mirror of
https://github.com/armbian/build
synced 2025-09-24 19:47:06 +07:00
73691a9e24
* meson64-edge/5.19: use `tag:v5.19-rc2`, meson64 kernel config and kernel patches, by @adeepv * meson64-edge/5.19: we don't need `CONFIG_ARCH_ROCKCHIP=y` for meson64, right? * meson64-edge/5.19: remove `meson_drv_shutdown` revert patch, instead `CONFIG_DRM_MESON=y` and its dependencies in .config - this allows other meson64's to shutdown properly, while allowing the N2(+) to reboot without kernel-side hangs * meson64-edge/5.19: odroidn2(+): remove SD UHS modes patch for ODROID N2(+) - it works when cold-booted - but changes voltage to enable - when rebooted, voltage persists and uboot can't read the SD anymore - adding the "odroid,reboot" driver+dt that is supposed to fix this, doesn't - so for now remove it * meson64-edge/5.19: odroidn2(+): add dumb gpio fan at 30 celsius - backport from rework in 5.10 * meson64-edge/5.19: odroidhc4: bring back `fan1_input` by adding fan details to DT - yeah, I know; the cooling map is right there too, so empty, poor thing. for later. * meson64-edge/5.19: bump to 5.19-rc3 * meson64-edge/5.19: radxa-zero: add patch to remove UHS mode so `wifi` works - sent by @pyavitz: https://raw.githubusercontent.com/pyavitz/debian-image-builder/feature/patches/amlogic/radxazero/wifi/001-arm64-dts-amlogic-radxa-zero-sdio-card-speed.patch - tested by @lanefu * meson64-edge/5.19: bump to 5.19-rc4 * meson64-edge/5.19: bump to 5.19-rc5 * meson64-edge/5.19: bump to 5.19-rc7 * meson64-edge/5.19: bump to 5.19.y branch, which is 5.19.0 right now * Add kernel config - tested on Odroid N2+ Co-authored-by: Vyacheslav Bocharov <adeep@lexina.in> Co-authored-by: Igor Pecovnik <igor.pecovnik@gmail.com>
95 lines
2.3 KiB
Diff
95 lines
2.3 KiB
Diff
From 795fad491189f7fd6034d6d639602119a4e60755 Mon Sep 17 00:00:00 2001
|
|
From: Christian Hewitt <christianshewitt@gmail.com>
|
|
Date: Tue, 17 Aug 2021 16:16:43 +0000
|
|
Subject: [PATCH 68/90] WIP: arm64: dts: meson: radxa-zero: add support for the
|
|
usb type-c controller
|
|
|
|
Radxa Zero uses an FUSB302 type-c controller, so lets enable it.
|
|
|
|
NB: Polarity swapping via GPIO is not implemented in the current driver
|
|
(see drivers/usb/typec/tcpm/fusb302.c) so it is not possible to handle
|
|
GPIOAO_6 for USB3 polarity control.
|
|
|
|
Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
|
|
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
|
|
---
|
|
.../dts/amlogic/meson-g12a-radxa-zero.dts | 44 +++++++++++++++++++
|
|
1 file changed, 44 insertions(+)
|
|
|
|
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
|
|
index e3bb6df42ff3..5e3dc013409f 100644
|
|
--- a/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
|
|
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a-radxa-zero.dts
|
|
@@ -60,6 +60,14 @@ sdio_pwrseq: sdio-pwrseq {
|
|
clock-names = "ext_clock";
|
|
};
|
|
|
|
+ typec2_vbus: regulator-typec2_vbus {
|
|
+ compatible = "regulator-fixed";
|
|
+ regulator-name = "TYPEC2_VBUS";
|
|
+ regulator-min-microvolt = <5000000>;
|
|
+ regulator-max-microvolt = <5000000>;
|
|
+ vin-supply = <&ao_5v>;
|
|
+ };
|
|
+
|
|
ao_5v: regulator-ao_5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "AO_5V";
|
|
@@ -191,6 +199,18 @@ wifi32k: wifi32k {
|
|
};
|
|
};
|
|
|
|
+&ao_pinctrl {
|
|
+ /* Ensure the TYPE C controller irq pin is not driven by the SoC */
|
|
+ fusb302_irq_pins: fusb302_irq {
|
|
+ mux {
|
|
+ groups = "GPIOAO_5";
|
|
+ function = "gpio_aobus";
|
|
+ bias-pull-up;
|
|
+ output-disable;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
&arb {
|
|
status = "okay";
|
|
};
|
|
@@ -278,6 +298,22 @@ &ir {
|
|
pinctrl-names = "default";
|
|
};
|
|
|
|
+&i2c_AO {
|
|
+ fusb302@22 {
|
|
+ compatible = "fcs,fusb302";
|
|
+ reg = <0x22>;
|
|
+
|
|
+ pinctrl-0 = <&fusb302_irq_pins>;
|
|
+ pinctrl-names = "default";
|
|
+ interrupt-parent = <&gpio_intc>;
|
|
+ interrupts = <59 IRQ_TYPE_LEVEL_LOW>;
|
|
+
|
|
+ vbus-supply = <&typec2_vbus>;
|
|
+
|
|
+ status = "okay";
|
|
+ };
|
|
+};
|
|
+
|
|
&pwm_AO_cd {
|
|
pinctrl-0 = <&pwm_ao_d_e_pins>;
|
|
pinctrl-names = "default";
|
|
@@ -403,3 +439,11 @@ &usb {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
};
|
|
+
|
|
+&usb2_phy0 {
|
|
+ phy-supply = <&typec2_vbus>;
|
|
+};
|
|
+
|
|
+&usb3_pcie_phy {
|
|
+ phy-supply = <&typec2_vbus>;
|
|
+};
|
|
--
|
|
2.35.1
|
|
|