = "true" ]; then
-    sed -i 's|^use_hwpidfilter=.*|use_hwpidfilter=on|g' $SUNDTEK_CONF_TMP
-  else
-    sed -i 's|^use_hwpidfilter=.*|use_hwpidfilter=off|g' $SUNDTEK_CONF_TMP
-  fi
-
-  # enable IR receiver
-  if [ "$ENABLE_IR_RECEIVER" = "true" ]; then
-    sed -i 's|^ir_disabled=.*|ir_disabled=0|g' $SUNDTEK_CONF_TMP
-  else
-    sed -i 's|^ir_disabled=.*|ir_disabled=1|g' $SUNDTEK_CONF_TMP
-  fi
-
-  if [ "$ALLOW_NET_USE" = "true" ]; then
-    sed -i 's|^enablenetwork=.*|enablenetwork=on|g' $SUNDTEK_CONF_TMP
-  else
-    sed -i 's|^enablenetwork=.*|enablenetwork=off|g' $SUNDTEK_CONF_TMP
-  fi
-
-  [ "$DEVICE1_IP" = "0.0.0.0" ] && DEVICE1_IP=""
-  [ "$DEVICE2_IP" = "0.0.0.0" ] && DEVICE2_IP=""
-  [ "$DEVICE3_IP" = "0.0.0.0" ] && DEVICE3_IP=""
-  [ "$DEVICE4_IP" = "0.0.0.0" ] && DEVICE4_IP=""
-  [ "$DEVICE5_IP" = "0.0.0.0" ] && DEVICE5_IP=""
-  DEVICE1_NUM=$(net_tuner_num_fix $DEVICE1_NUM)
-  DEVICE2_NUM=$(net_tuner_num_fix $DEVICE2_NUM)
-  DEVICE3_NUM=$(net_tuner_num_fix $DEVICE3_NUM)
-  DEVICE4_NUM=$(net_tuner_num_fix $DEVICE4_NUM)
-  DEVICE5_NUM=$(net_tuner_num_fix $DEVICE5_NUM)
-
-  if [ "$USE_NET_TUNERS" = "true" -a -n "$DEVICE1_IP" ]; then
-    # delete all network tuner entries
-    awk '/^\[NETWORK\]/{flag=1; next} /^device=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-net
-    mv ${SUNDTEK_CONF_TMP}-net $SUNDTEK_CONF_TMP
-    echo "" >>$SUNDTEK_CONF_TMP
-    # remove empty lines at the end of file
-    sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
-    # add entries
-    echo -e "\n[NETWORK]" >>$SUNDTEK_CONF_TMP
-    for dev in $(seq 0 $DEVICE1_NUM); do
-      echo "device=$DEVICE1_IP:$dev" >>$SUNDTEK_CONF_TMP
-    done
-    if [ -n "$DEVICE2_IP" ]; then
-      for dev in $(seq 0 $DEVICE2_NUM); do
-        echo "device=$DEVICE2_IP:$dev" >>$SUNDTEK_CONF_TMP
-      done
-      if [ -n "$DEVICE3_IP" ]; then
-        for dev in $(seq 0 $DEVICE3_NUM); do
-          echo "device=$DEVICE3_IP:$dev" >>$SUNDTEK_CONF_TMP
-        done
-        if [ -n "$DEVICE4_IP" ]; then
-          for dev in $(seq 0 $DEVICE4_NUM); do
-            echo "device=$DEVICE4_IP:$dev" >>$SUNDTEK_CONF_TMP
-          done
-          if [ -n "$DEVICE5_IP" ]; then
-            for dev in $(seq 0 $DEVICE5_NUM); do
-              echo "device=$DEVICE5_IP:$dev" >>$SUNDTEK_CONF_TMP
-            done
-          fi
-        fi
-      fi
-    fi
-  else
-    # delete all network tuner entries
-    awk '/^\[NETWORK\]/{flag=1; next} /^device=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-net
-    mv ${SUNDTEK_CONF_TMP}-net $SUNDTEK_CONF_TMP
-    echo "" >>$SUNDTEK_CONF_TMP
-    # remove empty lines at the end of file
-    sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
-  fi
-
-  if [ "$ENABLE_TUNER_TYPES" = "true" ]; then
-    # get tuner serial numbers
-    SERIALS=$(cat /var/config/sundtek-addon.conf | sed -n 's|^ATTACHED_TUNER_\(.*\)_DVBMODE=.*|\1|gp' | sort | uniq)
-    . /var/config/sundtek-addon.conf
-
-    for SERIAL in $SERIALS; do
-      DVBMODE=$(eval echo \$ATTACHED_TUNER_${SERIAL}_DVBMODE)
-      IRPROT=$(eval echo \$ATTACHED_TUNER_${SERIAL}_IRPROT)
-      KEYMAP=$(eval echo \$ATTACHED_TUNER_${SERIAL}_KEYMAP)
-
-      if [ "$DVBMODE" = "DVB-T" ]; then
-        # only set DVB-T because default is DVB-C (and DVB-S is not set either)
-        DVBMODE="DVBT"
-      else
-        DVBMODE=""
-      fi
-
-      [ "$IRPROT" = "NEC" -o "$IRPROT" = "auto" ] && IRPROT=""
-
-      [ ! -f $KEYMAP ] && KEYMAP=""
-
-      # remove setttings for this tuner
-      awk -v val="[$SERIAL]" '$0 == val {flag=1; next} /^ir_protocol=|^rcmap=|^initial_dvb_mode=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-types
-      mv ${SUNDTEK_CONF_TMP}-types $SUNDTEK_CONF_TMP
-      echo "" >>$SUNDTEK_CONF_TMP
-      # remove empty lines at the end of file
-      sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
-
-      ADDNEW=true
-      if [ -n "$DVBMODE" ]; then
-        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
-        echo "initial_dvb_mode=$DVBMODE" >>$SUNDTEK_CONF_TMP
-      fi
-      if [ -n "$IRPROT" ]; then
-        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
-        echo "ir_protocol=$IRPROT" >>$SUNDTEK_CONF_TMP
-      fi
-      if [ -n "$KEYMAP" ]; then
-        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
-        echo "rcmap=$KEYMAP" >>$SUNDTEK_CONF_TMP
-      fi
-
-      echo "" >>$SUNDTEK_CONF_TMP
-    done
-  fi
-
-  md5_1=$(md5sum -b $SUNDTEK_CONF_TMP | awk '{print $1}')
-  md5_2=$(md5sum -b $SUNDTEK_ADDON_HOME/sundtek.conf | awk '{print $1}')
-  if [ "$md5_1" != "$md5_2" ]; then
-    # file changed - copy to addon home
-    cp $SUNDTEK_CONF_TMP $SUNDTEK_ADDON_HOME/sundtek.conf
-  fi
-
-  chmod +x $SUNDTEK_ADDON_DIR/bin/*
-  mediasrv --wait-for-devices -p $SUNDTEK_ADDON_DIR/bin -c $SUNDTEK_ADDON_HOME/sundtek.conf -d
-
-  # wait few seconds
-  [ -z "$SETTLE_TIME" ] && SETTLE_TIME=0
-  SETTLE_TIME=$(( $SETTLE_TIME *1 ))
-  if [ $SETTLE_TIME -gt 0 ]; then
-    logger -t Sundtek "### Settle for $SETTLE_TIME sec ###"
-    sleep $SETTLE_TIME
-  fi
-
-  if [ "$RUN_USER_SCRIPT" = "true" -a -f "$SUNDTEK_ADDON_HOME/userscript.sh" ]; then
-    logger -t Sundtek "### Running user script $SUNDTEK_ADDON_HOME/userscript.sh ###"
-    cat $SUNDTEK_ADDON_HOME/userscript.sh | dos2unix >/var/run/sundtek-userscript.sh
-    sh /var/run/sundtek-userscript.sh
-  fi
-
-  # save adapter serial number
-  serial_number_old=$(cat $SUNDTEK_ADDON_HOME/adapters.txt 2>/dev/null)
-  serial_number_new=$(mediaclient -e | awk '/device / {print $0} /SERIAL/ {id=1} /ID:/ {if (id==1) print $2}')
-  if [ "$serial_number_old" != "$serial_number_new" ]; then
-    echo "$serial_number_new" >$SUNDTEK_ADDON_HOME/adapters.txt
-  fi
-fi
-
-logger -t Sundtek "### Sundtek ready ###"

packages/addons/driver/sundtek-mediatv/source/bin/sundtek-update-driver.sh

@@ -1,117 +0,0 @@
-#!/bin/sh
-
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
-#
-#  OpenELEC is free software: you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation, either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  OpenELEC is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
-################################################################################
-
-. /etc/profile
-
-SUNDTEK_ADDON_DIR="$HOME/.kodi/addons/driver.dvb.sundtek-mediatv"
-SUNDTEK_ADDON_HOME="$HOME/.kodi/userdata/addon_data/driver.dvb.sundtek-mediatv"
-SUNDTEK_ADDON_SETTINGS="$SUNDTEK_ADDON_HOME/settings.xml"
-
-trap_exit_install() {
-  kodi-send -a "Notification(Sundtek, Something went wrong. Cleaning..., 8000, $SUNDTEK_ADDON_DIR/icon.png)"
-  cd "$SUNDTEK_ADDON_DIR"
-  rm -fr tmp
-  exit 5
-}
-
-# kill process
-systemctl stop driver.dvb.sundtek-mediatv
-killall -9 mediaclient &>/dev/null
-killall -9 mediasrv &>/dev/null
-
-# exit on errors
-set -e
-
-trap trap_exit_install EXIT
-
-cd "$SUNDTEK_ADDON_DIR"
-rm -fr tmp
-mkdir tmp
-cd tmp
-
-logger -t Sundtek "### Starting updating driver ###"
-kodi-send -a "Notification(Sundtek, Starting updating driver, 2000, $SUNDTEK_ADDON_DIR/icon.png)"
-
-wget -O ../version.used http://sundtek.de/media/latest.phtml
-if [ $? -ne 0 ]; then
-  logger -t Sundtek "### Can't get latest version ###"
-  kodi-send -a "Notification(Sundtek, Cant get latest version, 8000, $SUNDTEK_ADDON_DIR/icon.png)"
-  cd ..
-  rm -fr tmp/
-  exit 1
-fi
-
-ARCH=$(sed -n 's|.*\.\([^-]*\)-.*|\1|p' /etc/release | tr -d '\n')
-if [ "$ARCH" = "x86_64" ]; then
-  INSTALLER_URL="http://sundtek.de/media/netinst/64bit/installer.tar.gz"
-elif [ "$ARCH" = "arm" ]; then
-  INSTALLER_URL="http://sundtek.de/media/netinst/armsysvhf/installer.tar.gz"
-else
-  logger -t Sundtek "### Unsupported architecture ###"
-  kodi-send -a "Notification(Sundtek, Unsupported architecture, 8000, $SUNDTEK_ADDON_DIR/icon.png)"
-  cd ..
-  rm -fr tmp
-  exit 2
-fi
-
-logger -t Sundtek "### Downloading driver archive for $ARCH ###"
-kodi-send -a "Notification(Sundtek, Downloading driver archive for $ARCH, 2000, $SUNDTEK_ADDON_DIR/icon.png)"
-wget -O installer.tar.gz $INSTALLER_URL
-if [ $? -ne 0 ]; then
-  logger -t Sundtek "### Archive damaged ###"
-  kodi-send -a "Notification(Sundtek, Download failed, 8000, $SUNDTEK_ADDON_DIR/icon.png)"
-  cd ..
-  rm -fr tmp/
-  exit 3
-fi
-
-logger -t Sundtek "### Extracting archive ###"
-kodi-send -a "Notification(Sundtek, Extracting archive, 2000, $SUNDTEK_ADDON_DIR/icon.png)"
-tar -xzf installer.tar.gz
-if [ $? -ne 0 ]; then
-  logger -t Sundtek "### Archive damaged ###"
-  kodi-send -a "Notification(Sundtek, Archive damaged, 8000, $SUNDTEK_ADDON_DIR/icon.png)"
-  cd ..
-  rm -fr tmp/
-  exit 4
-fi
-
-# fix permissions
-chmod -R 755 opt/ etc/
-
-rm -f  opt/bin/getinput.sh
-rm -f  opt/bin/lirc.sh
-rm -fr opt/lib/pm/
-
-cp -Pa opt/bin/* ../bin/
-cp -Pa opt/lib/* ../lib/
-
-cd ..
-rm -fr tmp
-
-logger -t Sundtek "### Driver update finished ###"
-kodi-send -a "Notification(Sundtek, Driver update finished, 5000, $SUNDTEK_ADDON_DIR/icon.png)"
-kodi-send -a "Notification(Sundtek, Please reboot, 5000, $SUNDTEK_ADDON_DIR/icon.png)"
-
-trap - EXIT
-
-systemctl start driver.dvb.sundtek-mediatv
-
-exit 0

packages/addons/driver/sundtek-mediatv/source/bin/userspace-driver.sh

@@ -2,7 +2,7 @@
 
 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#      Copyright (C) 2009-2013 Stephan Raue (stephan@openelec.tv)
 #
 #  OpenELEC is free software: you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
@@ -20,11 +20,223 @@
 
 . /etc/profile
 
-SUNDTEK_ADDON_DIR="$HOME/.kodi/addons/driver.dvb.sundtek-mediatv"
+# start locking mechanism - allows only one instance to be run at a time
+SUNDTEK_LOCKFILE="/var/lock/userspace-driver-sundtek.lck"
+SUNDTEK_LOCKFD=99
+# obtain an exclusive lock
+exlock() { eval "exec $SUNDTEK_LOCKFD>\"$SUNDTEK_LOCKFILE\""; flock -x $SUNDTEK_LOCKFD; }
+# drop a lock
+unlock() { flock -u $SUNDTEK_LOCKFD; flock -xn $SUNDTEK_LOCKFD && rm -f "$SUNDTEK_LOCKFILE"; }
+# end locking mechanism
 
-if [ -f $SUNDTEK_ADDON_DIR/lib/libmediaclient.so ]; then
-  logger -t Sundtek "### Preloading library ###"
-  export LD_PRELOAD=$SUNDTEK_ADDON_DIR/lib/libmediaclient.so
+# exclusive lock
+exlock
+
+net_tuner_num_fix() {
+  local num=$1
+
+  [ -z "$num" ] && num=1
+  num=$(( $num *1 ))
+  [ $num -lt 1 ] && num=1
+  num=$(( $num -1 ))
+  echo $num
+}
+
+SUNDTEK_ADDON_DIR="$HOME/.xbmc/addons/driver.dvb.sundtek-mediatv"
+SUNDTEK_ADDON_HOME="$HOME/.xbmc/userdata/addon_data/driver.dvb.sundtek-mediatv"
+SUNDTEK_ADDON_SETTINGS="$SUNDTEK_ADDON_HOME/settings.xml"
+
+mkdir -p $SUNDTEK_ADDON_HOME
+
+if [ ! -f "$SUNDTEK_ADDON_HOME/sundtek.conf" ]; then
+  cp $SUNDTEK_ADDON_DIR/config/* $SUNDTEK_ADDON_HOME/
 else
-  logger -t Sundtek "### Preloading library doesn't exist ###"
+  # in case of missing entries in addon home's sundtek.conf
+  entry_set="$(grep use_hwpidfilter $SUNDTEK_ADDON_HOME/sundtek.conf 2>/dev/null)"
+  if [ -z "$entry_set" ]; then
+    sed -i 's|^device_attach=.*|# device_attach not used anymore\n\n# enable HW PID filter\nuse_hwpidfilter=off\n\n# enable listening on network\nenablenetwork=off|g' $SUNDTEK_ADDON_HOME/sundtek.conf
+    sed -i 's|^#first_adapter=.*|first_adapter=0|g' $SUNDTEK_ADDON_HOME/sundtek.conf
+
+    sed -i 's|.*network tuner IP address (OpenELEC specific).*||g' $SUNDTEK_ADDON_HOME/sundtek.conf
+    sed -i 's|.*network_tuner_ip=.*||g' $SUNDTEK_ADDON_HOME/sundtek.conf
+  fi
 fi
+
+if [ ! -f "$SUNDTEK_ADDON_SETTINGS" ]; then
+  cp $SUNDTEK_ADDON_DIR/settings-default.xml $SUNDTEK_ADDON_SETTINGS
+fi
+
+[ ! -f $SUNDTEK_ADDON_HOME/rc_key_enter.map ] && mv $SUNDTEK_ADDON_HOME/rc_key_enter $SUNDTEK_ADDON_HOME/rc_key_enter.map
+[ ! -f $SUNDTEK_ADDON_HOME/rc_key_ok.map ] && mv $SUNDTEK_ADDON_HOME/rc_key_ok $SUNDTEK_ADDON_HOME/rc_key_ok.map
+
+mkdir -p /var/config
+cat "$SUNDTEK_ADDON_SETTINGS" | awk -F\" '{print $2"=\""$4"\""}' | sed '/^=/d' > /var/config/sundtek-addon.conf
+. /var/config/sundtek-addon.conf
+
+export LD_PRELOAD=$SUNDTEK_ADDON_DIR/lib/libmediaclient.so
+
+if [ -z "$(pidof mediasrv)" ]; then
+  rm -f /var/log/mediasrv.log
+  rm -f /var/log/mediaclient.log
+
+  SUNDTEK_CONF_TMP=/tmp/sundtek.conf
+  cp $SUNDTEK_ADDON_HOME/sundtek.conf $SUNDTEK_CONF_TMP
+
+  [ -z "$LOWEST_ADAPTER_NUM" ] && LOWEST_ADAPTER_NUM=0
+  sed -i "s|^first_adapter=.*|first_adapter=$LOWEST_ADAPTER_NUM|g" $SUNDTEK_CONF_TMP
+
+  # enable HW PID filter
+  if [ "$ENABLE_HW_PID_FILTER" = "true" ]; then
+    sed -i 's|^use_hwpidfilter=.*|use_hwpidfilter=on|g' $SUNDTEK_CONF_TMP
+  else
+    sed -i 's|^use_hwpidfilter=.*|use_hwpidfilter=off|g' $SUNDTEK_CONF_TMP
+  fi
+
+  # enable IR receiver
+  if [ "$ENABLE_IR_RECEIVER" = "true" ]; then
+    sed -i 's|^ir_disabled=.*|ir_disabled=0|g' $SUNDTEK_CONF_TMP
+  else
+    sed -i 's|^ir_disabled=.*|ir_disabled=1|g' $SUNDTEK_CONF_TMP
+  fi
+
+  if [ "$ALLOW_NET_USE" = "true" ]; then
+    sed -i 's|^enablenetwork=.*|enablenetwork=on|g' $SUNDTEK_CONF_TMP
+  else
+    sed -i 's|^enablenetwork=.*|enablenetwork=off|g' $SUNDTEK_CONF_TMP
+  fi
+
+  [ "$DEVICE1_IP" = "0.0.0.0" ] && DEVICE1_IP=""
+  [ "$DEVICE2_IP" = "0.0.0.0" ] && DEVICE2_IP=""
+  [ "$DEVICE3_IP" = "0.0.0.0" ] && DEVICE3_IP=""
+  [ "$DEVICE4_IP" = "0.0.0.0" ] && DEVICE4_IP=""
+  [ "$DEVICE5_IP" = "0.0.0.0" ] && DEVICE5_IP=""
+  DEVICE1_NUM=$(net_tuner_num_fix $DEVICE1_NUM)
+  DEVICE2_NUM=$(net_tuner_num_fix $DEVICE2_NUM)
+  DEVICE3_NUM=$(net_tuner_num_fix $DEVICE3_NUM)
+  DEVICE4_NUM=$(net_tuner_num_fix $DEVICE4_NUM)
+  DEVICE5_NUM=$(net_tuner_num_fix $DEVICE5_NUM)
+
+  if [ "$USE_NET_TUNERS" = "true" -a -n "$DEVICE1_IP" ]; then
+    # delete all network tuner entries
+    awk '/^\[NETWORK\]/{flag=1; next} /^device=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-net
+    mv ${SUNDTEK_CONF_TMP}-net $SUNDTEK_CONF_TMP
+    echo "" >>$SUNDTEK_CONF_TMP
+    # remove empty lines at the end of file
+    sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
+    # add entries
+    echo -e "\n[NETWORK]" >>$SUNDTEK_CONF_TMP
+    for dev in $(seq 0 $DEVICE1_NUM); do
+      echo "device=$DEVICE1_IP:$dev" >>$SUNDTEK_CONF_TMP
+    done
+    if [ -n "$DEVICE2_IP" ]; then
+      for dev in $(seq 0 $DEVICE2_NUM); do
+        echo "device=$DEVICE2_IP:$dev" >>$SUNDTEK_CONF_TMP
+      done
+      if [ -n "$DEVICE3_IP" ]; then
+        for dev in $(seq 0 $DEVICE3_NUM); do
+          echo "device=$DEVICE3_IP:$dev" >>$SUNDTEK_CONF_TMP
+        done
+        if [ -n "$DEVICE4_IP" ]; then
+          for dev in $(seq 0 $DEVICE4_NUM); do
+            echo "device=$DEVICE4_IP:$dev" >>$SUNDTEK_CONF_TMP
+          done
+          if [ -n "$DEVICE5_IP" ]; then
+            for dev in $(seq 0 $DEVICE5_NUM); do
+              echo "device=$DEVICE5_IP:$dev" >>$SUNDTEK_CONF_TMP
+            done
+          fi
+        fi
+      fi
+    fi
+  else
+    # delete all network tuner entries
+    awk '/^\[NETWORK\]/{flag=1; next} /^device=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-net
+    mv ${SUNDTEK_CONF_TMP}-net $SUNDTEK_CONF_TMP
+    echo "" >>$SUNDTEK_CONF_TMP
+    # remove empty lines at the end of file
+    sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
+  fi
+
+  if [ "$ENABLE_TUNER_TYPES" = "true" ]; then
+    # get tuner serial numbers
+    SERIALS=$(cat /var/config/sundtek-addon.conf | sed -n 's|^ATTACHED_TUNER_\(.*\)_DVBMODE=.*|\1|gp' | sort | uniq)
+    . /var/config/sundtek-addon.conf
+
+    for SERIAL in $SERIALS; do
+      DVBMODE=$(eval echo \$ATTACHED_TUNER_${SERIAL}_DVBMODE)
+      IRPROT=$(eval echo \$ATTACHED_TUNER_${SERIAL}_IRPROT)
+      KEYMAP=$(eval echo \$ATTACHED_TUNER_${SERIAL}_KEYMAP)
+
+      if [ "$DVBMODE" = "DVB-T" ]; then
+        # only set DVB-T because default is DVB-C (and DVB-S is not set either)
+        DVBMODE="DVBT"
+      else
+        DVBMODE=""
+      fi
+
+      [ "$IRPROT" = "NEC" -o "$IRPROT" = "auto" ] && IRPROT=""
+
+      [ ! -f $KEYMAP ] && KEYMAP=""
+
+      # remove setttings for this tuner
+      awk -v val="[$SERIAL]" '$0 == val {flag=1; next} /^ir_protocol=|^rcmap=|^initial_dvb_mode=|^#|^$/{if (flag==1) next} /.*/{flag=0; print}' $SUNDTEK_CONF_TMP >${SUNDTEK_CONF_TMP}-types
+      mv ${SUNDTEK_CONF_TMP}-types $SUNDTEK_CONF_TMP
+      echo "" >>$SUNDTEK_CONF_TMP
+      # remove empty lines at the end of file
+      sed -i -e ':a' -e '/^\n*$/{$d;N;};/\n$/ba' $SUNDTEK_CONF_TMP
+
+      ADDNEW=true
+      if [ -n "$DVBMODE" ]; then
+        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
+        echo "initial_dvb_mode=$DVBMODE" >>$SUNDTEK_CONF_TMP
+      fi
+      if [ -n "$IRPROT" ]; then
+        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
+        echo "ir_protocol=$IRPROT" >>$SUNDTEK_CONF_TMP
+      fi
+      if [ -n "$KEYMAP" ]; then
+        [ $ADDNEW = true ] && ADDNEW=false && echo -e "\n[$SERIAL]" >>$SUNDTEK_CONF_TMP
+        echo "rcmap=$KEYMAP" >>$SUNDTEK_CONF_TMP
+      fi
+
+      echo "" >>$SUNDTEK_CONF_TMP
+    done
+  fi
+
+  md5_1=$(md5sum -b $SUNDTEK_CONF_TMP | awk '{print $1}')
+  md5_2=$(md5sum -b $SUNDTEK_ADDON_HOME/sundtek.conf | awk '{print $1}')
+  if [ "$md5_1" != "$md5_2" ]; then
+    # file changed - copy to addon home
+    cp $SUNDTEK_CONF_TMP $SUNDTEK_ADDON_HOME/sundtek.conf
+  fi
+
+  mediasrv --wait-for-devices -p $SUNDTEK_ADDON_DIR/bin -c $SUNDTEK_ADDON_HOME/sundtek.conf -d
+
+  # wait few seconds
+  [ -z "$SETTLE_TIME" ] && SETTLE_TIME=0
+  SETTLE_TIME=$(( $SETTLE_TIME *1 ))
+  if [ $SETTLE_TIME -gt 0 ]; then
+    logger -t Sundtek "### Settle for $SETTLE_TIME sec ###"
+    sleep $SETTLE_TIME
+  fi
+
+  if [ "$RUN_USER_SCRIPT" = "true" -a -f "$SUNDTEK_ADDON_HOME/userscript.sh" ]; then
+    logger -t Sundtek "### Running user script $SUNDTEK_ADDON_HOME/userscript.sh ###"
+    cat $SUNDTEK_ADDON_HOME/userscript.sh | dos2unix >/var/run/sundtek-userscript.sh
+    sh /var/run/sundtek-userscript.sh
+  fi
+(
+  # save adapter serial number in background
+  sleep 5
+  serial_number_old=$(cat $SUNDTEK_ADDON_HOME/adapters.txt 2>/dev/null)
+  serial_number_new=$(mediaclient.bin -e | awk '/device / {print $0} /ID:/ {print $2}')
+  if [ "$serial_number_old" != "$serial_number_new" ]; then
+    echo "$serial_number_new" >$SUNDTEK_ADDON_HOME/adapters.txt
+  fi
+)&
+fi
+
+logger -t Sundtek "### Sundtek ready ###"
+
+# unlock the lock
+unlock

packages/addons/driver/sundtek-mediatv/source/default.py

@@ -15,3 +15,22 @@
 #  You should have received a copy of the GNU General Public License
 #  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
 ################################################################################
+
+import os
+import sys
+import xbmcaddon
+
+__settings__      = xbmcaddon.Addon(id = 'driver.dvb.sundtek-mediatv')
+__cwd__           = __settings__.getAddonInfo('path')
+__resources_lib__ = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'lib'))
+__settings_xml__  = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'settings.xml'))
+
+__mediaclient__   = xbmc.translatePath(os.path.join(__cwd__, 'bin', 'mediaclient.bin'))
+__ld_preload__    = xbmc.translatePath(os.path.join(__cwd__, 'lib', 'libmediaclient.so'))
+__mediaclient_e__ = 'LD_PRELOAD=' + __ld_preload__ + ' ' + __mediaclient__ + ' -e'
+
+if __name__ == "__main__" and len(sys.argv) == 2 and sys.argv[1] == 'refresh_tuners':
+  sys.path.append(__resources_lib__)
+  from functions import refresh_sundtek_tuners
+  refresh_sundtek_tuners(__settings_xml__, __mediaclient_e__)
+  __settings__.openSettings()

packages/addons/driver/sundtek-mediatv/source/resources/actions.py

@@ -1,45 +0,0 @@
-################################################################################
-#      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
-#
-#  OpenELEC is free software: you can redistribute it and/or modify
-#  it under the terms of the GNU General Public License as published by
-#  the Free Software Foundation, either version 2 of the License, or
-#  (at your option) any later version.
-#
-#  OpenELEC is distributed in the hope that it will be useful,
-#  but WITHOUT ANY WARRANTY; without even the implied warranty of
-#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#  GNU General Public License for more details.
-#
-#  You should have received a copy of the GNU General Public License
-#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
-################################################################################
-
-import os
-import sys
-import subprocess
-import xbmcaddon
-
-__settings__      = xbmcaddon.Addon(id = 'driver.dvb.sundtek-mediatv')
-__cwd__           = __settings__.getAddonInfo('path')
-__resources_lib__ = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'lib'))
-__settings_xml__  = xbmc.translatePath(os.path.join(__cwd__, 'resources', 'settings.xml'))
-
-__mediaclient__   = xbmc.translatePath(os.path.join(__cwd__, 'bin', 'mediaclient'))
-__mediaclient_e__ = __mediaclient__ + ' -e'
-__update_sh__     = xbmc.translatePath(os.path.join(__cwd__, 'bin', 'sundtek-update-driver.sh'))
-
-if len(sys.argv) == 2:
-  if sys.argv[1] == 'refresh_tuners':
-    print "sundtek refresh tuners"
-    sys.path.append(__resources_lib__)
-    from functions import refresh_sundtek_tuners
-    refresh_sundtek_tuners(__settings_xml__, __mediaclient_e__)
-    __settings__.openSettings()
-  elif sys.argv[1] == 'update_driver':
-    print "sundtek update driver"
-    proc = subprocess.Popen([__update_sh__], shell = True)
-    return_code = proc.wait()
-    print "sundtek update driver return value " + str(return_code)
-    __settings__.openSettings()

packages/addons/driver/sundtek-mediatv/source/resources/language/English/strings.xml

@@ -27,8 +27,4 @@
   <string id="9010">Refresh tuners... (press me)</string>
   <string id="9020">    IR protocol</string>
   <string id="9030">    keymap filename</string>
-
-  <string id="3000">Driver</string>
-  <string id="3020">Check for new driver version at boot</string>
-  <string id="3010">Update from web... (press me)</string>
 </strings>

packages/addons/driver/sundtek-mediatv/source/resources/lib/functions.py

@@ -1,6 +1,6 @@
 ################################################################################
 #      This file is part of OpenELEC - http://www.openelec.tv
-#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#      Copyright (C) 2009-2013 Stephan Raue (stephan@openelec.tv)
 #
 #  OpenELEC is free software: you can redistribute it and/or modify
 #  it under the terms of the GNU General Public License as published by
@@ -22,7 +22,7 @@ import shutil
 import xmlpp
 from xml.dom import minidom
 
-__sundtek_userspace__ = '/storage/.kodi/userdata/addon_data/driver.dvb.sundtek-mediatv/'
+__sundtek_userspace__ = '/storage/.xbmc/userdata/addon_data/driver.dvb.sundtek-mediatv/'
 
 ######################################################################################################
 # backup setting.xml file only if backup doesn't exist

packages/addons/driver/sundtek-mediatv/source/resources/lib/xmlpp.py

@@ -37,39 +37,36 @@ def _usage(this_file):
     return """SYNOPSIS: pretty print an XML document
 USAGE: python %s <filename> \n""" % this_file
 
-def _pprint_line(indent_level, line, width=100, output=_sys.stdout, ignore_contents = False):
+def _pprint_line(indent_level, line, width=100, output=_sys.stdout):
     if line.strip():
         start = ""
         number_chars = 0
         for l in range(indent_level):
             start = start + " "
             number_chars = number_chars + 1
-        if not ignore_contents:
-            try:
-                elem_start = _re.findall("(\<\W{0,1}\w+:\w+) ?", line)[0]
-                elem_finished = _re.findall("([?|\]\]/|\-\-]*\>)", line)[0] 
-                #should not have *
-                attrs = _re.findall("(\S*?\=\".*?\")", line)
-                output.write(start + elem_start)
-                number_chars = len(start + elem_start)
-                for attr in attrs:
-                    if (attrs.index(attr) + 1) == len(attrs):
-                        number_chars = number_chars + len(elem_finished)
-                    if (number_chars + len(attr) + 1) > width:
-                        output.write("\n")
-                        for i in range(len(start + elem_start) + 1):
-                            output.write(" ")
-                        number_chars = len(start + elem_start) + 1 
-                    else:
+        try:
+            elem_start = _re.findall("(\<\W{0,1}\w+:\w+) ?", line)[0]
+            elem_finished = _re.findall("([?|\]\]/]*\>)", line)[0] 
+            #should not have *
+            attrs = _re.findall("(\S*?\=\".*?\")", line)
+            output.write(start + elem_start)
+            number_chars = len(start + elem_start)
+            for attr in attrs:
+                if (attrs.index(attr) + 1) == len(attrs):
+                    number_chars = number_chars + len(elem_finished)
+                if (number_chars + len(attr) + 1) > width:
+                    output.write("\n")
+                    for i in range(len(start + elem_start) + 1):
                         output.write(" ")
-                        number_chars = number_chars + 1
-                    output.write(attr)
-                    number_chars = number_chars + len(attr)
-                output.write(elem_finished + "\n")
-            except IndexError:
-                #give up pretty print this line
-                output.write(start + line + "\n")
-        else:
+                    number_chars = len(start + elem_start) + 1 
+                else:
+                    output.write(" ")
+                    number_chars = number_chars + 1
+                output.write(attr)
+                number_chars = number_chars + len(attr)
+            output.write(elem_finished + "\n")
+        except IndexError:
+            #give up pretty print this line
             output.write(start + line + "\n")
                 
 
@@ -83,8 +80,7 @@ def _get_next_elem(data):
     start_pos = data.find("<")
     end_pos = data.find(">") + 1
     retval = data[start_pos:end_pos]
-    stopper = retval.rfind("/")
-    ignore_contents = False
+    stopper = retval.rfind("/") 
     if stopper < retval.rfind("\""):
         stopper = -1
     single = (stopper > -1 and ((retval.find(">") - stopper) < (stopper - retval.find("<"))))
@@ -93,19 +89,11 @@ def _get_next_elem(data):
     ignore_question =  retval.find("<?") > -1
 
     if ignore_excl:
-        ignore_contents = True
         cdata = retval.find("<![CDATA[") > -1
         if cdata:
             end_pos = data.find("]]>")
             if end_pos > -1:
                 end_pos = end_pos + len("]]>")
-                stopper = end_pos
-        else:
-            end_pos = data.find("-->")
-            if end_pos > -1:
-                end_pos = end_pos + len("-->")
-                stopper = end_pos
-        retval = data[start_pos:end_pos]
 
     elif ignore_question:
         end_pos = data.find("?>") + len("?>")
@@ -113,12 +101,11 @@ def _get_next_elem(data):
     
     no_indent = ignore or single
 
-    
+    #print retval, end_pos, start_pos, stopper > -1, no_indent
     return start_pos, \
            end_pos, \
            stopper > -1, \
-           no_indent, \
-           ignore_contents
+           no_indent
 
 def get_pprint(xml, indent=4, width=80):
     """Returns the pretty printed xml """
@@ -129,8 +116,6 @@ def get_pprint(xml, indent=4, width=80):
             self.output += string
     out = out()
     pprint(xml, output=out, indent=indent, width=width)
-    
-
 
     return out.output
 
@@ -141,7 +126,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
     Use indent to select indentation level. Default is 4   """
     data = xml
     indent_level = 0
-    start_pos, end_pos, is_stop, no_indent, ignore_contents  = _get_next_elem(data)
+    start_pos, end_pos, is_stop, no_indent  = _get_next_elem(data)
     while ((start_pos > -1 and end_pos > -1)):
         _pprint_elem_content(indent_level, data[:start_pos].strip(), 
                              output=output)
@@ -151,8 +136,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
         _pprint_line(indent_level, 
                      data[:end_pos - start_pos], 
                      width=width,
-                     output=output,
-                     ignore_contents=ignore_contents)
+                     output=output)
         data = data[end_pos - start_pos:]
         if not is_stop and not no_indent :
             indent_level = indent_level + indent
@@ -160,7 +144,7 @@ def pprint(xml, output=_sys.stdout, indent=4, width=80):
         if not data:
             break
         else:
-            start_pos, end_pos, is_stop, no_indent, ignore_contents  = _get_next_elem(data)
+            start_pos, end_pos, is_stop, no_indent  = _get_next_elem(data)
     
 
 if __name__ == "__main__":

packages/addons/driver/sundtek-mediatv/source/resources/settings.xml

@@ -27,11 +27,6 @@
   <category label="9000">
     <setting type="sep" />
     <setting id="ENABLE_TUNER_TYPES" type="bool" label="9005" default="true" />
-    <setting label="9010" option="close" type="action" id="refresh_tuners" action="RunScript($CWD/resources/actions.py, refresh_tuners)" />
-  </category>
-  <category label="3000">
-    <setting type="sep" />
-    <setting id="CHECK_BOOT" type="bool" label="3020" default="false" />
-    <setting label="3010" option="close" type="action" id="update_driver" action="RunScript($CWD/resources/actions.py, update_driver)" />
+    <setting label="9010" option="close" type="action" action="RunScript($ID, refresh_tuners)" />
   </category>
 </settings>

packages/addons/driver/sundtek-mediatv/source/sleep.d/99-sundtek-mediatv.power

@@ -25,10 +25,9 @@ oe_setup_addon driver.dvb.sundtek-mediatv
 if [ "$SUSPEND_DRIVER" = "true" ]; then
   case "$1" in
     pre)
-      systemctl stop driver.dvb.sundtek-mediatv.service
+      killall -9 mediasrv &>/dev/null
       ;;
     post)
-    	systemctl start driver.dvb.sundtek-mediatv.service
       ;;
   esac
 fi

packages/addons/driver/sundtek-mediatv/source/system.d/driver.dvb.sundtek-mediatv.service

@@ -1,12 +0,0 @@
-[Unit]
-Description=Sundtek driver service
-After=network.target
-
-[Service]
-Type=oneshot
-ExecStart=-/bin/sh -c "exec sh /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/sundtek-mediatv.start"
-ExecStop=-/bin/sh -c "exec sh /storage/.kodi/addons/driver.dvb.sundtek-mediatv/bin/sundtek-mediatv.stop"
-RemainAfterExit=yes
-
-[Install]
-WantedBy=kodi.target

packages/addons/repository/repository.unofficial.addon.pro/package.mk

@@ -19,7 +19,7 @@
 ################################################################################
 
 PKG_NAME="repository.unofficial.addon.pro"
-PKG_VERSION="6.0"
+PKG_VERSION="4.1.2"
 PKG_REV="2"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
@@ -33,17 +33,15 @@ PKG_LONGDESC="Unfficial OpenELEC.tv Add-on Repository"
 
 PKG_IS_ADDON="yes"
 PKG_ADDON_TYPE="xbmc.addon.repository"
-PKG_ADDON_PROVIDES=""
 
 PKG_AUTORECONF="no"
 
 PKG_MAINTAINER="unofficial.addon.pro"
 
 make_target() {
-  $SED -e "s|@PROJECT@|$PROJECT|g" \
+  $SED -e "s|@ADDON_VERSION@|$ADDON_VERSION|g" \
+     -e "s|@PROJECT@|$PROJECT|g" \
      -e "s|@ARCH@|$TARGET_ARCH|g" \
-     -e "s|@PKG_VERSION@|$PKG_VERSION|g" \
-     -e "s|@PKG_REV@|$PKG_REV|g"\
   -i addon.xml
 }
 

packages/addons/repository/repository.unofficial.addon.pro/sources/addon.xml

@@ -1,20 +1,20 @@
 <?xml version="1.0" encoding="UTF-8" standalone="yes"?>
 <addon id="repository.unofficial.addon.pro"
-                name="[COLOR FF757677]Open[/COLOR][COLOR FF8ABEE2]ELEC[/COLOR] Add-ons (unofficial)"
-                version="@PKG_VERSION@.@PKG_REV@"
-                provider-name="OpenELEC Community">
+                name="Unofficial [COLOR FF757677]Open[/COLOR][COLOR FF8ABEE2]ELEC[/COLOR] Mediacenter OS Add-ons"
+                version="4.1.2"
+                provider-name="unofficial.addon.pro">
         <extension point="xbmc.addon.repository"
-                name="OpenELEC Add-ons (unofficial)">
-                <dir minversion="15.0.0">
-                    <info>http://unofficial.addon.pro/addons/6.0/@PROJECT@/@ARCH@/addons.xml</info>
-                    <checksum>http://unofficial.addon.pro/addons/6.0/@PROJECT@/@ARCH@/addons.xml.md5</checksum>
-                    <datadir zip="true">http://unofficial.addon.pro/addons/6.0/@PROJECT@/@ARCH@</datadir>
-                </dir>
+                name="Unofficial OpenELEC.tv Add-on Repository">
+                <info>http://unofficial.addon.pro/addons/@ADDON_VERSION@/@PROJECT@/@ARCH@/addons.xml</info>
+                <checksum>http://unofficial.addon.pro/addons/@ADDON_VERSION@/@PROJECT@/@ARCH@/addons.xml.md5</checksum>
+                <datadir zip="true">http://unofficial.addon.pro/addons/@ADDON_VERSION@/@PROJECT@/@ARCH@</datadir>
         </extension>
         <extension point="xbmc.addon.metadata">
-                <summary>OpenELEC Add-ons (unofficial)</summary>
-                <description>The OpenELEC unofficial repository contains add-ons from the community. These add-ons are not supported by OpenELEC staff. If you find a broken add-on please check the OpenELEC or Kodi forums for community support threads and ask the add-on author to submit fixes via GitHub.</description>
-                <disclaimer>Add-ons in this repository are not maintained or supported by OpenELEC staff.</disclaimer>
+                <summary>Unofficial addon repository for OpenELEC</summary>
+                <description>
+[COLOR orange]Use with care. There will be NO end user support for addons in this repository[/COLOR]
+                </description>
+                <disclaimer>This is an unofficial addon repository. please don't ask for support in openelec forum / irc channel</disclaimer>
                 <platform>all</platform>
         </extension>
 </addon>

packages/addons/repository/repository.unofficial.addon.pro/sources/changelog.txt

@@ -1,15 +1,3 @@
-6.0.1
-- update repo minversion for kodi 15
-
-6.0.0
-- rebuild for OpenELEC-6.0
-
-4.3.3
-- rebuild
-
-4.3.2
-- rebuild for addon api bump
-
 4.1.2
 - fix typo in repository name
 

packages/addons/service/multimedia/boblightd/changelog.txt

@@ -1,15 +1,3 @@
-6.0.0
-- rebuild for OpenELEC-6.0
-
-4.3.5
-- added boblight-aml
-
-4.3.4
-- update to kodi
-
-4.3.0
-- rebuild for addon api bump
-
 4.1.2
 - rebuild for xlib changes
 

packages/addons/service/multimedia/boblightd/package.mk

@@ -18,7 +18,7 @@
 
 PKG_NAME="boblightd"
 PKG_VERSION="478"
-PKG_REV="0"
+PKG_REV="2"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://code.google.com/p/boblight"
@@ -31,8 +31,6 @@ PKG_LONGDESC="Boblight's main purpose is to create light effects from an externa
 
 PKG_IS_ADDON="yes"
 PKG_ADDON_TYPE="xbmc.service"
-PKG_ADDON_PROVIDES=""
-PKG_ADDON_REPOVERSION="6.0"
 
 PKG_AUTORECONF="yes"
 
@@ -41,10 +39,10 @@ if [ "$DISPLAYSERVER" = "x11" ] ; then
 fi
 
 if [ "$OPENGL_SUPPORT" = "yes" ] ; then
-  PKG_DEPENDS_TARGET="$PKG_DEPENDS_TARGET mesa glu"
+  PKG_DEPENDS_TARGET="$PKG_DEPENDS_TARGET Mesa glu"
 fi
 
-if [ "$OPENGL" = "no" ]; then
+if [ ! "$OPENGL" = "Mesa" ]; then
   EXTRAOPTS="--without-opengl"
 fi
 
@@ -65,7 +63,6 @@ addon() {
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/bin
   cp -P $PKG_BUILD/.$TARGET_NAME/src/boblightd $ADDON_BUILD/$PKG_ADDON_ID/bin
   cp -P $PKG_BUILD/.$TARGET_NAME/src/boblight-constant $ADDON_BUILD/$PKG_ADDON_ID/bin
-  cp -P $PKG_BUILD/.$TARGET_NAME/src/boblight-aml $ADDON_BUILD/$PKG_ADDON_ID/bin
   if [ "$DISPLAYSERVER" = "x11" ] ; then
     cp -P $PKG_BUILD/.$TARGET_NAME/src/boblight-X11 $ADDON_BUILD/$PKG_ADDON_ID/bin
   fi

packages/addons/service/multimedia/boblightd/patches/boblightd-2.0.5-add_aml_client.patch

@@ -1,632 +0,0 @@
-diff --git a/src/Makefile.am b/src/Makefile.am
-index 9ba5381..c5a4dc6 100644
---- a/src/Makefile.am
-+++ b/src/Makefile.am
-@@ -7,6 +7,7 @@ AM_CFLAGS =\
- 	 -g
- 
- bin_PROGRAMS = boblightd \
-+	boblight-aml \
- 	boblight-constant
-         
- 
-@@ -19,6 +20,11 @@ endif
- 
- endif
- 
-+boblight_aml_SOURCES  = clients/boblight-aml/boblight-aml.cpp
-+boblight_aml_SOURCES += clients/boblight-aml/flagmanager-aml.cpp
-+boblight_aml_SOURCES += clients/flagmanager.cpp
-+boblight_aml_SOURCES += util/misc.cpp
-+
- boblight_v4l_SOURCES = \
- 	clients/boblight-v4l/boblight-v4l.cpp \
- 	clients/boblight-v4l/flagmanager-v4l.cpp \
-diff -urPp src/clients/boblight-aml.cpp src/clients/boblight-aml/boblight-aml.cpp
---- /dev/null	Thu Jan  1 00:00:00 1970
-+++ b/src/clients/boblight-aml/boblight-aml.cpp	Thu Jan 15 10:24:16 2015
-@@ -0,0 +1,491 @@
-+/*
-+ * boblight
-+ * Copyright (C) Bob  2009 
-+ * 
-+ * boblight is free software: you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation, either version 3 of the License, or
-+ * (at your option) any later version.
-+ * 
-+ * boblight is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-+ * See the GNU General Public License for more details.
-+ * 
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#define BOBLIGHT_DLOPEN
-+#include "lib/boblight.h"
-+
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <string.h>
-+#include <unistd.h>
-+#include <signal.h>
-+#include <algorithm>
-+
-+#include <fcntl.h>
-+#include <errno.h>
-+#include <sys/stat.h>
-+#include <sys/poll.h>
-+#include <sys/types.h>
-+#include <sys/time.h>
-+#include <sys/ioctl.h>
-+
-+#include "config.h"
-+#include "util/misc.h"
-+#include "util/timeutils.h"
-+#include "flagmanager-aml.h"
-+
-+using namespace std;
-+
-+//from linux/amlogic/amports/amvideocap.h
-+#define AMVIDEOCAP_IOC_MAGIC 'V'
-+#define AMVIDEOCAP_IOW_SET_WANTFRAME_WIDTH      _IOW(AMVIDEOCAP_IOC_MAGIC, 0x02, int)
-+#define AMVIDEOCAP_IOW_SET_WANTFRAME_HEIGHT     _IOW(AMVIDEOCAP_IOC_MAGIC, 0x03, int)
-+
-+
-+// helper class - tries to load the "movie" settings from the script.xbmc.boblight addon
-+// and pass them to the boblight-aml client
-+class CBoblightAddonSettings
-+{
-+  public:
-+    CBoblightAddonSettings() : m_bobdisable(false), m_settingsLoaded(false)
-+    { 
-+      m_settingsLoaded = loadBoblightAddonSettings();
-+    }
-+
-+    std::string getBoblightClientCmdLine()
-+    {
-+      std::string cmdLine = "";
-+      //convert bool string to lowercase
-+      transform(m_interpolation.begin(), m_interpolation.end(), m_interpolation.begin(), ::tolower);
-+
-+      cmdLine += "-s " + m_ip + ":" + m_port;
-+      cmdLine += " -o autospeed=" + m_autospeed;
-+      cmdLine += " -o interpolation=" + m_interpolation;
-+      cmdLine += " -o saturation=" + m_saturation;
-+      cmdLine += " -o speed=" + m_speed;
-+      cmdLine += " -o threshold=" + m_threshold;
-+      cmdLine += " -o value=" + m_value;
-+      return cmdLine;
-+    }
-+
-+    bool m_bobdisable;
-+    bool m_settingsLoaded;
-+    std::string m_ip;
-+    std::string m_port;
-+    std::string m_autospeed;
-+    std::string m_interpolation;
-+    std::string m_saturation;
-+    std::string m_speed;
-+    std::string m_threshold;
-+    std::string m_value;
-+
-+  private:
-+    #define SETTINGS_ATTR_BOBDISABLE     "bobdisable"
-+    #define SETTINGS_ATTR_IP             "hostip"
-+    #define SETTINGS_ATTR_PORT           "hostport"
-+    #define SETTINGS_ATTR_AUTOSPEED      "movie_autospeed"
-+    #define SETTINGS_ATTR_INTERPOLATION  "movie_interpolation"
-+    #define SETTINGS_ATTR_SATURATION     "movie_saturation"
-+    #define SETTINGS_ATTR_SPEED          "movie_speed"
-+    #define SETTINGS_ATTR_THRESHOLD      "movie_threshold"
-+    #define SETTINGS_ATTR_VALUE          "movie_value"
-+    #define KODI_HOME_ENV_VAR            "HOME"
-+
-+    bool loadBoblightAddonSettings()
-+    {
-+      bool ret = false;
-+      char *kodiHome = getenv(KODI_HOME_ENV_VAR);
-+      //fallback to custom settings file in case boblight addon is not installed
-+      std::string settingsFile = "/storage/boblight-aml.xml";
-+
-+      if (kodiHome != NULL)
-+      {
-+        settingsFile = std::string(kodiHome) + "/.kodi/userdata/addon_data/script.xbmc.boblight/settings.xml";
-+      }
-+
-+      FILE *fd = fopen(settingsFile.c_str(), "r");
-+
-+      if (fd != NULL)
-+      {
-+        fseek(fd, 0, SEEK_END);
-+        size_t fileSize = ftell(fd);
-+        fseek(fd, 0, SEEK_SET);
-+        if (fileSize > 0)
-+        {
-+          if (fileSize > 32000)//read 16k max - there shouldn't be a bigger settings.xml from boblight [tm]
-+            fileSize = 32000;
-+          char *xmlBuffer = new char[fileSize];
-+          size_t readCount = fread(xmlBuffer, fileSize, 1, fd);
-+          fclose(fd);
-+
-+          if (readCount == 1)
-+          {
-+            parseBoblightSettings(std::string(xmlBuffer));
-+            ret = true;
-+          }
-+          else
-+          {
-+            fprintf(stderr, "Failed reading boblight addon settings.xml");
-+          }
-+          delete[] xmlBuffer;
-+        }
-+      }
-+      return ret;
-+    }
-+
-+    void parseBoblightSettings(std::string xmlBuffer)
-+    {
-+      std::string settings_bobdisable_str;
-+      settings_bobdisable_str = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_BOBDISABLE);
-+      if (settings_bobdisable_str == "true" || settings_bobdisable_str == "True")
-+        m_bobdisable = true;
-+
-+      m_ip = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_IP);
-+      m_port = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_PORT);
-+      m_autospeed = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_AUTOSPEED);
-+      m_interpolation = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_INTERPOLATION);
-+      m_saturation = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_SATURATION);
-+      m_speed = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_SPEED);
-+      m_threshold = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_THRESHOLD);
-+      m_value = getValueFromXmlBuffer(xmlBuffer, SETTINGS_ATTR_VALUE);
-+    }
-+
-+    std::string getValueFromXmlBuffer(const std::string &xmlBuffer, const char* xmlAttribute)
-+    {
-+      size_t strPos = 0;
-+      std::string valueStr;
-+
-+      // each line in the xml looks like this:
-+      // <setting id="movie_value" value="1.000006" />
-+      // find the attribute
-+      if ((strPos = xmlBuffer.find(xmlAttribute)) != std::string::npos)
-+      {
-+        size_t strPos2 = 0;
-+        // from movie_value" value="1.000006" /> look for "value"
-+        if ((strPos2 = xmlBuffer.find("value", strPos)) != std::string::npos)
-+        {
-+          size_t strPos3 = 0;
-+          // from value="1.000006" /> look for "="
-+          if ((strPos3 = xmlBuffer.find("=", strPos2)) != std::string::npos)
-+          {
-+            //extract the value - strPos3 points to ="1.000006"
-+            int valueOffset = 1; //skip the "="
-+            if (xmlBuffer[strPos3 + valueOffset] == '"')
-+              valueOffset++;//skip " if needed
-+            int strLen = 0;
-+            do
-+            {
-+              // value stops with " or space
-+              if (xmlBuffer[strPos3 + valueOffset + strLen] == '"' ||
-+                xmlBuffer[strPos3 + valueOffset + strLen] == ' ')
-+                break;
-+              strLen++;
-+            } while (strLen < 20);// no insane xml garbage ...
-+
-+            valueStr = xmlBuffer.substr(strPos3 + valueOffset, strLen);
-+          }
-+        }
-+      }
-+      return valueStr;
-+    }
-+};
-+
-+struct aml_snapshot_t {
-+  unsigned int  dst_width;
-+  unsigned int  dst_height;
-+  unsigned int  dst_stride;
-+  unsigned int  dst_size;
-+  void         *dst_vaddr;
-+};
-+
-+volatile bool g_stop = false;
-+CFlagManagerAML g_flagmanager;
-+/*********************************************************
-+ *********************************************************/
-+static void SignalHandler(int signum)
-+{
-+  if (signum == SIGTERM)
-+  {
-+    fprintf(stderr, "caught SIGTERM\n");
-+    g_stop = true;
-+  }
-+  else if (signum == SIGINT)
-+  {
-+    fprintf(stderr, "caught SIGTERM\n");
-+    g_stop = true;
-+  }
-+}
-+
-+#define VIDEO_PATH       "/dev/amvideo"
-+#define AMSTREAM_IOC_MAGIC  'S'
-+#define AMSTREAM_IOC_GET_VIDEO_DISABLE  _IOR(AMSTREAM_IOC_MAGIC, 0x48, unsigned long)
-+static int amvideo_utils_video_playing()
-+{
-+  int video_fd;
-+  int video_disable;
-+
-+  video_fd = open(VIDEO_PATH, O_RDWR);
-+  if (video_fd < 0) {
-+    return -1;
-+  }
-+
-+  ioctl(video_fd, AMSTREAM_IOC_GET_VIDEO_DISABLE, &video_disable);
-+  if (video_disable)
-+  {
-+    close(video_fd);
-+    return 1;
-+  }
-+
-+  close(video_fd);
-+
-+//  fprintf(stderr, "pos x %d y %d w %d h %d\n",snapshot.src_x, snapshot.src_y,snapshot.src_width,snapshot.src_height);
-+  return 0;
-+}
-+
-+static int capture_frame(int fd, aml_snapshot_t &snapshot)
-+{
-+  int ret = 0;
-+  
-+  ssize_t readResult = pread(fd, snapshot.dst_vaddr, snapshot.dst_size, 0);
-+
-+  if (readResult < snapshot.dst_size)
-+  {
-+    fprintf(stderr, "frame read returned %d\n", readResult);
-+  }
-+  //fprintf(stderr, "requ: %d read %d \n", snapshot.dst_size, readResult);
-+  fprintf(stderr, ".");
-+  return ret;
-+}
-+
-+static int configure_capture(int fd, aml_snapshot_t &snapshot)
-+{
-+  int ret = 0;
-+  int ioctlret = 0;
-+
-+  if ((ioctlret = ioctl(fd, AMVIDEOCAP_IOW_SET_WANTFRAME_WIDTH, snapshot.dst_width)) != 0)
-+  {
-+    ret = 2;
-+    fprintf(stderr, "Error setting frame width (ret: %d errno: %d)\n", ioctlret, errno);
-+  }
-+    
-+  
-+  if ((ioctlret = ioctl(fd, AMVIDEOCAP_IOW_SET_WANTFRAME_HEIGHT, snapshot.dst_height)) != 0)
-+  {
-+    ret = 3;
-+    fprintf(stderr, "Error setting frame height (ret: %d errno: %d)\n", ioctlret, errno);
-+  }
-+
-+  return ret;
-+}
-+
-+static void frameToboblight(void *boblight, uint8_t* outputptr, int w, int h, int stride)
-+{
-+  if (!boblight)
-+  {
-+    fprintf(stderr, "no boblight\n");
-+    return;
-+  }
-+  if (!outputptr)
-+  {
-+    fprintf(stderr, "no outputptr\n");
-+    return;
-+  }
-+  //read out pixels and hand them to libboblight
-+  uint8_t* buffptr;
-+  for (int y = h; y > 0; y--) {
-+    buffptr = outputptr + stride * y;
-+    for (int x = 0; x < w; x++) {
-+      int rgb[3];
-+      rgb[2] = *(buffptr++);
-+      rgb[1] = *(buffptr++);
-+      rgb[0] = *(buffptr++);
-+
-+      //fprintf(stdout, "frameToboblight: x(%d), y(%d)\n", x, y);
-+
-+      boblight_addpixelxy(boblight, x, y, rgb);
-+    }
-+  }
-+}
-+
-+static int Run(void* boblight)
-+{
-+  int snapshot_fd = -1;               
-+  aml_snapshot_t aml_snapshot = {0};
-+  int lastPriority = 255;
-+
-+  aml_snapshot.dst_width  = 160;
-+  aml_snapshot.dst_height = 160;
-+
-+  // calc stride, size and alloc mem
-+  aml_snapshot.dst_stride = aml_snapshot.dst_width  * 3;
-+  aml_snapshot.dst_size   = aml_snapshot.dst_stride * aml_snapshot.dst_height;
-+  aml_snapshot.dst_vaddr  = calloc(aml_snapshot.dst_size, 1);
-+
-+  fprintf(stdout, "Connection to boblightd config: width(%d), height(%d)\n",
-+    aml_snapshot.dst_width, aml_snapshot.dst_height);
-+  //tell libboblight how big our image is
-+  boblight_setscanrange(boblight, (int)aml_snapshot.dst_width, (int)aml_snapshot.dst_height);
-+
-+  while(!g_stop)
-+  {
-+    int64_t bgn = GetTimeUs();
-+
-+    if (snapshot_fd == -1) {
-+      snapshot_fd = open(g_flagmanager.m_device.c_str(), O_RDWR, 0);
-+
-+      if (snapshot_fd == -1) {
-+        sleep(1);
-+        continue;
-+      } else {
-+        fprintf(stdout, "snapshot_fd(%d) \n", snapshot_fd);
-+      }
-+    }
-+
-+    // match source ratio if possible
-+    if (amvideo_utils_video_playing() != 0) {
-+      if ( lastPriority != 255)
-+      {
-+        boblight_setpriority(boblight, 255);
-+        lastPriority = 255;
-+      }
-+      sleep(1);
-+      continue;
-+    }
-+
-+    if (configure_capture(snapshot_fd, aml_snapshot) == 0)
-+    {
-+      if (capture_frame(snapshot_fd, aml_snapshot) == 0)
-+      {
-+        // image to boblight convert.
-+        frameToboblight(boblight, (uint8_t*)aml_snapshot.dst_vaddr,
-+        aml_snapshot.dst_width, aml_snapshot.dst_height, aml_snapshot.dst_stride);
-+  
-+        if (lastPriority != g_flagmanager.m_priority)
-+        {
-+          boblight_setpriority(boblight, g_flagmanager.m_priority);
-+          lastPriority = g_flagmanager.m_priority;
-+        }
-+        if (!boblight_sendrgb(boblight, 1, NULL))
-+        {
-+          // some error happened, probably connection broken, so bitch and try again
-+          PrintError(boblight_geterror(boblight));
-+          boblight_destroy(boblight);
-+          continue;
-+        }
-+      }
-+      else
-+      {
-+        fprintf(stdout, "nap time\n");
-+        sleep(1);
-+      }
-+    }
-+    int64_t end = GetTimeUs();
-+    float calc_time_ms = (float)(end - bgn) / 1000.0;
-+    // throttle to 100ms max cycle rate
-+    calc_time_ms -= 100.0;
-+    if ((int)calc_time_ms < 0)
-+      usleep((int)(-calc_time_ms * 1000));
-+  }
-+
-+  // last image is black
-+  boblight_setpriority(boblight, 255);
-+  boblight_destroy(boblight);
-+  close(snapshot_fd);
-+  return 0;
-+}
-+
-+/*********************************************************
-+ *********************************************************/
-+int main(int argc, char *argv[])
-+{
-+  //load the boblight lib, if it fails we get a char* from dlerror()
-+  const char* boblight_error = boblight_loadlibrary(NULL);
-+  if (boblight_error)
-+  {
-+    PrintError(boblight_error);
-+    return 1;
-+  }
-+
-+  //try to parse the flags and bitch to stderr if there's an error
-+  try {
-+    g_flagmanager.ParseFlags(argc, argv);
-+  }
-+  catch (string error) {
-+    PrintError(error);
-+    g_flagmanager.PrintHelpMessage();
-+    return 1;
-+  }
-+  
-+  if (g_flagmanager.m_printhelp) {
-+    g_flagmanager.PrintHelpMessage();
-+    return 1;
-+  }
-+
-+  if (g_flagmanager.m_printboblightoptions) {
-+    g_flagmanager.PrintBoblightOptions();
-+    return 1;
-+  }
-+  
-+  // check if we only should generate a cmdline based
-+  // on settings from possible found boblight addon
-+  if (g_flagmanager.generateCmdLine)
-+  {
-+    CBoblightAddonSettings settings;
-+    string cmdLine = "-p 100"; //default cmdline just contains priority 100
-+
-+    if (settings.m_settingsLoaded)
-+      cmdLine += " " + settings.getBoblightClientCmdLine();
-+    fprintf(stdout, "%s", cmdLine.c_str());
-+    return 0;//exit
-+  }
-+
-+  fprintf(stderr, "Using device: %s \n", g_flagmanager.m_device.c_str());
-+
-+  //set up signal handlers
-+  signal(SIGINT,  SignalHandler);
-+  signal(SIGTERM, SignalHandler);
-+
-+  //keep running until we want to quit
-+  while(!g_stop) {
-+    //init boblight
-+    void* boblight = boblight_init();
-+
-+    fprintf(stdout, "Connecting to boblightd(%p)\n", boblight);
-+    
-+    //try to connect, if we can't then bitch to stderr and destroy boblight
-+    if (!boblight_connect(boblight, g_flagmanager.m_address, g_flagmanager.m_port, 5000000) ||
-+        !boblight_setpriority(boblight, 255)) {
-+      PrintError(boblight_geterror(boblight));
-+      fprintf(stdout, "Waiting 10 seconds before trying again\n");
-+      boblight_destroy(boblight);
-+      sleep(2);
-+      continue;
-+    }
-+
-+    fprintf(stdout, "Connection to boblightd opened\n");
-+
-+    //try to parse the boblight flags and bitch to stderr if we can't
-+    try {
-+      g_flagmanager.ParseBoblightOptions(boblight);
-+    }
-+    catch (string error) {
-+      PrintError(error);
-+      return 1;
-+    }
-+
-+    try {
-+      Run(boblight);
-+    }
-+    catch (string error) {
-+      PrintError(error);
-+      boblight_destroy(boblight);
-+      return 1;
-+    }
-+  }
-+  fprintf(stdout, "Exiting\n");
-+}
-diff -urPp src/clients/flagmanager-aml.cpp src/clients/boblight-aml/flagmanager-aml.cpp
---- /dev/null	Thu Jan  1 00:00:00 1970
-+++ b/src/clients/boblight-aml/flagmanager-aml.cpp	Thu Jan 15 10:21:40 2015
-@@ -0,0 +1,68 @@
-+/*
-+ * boblight
-+ * Copyright (C) Bob  2009 
-+ * 
-+ * boblight is free software: you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation, either version 3 of the License, or
-+ * (at your option) any later version.
-+ * 
-+ * boblight is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-+ * See the GNU General Public License for more details.
-+ * 
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#include <iostream>
-+
-+#include "flagmanager-aml.h"
-+#include "util/misc.h"
-+#include "config.h"
-+
-+#define DEFAULT_CAPTURE_DEVICE "/dev/amvideocap0"
-+
-+using namespace std;
-+
-+CFlagManagerAML::CFlagManagerAML()
-+{
-+  // extend the flags -d -> device
-+  // -g -> only generate cmdline from possible found boblight addon settings.xml
-+  m_flags += "d:g";
-+  m_device = DEFAULT_CAPTURE_DEVICE;
-+  generateCmdLine = false;
-+}
-+
-+void CFlagManagerAML::ParseFlagsExtended(int& argc, char**& argv, int& c, char*& optarg)
-+{
-+  if (c == 'd') //devicename
-+  {
-+    if (optarg) //optional device
-+    {
-+      m_device = optarg;
-+    }
-+  }
-+  
-+  if (c == 'g') //generate cmdline
-+  {
-+    generateCmdLine = true;
-+  }
-+}
-+
-+void CFlagManagerAML::PrintHelpMessage()
-+{
-+  cout << "Usage: boblight-aml\n";
-+  cout << "\n";
-+  cout << "  options:\n";
-+  cout << "\n";
-+  cout << "  -p  priority, from 0 to 255, default is 128\n";
-+  cout << "  -s  address[:port], set the address and optional port to connect to\n";
-+  cout << "  -o  add libboblight option, syntax: [light:]option=value\n";
-+  cout << "  -l  list libboblight options\n";
-+  cout << "  -f  fork\n";
-+  cout << "  -d  <device> (defaults to " << m_device << ")\n";
-+  cout << "  -g  try to find the settings.xml file from boblight addon and return the cmdline to use its options\n";
-+  cout << "\n";
-+}
-diff -urPp src/clients/flagmanager-aml.h src/clients/boblight-aml/flagmanager-aml.h
---- /dev/null	Thu Jan  1 00:00:00 1970
-+++ b/src/clients/boblight-aml/flagmanager-aml.h	Thu Jan 15 10:20:15 2015
-@@ -0,0 +1,36 @@
-+/*
-+ * boblight
-+ * Copyright (C) Bob  2009 
-+ * 
-+ * boblight is free software: you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License as published by the
-+ * Free Software Foundation, either version 3 of the License, or
-+ * (at your option) any later version.
-+ * 
-+ * boblight is distributed in the hope that it will be useful, but
-+ * WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
-+ * See the GNU General Public License for more details.
-+ * 
-+ * You should have received a copy of the GNU General Public License along
-+ * with this program.  If not, see <http://www.gnu.org/licenses/>.
-+ */
-+
-+#ifndef FLAGMANAGERAML
-+#define FLAGMANAGERAML
-+
-+#include "clients/flagmanager.h"
-+
-+class CFlagManagerAML : public CFlagManager
-+{
-+  public:
-+    CFlagManagerAML();
-+    void ParseFlagsExtended(int& argc, char**& argv, int& c, char*& optarg);
-+
-+    void PrintHelpMessage();
-+    std::string m_device;           //device to open for amvideocap
-+    bool generateCmdLine;
-+
-+};
-+
-+#endif //FLAGMANAGERAML
-\ No newline at end of file

packages/addons/service/multimedia/boblightd/source/bin/boblightd.start

@@ -35,10 +35,4 @@ if [ -x $ADDON_DIR/bin/boblight-X11 -a -e $ADDON_HOME/boblight.X11 ] ; then
   boblight-X11 -f >/dev/null 2>&1
 fi
 
-if [ -x $ADDON_DIR/bin/boblight-aml -a -e /dev/amvideocap0 ] ; then
-  #generates cmdline from boblight addon settings
-  CMDLINE=`boblight-aml -g`
-  boblight-aml $CMDLINE >/dev/null 2>&1 &
-fi
-
 exec boblightd -c $ADDON_HOME/boblight.conf > $ADDON_LOG_FILE 2>&1

packages/addons/service/multimedia/boblightd/source/system.d/service.multimedia.boblightd.service

@@ -3,11 +3,12 @@ Description=boblightd
 After=graphical.target
 
 [Service]
-ExecStart=/bin/sh -c "exec sh /storage/.kodi/addons/service.multimedia.boblightd/bin/boblightd.start"
+ExecStart=/bin/sh -c "exec sh /storage/.xbmc/addons/service.multimedia.boblightd/bin/boblightd.start"
+ExecStopPost=-/bin/sh -c "pidof boblight-X11 && killall -q -9 boblight-X11"
 TimeoutStopSec=1
 Restart=always
 RestartSec=10
 StartLimitInterval=0
 
 [Install]
-WantedBy=kodi.target
+WantedBy=xbmc.target

packages/addons/service/multimedia/tvheadend/changelog.txt

@@ -0,0 +1,157 @@
+4.1.2
+- fix issues with "wait for frontend init". thanks @sraue
+
+4.1.1
+- rebuild to fix curl/gnutls/ssl
+
+4.1.0
+- convert to systemd service
+- rebuild for addon api bump
+
+4.0.1
+- rebuild
+
+4.0.0
+- rebuild for OpenELEC-4.0
+
+3.1.4
+- rebuild
+
+3.1.3
+- update to TVHeadend 3.4.27
+
+3.1.2
+- fix unloading multiple modules on suspend
+
+3.1.1
+- rebuild for OpenELEC-3.2
+
+3.0.11
+- improve suspend/resume
+
+3.0.10
+- fix preloading capmt.so with sundtek
+- added the ability to use a script's stdout as the xmltv source instead of a fixed file or URL
+
+3.0.9
+- update to TVHeadend 3.4
+
+3.0.8
+- update to TVHeadend 3.3.521
+
+3.0.7
+- update to TVHeadend 3.3.511
+
+3.0.6
+- update to TVHeadend 3.3.491
+- disable avahi support
+
+3.0.5
+- update to TVHeadend 3.3.485
+
+3.0.4
+- update to TVHeadend 3.3.403
+
+3.0.3
+- update to TVHeadend 3.3.328
+- add an option to preload capmt_ca.so library
+
+3.0.2
+- update to TVHeadend 3.2.18
+
+3.0.1
+- bump addon version
+- add support to install as system addon
+- update to TVHeadend 3.2, rename addon
+- add version string to addon summary
+
+2.1.5
+- add an option to wait for more than 1 adapters to appear
+
+2.1.3
+- update to hts-tvheadend-78213a0
+
+2.1.2
+- add suspend/resume fixes
+- use KILL signal to stop tvheadend
+- add an option to wait for fe initialization
+
+2.1.1
+- update to addon version 2.1
+- update to hts-tvheadend-85e23bb
+
+2.0.8
+- define default recordings folder to /storage/recordings
+- update to hts-tvheadend-a76f365
+- add patch for support IPTV radio streams
+
+2.0.7
+- enable unloading/loading dvb modules on suspend/resume
+- add while loop for restarting tvheadend if it crashes
+
+2.0.6
+- add possibilty to start / stop addon from addon manager with enable / disable
+- add possibility to browse filesystem for xmltv source file
+- start tvheadend in video user group
+- update to hts-tvheadend-b877800
+
+2.0.5
+- start userspace DVB drivers before Tvheadend
+
+2.0.4
+- update to hts-tvheadend-fdf89b2
+
+2.0.3
+- rebuild for libiconv changes
+
+2.0.2
+- update to hts-tvheadend-d66746c
+
+2.0.1
+- fix patches
+
+2.0.0
+- prepare for OpenELEC-2.0 release
+
+1.90.2
+- depends on xbmc.python API 2.0
+
+1.90.1
+- update to hts-tvheadend-fdc743f
+
+1.90.0
+- add (CH) GA Weissenstein default muxes
+- prepare for OpenELEC-1.90 release
+
+1.0.1
+- add XMLTV tv_file_grab support
+- add XMLTV configuration support
+- add teletext support patch
+- add fix memory leak patch
+
+1.0.0
+- prepare for OpenELEC-1.0 release
+
+0.99.8
+- add suspend/wakeup script
+
+0.99.7
+- update to hts-tvheadend-c88a646
+
+0.99.6
+- update to hts-tvheadend-9d775da
+
+0.99.5
+- update to hts-tvheadend-ca68ed4
+
+0.99.4
+- change icon
+
+0.99.3
+- rebuild for openssl downgrade
+
+0.99.2
+- rework start scripts
+
+0.99.1
+- initial version hts-tvheadend-90e3570

packages/addons/service/multimedia/tvheadend/package.mk

@@ -0,0 +1,66 @@
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+PKG_NAME="tvheadend"
+PKG_VERSION="3.9.1083"
+PKG_REV="2"
+PKG_ARCH="any"
+PKG_LICENSE="GPL"
+PKG_SITE="http://www.lonelycoder.com/hts/tvheadend_overview.html"
+#PKG_URL="https://github.com/downloads/tvheadend/tvheadend/${PKG_NAME}-${PKG_VERSION}.tar.gz"
+PKG_URL="$DISTRO_SRC/${PKG_NAME}-${PKG_VERSION}.tar.gz"
+PKG_DEPENDS_TARGET="toolchain openssl curl"
+PKG_PRIORITY="optional"
+PKG_SECTION="service/multimedia"
+PKG_SHORTDESC="tvheadend (Version: $PKG_VERSION): a TV streaming server for Linux supporting DVB-S, DVB-S2, DVB-C, DVB-T, ATSC, IPTV, and Analog video (V4L) as input sources."
+PKG_LONGDESC="Tvheadend (Version: $PKG_VERSION) is a TV streaming server for Linux supporting DVB-S, DVB-S2, DVB-C, DVB-T, ATSC, IPTV, and Analog video (V4L) as input sources. It also comes with a powerful and easy to use web interface both used for configuration and day-to-day operations, such as searching the EPG and scheduling recordings. Even so, the most notable feature of Tvheadend is how easy it is to set up: Install it, navigate to the web user interface, drill into the TV adapters tab, select your current location and Tvheadend will start scanning channels and present them to you in just a few minutes. If installing as an Addon a reboot is needed"
+PKG_IS_ADDON="yes"
+PKG_ADDON_TYPE="xbmc.service"
+PKG_AUTORECONF="no"
+
+pre_build_target() {
+  mkdir -p $PKG_BUILD/.$TARGET_NAME
+  cp -RP $PKG_BUILD/* $PKG_BUILD/.$TARGET_NAME
+}
+
+configure_target() {
+  ./configure --prefix=/usr \
+            --arch=$TARGET_ARCH \
+            --cpu=$TARGET_CPU \
+            --cc=$TARGET_CC \
+            --enable-timeshift \
+            --disable-libav \
+            --disable-avahi \
+            --python=$ROOT/$TOOLCHAIN/bin/python \
+            --disable-uriparser \
+            --enable-bundle
+}
+
+post_make_target() {
+  $CC -O -fbuiltin -fomit-frame-pointer -fPIC -shared -o capmt_ca.so src/extra/capmt_ca.c -ldl
+}
+
+makeinstall_target() {
+  : # nothing to do here
+}
+
+addon() {
+  mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/bin
+  cp -P $PKG_BUILD/.$TARGET_NAME/build.linux/tvheadend $ADDON_BUILD/$PKG_ADDON_ID/bin
+  cp -P $PKG_BUILD/.$TARGET_NAME/capmt_ca.so $ADDON_BUILD/$PKG_ADDON_ID/bin
+}

packages/addons/service/multimedia/tvheadend/patches/tvheadend-remove-Werror.patch

@@ -0,0 +1,12 @@
+diff -Naur tvheadend-3.9.1050/Makefile tvheadend-3.9.1050.patch/Makefile
+--- tvheadend-3.9.1050/Makefile	2014-07-07 21:39:24.000000000 +0200
++++ tvheadend-3.9.1050.patch/Makefile	2014-07-14 17:57:09.483454814 +0200
+@@ -28,7 +28,7 @@
+ #
+ 
+ CFLAGS  += -g -O2
+-CFLAGS  += -Wall -Werror -Wwrite-strings -Wno-deprecated-declarations
++CFLAGS  += -Wall -Wwrite-strings -Wno-deprecated-declarations
+ CFLAGS  += -Wmissing-prototypes
+ CFLAGS  += -fms-extensions -funsigned-char -fno-strict-aliasing
+ CFLAGS  += -D_FILE_OFFSET_BITS=64

packages/addons/service/multimedia/tvheadend/source/bin/tv_grab_file

@@ -0,0 +1,84 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+. /etc/profile
+
+ADDON_HOME="$HOME/.xbmc/userdata/addon_data/service.multimedia.tvheadend"
+ADDON_SETTINGS="$ADDON_HOME/settings.xml"
+XMLTV_TYPE=`grep XMLTV_TYPE $ADDON_SETTINGS | awk '{print $3 }' | sed -e "s,value=,," -e "s,\",,g"`
+XMLTV_LOCATION_FILE=`grep XMLTV_LOCATION_FILE $ADDON_SETTINGS | awk '{print $3 }' | sed -e "s,value=,," -e "s,\",,g"`
+XMLTV_LOCATION_WEB=`grep XMLTV_LOCATION_WEB $ADDON_SETTINGS | awk '{print $3 }' | sed -e "s,value=,," -e "s,\",,g"`
+XMLTV_LOCATION_SCRIPT=`grep XMLTV_LOCATION_SCRIPT $ADDON_SETTINGS | awk '{print $3 }' | sed -e "s,value=,," -e "s,\",,g"`
+
+dflag=
+vflag=
+cflag=
+
+if [[ $# -lt 1 ]]; then
+  if [ "$XMLTV_TYPE" = "FILE" ]; then
+    cat "$XMLTV_LOCATION_FILE"
+    exit 0
+  elif [ "$XMLTV_TYPE" = "SCRIPT" ]; then
+    if [ -e "$XMLTV_LOCATION_SCRIPT" ] ; then
+      exec "$XMLTV_LOCATION_SCRIPT"
+    fi
+  elif [ "$XMLTV_TYPE" = "WEB" ]; then
+    wget -qO - "$XMLTV_LOCATION_WEB"
+    exit 0
+  fi
+fi
+
+for arg; do
+    delim=""
+    case "$arg" in
+    #translate --gnu-long-options to -g (short options)
+       --description) args="${args}-d ";;
+       --version) args="${args}-v ";;
+       --capabilities) args="${args}-c ";;
+       #pass through anything else
+       *) [[ "${arg:0:1}" == "-" ]] || delim="\""
+           args="${args}${delim}${arg}${delim} ";;
+    esac
+done
+
+#Reset the positional parameters to the short options
+eval set -- $args
+
+while getopts "dvc" option; do
+    case $option in
+        d)  dflag=1;;
+        v)  vflag=1;;
+        c)  cflag=1;;
+        \?) printf "unknown option: -%s\n" $OPTARG
+            printf "Usage: %s: [--description] [--version] [--capabilities] \n" $(basename $0)
+            exit 2
+            ;;
+    esac >&2
+done
+
+if [ "$dflag" ]; then
+   printf "tv_grab_file is a simple grabber that just read the local or web XMLTV formated file\n"
+fi
+if [ "$vflag" ]; then
+   printf "0.1\n"
+fi
+if [ "$cflag" ]; then
+   printf "baseline\n"
+fi

packages/addons/service/multimedia/tvheadend/source/bin/tvheadend.start

@@ -0,0 +1,89 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+. /etc/profile
+
+oe_setup_addon service.multimedia.tvheadend
+
+ADDON_SETTINGS="$ADDON_HOME/settings.xml"
+XMLTV_FILE="$ADDON_DIR/bin/tv_grab_file"
+XMLTV_SETTINGS_DIR="$ADDON_HOME/xmltv"
+XMLTV_SETTINGS_FILE="$XMLTV_SETTINGS_DIR/config"
+DVR_SETTINGS_DIR="$ADDON_HOME/dvr"
+DVR_SETTINGS_FILE="$DVR_SETTINGS_DIR/config"
+DVR_DIR="$HOME/recordings"
+TIMESHIFT_SETTINGS_DIR="$ADDON_HOME/timeshift"
+TIMESHIFT_SETTINGS_FILE="$TIMESHIFT_SETTINGS_DIR/config"
+TIMESHIFT_DIR="$ADDON_HOME/cache/timeshift"
+
+chmod a+x $ADDON_DIR/bin/*
+
+if [ ! -f "$XMLTV_SETTINGS_FILE" ]; then
+  mkdir -p $XMLTV_SETTINGS_DIR
+  if [ -f $ADDON_DIR/xmltv-config ]; then
+    cp $ADDON_DIR/xmltv-config $XMLTV_SETTINGS_FILE
+  fi
+fi
+
+if [ ! -f "$DVR_SETTINGS_FILE" ]; then
+  mkdir -p $DVR_DIR
+  mkdir -p $DVR_SETTINGS_DIR
+  if [ -f $ADDON_DIR/dvr-config ]; then
+    cp $ADDON_DIR/dvr-config $DVR_SETTINGS_FILE
+  fi
+fi
+
+if [ ! -f "$TIMESHIFT_SETTINGS_FILE" ]; then
+  mkdir -p $TIMESHIFT_DIR
+  mkdir -p $TIMESHIFT_SETTINGS_DIR
+  if [ -f $ADDON_DIR/timeshift-config ]; then
+    cp $ADDON_DIR/timeshift-config $TIMESHIFT_SETTINGS_FILE
+  fi
+fi
+
+if [ "$DEBUG" = "yes" ]; then
+  TVHEADEND_ARG="-C -s -u root -g video -c $ADDON_HOME"
+else
+  TVHEADEND_ARG="-C -u root -g video -c $ADDON_HOME"
+fi
+
+# start userspace DVB driver/addon
+for driver_dvb in $(find /storage/.xbmc/addons/driver.dvb.*/bin/userspace-driver.sh -type f 2>/dev/null); do
+  driver_dvb_name=$(echo $driver_dvb | awk 'BEGIN {FS="/"} {printf("%s", $5)}')
+  logger -t Tvheadend "### Loading userspace DVB driver: $driver_dvb_name ###"
+  # use ". " because of variable export
+  . $driver_dvb
+done
+
+if [ "$WAIT_FOR_FEINIT" == "true" ] ; then
+  while [ true ] ; do
+    if [ -e /dev/dvb/adapter$((NUM_ADAPTERS-1))/frontend0 ] ; then
+      break
+    fi
+    sleep 1
+  done
+fi
+
+if [ "$PRELOAD_CAPMT_CA" == "true" ] ; then
+  logger -t Tvheadend "### Preloading capmt_ca.so library ###"
+  LD_PRELOAD="$ADDON_DIR/bin/capmt_ca.so $LD_PRELOAD" exec tvheadend $TVHEADEND_ARG &>$ADDON_LOG_FILE
+else
+  exec tvheadend $TVHEADEND_ARG &>$ADDON_LOG_FILE
+fi

packages/addons/service/multimedia/tvheadend/source/default.py

@@ -15,5 +15,3 @@
 #  You should have received a copy of the GNU General Public License
 #  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
 ################################################################################
-
-d    /run/kodi     0755 root root - -

packages/addons/service/multimedia/tvheadend/source/dvr-config

@@ -0,0 +1,15 @@
+{
+	"storage": "/storage/recordings",
+	"retention-days": 31,
+	"pre-extra-time": 0,
+	"post-extra-time": 0,
+	"day-dir": 0,
+	"channel-dir": 0,
+	"channel-in-title": 0,
+	"date-in-title": 0,
+	"time-in-title": 0,
+	"whitespace-in-title": 0,
+	"title-dir": 0,
+	"episode-in-title": 0,
+	"tag-files": 1
+}

packages/addons/service/multimedia/tvheadend/source/resources/language/English/strings.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="utf-8" standalone="yes"?>
+<strings>
+
+	<!-- HTS TVHEADEND -->
+	<string id="1000">XMLTV</string>
+	<string id="1001">DVB</string>
+	<string id="1011">XMLTV configuration</string>
+	<string id="1011">XMLTV source type</string>
+	<string id="1012">XMLTV File location</string>
+	<string id="1013">XMLTV Web location</string>
+	<string id="1014">XMLTV Script location</string>
+	<string id="1020">DVB Configuration</string>
+	<string id="1021">Unload DVB mudules before suspend</string>
+	<string id="1022">Wait for frontend initialization</string>
+	<string id="1023">Number of adapters to wait for</string>
+	<string id="1024">Preload capmt_ca.so library</string>
+
+</strings>

packages/addons/service/multimedia/tvheadend/source/resources/settings.xml

@@ -0,0 +1,21 @@
+<?xml version="1.0" encoding="utf-8" standalone="yes"?>
+<settings>
+
+   <!-- HTS TVHEADEND -->
+    <category label="1000">
+		<setting label="1010" type="lsep"/>
+		<setting type="sep" />
+		<setting id="XMLTV_TYPE" type="labelenum" label="1011" values="NONE|FILE|SCRIPT|WEB" sort="yes" default="NONE"/>
+		<setting id="XMLTV_LOCATION_FILE" type="file" label="1012" default="" enable="eq(-1,0)"/>
+		<setting id="XMLTV_LOCATION_WEB" type="text" label="1013" default="http://" enable="eq(-2,3)"/>
+		<setting id="XMLTV_LOCATION_SCRIPT" type="file" label="1014" default="" enable="eq(-3,2)"/>
+    </category>
+    <category label="1001">
+		<setting label="1020" type="lsep"/>
+		<setting type="sep" />
+		<setting id="WAIT_FOR_FEINIT" type="bool" label="1022" default="false" />
+		<setting id="NUM_ADAPTERS" type="slider" range="1,16" option="int" label="1023" default="1" enable="eq(-1,true)" />
+		<setting id="REMOVE_MODULES" type="text" label="1021" values="" default=""/>
+		<setting id="PRELOAD_CAPMT_CA" type="bool" label="1024" default="false" />
+    </category>
+</settings>

packages/addons/service/multimedia/tvheadend/source/settings-default.xml

@@ -0,0 +1,8 @@
+<settings>
+    <setting id="WAIT_FOR_FEINIT" value="false" />
+    <setting id="NUM_ADAPTERS" value="1" />
+    <setting id="XMLTV_LOCATION_FILE" value="" />
+    <setting id="XMLTV_LOCATION_WEB" value="http://" />
+    <setting id="XMLTV_TYPE" value="NONE" />
+    <setting id="PRELOAD_CAPMT_CA" value="false" />
+</settings>

packages/addons/service/multimedia/tvheadend/source/sleep.d/tvheadend.power

@@ -0,0 +1,44 @@
+#!/bin/sh
+
+################################################################################
+#      This file is part of OpenELEC - http://www.openelec.tv
+#      Copyright (C) 2009-2014 Stephan Raue (stephan@openelec.tv)
+#
+#  OpenELEC is free software: you can redistribute it and/or modify
+#  it under the terms of the GNU General Public License as published by
+#  the Free Software Foundation, either version 2 of the License, or
+#  (at your option) any later version.
+#
+#  OpenELEC is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#  You should have received a copy of the GNU General Public License
+#  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
+################################################################################
+
+. /etc/profile
+
+oe_setup_addon service.multimedia.tvheadend
+
+SERVICE="service.multimedia.tvheadend"
+
+case "$1" in
+  pre)
+    if systemctl is-active "$SERVICE" &>/dev/null ; then
+      systemctl stop "$SERVICE"
+      for module in $REMOVE_MODULES ; do
+        rmmod $module
+      done
+    fi
+    ;;
+  post)
+    if systemctl is-enabled "$SERVICE" &>/dev/null ; then
+      for module in $REMOVE_MODULES ; do
+        modprobe $module
+      done
+      systemctl start "$SERVICE"
+    fi
+    ;;
+esac

packages/addons/service/multimedia/tvheadend/source/system.d/service.multimedia.tvheadend.service

@@ -0,0 +1,13 @@
+[Unit]
+Description=TVHeadend Service
+After=graphical.target
+
+[Service]
+ExecStart=/bin/sh -c "exec sh /storage/.xbmc/addons/service.multimedia.tvheadend/bin/tvheadend.start"
+TimeoutStopSec=2
+Restart=always
+RestartSec=2
+StartLimitInterval=0
+
+[Install]
+WantedBy=xbmc.target

packages/addons/service/multimedia/tvheadend/source/timeshift-config

@@ -0,0 +1,9 @@
+{
+	"enabled": 0,
+	"ondemand": 0,
+	"path": "/storage/.xbmc/userdata/addon_data/service.multimedia.tvheadend/cache/timeshift",
+	"unlimited_period": 0,
+	"max_period": 3600,
+	"unlimited_size": 0,
+	"max_size": 1024
+}

packages/addons/service/multimedia/tvheadend/source/xmltv-config

@@ -0,0 +1,14 @@
+{
+	"grabbers": [
+		{
+			"path": "/storage/.xbmc/addons/service.multimedia.tvheadend/bin/tv_grab_file",
+			"description": "tv_grag_file is a simple grabber that just read the ~/.xmltv/tv_grab_file.xmltv file",
+			"version": "0.1\n",
+			"mtime": 1318774706,
+			"capabilities": 1
+		}
+	],
+	"grab-interval": 12,
+	"grab-enabled": 1,
+	"current-grabber": "/storage/.xbmc/addons/service.multimedia.tvheadend/bin/tv_grab_file"
+}

packages/addons/service/multimedia/vdr-addon/changelog.txt

@@ -1,70 +1,3 @@
-6.0.2
-- update to vdr-satip-2.2.3
-- update to vdr-plugin-vnsiserver-7c6ff30
-
-6.0.1
-- update to vdr-plugin-dvbapi-0489e01
-- update to vdr-plugin-vnsiserver-a7b0670
-- update to vdr-satip-2.2.2
-- update to vdr-iptv-2.2.1
-
-6.0.0
-- rebuild for OpenELEC-6.0
-- remove plugin 'control'
-- remove plugin 'xvdr'
-- update to vdr-plugin-vnsiserver-36e2b61
-
-4.3.11
-- update to vdr-plugin-restfulapi-0.2.1.4
-
-4.3.10
-- disable dvbapi network mode
-
-4.3.9
-- update to vdr-2.2.0
-- update to vdr-iptv-2.2.0
-- update to vdr-satip-2.2.0
-- update to vdr-plugin-dvbapi-c0c7fa2
-- update to vdr-plugin-eepg-9cd9a75
-- update to vdr-plugin-vnsiserver-9529e6d
-- update to vdr-plugin-streamdev-84c6f6b
-
-4.3.8
-- update to vdr-2.1.10
-- update to vdr-plugin-restfulapi-0.2.1.1
-- update to vdr-plugin-vnsiserver-f2175ba
-
-4.3.7
-- update to vdr-2.1.8
-- update to vdr-plugin-vnsiserver-b887bc8
-- update to vdr-wirbelscan-0.0.9
-
-4.3.6
-- update to vdr-satip-1.0.2
-- update to vdr-2.1.7
-
-4.3.5
-- add plugin 'vdr-plugin-restfulapi'
-- update to vdr-plugin-xvdr-b300fc3
-
-4.3.4
-- update to vdr-plugin-vnsiserver-a48edf1
-- update to vdr-plugin-dvbapi-36a6b1d
-
-4.3.3
-- add plugin 'vdr-plugin-epgfixer'
-- update to vdr-satip-1.0.1
-
-4.3.2
-- update to kodi
-
-4.3.1
-- update to vdr-plugin-vnsiserver-a7cb405
-- update to vdr-plugin-dvbapi-2617a7f
-
-4.3.0
-- rebuild for addon api bump
-
 4.1.7
 - add option to override epg charset
 - update to vdr-plugin-vnsiserver-7d4aa81

packages/addons/service/multimedia/vdr-addon/config.plugins/remote.conf

@@ -0,0 +1,31 @@
+KBD.Up         00000000001B5B41
+KBD.Down       00000000001B5B42
+KBD.Menu       000000000000006D
+KBD.Ok         000000000000000D
+KBD.Back       000000000000007F
+KBD.Left       00000000001B5B44
+KBD.Right      00000000001B5B43
+KBD.Red        000000001B5B5B41
+KBD.Green      000000001B5B5B42
+KBD.Yellow     000000001B5B5B43
+KBD.Blue       000000001B5B5B44
+KBD.0          0000000000000030
+KBD.1          0000000000000031
+KBD.2          0000000000000032
+KBD.3          0000000000000033
+KBD.4          0000000000000034
+KBD.5          0000000000000035
+KBD.6          0000000000000036
+KBD.7          0000000000000037
+KBD.8          0000000000000038
+KBD.9          0000000000000039
+KBD.Info       0000000000000069
+KBD.FastFwd    0000001B5B31377E
+KBD.FastRew    000000001B5B5B45
+KBD.Power      0000000000000070
+KBD.Volume+    0000001B5B32347E
+KBD.Volume-    0000001B5B32337E
+KBD.Mute       0000001B5B32317E
+KBD.User7      0000001B5B31387E
+KBD.User8      0000001B5B31397E
+KBD.User9      0000001B5B32307E

packages/addons/service/multimedia/vdr-addon/package.mk

@@ -18,13 +18,13 @@
 ################################################################################
 
 PKG_NAME="vdr-addon"
-PKG_VERSION="6.0"
-PKG_REV="2"
+PKG_VERSION="4.1"
+PKG_REV="7"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://www.openelec.tv"
 PKG_URL=""
-PKG_DEPENDS_TARGET="toolchain attr libcap vdr vdr-plugin-vnsiserver vdr-iptv vdr-wirbelscan vdr-wirbelscancontrol vdr-plugin-dvbapi vdr-plugin-streamdev vdr-live vdr-epgsearch vdr-plugin-xmltv2vdr vdr-plugin-eepg vdr-dummydevice vdr-satip vdr-plugin-epgfixer vdr-plugin-restfulapi"
+PKG_DEPENDS_TARGET="toolchain attr libcap vdr vdr-plugin-xvdr vdr-plugin-vnsiserver vdr-iptv vdr-wirbelscan vdr-wirbelscancontrol vdr-plugin-dvbapi vdr-plugin-streamdev vdr-live vdr-control vdr-epgsearch vdr-plugin-xmltv2vdr vdr-plugin-eepg vdr-dummydevice vdr-satip"
 PKG_PRIORITY="optional"
 PKG_SECTION="service.multimedia"
 PKG_SHORTDESC="vdr: A powerful DVB TV application"
@@ -32,10 +32,6 @@ PKG_LONGDESC="This project describes how to build your own digital satellite rec
 PKG_AUTORECONF="no"
 PKG_IS_ADDON="yes"
 PKG_ADDON_TYPE="xbmc.service"
-PKG_ADDON_PROVIDES=""
-PKG_ADDON_REQUIRES="pvr.vdr.vnsi:0.0.0 script.config.vdr:0.0.0"
-PKG_ADDON_NAME="VDR PVR Backend"
-PKG_ADDON_REPOVERSION="6.0"
 
 make_target() {
   : # nothing to do here
@@ -48,21 +44,20 @@ makeinstall_target() {
 addon() {
   VDR_DIR="$(get_build_dir vdr)"
   VDR_LIVE_DIR="$(get_build_dir vdr-live)"
+  VDR_PLUGIN_XVDR_DIR="$(get_build_dir vdr-plugin-xvdr)"
   VDR_PLUGIN_VNSISERVER_DIR="$(get_build_dir vdr-plugin-vnsiserver)"
   VDR_PLUGIN_STREAMVEV_DIR="$(get_build_dir vdr-plugin-streamdev)"
   VDR_PLUGIN_XMLTV2VDR="$(get_build_dir vdr-plugin-xmltv2vdr)"
-  VDR_PLUGIN_EPGFIXER_DIR="$(get_build_dir vdr-plugin-epgfixer)"
-  VDR_PLUGIN_RESTFULAPI_DIR="$(get_build_dir vdr-plugin-restfulapi)"
 
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/config
-  touch $ADDON_BUILD/$PKG_ADDON_ID/config/channels.conf
+  cp $VDR_DIR/channels.conf $ADDON_BUILD/$PKG_ADDON_ID/config
   cp $VDR_DIR/diseqc.conf $ADDON_BUILD/$PKG_ADDON_ID/config
   cp $VDR_DIR/keymacros.conf $ADDON_BUILD/$PKG_ADDON_ID/config
   cp $VDR_DIR/scr.conf $ADDON_BUILD/$PKG_ADDON_ID/config
   cp $VDR_DIR/sources.conf $ADDON_BUILD/$PKG_ADDON_ID/config
   cp $VDR_DIR/svdrphosts.conf $ADDON_BUILD/$PKG_ADDON_ID/config
   echo '0.0.0.0/0' >> $ADDON_BUILD/$PKG_ADDON_ID/config/svdrphosts.conf
-
+  cp $PKG_DIR/config.plugins/remote.conf $ADDON_BUILD/$PKG_ADDON_ID/config
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/epgsearch
 
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/res/plugins/live
@@ -74,6 +69,7 @@ addon() {
   cp $VDR_PLUGIN_XMLTV2VDR/dist/epgdata2xmltv/epgdata2xmltv.dist $ADDON_BUILD/$PKG_ADDON_ID/config/epgsources/epgdata2xmltv
 
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/plugin
+  cp -PR $VDR_PLUGIN_XVDR_DIR/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $VDR_PLUGIN_VNSISERVER_DIR/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $(get_build_dir vdr-iptv)/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $(get_build_dir vdr-wirbelscan)/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
@@ -83,15 +79,18 @@ addon() {
   cp -PR $VDR_PLUGIN_STREAMVEV_DIR/server/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $VDR_PLUGIN_STREAMVEV_DIR/client/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $VDR_LIVE_DIR/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
+  cp -PR $(get_build_dir vdr-control)/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $(get_build_dir vdr-epgsearch)/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $VDR_PLUGIN_XMLTV2VDR/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $(get_build_dir vdr-dummydevice)/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
   cp -PR $(get_build_dir vdr-satip)/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
-  cp -PR $VDR_PLUGIN_EPGFIXER_DIR/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
-  cp -PR $VDR_PLUGIN_RESTFULAPI_DIR/libvdr*.so.* $ADDON_BUILD/$PKG_ADDON_ID/plugin
 
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/eepg
 
+  mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/xvdr
+  cp -PR $VDR_PLUGIN_XVDR_DIR/xvdr/allowed_hosts.conf $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/xvdr
+  cp -PR $VDR_PLUGIN_XVDR_DIR/xvdr/xvdr.conf $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/xvdr
+
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/vnsiserver
   cp -PR $VDR_PLUGIN_VNSISERVER_DIR/vnsiserver/allowed_hosts.conf $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/vnsiserver
 
@@ -100,15 +99,8 @@ addon() {
   cp -P $VDR_PLUGIN_XMLTV2VDR/dist/epgdata2xmltv/epgdata2xmltv $ADDON_BUILD/$PKG_ADDON_ID/bin
 
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/lib
-  cp -PL $(get_build_dir tntnet)/.install_pkg/usr/lib/libtntnet.so.12 $ADDON_BUILD/$PKG_ADDON_ID/lib
+  cp -PL $(get_build_dir tntnet)/.install_pkg/usr/lib/libtntnet.so.11 $ADDON_BUILD/$PKG_ADDON_ID/lib
 
   mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/streamdev-server
   cp -PR $VDR_PLUGIN_STREAMVEV_DIR/streamdev-server/streamdevhosts.conf $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/streamdev-server
-
-  mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/epgfixer
-  cp -PR $VDR_PLUGIN_EPGFIXER_DIR/epgfixer/*.conf $ADDON_BUILD/$PKG_ADDON_ID/config/plugins/epgfixer
-
-  mkdir -p $ADDON_BUILD/$PKG_ADDON_ID/res/plugins/restfulapi
-  cp -P $VDR_PLUGIN_RESTFULAPI_DIR/web/* $ADDON_BUILD/$PKG_ADDON_ID/res/plugins/restfulapi
-  cp -P $VDR_PLUGIN_RESTFULAPI_DIR/API.html $ADDON_BUILD/$PKG_ADDON_ID/res/plugins/restfulapi
 }

packages/addons/service/multimedia/vdr-addon/source/bin/vdr.start

@@ -45,7 +45,9 @@ ADDON_PLUGIN_DIR="$ADDON_DIR/plugin"
 chmod a+x $ADDON_DIR/bin/*
 
 ADDON_CACHE_DIR="$ADDON_HOME/cache"
-mkdir -p $ADDON_CACHE_DIR
+if [ ! -f "$ADDON_CACHE_DIR" ]; then
+  mkdir -p $ADDON_CACHE_DIR
+fi
 
 VDR_ARG="-g /tmp --no-kbd"
 if [ "$DEBUG" = "yes" ]; then
@@ -97,12 +99,12 @@ fi
 if [ "$ENABLE_LIVE" == "true" ] ; then
   VDR_ARG="$VDR_ARG -P 'live -i $LIVE_IP -p $LIVE_PORT'"
 fi
+if [ "$ENABLE_CONTROL" == "true" ] ; then
+  VDR_ARG="$VDR_ARG -P 'control -p $CONTROL_PORT'"
+fi
 if [ "$ENABLE_EEPG" == "true" ] ; then
   VDR_ARG="$VDR_ARG -P eepg"
 fi
-if [ "$ENABLE_EPGFIXER" == "true" ] ; then
-  VDR_ARG="$VDR_ARG -P epgfixer"
-fi
 if [ "$ENABLE_EPGSEARCH" == "true" ] ; then
   VDR_ARG="$VDR_ARG -P epgsearch"
 fi
@@ -128,21 +130,8 @@ if [ "$ENABLE_XMLTV2VDR" == "true" ] ; then
     cp $source /var/lib/epgsources
   done
 fi
-
-if [ ! -d "$ADDON_HOME/epgimages" ]; then
-  mkdir -p "$ADDON_HOME/epgimages"
-fi
-if [ ! -z "$ADDON_HOME/channellogos" ]; then
-  mkdir -p "$ADDON_HOME/channellogos"
-fi
-
-RESTFULAPI_ARGS="--ip $RESTFULAPI_IP --port $RESTFULAPI_PORT"
-RESTFULAPI_ARGS="$RESTFULAPI_ARGS --epgimages=\"$ADDON_HOME/epgimages\""
-RESTFULAPI_ARGS="$RESTFULAPI_ARGS --channellogos=\"$ADDON_HOME/channellogos\""
-VDR_ARG="$VDR_ARG -P 'restfulapi $RESTFULAPI_ARGS'"
-
-# vnsi last
-VDR_ARG="$VDR_ARG -P vnsiserver"
+# vnsi/xvdr last
+VDR_ARG="$VDR_ARG -P $PVR_PLUGIN"
 
 cd $ADDON_DIR/config
 mkdir -p $ADDON_CONFIG_DIR
@@ -159,7 +148,7 @@ for config in `find . -type f`; do
 done
 
 # start userspace DVB driver/addon
-for driver_dvb in $(find /storage/.kodi/addons/driver.dvb.*/bin/userspace-driver.sh -type f 2>/dev/null); do
+for driver_dvb in $(find /storage/.xbmc/addons/driver.dvb.*/bin/userspace-driver.sh -type f 2>/dev/null); do
   driver_dvb_name=$(echo $driver_dvb | awk 'BEGIN {FS="/"} {printf("%s", $5)}')
   logger -t VDR "### Loading userspace DVB driver: $driver_dvb_name ###"
   # use ". " because of variable export

packages/addons/service/multimedia/vdr-addon/source/resources/language/English/strings.xml

@@ -4,7 +4,7 @@
 	<string id="1001">Plugins</string>
 	<string id="1002">VDR</string>
 	<string id="1020">DVB Configuration</string>
-	<string id="1021">Unload DVB modules before suspend</string>
+	<string id="1021">Unload DVB mudules before suspend</string>
 	<string id="1022">Wait for frontend initialization</string>
 	<string id="1023">Number of adapters to wait for</string>
 	<string id="1024">Enable charset override</string>
@@ -17,18 +17,17 @@
 	<string id="1038">Enable plugin: live</string>
 	<string id="1039">- listen on ip</string>
 	<string id="1040">- listen on port</string>
+	<string id="1042">Enable plugin: control</string>
+	<string id="1043">- listen on port</string>
 	<string id="1044">Enable plugin: epgsearch</string>
 	<string id="1045">Enable plugin: xmltv2vdr</string>
 	<string id="1046">Enable plugin: extended EPG</string>
 	<string id="1047">Enable plugin: dummydevice</string>
 	<string id="1048">Enable plugin: satip</string>
-	<string id="1049">Enable plugin: epgfixer</string>
 	<string id="1051">VDR Configuration</string>
 	<string id="1052">VDR Video Dir</string>
+	<string id="1053">PVR plugin</string>
         <string id="1056">Enable external recdmd</string>
         <string id="1057">External recdmd path</string>
         <string id="1058">- number of devices</string>
-	<string id="1070">restfulapi plugin options</string>
-	<string id="1071">- listen on ip</string>
-	<string id="1072">- listen on port</string>
 </strings>

packages/addons/service/multimedia/vdr-addon/source/resources/settings.xml

@@ -20,6 +20,7 @@
     <category label="1001">
 		<setting label="1030" type="lsep"/>
 		<setting type="sep" />
+		<setting id="PVR_PLUGIN" type="labelenum" label="1053" values="xvdr|vnsiserver" default="vnsiserver" />
 		<setting id="ENABLE_IPTV" type="bool" label="1031" default="false" />
 		<setting id="IPTV_NUM_DEVICES" type="slider" option="int" range="1,4" label="1058" visible="!eq(-1,false)" default="1" />
 		<setting id="ENABLE_STREAMDEV_CLIENT" type="bool" label="1032" default="false" />
@@ -27,16 +28,14 @@
 		<setting id="ENABLE_LIVE" type="bool" label="1038" default="false" />
 		<setting id="LIVE_IP" type="ipaddress" label="1039" values="" visible="!eq(-1,false)" default="0.0.0.0"/>
 		<setting id="LIVE_PORT" type="number" label="1040" values="" visible="!eq(-2,false)"  default="8008"/>
+		<setting id="ENABLE_CONTROL" type="bool" label="1042" default="false" />
+		<setting id="CONTROL_PORT" type="number" label="1043" values="" visible="!eq(-1,false)"  default="2002"/>
 		<setting id="ENABLE_EEPG" type="bool" label="1046" default="false" />
 		<setting id="ENABLE_EPGSEARCH" type="bool" label="1044" default="false" />
 		<setting id="ENABLE_XMLTV2VDR" type="bool" label="1045" default="false" />
 		<setting id="ENABLE_DUMMYDEVICE" type="bool" label="1047" default="false" />
 		<setting id="ENABLE_SATIP" type="bool" label="1048" default="false" />
-		<setting id="ENABLE_EPGFIXER" type="bool" label="1049" default="false" />
 		<setting type="sep" />
 		<setting id="ENABLE_SOFTCAM" type="bool" label="1036" default="true" />
-		<setting type="lsep" label="1070" />
-		<setting id="RESTFULAPI_IP" type="ipaddress" label="1071" values="" default="127.0.0.1"/>
-		<setting id="RESTFULAPI_PORT" type="number" label="1072" values="" default="8002"/>
     </category>
 </settings>

packages/addons/service/multimedia/vdr-addon/source/settings-default.xml

@@ -3,6 +3,7 @@
     <setting id="NUM_ADAPTERS" value="1" />
     <setting id="REMOVE_MODULES" value="" />
     <setting id="VDR_VIDEO_DIR" value="/storage/videos" />
+    <setting id="PVR_PLUGIN" value="vnsiserver" />
     <setting id="ENABLE_IPTV" value="false" />
     <setting id="ENABLE_SOFTCAM" value="true" />
     <setting id="ENABLE_STREAMDEV_CLIENT" value="false" />
@@ -10,8 +11,9 @@
     <setting id="ENABLE_LIVE" value="false" />
     <setting id="LIVE_IP" value="0.0.0.0" />
     <setting id="LIVE_PORT" value="8008" />
+    <setting id="ENABLE_CONTROL" value="false" />
+    <setting id="CONTROL_PORT" value="2002" />
     <setting id="ENABLE_EEPG" value="false" />
-    <setting id="ENABLE_EPGFIXER" value="false" />
     <setting id="ENABLE_EPGSEARCH" value="false" />
     <setting id="ENABLE_XMLTV2VDR" value="false" />
     <setting id="ENABLE_DUMMYDEVICE" value="false" />
@@ -21,6 +23,4 @@
     <setting id="ENABLE_CHARSET_OVERRIDE" value="false" />
     <setting id="CHARSET_OVERRIDE_STR" value="" />
     <setting id="IPTV_NUM_DEVICES" value="1" />
-    <setting id="RESTFULAPI_IP" value="127.0.0.1" />
-    <setting id="RESTFULAPI_PORT" value="8002" />
 </settings>

packages/addons/service/multimedia/vdr-addon/source/system.d/service.multimedia.vdr-addon.service

@@ -3,11 +3,11 @@ Description=vdr
 After=graphical.target
 
 [Service]
-ExecStart=/bin/sh -c "exec sh /storage/.kodi/addons/service.multimedia.vdr-addon/bin/vdr.start"
+ExecStart=/bin/sh -c "exec sh /storage/.xbmc/addons/service.multimedia.vdr-addon/bin/vdr.start"
 TimeoutStopSec=2
 Restart=always
 RestartSec=2
 StartLimitInterval=0
 
 [Install]
-WantedBy=kodi.target
+WantedBy=xbmc.target

packages/audio/alsa-lib/package.mk

@@ -17,7 +17,7 @@
 ################################################################################
 
 PKG_NAME="alsa-lib"
-PKG_VERSION="1.0.29"
+PKG_VERSION="1.0.28"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
@@ -58,6 +58,8 @@ post_configure_target() {
 post_makeinstall_target() {
   rm -rf $INSTALL/usr/bin
 
+  mkdir -p $INSTALL/etc/modprobe.d
+    cp -PR $PKG_DIR/config/alsa-base.conf $INSTALL/etc/modprobe.d
   mkdir -p $INSTALL/usr/config
     cp -PR $PKG_DIR/config/modprobe.d $INSTALL/usr/config
 }

packages/audio/alsa-lib/patches/alsa-lib-USB_Soundblaster_HD.patch

@@ -1,23 +0,0 @@
-From 982c628f484266c8db4f70dc1e856bc7844c1873 Mon Sep 17 00:00:00 2001
-From: Patrick Rasmussen <patrickrasmussen1988@gmail.com>
-Date: Fri, 13 Mar 2015 14:52:56 +0100
-Subject: [PATCH] Add USB Sound Blaster HD
-
----
- src/conf/cards/USB-Audio.conf | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/src/conf/cards/USB-Audio.conf b/src/conf/cards/USB-Audio.conf
-index 4cbf85e..2591d00 100644
---- a/src/conf/cards/USB-Audio.conf
-+++ b/src/conf/cards/USB-Audio.conf
-@@ -62,6 +62,7 @@ USB-Audio.pcm.iec958_device {
- # Second iec958 device number, if any.
- USB-Audio.pcm.iec958_2_device {
- 	"PHIREE U2" 1  # 0 = PCM S/PDIF, 1 = non-PCM S/PDIF
-+	"USB Sound Blaster HD" 1
- }
- 
- 
--- 
-2.1.4

packages/audio/alsa-utils/package.mk

@@ -17,7 +17,7 @@
 ################################################################################
 
 PKG_NAME="alsa-utils"
-PKG_VERSION="1.0.29"
+PKG_VERSION="1.0.28"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"

packages/audio/alsa-utils/scripts/soundconfig

@@ -126,10 +126,8 @@ else
 
 # and this for various Fusion devices like Zotac ZBOX
   mixer $card 'Front',0 100% on
-
-# NVidia CK804 sound devices
-  mixer $card 'IEC958 Playback AC97-SPSA' 100%
 fi
 
 exit 0
 )&
+

packages/audio/espeak/package.mk

@@ -22,7 +22,7 @@ PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
 PKG_SITE="http://espeak.sourceforge.net/"
-PKG_URL="$DISTRO_SRC/$PKG_NAME-$PKG_VERSION.zip"
+PKG_URL="http://downloads.sourceforge.net/$PKG_NAME/$PKG_NAME-$PKG_VERSION.zip"
 PKG_SOURCE_DIR="$PKG_NAME/$PKG_NAME-$PKG_VERSION"
 PKG_DEPENDS_TARGET="toolchain"
 PKG_PRIORITY="optional"

packages/audio/faad2/package.mk

@@ -16,32 +16,28 @@
 #  along with OpenELEC.  If not, see <http://www.gnu.org/licenses/>.
 ################################################################################
 
-PKG_NAME="dcadec"
-PKG_VERSION="37d8e68"
+PKG_NAME="faad2"
+PKG_VERSION="2.7"
 PKG_REV="1"
 PKG_ARCH="any"
 PKG_LICENSE="GPL"
-PKG_SITE="https://github.com/foo86/dcadec"
-PKG_URL="$DISTRO_SRC/$PKG_NAME-$PKG_VERSION.tar.xz"
+PKG_SITE="http://www.audiocoding.com/"
+PKG_URL="$SOURCEFORGE_SRC/faac/faad2-src/$PKG_NAME-$PKG_VERSION/$PKG_NAME-$PKG_VERSION.tar.gz"
 PKG_DEPENDS_TARGET="toolchain"
 PKG_PRIORITY="optional"
 PKG_SECTION="audio"
-PKG_SHORTDESC="DTS Coherent Acoustics decoder with support for HD extensions"
-PKG_LONGDESC="DTS Coherent Acoustics decoder with support for HD extensions"
+PKG_SHORTDESC="faad: An MPEG-4 AAC decoder"
+PKG_LONGDESC="The FAAD project includes the AAC decoder FAAD2. It supports several MPEG-4 object types (LC, Main, LTP, HE AAC, PS) and file formats (ADTS AAC, raw AAC, MP4), multichannel and gapless decoding as well as MP4 metadata tags. The codecs are compatible with standard-compliant audio applications using one or more of these profiles."
 
 PKG_IS_ADDON="no"
-PKG_AUTORECONF="no"
+PKG_AUTORECONF="yes"
 
-# todo: we need to build as shared library, otherwise sond dont work
-# in kodi with enabled dcadec support and we have 100% CPU usage
-# (to test disable passtrough and use a DTS-HD sample)
-PKG_MAKE_OPTS_TARGET="PREFIX=/usr BINDIR=/usr/bin LIBDIR=/usr/lib INCLUDEDIR=/usr/include PKG_CONFIG_PATH=/usr/lib/pkgconfig CONFIG_SHARED=1"
-PKG_MAKEINSTALL_OPTS_TARGET="$PKG_MAKE_OPTS_TARGET"
+# package specific configure options
+PKG_CONFIGURE_OPTS_TARGET="--without-xmms \
+                           --without-drm \
+                           --without-mpeg4ip \
+                           --with-gnu-ld"
 
-pre_configure_target() {
-  export CFLAGS="$CFLAGS -fPIC -DPIC"
-  export LDFLAGS="$LDFLAGS -fPIC -DPIC"
-}
 
 post_makeinstall_target() {
   rm -rf $INSTALL/usr/bin