Thomas McKahan 0ed6ed5194 [Meson64] Dev patch adjustment, bugfix

2018-11-21 01:48:44 -05:00

..

boot-cubox.cmd

Switching Cubox NEXT to mainline u-boot, adding a bunch of hummingboard/cubox related fixes on top of mainline source

2017-12-13 20:21:16 +01:00

boot-espressobin.cmd

Make Espressobin boot script CRYPTOROOT compatible

2018-09-07 15:02:11 +02:00

boot-marvell.cmd

Helios4: Add SPI bootloader install feature (#1126)

2018-10-08 13:44:36 +02:00

boot-meson64.cmd

[Meson64] U-boot bump to 2018.11, move C2 to Meson64 U-boot

2018-11-20 23:49:53 -05:00

boot-mt7623.cmd

Bananapi R2 (#1151)

2018-11-08 18:51:42 +01:00

boot-mvebu-next.cmd

Add mvebu dev branch

2017-10-31 21:23:43 +03:00

boot-odroid-c1.ini

Enable Odroid C1 NEXT, 4.17.y ... usable as headless server. Known issues: stuck on reboot, need power cycle, no hdmi console, no DVFS.

2018-08-01 13:00:31 +02:00

boot-odroid-c2.ini

Moving Odroid C2 default to 3.16.y

2018-06-22 10:57:55 +00:00

boot-odroid-xu4-default.ini

[odroid xu4] Drop kernel 3.10.y, default -> offical 4.14.y, next = vanilla 4.19.y http://ix.io/1rcZ & dev = n/a

2018-11-07 11:11:51 +01:00

boot-pine64-default.cmd

Added legacy kernel (3.10.107) targets for several A64 boards: Orangepi Win and Bananapi M64 were tested, the rest is untested: NanopiA64, Olinuxino A64 and Teres A64

2018-01-09 22:51:54 +01:00

boot-rockchip64.cmd

[RK3399] DEV kernel bumped to 4.19.RC4, adjusted kernel config, set u-boot to v2018.09, fix serial console output, default boot console is now HDMI, tested on FA Nanopc T4; default kernel bumped to 4.4.160 and re-add patch which address some issues

2018-10-10 17:25:28 +02:00

boot-rockchip.cmd

[Tinkerboard/MiQi] Fix eMMC boot problem on MiQi by reverting back to old u-boot, fix console that both are present, HDMI and serial, adjust boot script that we don't need hardcode DTB. U-boot variable is set to RK3288-tinker so adding symlink to RK3288-miniarm which represent the board in a legacy kernel. Added upstream patch, tested on MiQi and Tinkerboard S, default and dev, upgrades still need to be tested ...

2018-10-12 14:10:42 +02:00

boot-s5p6818.cmd

[s5p6818] Adjust boot script to show HDMI console bootlog instead of serial. Adjust kernel configuration. @TonyMac32 CONFIG_BT_HCIUART_3WIRE is gone from config here as well.

2018-10-25 11:28:50 +02:00

boot-sun50i-next.cmd

[ sunxi-dev ] Moving to 4.19.y Tested: H3, H5 (unstable?!), H6(no hdmi), R40 (no hdmi), A83T, A64, ... some wireless drivers were left. They need to be adjusted for 4.19.y

2018-11-13 11:50:40 +01:00

boot-sunxi.cmd

[ sunxi ] fixed boot console output to match reality. In "both" mode you can have serial console login, but boot log goes to HDMI. In "serial" you (current "both" defaults) you get boot log to serial console, console login and blinking cursor on HDMI which is hard to spot. Lot's of people thinks board doesn't work ...

2018-11-10 21:16:39 +01:00

boot-udoo-neo.cmd

udoo: Allow rootfstype specified in armbianEnv.txt to be used

2018-08-02 21:10:15 +10:00

boot-udoo.cmd

udoo: Allow rootfstype specified in armbianEnv.txt to be used

2018-08-02 21:10:15 +10:00