mirror of
https://github.com/armbian/build
synced 2025-09-24 19:47:06 +07:00
79 lines
3.6 KiB
Plaintext
79 lines
3.6 KiB
Plaintext
# Rockchip RK3588S octa core 32GB RAM SoC eMMC NvME 1x USB3 4x USB2 1x GbE
|
|
BOARD_NAME="Youyeetoo R1 v3"
|
|
BOARDFAMILY="rockchip-rk3588"
|
|
BOARD_MAINTAINER="SuperKali"
|
|
BOOTCONFIG="youyeetoo-r1-rk3588s_defconfig" # vendor name, not standard, see hook below, set BOOT_SOC below to compensate
|
|
BOOT_SOC="rk3588"
|
|
KERNEL_TARGET="vendor,current,edge"
|
|
KERNEL_TEST_TARGET="vendor,edge"
|
|
FULL_DESKTOP="yes"
|
|
BOOT_LOGO="desktop"
|
|
IMAGE_PARTITION_TABLE="gpt"
|
|
BOOT_FDT_FILE="rockchip/rk3588s-youyeetoo-r1.dtb"
|
|
BOOT_SCENARIO="spl-blobs"
|
|
|
|
function post_family_tweaks__youyeetoo_r1_naming_audios() {
|
|
display_alert "$BOARD" "Renaming Youyeetoo R1 audios" "info"
|
|
|
|
mkdir -p $SDCARD/etc/udev/rules.d/
|
|
echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmi0-sound", ENV{SOUND_DESCRIPTION}="HDMI0 Audio"' > $SDCARD/etc/udev/rules.d/90-naming-audios.rules
|
|
echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-es8388-sound", ENV{SOUND_DESCRIPTION}="ES8388 Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules
|
|
|
|
return 0
|
|
}
|
|
|
|
function post_family_tweaks__youyeetoo_r1_naming_udev_network_interfaces() {
|
|
display_alert "$BOARD" "Renaming Youyeetoo R1 network interfaces to eth0" "info"
|
|
|
|
mkdir -p $SDCARD/etc/udev/rules.d/
|
|
cat <<- EOF > "${SDCARD}/etc/udev/rules.d/70-persistent-net.rules"
|
|
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", KERNELS=="fe1c0000.ethernet", NAME:="eth0"
|
|
EOF
|
|
}
|
|
|
|
# Mainline U-Boot
|
|
function post_family_config__youyeetoo_r1_use_mainline_uboot() {
|
|
display_alert "$BOARD" "Using mainline (next branch) U-Boot for $BOARD / $BRANCH" "info"
|
|
|
|
declare -g BOOTCONFIG="youyeetoo-r1-rk3588s_defconfig" # Use generic defconfig which should boot all RK3588 boards
|
|
declare -g BOOTDELAY=1 # Wait for UART interrupt to enter UMS/RockUSB mode etc
|
|
declare -g BOOTSOURCE="https://github.com/u-boot/u-boot.git" # We ❤️ Mainline U-Boot
|
|
declare -g BOOTBRANCH="tag:v2025.04"
|
|
declare -g BOOTPATCHDIR="v2025.04"
|
|
# Don't set BOOTDIR, allow shared U-Boot source directory for disk space efficiency
|
|
|
|
declare -g UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin"
|
|
|
|
# Disable stuff from rockchip64_common; we're using binman here which does all the work already
|
|
unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd
|
|
|
|
# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
|
|
function write_uboot_platform() {
|
|
dd "if=$1/u-boot-rockchip.bin" "of=$2" bs=32k seek=1 conv=notrunc status=none
|
|
}
|
|
}
|
|
|
|
# "rockchip-common: boot SD card first, then NVMe, then mmc"
|
|
# include/configs/rockchip-common.h
|
|
# -#define BOOT_TARGETS "mmc1 mmc0 nvme scsi usb pxe dhcp"
|
|
# +#define BOOT_TARGETS "mmc0 nvme mmc1 scsi usb pxe dhcp"
|
|
# On youyeetoo R1, mmc0 is the SD card, mmc1 is the eMMC slot
|
|
function pre_config_uboot_target__youyeetoo_r1_patch_rockchip_common_boot_order() {
|
|
declare -a rockchip_uboot_targets=("mmc0" "nvme" "mmc1" "scsi" "usb" "pxe" "dhcp") # for future make-this-generic delight
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: adjust boot order to '${rockchip_uboot_targets[*]}'" "info"
|
|
sed -i -e "s/#define BOOT_TARGETS.*/#define BOOT_TARGETS \"${rockchip_uboot_targets[*]}\"/" include/configs/rockchip-common.h
|
|
regular_git diff -u include/configs/rockchip-common.h || true
|
|
}
|
|
|
|
function post_family_tweaks__youyeetoo_r1 {
|
|
if [[ "${BRANCH}" != "vendor" ]]; then
|
|
display_alert "$BOARD" "Adjusting rtw89_8852be module" "info"
|
|
cat <<- EOF > "${SDCARD}/etc/modprobe.d/rtw8852be.conf"
|
|
options rtw89_pci disable_aspm_l1=y disable_aspm_l1ss=y
|
|
options rtw89pci disable_aspm_l1=y disable_aspm_l1ss=y
|
|
options rtw89_core disable_ps_mode=y
|
|
options rtw89core disable_ps_mode=y
|
|
EOF
|
|
fi
|
|
}
|