Files
build/patch/u-boot/v2023.01/board_rockpro64/mmc-sdhci-allow-disabling-sdma-in-spl.patch
Ricardo Pardini d6c1414d2f u-boot: rewrite/rebase u-boot patches for a few boards; drop long-forgotten old version patches; no actual changes
- I guess this is most of the u-boot's I've touched over the years; notable exception is the orangepi3b (patches live in Kwiboo's tree)
- this is in preparation for bumping versions, hopefully soon
- radxa-zero, radxa-zero2, khadas-vim3, khadas-vim3l: drop patches for old u-boot versions no longer used
2024-03-09 20:03:29 +01:00

70 lines
2.5 KiB
Diff

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Peter Geis <pgwipeout@gmail.com>
Date: Mon, 21 Feb 2022 20:31:21 -0500
Subject: mmc: sdhci: allow disabling sdma in spl
Rockchip emmc devices have a similar issue to Rockchip dwmmc devices,
where performing dma to sram causes errors with suspend/resume.
Allow us to toggle sdma in spl for sdhci similar to adma support, so we
can ensure dma is not used when loading the sram code.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
---
drivers/mmc/Kconfig | 7 +++++++
drivers/mmc/sdhci.c | 6 +++---
2 files changed, 10 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index bf4d994ff695..6a959db956f4 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -471,6 +471,13 @@ config MMC_SDHCI_SDMA
This enables support for the SDMA (Single Operation DMA) defined
in the SD Host Controller Standard Specification Version 1.00 .
+config SPL_MMC_SDHCI_SDMA
+ bool "Support SDHCI SDMA in SPL"
+ depends on MMC_SDHCI
+ help
+ This enables support for the SDMA (Single Operation DMA) defined
+ in the SD Host Controller Standard Specification Version 1.00 in SPL.
+
config MMC_SDHCI_ADMA
bool "Support SDHCI ADMA2"
depends on MMC_SDHCI
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index a80ad8329a38..3c44e5d8d4d2 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -70,7 +70,7 @@ static void sdhci_transfer_pio(struct sdhci_host *host, struct mmc_data *data)
}
}
-#if (defined(CONFIG_MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA))
+#if (CONFIG_IS_ENABLED(MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA))
static void sdhci_prepare_dma(struct sdhci_host *host, struct mmc_data *data,
int *is_aligned, int trans_bytes)
{
@@ -177,7 +177,7 @@ static int sdhci_transfer_data(struct sdhci_host *host, struct mmc_data *data)
}
} while (!(stat & SDHCI_INT_DATA_END));
-#if (defined(CONFIG_MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA))
+#if (CONFIG_IS_ENABLED(MMC_SDHCI_SDMA) || CONFIG_IS_ENABLED(MMC_SDHCI_ADMA))
dma_unmap_single(host->start_addr, data->blocks * data->blocksize,
mmc_get_dma_dir(data));
#endif
@@ -856,7 +856,7 @@ int sdhci_setup_cfg(struct mmc_config *cfg, struct sdhci_host *host,
#endif
debug("%s, caps: 0x%x\n", __func__, caps);
-#ifdef CONFIG_MMC_SDHCI_SDMA
+#if CONFIG_IS_ENABLED(MMC_SDHCI_SDMA)
if ((caps & SDHCI_CAN_DO_SDMA)) {
host->flags |= USE_SDMA;
} else {
--
Armbian