mirror of
https://github.com/armbian/build
synced 2025-09-24 19:47:06 +07:00
7d4cdc6231
- Bump U-Boot from v2024.10-rc3 to v2024.10 - Move U-Boot patch dir to default one (`$BOOTBRANCH/board_$BOARD`) which gets applied automatically by the patcher for the specific $BOARD - Little fixes: Use `declare -g` and a code style similar to NanoPi R6 series
75 lines
3.4 KiB
Plaintext
75 lines
3.4 KiB
Plaintext
# Rockchip RK3566 quad core 4/8GB RAM SoC WIFI/BT eMMC USB2 USB3 NVMe PCIe GbE HDMI SPI
|
|
BOARD_NAME="Orange Pi 3B"
|
|
BOARDFAMILY="rk35xx"
|
|
BOARD_MAINTAINER=""
|
|
BOOTCONFIG="orangepi-3b-rk3566_defconfig"
|
|
BOOT_SOC="rk3566"
|
|
KERNEL_TARGET="vendor,edge"
|
|
FULL_DESKTOP="yes"
|
|
BOOT_LOGO="desktop"
|
|
IMAGE_PARTITION_TABLE="gpt"
|
|
BOOT_SCENARIO="spl-blobs"
|
|
BOOT_SUPPORT_SPI="yes"
|
|
BOOT_SPI_RKSPI_LOADER="yes"
|
|
|
|
# Override family config for this board; let's avoid conditionals in family config.
|
|
function post_family_config__orangepi3b_use_mainline_uboot() {
|
|
display_alert "$BOARD" "Using mainline U-Boot for $BOARD / $BRANCH" "info"
|
|
|
|
declare -g BOOTSOURCE="https://github.com/u-boot/u-boot.git" # We ❤️ Mainline U-Boot
|
|
declare -g BOOTBRANCH="tag:v2024.10"
|
|
declare -g BOOTPATCHDIR="v2024.10"
|
|
# Don't set BOOTDIR, allow shared U-Boot source directory for disk space efficiency
|
|
|
|
declare -g BOOTDELAY=1 # Wait for UART interrupt to enter UMS/RockUSB mode etc
|
|
|
|
declare -g UBOOT_TARGET_MAP="BL31=${RKBIN_DIR}/${BL31_BLOB} ROCKCHIP_TPL=${RKBIN_DIR}/${DDR_BLOB};;u-boot-rockchip.bin u-boot-rockchip-spi.bin u-boot.itb idbloader.img idbloader-spi.img"
|
|
unset uboot_custom_postprocess write_uboot_platform write_uboot_platform_mtd # disable stuff from rockchip64_common; we're using binman here which does all the work already
|
|
|
|
# Just use the binman-provided u-boot-rockchip.bin, which is ready-to-go
|
|
function write_uboot_platform() {
|
|
dd if=${1}/u-boot-rockchip.bin of=${2} bs=32k seek=1 conv=fsync
|
|
}
|
|
|
|
# Smarter/faster/better to-spi writer using flashcp (hopefully with --partition), using the binman-provided 'u-boot-rockchip-spi.bin'
|
|
function write_uboot_platform_mtd() {
|
|
declare -a extra_opts_flashcp=("--verbose")
|
|
if flashcp -h | grep -q -e '--partition'; then
|
|
echo "Confirmed flashcp supports --partition -- read and write only changed blocks." >&2
|
|
extra_opts_flashcp+=("--partition")
|
|
else
|
|
echo "flashcp does not support --partition, will write full SPI flash blocks." >&2
|
|
fi
|
|
flashcp "${extra_opts_flashcp[@]}" "${1}/u-boot-rockchip-spi.bin" /dev/mtd0
|
|
}
|
|
}
|
|
|
|
function post_family_tweaks_bsp__orangepi3b() {
|
|
display_alert "$BOARD" "Installing orangepi3b-sprd-bluetooth.service" "info"
|
|
|
|
# Bluetooth on orangepi3b board is handled by a Spreadtrum (sprd) chip and requires
|
|
# a custom hciattach_opi binary, plus a systemd service to run it at boot time
|
|
install -m 755 $SRC/packages/bsp/rk3399/hciattach_opi $destination/usr/bin
|
|
install -m 755 $SRC/packages/bsp/orangepi3b/orangepi3b-sprd-bluetooth $destination/usr/bin/
|
|
cp $SRC/packages/bsp/orangepi3b/orangepi3b-sprd-bluetooth.service $destination/lib/systemd/system/
|
|
|
|
return 0
|
|
}
|
|
|
|
function post_family_tweaks__orangepi3b_enable_services() {
|
|
display_alert "$BOARD" "Enabling orangepi3b-sprd-bluetooth.service" "info"
|
|
chroot_sdcard systemctl enable orangepi3b-sprd-bluetooth.service
|
|
return 0
|
|
}
|
|
|
|
function post_family_tweaks__orangepi3b_naming_audios() {
|
|
display_alert "$BOARD" "Renaming orangepi3b audios" "info"
|
|
|
|
mkdir -p $SDCARD/etc/udev/rules.d/
|
|
echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-hdmi-sound", ENV{SOUND_DESCRIPTION}="HDMI Audio"' > $SDCARD/etc/udev/rules.d/90-naming-audios.rules
|
|
echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-rk809-sound", ENV{SOUND_DESCRIPTION}="RK809 Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules # vendor dts
|
|
echo 'SUBSYSTEM=="sound", ENV{ID_PATH}=="platform-sound", ENV{SOUND_DESCRIPTION}="RK809 Audio"' >> $SDCARD/etc/udev/rules.d/90-naming-audios.rules # mainline dts
|
|
|
|
return 0
|
|
}
|