mirror of
https://github.com/armbian/build
synced 2025-09-24 19:47:06 +07:00
d1186b8a0e
I have changed the way the patches are generated a bit. Instead of using orange-pi branch from megous tree for 6.6 kernel, I have used the following kernel branches a83t-suspend, af8133j, anx, audio, axp, cam, drm, err, fixes, mbus, modem, opi3, pb, pinetab, pp, ppkb, samuel, speed, tbs-a711, ths These branches were carefully chosen to include only allwinner related patches and remove importing of the rockchip related patches into the allwinner kernel. Following patches are modified to fix patch application failure - patches.armbian/arm64-dts-sun50i-h616-orangepi-zero2-reg_usb1_vbus-status-ok.patch - patches.armbian/arm64-dts-sun50i-h616-orangepi-zero2-Enable-GPU-mali.patch - patches.armbian/arm64-dts-allwinner-h616-Add-efuse_xlate-cpu-frequency-scaling-v1_6_2.patch - patches.armbian/arm64-dts-allwinner-h616-LED-green_power_on-red_status_heartbeat.patch - patches.armbian/arm64-dts-allwinner-overlay-Add-Overlays-for-sunxi64.patch - patches.armbian/arm64-dts-sun50i-h616-bigtreetech-cb1.patch Following patches are modified because of kernel api change to fix compilation failure - patches.armbian/drv-gpu-drm-sun4i-Add-HDMI-audio-sun4i-hdmi-encoder.patch - patches.armbian/drv-of-Device-Tree-Overlay-ConfigFS-interface.patch
81 lines
2.0 KiB
Diff
81 lines
2.0 KiB
Diff
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
|
|
From: The-going <48602507+The-going@users.noreply.github.com>
|
|
Date: Mon, 24 Jan 2022 15:34:01 +0300
|
|
Subject: arm:dts: h3-nanopi-neo Add regulator, leds, mmc2
|
|
|
|
---
|
|
arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts | 57 ++++++++++
|
|
1 file changed, 57 insertions(+)
|
|
|
|
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
|
|
index df71fab3cf4e..032849663443 100644
|
|
--- a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
|
|
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo.dts
|
|
@@ -49,6 +49,63 @@ / {
|
|
aliases {
|
|
ethernet0 = &emac;
|
|
};
|
|
+
|
|
+ /* Warning: sunxi-5.18:
|
|
+ * The leds node is present in the sun8i-h3-nanopi.dtsi file
|
|
+ * You will have to fix this situation yourself
|
|
+ */
|
|
+ leds {
|
|
+ compatible = "gpio-leds";
|
|
+
|
|
+ pwr {
|
|
+ label = "nanopi:red:pwr";
|
|
+ gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
|
|
+ linux,default-trigger = "default-on";
|
|
+ };
|
|
+
|
|
+ status {
|
|
+ label = "nanopi:green:status";
|
|
+ gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
|
|
+ linux,default-trigger = "heartbeat";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ vdd_cpux: gpio-regulator {
|
|
+ compatible = "regulator-gpio";
|
|
+ pinctrl-names = "default";
|
|
+ regulator-name = "vdd-cpux";
|
|
+ regulator-type = "voltage";
|
|
+ regulator-boot-on;
|
|
+ regulator-always-on;
|
|
+ regulator-min-microvolt = <1100000>;
|
|
+ regulator-max-microvolt = <1300000>;
|
|
+ regulator-ramp-delay = <50>; /* 4ms */
|
|
+ gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
|
|
+ gpios-states = <0x1>;
|
|
+ states = <1100000 0x0
|
|
+ 1300000 0x1>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&cpu0 {
|
|
+ cpu-supply = <&vdd_cpux>;
|
|
+};
|
|
+
|
|
+&mmc2 {
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&mmc2_8bit_pins>;
|
|
+ vmmc-supply = <®_vcc3v3>;
|
|
+ bus-width = <8>;
|
|
+ non-removable;
|
|
+ cap-mmc-hw-reset;
|
|
+ status = "okay";
|
|
+};
|
|
+
|
|
+&mmc2_8bit_pins {
|
|
+ /* Increase drive strength for DDR modes */
|
|
+ drive-strength = <40>;
|
|
+ /* eMMC is missing pull-ups */
|
|
+ bias-pull-up;
|
|
};
|
|
|
|
&ehci0 {
|
|
--
|
|
Armbian
|
|
|