mirror of
https://github.com/armbian/build
synced 2025-09-24 19:47:06 +07:00
54c896e029
- From https://github.com/edk2-porting/edk2-rk3588/releases/tag/v0.9.1 - For example, for `rock-5b_UEFI_Release_v0.9.1.img` - `UEFI_EDK2_BOARD_ID` is `rock-5b` - **Important**: this has no effect unless optional extension is enabled - to test this out: - make sure to read carefully the instructions at https://github.com/edk2-porting/edk2-rk3588/blob/master/README.md - suppose you previously built the regular u-boot version with: - `./compile.sh BOARD=rock-5b BRANCH=legacy RELEASE=jammy` - now you can build the UEFI version with: - `./compile.sh BOARD=rock-5b BRANCH=legacy RELEASE=jammy EXT=uefi-edk2-rk3588` - write the produced image to SD or eMMC and boot it - use normally, or enter "UMS" mode by selecting that option in the grub menu - You can write image to eMMC, boot it, enter UMS, write it again to NVMe, reboot, press <ESC> in UEFI and boot from NVMe - Also works if .img is written to eg USB stick, and UEFI edk2 is separately deployed to SPI flash - **Important**: make _absolutely_ sure you are able to force Maskrom mode (by shorting pins, pressing buttons, etc) before writing an UEFI image to eMMC; UEFI has no RockUSB ("Loader mode" support) at all. The new "initramfs-usb-gadget-ums" extension hopes to address this, but it is not guaranteed to work.
11 lines
600 B
Plaintext
11 lines
600 B
Plaintext
# Rockchip RK3588 SoC octa core 4-16GB SoC 2x1GBe eMMC USB3 NVMe SATA WiFi/BT HDMI DP HDMI-In RS232 RS485
|
|
declare -g BOARD_NAME="Mekotronics R58X"
|
|
declare -g BOARDFAMILY="rockchip-rk3588"
|
|
declare -g BOARD_MAINTAINER="monkaBlyat"
|
|
declare -g KERNEL_TARGET="legacy"
|
|
declare -g BOOT_FDT_FILE="rockchip/rk3588-blueberry-edge-v10-linux.dtb" # Specific to this board
|
|
declare -g UEFI_EDK2_BOARD_ID="r58x" # This _only_ used for uefi-edk2-rk3588 extension
|
|
|
|
# Source vendor-specific configuration
|
|
source "${SRC}/config/sources/vendors/mekotronics/mekotronics-rk3588.conf.sh"
|