mirror of
https://github.com/armbian/build
synced 2025-09-24 19:47:06 +07:00
89a16b82f5
- as Armbian u-boot is possibly deployed to SPI (replacing Petitboot),
try to make as compatible as possible; eg enable squashfs support
- in this case, `setexpr` and `fileenv` are used by HAOS
- found `fileenv` here 049e1a1949
Signed-off-by: Ricardo Pardini <ricardo@pardini.net>
155 lines
8.8 KiB
Plaintext
155 lines
8.8 KiB
Plaintext
# Rockchip RK3568 quad core 4GB-8GB GBE PCIe USB3 SATA NVMe
|
|
BOARD_NAME="Odroid M1"
|
|
BOARDFAMILY="rockchip64"
|
|
BOARD_MAINTAINER="rpardini"
|
|
BOOT_SOC="rk3568"
|
|
KERNEL_TARGET="current,edge"
|
|
KERNEL_TEST_TARGET="current"
|
|
BOOT_FDT_FILE="rockchip/rk3568-odroid-m1.dtb"
|
|
SRC_EXTLINUX="no"
|
|
ASOUND_STATE="asound.state.station-m2"
|
|
IMAGE_PARTITION_TABLE="gpt"
|
|
FULL_DESKTOP="yes"
|
|
BOOT_LOGO="desktop"
|
|
|
|
BOOTBRANCH_BOARD="tag:v2025.01"
|
|
BOOTPATCHDIR="v2025.01" # but all changes are done in this board file, not patches
|
|
|
|
BOOTCONFIG="odroid-m1-rk3568_defconfig"
|
|
BOOTDIR="u-boot-${BOARD}" # do not share u-boot directory
|
|
|
|
# The overlays for this board are prefixed by 'rockchip-rk3568-hk' (see for example patch/kernel/archive/rockchip64-6.6/overlay/rockchip-rk3568-hk-i2c0.dts)
|
|
OVERLAY_PREFIX="rockchip-rk3568-hk"
|
|
|
|
function post_family_config__uboot_config() {
|
|
display_alert "$BOARD" "u-boot ${BOOTBRANCH_BOARD} overrides" "info"
|
|
BOOTDELAY=1 # Wait for UART interrupt to enter UMS/RockUSB mode etc
|
|
UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/$BL31_BLOB ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin u-boot-rockchip-spi.bin u-boot.itb idbloader.img idbloader-spi.img"
|
|
unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # disable stuff from rockchip64_common; we're using binman here which does all the work already
|
|
|
|
# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
|
|
function write_uboot_platform() {
|
|
dd if=${1}/u-boot-rockchip.bin of=${2} bs=32k seek=1 conv=fsync
|
|
}
|
|
|
|
# We don't use u-boot-rockchip-spi.bin here; instead, write SPL and u-boot individually
|
|
# If we're deinfesting from Petitboot, clear the environment too; PREBOOT will save a new one for mainline
|
|
function write_uboot_platform_mtd() {
|
|
declare -a extra_opts_flashcp=("--verbose")
|
|
# -p is: "read the flash and only write blocks that are actually different"
|
|
# if on bullseye et al, flashcp/mtd-utils is old, and doesn't have --partition/-p
|
|
if flashcp -h | grep -q -e '--partition'; then
|
|
echo "Confirmed flashcp supports --partition -- read and write only changed blocks." >&2
|
|
extra_opts_flashcp+=("--partition")
|
|
else
|
|
echo "flashcp does not support --partition, will write full SPI flash blocks." >&2
|
|
fi
|
|
flashcp "${extra_opts_flashcp[@]}" "${1}/idbloader-spi.img" /dev/mtd0 # write SPL
|
|
flashcp "${extra_opts_flashcp[@]}" "${1}/u-boot.itb" /dev/mtd2 # write u-boot
|
|
if fw_printenv | grep -q -i petitboot; then # Petitboot leaves a horrible env behind, clear it off if so
|
|
echo "Found traces of Petitboot in SPI u-boot environment, clearing SPI environment..." >&2
|
|
flash_erase /dev/mtd1 0 0 # clear u-boot env
|
|
fi
|
|
}
|
|
}
|
|
|
|
# Include fw_setenv, configured to point to Petitboot's u-env mtd partition
|
|
PACKAGE_LIST_BOARD="libubootenv-tool" # libubootenv-tool provides fw_printenv and fw_setenv, for talking to U-Boot environment
|
|
|
|
function post_family_tweaks__config_odroidm1_fwenv() {
|
|
display_alert "Configuring fw_printenv and fw_setenv" "for Odroid M1" "info"
|
|
# Addresses below come from
|
|
# - (we use mainline, not vendor, so this is only for reference)
|
|
# https://github.com/hardkernel/u-boot/blob/356906e6445378a45ac14ec184fc6e666b22338a/configs/odroid_rk3568_defconfig#L212-L213
|
|
# The kernel DT has a convenient partition table, so mtd1 is ready to use, just gotta set the size.
|
|
# https://github.com/torvalds/linux/blob/master/arch/arm64/boot/dts/rockchip/rk3568-odroid-m1.dts#L637-L662
|
|
# HK's SPI partition on MTD:
|
|
# mtd0: start 0 size 917.504 end 917.504 : SPL == start 0x0 size 0xe0000 : SPL
|
|
# mtd1: start 917.504 size 131.072 end 1.048.576 : U-Boot Env == start 0xe0000 size 0x20000 : U-Boot Env
|
|
# mtd2: start 1.048.576 size 2.097.152 end 3.145.728 : U-Boot == start 0x100000 size 0x200000 : U-Boot
|
|
|
|
cat <<- 'FW_ENV_CONFIG' > "${SDCARD}"/etc/fw_env.config
|
|
# MTD on the SPI for the Odroid-M1; this requires the MTD partition table in the board kernel DTS
|
|
# MTD device name Device offset Env. size Flash sector size Number of sectors
|
|
/dev/mtd1 0x0000 0x20000
|
|
FW_ENV_CONFIG
|
|
}
|
|
|
|
# add a network rule to rename default name
|
|
function post_family_tweaks__odroidm1_rename_gmac_eth0() {
|
|
display_alert "Creating network rename rule for Odroid M1"
|
|
mkdir -p "${SDCARD}"/etc/udev/rules.d/
|
|
cat <<- EOF > "${SDCARD}"/etc/udev/rules.d/70-rename-lan.rules
|
|
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", KERNEL=="end*", NAME="eth0"
|
|
EOF
|
|
|
|
}
|
|
|
|
function pre_config_uboot_target__odroidm1_patch_uboot_dtsi_for_ums() {
|
|
display_alert "u-boot for ${BOARD}" "u-boot: add to u-boot dtsi for UMS" "info" # avoid a patch, just append to the dtsi file
|
|
cat <<- UBOOT_BOARD_DTSI_OTG >> arch/arm/dts/rk3568-odroid-m1-u-boot.dtsi
|
|
&usb_host0_xhci { dr_mode = "otg"; };
|
|
UBOOT_BOARD_DTSI_OTG
|
|
}
|
|
|
|
# "rockchip-common: boot SD card first, then NVMe, then SATA, then USB, then mmc"
|
|
# On odroidm1, mmc0 is the eMMC, mmc1 is the SD card slot
|
|
function pre_config_uboot_target__odroidm1_patch_rockchip_common_boot_order() {
|
|
declare -a rockchip_uboot_targets=("mmc1" "nvme" "scsi" "usb" "mmc0" "pxe" "dhcp" "spi") # for future make-this-generic delight
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: adjust boot order to '${rockchip_uboot_targets[*]}'" "info"
|
|
sed -i -e "s/#define BOOT_TARGETS.*/#define BOOT_TARGETS \"${rockchip_uboot_targets[*]}\"/" include/configs/rockchip-common.h
|
|
regular_git diff -u include/configs/rockchip-common.h || true
|
|
}
|
|
|
|
# A better equivalent to patching a defconfig, do changes to .config via code.
|
|
# For UMS/RockUSB to work in u-boot, &usb_host0_xhci { dr_mode = "otg" } is required. See 0002-board-rockchip-ODROID-M1-override-kernel-DT-for-xhci-otg-dr_mode.patch
|
|
function post_config_uboot_target__extra_configs_for_odroid-m1() {
|
|
[[ "${BRANCH}" == "edge" || "${BRANCH}" == "current" ]] || return 0
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: store ENV in SPI, matching Petitboot size/offset" "info"
|
|
run_host_command_logged scripts/config --set-val CONFIG_ENV_IS_NOWHERE "n"
|
|
run_host_command_logged scripts/config --set-val CONFIG_ENV_IS_IN_SPI_FLASH "y"
|
|
run_host_command_logged scripts/config --set-val CONFIG_ENV_SIZE "0x20000"
|
|
run_host_command_logged scripts/config --set-val CONFIG_ENV_OFFSET "0xe0000"
|
|
run_host_command_logged scripts/config --enable CONFIG_VERSION_VARIABLE
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: enable preboot & reset environment once in preboot" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_USE_PREBOOT
|
|
run_host_command_logged scripts/config --set-str CONFIG_PREBOOT "'echo armbian leds; led led-0 on; led led-1 on; sleep 0.1; led led-0 off; led led-1 off; sleep 0.1; led led-0 on; if test a\${armbian}a = atwicea; then echo armbian env already set once; else echo armbian resetting environment once; env default -f -a; setenv armbian twice; saveenv; fi'" # double quote
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: enable EFI debugging command" "info"
|
|
run_host_command_logged scripts/config --enable CMD_EFIDEBUG
|
|
run_host_command_logged scripts/config --enable CMD_NVEDIT_EFI
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: enable more compression support" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_LZO
|
|
run_host_command_logged scripts/config --enable CONFIG_BZIP2
|
|
run_host_command_logged scripts/config --enable CONFIG_ZSTD
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: enable gpio LED support" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_LED
|
|
run_host_command_logged scripts/config --enable CONFIG_LED_GPIO
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: enable networking cmds" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_NFS
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_WGET
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_DNS
|
|
run_host_command_logged scripts/config --enable CONFIG_PROT_TCP
|
|
run_host_command_logged scripts/config --enable CONFIG_PROT_TCP_SACK
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: enable more cmdline commands" "info" # for extra compat with eg HAOS
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_SQUASHFS
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_SETEXPR
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_FILEENV # added via cmd-fileenv-read-string-from-file-into-env.patch
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_CAT
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_XXD
|
|
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enabling UMS/RockUSB Gadget functionality" "info"
|
|
declare -a enable_configs=("CONFIG_CMD_USB_MASS_STORAGE" "CONFIG_USB_GADGET" "USB_GADGET_DOWNLOAD" "CONFIG_USB_FUNCTION_ROCKUSB" "CONFIG_USB_FUNCTION_ACM" "CONFIG_CMD_ROCKUSB" "CONFIG_CMD_USB_MASS_STORAGE")
|
|
for config in "${enable_configs[@]}"; do
|
|
run_host_command_logged scripts/config --enable "${config}"
|
|
done
|
|
# Auto-enabled by the above, force off...
|
|
run_host_command_logged scripts/config --disable USB_FUNCTION_FASTBOOT
|
|
}
|