mirror of
https://github.com/armbian/build
synced 2025-09-24 19:47:06 +07:00
7f9e02b0a2
https://github.com/armbian/build/blob/main/extensions/network/config-networkd/netplan/10-dhcp-all-interfaces.yaml#L25
82 lines
4.0 KiB
Plaintext
82 lines
4.0 KiB
Plaintext
# Rockchip RK3568 quad core 4GB RAM eMMC NVMe 2x USB3 1x GbE 2x 2.5GbE
|
|
BOARD_NAME="NanoPi R5S"
|
|
BOARDFAMILY="rockchip64"
|
|
BOARD_MAINTAINER="utlark"
|
|
BOOT_SOC="rk3568"
|
|
KERNEL_TARGET="current,edge"
|
|
KERNEL_TEST_TARGET="current"
|
|
BOOT_FDT_FILE="rockchip/rk3568-nanopi-r5s.dtb"
|
|
SRC_EXTLINUX="no"
|
|
ASOUND_STATE="asound.state.station-m2" # TODO verify me
|
|
IMAGE_PARTITION_TABLE="gpt"
|
|
FULL_DESKTOP="yes"
|
|
BOOT_LOGO="desktop"
|
|
|
|
BOOTBRANCH_BOARD="tag:v2024.04"
|
|
BOOTPATCHDIR="v2024.04"
|
|
BOOTCONFIG="nanopi-r5s-rk3568_defconfig"
|
|
|
|
OVERLAY_PREFIX="rockchip-rk3568"
|
|
DEFAULT_OVERLAYS="nanopi-r5s-leds"
|
|
|
|
function post_family_config__uboot_config() {
|
|
display_alert "$BOARD" "u-boot ${BOOTBRANCH_BOARD} overrides" "info"
|
|
BOOTDELAY=2 # Wait for UART interrupt to enter UMS/RockUSB mode etc
|
|
UBOOT_TARGET_MAP="ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB} BL31=$RKBIN_DIR/$BL31_BLOB spl/u-boot-spl u-boot.bin flash.bin;;idbloader.img u-boot.itb"
|
|
}
|
|
|
|
function post_family_tweaks__nanopir5s_udev_network_interfaces() {
|
|
display_alert "$BOARD" "Renaming interfaces WAN1 LAN1 LAN2" "info"
|
|
|
|
mkdir -p $SDCARD/etc/udev/rules.d/
|
|
cat <<- EOF > "${SDCARD}/etc/udev/rules.d/70-persistent-net.rules"
|
|
SUBSYSTEM=="net", ACTION=="add", KERNELS=="fe2a0000.ethernet", NAME:="wan1"
|
|
SUBSYSTEM=="net", ACTION=="add", KERNELS=="0000:01:00.0", NAME:="lan1"
|
|
SUBSYSTEM=="net", ACTION=="add", KERNELS=="0001:01:00.0", NAME:="lan2"
|
|
EOF
|
|
}
|
|
|
|
# We've an overlay (DEFAULT_OVERLAYS="nanopi-r5s-leds") to drive the LEDs. Disable armbian-led-state service.
|
|
function pre_customize_image__nanopi-r5s_leds_kernel_only() {
|
|
display_alert "$BOARD" "Disabling armbian-led-state service since we have DEFAULT_OVERLAYS='${DEFAULT_OVERLAYS}'" "info"
|
|
chroot_sdcard systemctl --no-reload disable armbian-led-state
|
|
}
|
|
|
|
# For UMS/RockUSB to work in u-boot, &usb_host0_xhci { dr_mode = "otg" } is required. See 0002-usb-otg-mode.patch
|
|
# Attention: the Power USB-C port is NOT the OTG port; instead, the USB-A closest to the edge is the OTG port.
|
|
function post_config_uboot_target__extra_configs_for_nanopi-r5s() {
|
|
display_alert "u-boot for ${BOARD}" "u-boot: enable preboot & flash all LEDs and do PCI/NVMe enumeration in preboot" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_USE_PREBOOT
|
|
run_host_command_logged scripts/config --set-str CONFIG_PREBOOT "'led led-power on; led led-lan1 on; led led-lan2 on; led led-wan on; pci enum; nvme scan; led led-lan1 off; led led-lan2 off; led led-wan off'" # double quotes required due to run_host_command_logged's quirks
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: enable EFI debugging command" "info"
|
|
run_host_command_logged scripts/config --enable CMD_EFIDEBUG
|
|
run_host_command_logged scripts/config --enable CMD_NVEDIT_EFI
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: enable more compression support" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_LZO
|
|
run_host_command_logged scripts/config --enable CONFIG_BZIP2
|
|
run_host_command_logged scripts/config --enable CONFIG_ZSTD
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: enable gpio LED support" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_LED
|
|
run_host_command_logged scripts/config --enable CONFIG_LED_GPIO
|
|
|
|
display_alert "u-boot for ${BOARD}" "u-boot: enable networking cmds" "info"
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_NFS
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_WGET
|
|
run_host_command_logged scripts/config --enable CONFIG_CMD_DNS
|
|
run_host_command_logged scripts/config --enable CONFIG_PROT_TCP
|
|
run_host_command_logged scripts/config --enable CONFIG_PROT_TCP_SACK
|
|
|
|
# UMS, RockUSB, gadget stuff
|
|
declare -a enable_configs=("CONFIG_CMD_USB_MASS_STORAGE" "CONFIG_USB_GADGET" "USB_GADGET_DOWNLOAD" "CONFIG_USB_FUNCTION_ROCKUSB" "CONFIG_USB_FUNCTION_ACM" "CONFIG_CMD_ROCKUSB" "CONFIG_CMD_USB_MASS_STORAGE")
|
|
for config in "${enable_configs[@]}"; do
|
|
display_alert "u-boot for ${BOARD}/${BRANCH}" "u-boot: enable ${config}" "info"
|
|
run_host_command_logged scripts/config --enable "${config}"
|
|
done
|
|
# Auto-enabled by the above, force off...
|
|
run_host_command_logged scripts/config --disable USB_FUNCTION_FASTBOOT
|
|
|
|
}
|