JDM170/build
1
0
Fork 0
mirror of https://github.com/armbian/build synced 2025-09-24 19:47:06 +07:00
Code Issues Packages Projects Releases Wiki Activity
Files
211ce5ede50637934b67d877ce8a00c602fae89b
build/patch/kernel/archive/rockchip64-6.3/add-board-rock-pi-4c-plus.patch
Ricardo Pardini 906ca66430 rockchip64/edge/6.3: rebase/rewrite patches against v6.3.1; do archeology for mbox-less patches; materialize overwrites 
- materialized overwrites:
  - `add-board-helios64.patch`
  - `add-board-orangepi-r1-plus.patch`
  - `add-driver-for-Motorcomm-YT85xx+PHYs.patch`
  - `add-board-rk3328-roc-pc.patch`
- not touched: wifi patches, those still require work before rebase is consistent.
  - `wifi-4003-uwe5622-adjust-for-rockchip.patch`
    - this patch is done on top of the wifi drivers patches exclusively, and fails to apply out of tree.
    - we should probably consider moving this into the wifi drivers patch harness, not in the rockchip tree.
2023-05-16 08:55:33 +02:00

790 lines
19 KiB
Diff
Raw Blame History

From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: Igor Pecovnik <igorpecovnik@users.noreply.github.com>
Date: Wed, 2 Nov 2022 06:58:31 +0100
Subject: [ARCHEOLOGY] Add Radxa ROCK Pi 4C Plus (#4129)
> X-Git-Archeology: > recovered message: > * Add Rockpi 4C+
> X-Git-Archeology: > recovered message: > * add newer patches:
> X-Git-Archeology: > recovered message: > - apply patches from RadxaNaoki <noaki@radxa.com>
> X-Git-Archeology: > recovered message: > - ref 5652d6f9c2a4e2c50ac1040c0388859381b0616f: arm64: dts: rockchip: add gmac for ROCK 4C+ (#17)
> X-Git-Archeology: > recovered message: > - apply latest patches from Marcone <marco.nelissen@gmail.com>
> X-Git-Archeology: > recovered message: > - ref e39da181b099a86f5440ed1c08fc699d4a65aed7: arm64: dts: rockchip: Make Rock Pi 4C+ ethernet actually work
> X-Git-Archeology: > recovered message: > - ref 8c519612eeb852268371b3c596eec4622460e5bf: arm64: dts: rockchip: add Rock Pi 4C+ LEDs
> X-Git-Archeology: > recovered message: > - ref 726441afe687ea6059bac37f145ff204b75430f7: arm64: dts: rockchip: enable Rock Pi 4C+ wifi
> X-Git-Archeology: > recovered message: > - ref caad7bef3b5558e2598480c0a0089e2ac3cedcdd: arm64: dts: rockchip: enable Rock Pi 4C+ nvme
> X-Git-Archeology: > recovered message: > - ref 6cdc3215d1691bcd2a407a30e88efa0cec179eb2: arm64: dts: rockchip: enable Rock Pi 4C+ OTG
> X-Git-Archeology: > recovered message: > * default top USB3 port to host mode
> X-Git-Archeology: > recovered message: > * get 2nd HDMI port to work at least. :)
> X-Git-Archeology: > recovered message: > * revert OTG USB3.1 port back to otg mode
> X-Git-Archeology: > recovered message: > * [rockpi4c+] update board def. add usb host overlay.
> X-Git-Archeology: > recovered message: > * remove redundant HDMI clocks and voltages
> X-Git-Archeology: > recovered message: > * enable test builds for Rock PI 4 C+
> X-Git-Archeology: > recovered message: > * [rockpi4c+] add USB host overlay
> X-Git-Archeology: > recovered message: > Co-authored-by: Joe Khoobyar <fourheads@gmail.com>
> X-Git-Archeology: - Revision 9780da320eeb45832ddb680959646fcc5a6a38c3: https://github.com/armbian/build/commit/9780da320eeb45832ddb680959646fcc5a6a38c3
> X-Git-Archeology: Date: Wed, 02 Nov 2022 06:58:31 +0100
> X-Git-Archeology: From: Igor Pecovnik <igorpecovnik@users.noreply.github.com>
> X-Git-Archeology: Subject: Add Radxa ROCK Pi 4C Plus (#4129)
> X-Git-Archeology:
> X-Git-Archeology: - Revision af24261cad8aac0fe13efd57449a82ab1b33e868: https://github.com/armbian/build/commit/af24261cad8aac0fe13efd57449a82ab1b33e868
> X-Git-Archeology: Date: Wed, 02 Nov 2022 10:45:35 -0400
> X-Git-Archeology: From: Joe Khoobyar <joekhoobyar@users.noreply.github.com>
> X-Git-Archeology: Subject: AR-1301: add edge and desktop (#4377)
> X-Git-Archeology:
> X-Git-Archeology: - Revision 92f1a22d76b987afa7ba555d5b509adc51d689e7: https://github.com/armbian/build/commit/92f1a22d76b987afa7ba555d5b509adc51d689e7
> X-Git-Archeology: Date: Fri, 16 Dec 2022 13:38:13 +0100
> X-Git-Archeology: From: Igor Pecovnik <igorpecovnik@users.noreply.github.com>
> X-Git-Archeology: Subject: Re-add rockchip64 6.0 patches (#4575)
> X-Git-Archeology:
> X-Git-Archeology: - Revision 34ae84fac5d0b66a1ab2d1e51534b7beb13ef245: https://github.com/armbian/build/commit/34ae84fac5d0b66a1ab2d1e51534b7beb13ef245
> X-Git-Archeology: Date: Fri, 05 May 2023 14:22:00 +0200
> X-Git-Archeology: From: amazingfate <liujianfeng1994@gmail.com>
> X-Git-Archeology: Subject: bump rockchip64 edge to v6.3
> X-Git-Archeology:
---
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c-plus.dts | 720 ++++++++++
2 files changed, 721 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 99a44c400d6a..855348816853 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -60,6 +60,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock960.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-v2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c-plus.dts b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c-plus.dts
new file mode 100644
index 000000000000..9fc8d5baba54
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3399-rock-pi-4c-plus.dts
@@ -0,0 +1,720 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2022 Fuzhou Rockchip Electronics Co., Ltd
+ * Copyright (c) 2022 Radxa Limited
+ */
+
+/dts-v1/;
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3399.dtsi"
+#include "rk3399-opp.dtsi"
+
+/ {
+ model = "Radxa ROCK Pi 4C+";
+ compatible = "radxa,rockpi4c-plus", "radxa,rockpi4", "rockchip,rk3399";
+
+ aliases {
+ mmc0 = &sdmmc;
+ mmc1 = &sdhci;
+ mmc2 = &sdio0;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ clkin_gmac: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "clkin_gmac";
+ #clock-cells = <0>;
+ };
+
+ vcc_lan: vcc3v3-phy-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_lan";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc5v0_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0_sys";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vbus_host: vbus-host {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_en_oc>;
+ regulator-name = "vbus_host"; /* HOST-5V */
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_usb2>;
+ };
+
+ vcc5v0_typec: vcc5v0-typec-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_typec_en>;
+ regulator-name = "vcc5v0_typec";
+ regulator-always-on;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ virtual_pd: virtual-pd {
+ status = "disabled";
+ compatible = "linux,extcon-pd-virtual";
+ /* 0: positive, 1: negative*/
+ vpd,init-flip = <0>;
+ /* 0: u2, 1: u3*/
+ vpd,init-ss = <1>;
+ /* 0: dfp, 1: ufp, 2: dp 3: dp/ufp */
+ vpd,init-mode = <2>;
+ hpd-gpios = <&gpio4 25 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hpd_en>;
+ dp-pwr-supply = <&vcc3v3_sys>;
+ };
+
+ vcc_0v9: vcc-0v9 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_0v9";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&vcc3v3_sys>;
+ };
+
+ vcc3v3_pcie: vcc3v3-pcie-regulator {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_drv>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-name = "vcc3v3_pcie";
+ vin-supply = <&vcc5v0_sys>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ clocks = <&rk809 1>;
+ clock-names = "ext_clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_enable_h>;
+
+ /*
+ * On the module itself this is one of these (depending
+ * on the actual card populated):
+ * - SDIO_RESET_L_WL_REG_ON
+ * - PDN (power down when low)
+ */
+ reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
+ };
+
+ wireless_wlan: wireless-wlan {
+ compatible = "wlan-platdata";
+ rockchip,grf = <&grf>;
+ wifi_chip_type = "ap6256";
+ sdio_vref = <1800>;
+ WIFI,host_wake_irq = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ status = "okay";
+
+ user-led1 {
+ gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ default-state = "on";
+ };
+
+ user-led2 {
+ gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ };
+};
+
+&cdn_dp {
+ extcon = <&virtual_pd>;
+ status = "disabled";
+};
+
+&cpu_l0 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l1 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l2 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_l3 {
+ cpu-supply = <&vdd_cpu_l>;
+};
+
+&cpu_b0 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&cpu_b1 {
+ cpu-supply = <&vdd_cpu_b>;
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_RMII_SRC>;
+ assigned-clock-parents = <&clkin_gmac>;
+ clock_in_out = "input";
+ phy-supply = <&vcc_lan>;
+ phy-mode = "rgmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii_pins>;
+ snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+ snps,reset-active-low;
+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x28>;
+ rx_delay = <0x11>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+ i2c-scl-falling-time-ns = <30>;
+ i2c-scl-rising-time-ns = <180>;
+ clock-frequency = <400000>;
+
+ rk809: pmic@20 {
+ compatible = "rockchip,rk809";
+ reg = <0x20>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "rk808-clkout1", "rk808-clkout2";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
+ rockchip,system-power-controller;
+ wakeup-source;
+
+ vcc1-supply = <&vcc5v0_sys>;
+ vcc2-supply = <&vcc5v0_sys>;
+ vcc3-supply = <&vcc5v0_sys>;
+ vcc4-supply = <&vcc5v0_sys>;
+ vcc5-supply = <&vcc_buck5>;
+ vcc6-supply = <&vcc_buck5>;
+ vcc7-supply = <&vcc5v0_sys>;
+ vcc8-supply = <&vcc3v3_sys>;
+ vcc9-supply = <&vcc5v0_sys>;
+
+ regulators {
+ vdd_log: DCDC_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_log";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vdd_cpu_l: DCDC_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-ramp-delay = <6001>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vdd_cpu_l";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_ddr: DCDC_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-name = "vcc_ddr";
+ regulator-initial-mode = <0x2>;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ vcc3v3_sys: DCDC_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <0x2>;
+ regulator-name = "vcc3v3_sys";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcc_buck5: DCDC_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-name = "vcc_buck5";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
+ };
+ };
+
+ vcca_0v9: LDO_REG1 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-name = "vcca_0v9";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v8: LDO_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-name = "vcc_1v8";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
+ };
+ };
+
+ vcc0v9_soc: LDO_REG3 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+
+ regulator-name = "vcc0v9_soc";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <900000>;
+ };
+ };
+
+ vcca_1v8: LDO_REG4 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1850000>;
+ regulator-max-microvolt = <1850000>;
+
+ regulator-name = "vcca_1v8";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_mipi: LDO_REG5 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-name = "vcc_mipi";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_1v5: LDO_REG6 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+
+ regulator-name = "vcc_1v5";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_3v0: LDO_REG7 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-name = "vcc_3v0";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vccio_sd: LDO_REG8 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vccio_sd";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc_cam: LDO_REG9 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "vcc_cam";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vcc5v0_usb2: SWITCH_REG1 {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ regulator-name = "vcc5v0_usb2.0";
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <5000000>;
+ };
+ };
+
+ lcd_3v3: SWITCH_REG2 {
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-name = "lcd_3v3";
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+ };
+ };
+
+ vdd_cpu_b: syr827@40 {
+ compatible = "silergy,syr827";
+ reg = <0x40>;
+ regulator-compatible = "fan53555-reg";
+ pinctrl-0 = <&vsel1_gpio>;
+ vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_cpu_b";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ vdd_gpu: syr828@41 {
+ compatible = "silergy,syr828";
+ reg = <0x41>;
+ regulator-compatible = "fan53555-reg";
+ pinctrl-0 = <&vsel2_gpio>;
+ vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
+ regulator-name = "vdd_gpu";
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1500000>;
+ regulator-ramp-delay = <1000>;
+ fcs,suspend-voltage-selector = <1>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vcc5v0_sys>;
+ regulator-initial-mode = <1>; /* 1:force PWM 2:auto */
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+};
+
+&io_domains {
+ status = "okay";
+
+ bt656-supply = <&vcc_3v0>;
+ audio-supply = <&vcca_1v8>;
+ sdmmc-supply = <&vccio_sd>;
+ gpio1830-supply = <&vcc_3v0>;
+};
+
+&pmu_io_domains {
+ status = "okay";
+
+ pmu1830-supply = <&vcc_3v0>;
+};
+
+&sdmmc {
+ bus-width = <4>;
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ card-detect-delay = <800>;
+ disable-wp;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
+ vqmmc-supply = <&vccio_sd>;
+ status = "okay";
+};
+
+&sdio0 {
+ max-frequency = <200000000>;
+ supports-sdio;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ non-removable;
+ num-slots = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
+ sd-uhs-sdr104;
+ status = "okay";
+};
+
+&emmc_phy {
+ status = "okay";
+};
+
+&sdhci {
+ bus-width = <8>;
+ mmc-hs400-1_8v;
+ mmc-hs400-enhanced-strobe;
+ non-removable;
+ status = "okay";
+};
+
+&tcphy0 {
+ status = "okay";
+};
+
+&tcphy1 {
+ status = "okay";
+};
+
+&u2phy0 {
+ status = "okay";
+
+ u2phy0_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy0_host: host-port {
+ phy-supply = <&vbus_host>;
+ status = "okay";
+ };
+};
+
+&u2phy1 {
+ status = "okay";
+
+ u2phy1_otg: otg-port {
+ status = "okay";
+ };
+
+ u2phy1_host: host-port {
+ phy-supply = <&vbus_host>;
+ status = "okay";
+ };
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usb_host0_ehci {
+ status = "okay";
+};
+
+&usb_host0_ohci {
+ status = "okay";
+};
+
+&usb_host1_ehci {
+ status = "okay";
+};
+
+&usb_host1_ohci {
+ status = "okay";
+};
+
+&usbdrd3_0 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+ status = "okay";
+ extcon = <&u2phy0>;
+ dr_mode = "otg";
+};
+
+&usbdrd3_1 {
+ status = "okay";
+};
+
+&usbdrd_dwc3_1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&vopb {
+ status = "okay";
+};
+
+&vopb_mmu {
+ status = "okay";
+};
+
+&vopl {
+ status = "okay";
+};
+
+&vopl_mmu {
+ status = "okay";
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_i2c_xfer>, <&hdmi_cec>;
+ status = "okay";
+};
+
+&hdmi_sound {
+ status = "okay";
+};
+
+&hdmi_in_vopb {
+ status = "okay";
+};
+
+&hdmi_in_vopl {
+ status = "okay";
+};
+
+&i2c1 {
+ i2c-scl-rising-time-ns = <450>;
+ i2c-scl-falling-time-ns = <15>;
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
+&pcie0 {
+ ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
+ num-lanes = <4>;
+ pinctrl-0 = <&pcie_clkreqnb_cpm>;
+ pinctrl-names = "default";
+ vpcie0v9-supply = <&vcc_0v9>;
+ vpcie1v8-supply = <&vcc_1v8>;
+ vpcie3v3-supply = <&vcc3v3_pcie>;
+ status = "okay";
+};
+
+&pinctrl {
+ hpd {
+ hpd_en: hpd-en {
+ rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
+ rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+
+ vsel1_gpio: vsel1-gpio {
+ rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+
+ vsel2_gpio: vsel2-gpio {
+ rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+
+ sdmmc {
+ sdmmc_bus4: sdmmc-bus4 {
+ rockchip,pins = <4 8 1 &pcfg_pull_up_8ma>,
+ <4 9 1 &pcfg_pull_up_8ma>,
+ <4 10 1 &pcfg_pull_up_8ma>,
+ <4 11 1 &pcfg_pull_up_8ma>;
+ };
+
+ sdmmc_clk: sdmmc-clk {
+ rockchip,pins = <4 12 1 &pcfg_pull_none_18ma>;
+ };
+
+ sdmmc_cmd: sdmmc-cmd {
+ rockchip,pins = <4 13 1 &pcfg_pull_up_8ma>;
+ };
+ };
+
+ usb-typec {
+ vcc5v0_typec_en: vcc5v0-typec-en {
+ rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ vbus_host {
+ usb1_en_oc: usb1-en-oc {
+ rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
+ pcie {
+ pcie_drv: pcie-drv {
+ rockchip,pins =
+ <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sdio-pwrseq {
+ wifi_enable_h: wifi-enable-h {
+ rockchip,pins =
+ <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
--
Armbian
Reference in New Issue View Git Blame Copy Permalink