BOOTSOURCE='https://github.com/SolidRun/u-boot-imx6'
BOOTBRANCH='branch:imx6'
BOOTDIR='u-boot-cubox'
BOOTSCRIPT='boot-cubox.cmd:boot.cmd'
BOOTENV_FILE='cubox-default.txt'

UBOOT_TARGET_MAP=';;SPL u-boot.img'

UBOOT_USE_GCC='< 5.0'

case $BRANCH in
	default)
	KERNELSOURCE='https://github.com/linux4kix/linux-linaro-stable-mx6'
	KERNELBRANCH='branch:linux-linaro-lsk-v3.14-mx6'
	KERNELDIR='linux-cubox'
	KERNEL_USE_GCC='< 5.0'
	;;

	next)
	KERNELSOURCE=$MAINLINE_KERNEL_SOURCE
	KERNELBRANCH=$MAINLINE_KERNEL_BRANCH
	KERNELDIR=$MAINLINE_KERNEL_DIR
	BOOTPATCHDIR='u-boot-cubox-next'
	;;

	dev)
	KERNELSOURCE='https://github.com/SolidRun/linux-fslc'
	KERNELBRANCH='branch:3.14-1.0.x-mx6-sr'
	KERNELDIR='linux-cubox'
	;;
esac

CPUMIN=396000
CPUMAX=996000
GOVERNOR=interactive

SERIALCON=ttymxc0

write_uboot_platform()
{
	dd if=$1/SPL of=$2 bs=512 seek=2 status=noxfer > /dev/null 2>&1
	dd if=$1/u-boot.img of=$2 bs=1K seek=42 status=noxfer > /dev/null 2>&1
}

if [[ $BOARD == wandboard-quad ]]; then
	UBOOT_USE_GCC='> 6.0'
	KERNEL_USE_GCC='> 6.0'
	CPUMAX=1008000
	GOVERNOR=ondemand
	HAS_UUID_SUPPORT=yes
	BOOTSOURCE=$MAINLINE_UBOOT_SOURCE
	BOOTDIR=$MAINLINE_UBOOT_DIR
	BOOTBRANCH="branch:v2017.03"
	write_uboot_platform()
	{
		dd if=$1/SPL of=$2 bs=512 seek=2 status=noxfer > /dev/null 2>&1
		dd if=$1/u-boot.img of=$2 seek=69 bs=1k status=noxfer > /dev/null 2>&1
	}
fi

family_tweaks()
{
	# default lirc configuration
	sed -e 's/DEVICE=""/DEVICE="\/dev\/lirc0"/g' -i $SDCARD/etc/lirc/hardware.conf
	sed -e 's/DRIVER="UNCONFIGURED"/DRIVER="default"/g' -i $SDCARD/etc/lirc/hardware.conf
	cp $SRC/config/lirc.conf.cubox-i $SDCARD/etc/lirc/lircd.conf
	# TODO: Fix the workaround in firstrun?
	#chroot $SDCARD /bin/bash -c "LC_ALL=C LANG=C update-rc.d brcm4330-patch defaults > /dev/null"
}

family_tweaks_bsp()
{
	install -m 755 $SRC/packages/bsp/cubox/brcm_patchram_plus $destination/usr/bin/brcm_patchram_plus
	cp $SRC/packages/bsp/cubox/brcm4330 $destination/etc/default/
	# TODO: replace by a systemd service
	install -m 755 $SRC/packages/bsp/cubox/brcm4330-patch $destination/etc/init.d/brcm4330-patch
}