- partially revert 6ef394d95d (thus bring back the TUI/dialog for selecting KERNEL_CONFIGURE=yes/no)
- partially revert d890b418c7 (thus bring back the capacity to config & build image in one go)
- stop after configuring kernel, but only if command is `kernel-config`, not regular image-build KERNEL_CONFIGURE=yes
- revert #5139 Revert "Apt lists is needed for synpatic index generation"
This reverts commit 63e9bd3baa
- this actually only left junk in rootfs cache for the future to find
- all interactive commands now **don't build the artifact** anymore; just patches/.configs are produced and then build ends
- user is required to put the produced patches in the right place and build again, for full consistency
- split ATF and U-BOOT manual patching process; use CLI command `atf-patch` to patch ATF, and `uboot-patch` to patch u-boot
- non-interactive artifact builds are now 100% sans-stdin
- introduce `uboot-config` CLI command; still experimental, only produces a defconfig and not a patch
- reworked `userpatch_create()` to be (hopefully) more useful:
- detects a previous patch and offers to apply it before continuing
- enters a loop showing the diff, and only proceeds when user indicates he's happy with the patch
- produces `mbox`-formatted patches via `format-patch` and standard Armbian parameters
- uses MAINTAINER and MAINTAINERMAIL instead of git configuration (so it works in containers)
- don't allow image builds with any patching or configuring _at all_ (it has been deprecated with a warning for months already, and results are inconsistent)
Add interactive configurations to Repeat Build Options
Simplify function produce_repeat_args_array()
- make use of $ARMBIAN_NON_PARAM_ARGS and $ARMBIAN_PARSED_CMDLINE_PARAMS (associated array)
- quote parameter values to be on the safe side
Move "Repeat Build Options" logs to start-end.sh
- cli-build.sh, start-end.sh:
- move function function produce_repeat_args_array() to start-end.sh
- add $WHAT as first arg to produce_repeat_args_array() if
$WHAT is not empty
- move early display log of "Repeat Build Options" to
function main_default_start_build()
- move last log of "Repeat Build Options" to
function main_default_end_build()
- add last log of "Repeat Build Options" to
LOG_SECTION="repeat_build_options"
- rootfs: rootfs-create: show a summary of the 20 biggest dirs, right before tarring the rootfs (for debugging)
- rootfs: rootfs-create: show usage of caches between first and second stages
- rootfs: rootfs-create: cleanup junk left by `debootstrap` after second stage
- rootfs: rootfs-create: _always_ clean apt stuff at the end
- rename `apt_purge_unneeded_packages()` to `apt_purge_unneeded_packages_and_clean_apt_caches()` for clarity
- image: `apt_purge_unneeded_packages_and_clean_apt_caches()`: warn if apt caches not empty; clean them off, always.
- host-utils: `local_apt_deb_cache_prepare()`: also test the target, warn if not empty
- extension: cleanup-space-final-image: do NOT clean apt stuff. done in core now
- the metric shit-ton of debugs added should help the next person who faces this in the future
- if CONFIG_DEFS_ONLY during `obtain_complete_artifact()`, just dump JSON to stdout after calculating version/coordinates
- don't prepare ORAS tooling if CONFIG_DEFS_ONLY
- don't run in standard build (and thus don't prepare_host()) if under CONFIG_DEFS_ONLY
- if CONFIG_DEFS_ONLY, don't run `check_basic_host()`
- bsp-cli: does not require aggregation
- bsp-desktop / desktop: requires aggregation
- 'desktop' packaged moved out of 'bsp' folder, it is NOT a bsp
- make consistent naming/folders
- extract .sh generation workflow into 'declare -f' magic functions
- `SHOW_DEBIAN=yes` to bump most of `DEBIAN/xxx` stuff to screen
- artifact armbian-bsp-desktop: use aggregation, require certain vars, CLI forces `BUILD_DESKTOP=yes`; requires BOARD
- artifact armbian-desktop: use aggregation, require certain vars, CLI forces `BUILD_DESKTOP=yes`, not require `BOARD` anymore
- cli: commands: fix artifact aliases, reorder
- desktop/bsp-desktop: add `config_dump` method; fix `artifact_map_debs` ref subdir and name
- artifact bsps: require aggregation to build, not to list what needs to be built
- distro-agnostic: fix install of `armbian-bsp-cli` (not `armbian-bsp`)
- armbian-bsp-cli: add `_config_dump` method, use configuration with aggregation, add required vars check
- distro-specific: fix installation of `fake-ubuntu-advantage-tools`
- include rudimentary artifact dependency information for config-dump-json: fixes/refactor/cleanup
- artifact-rootfs.sh: include rudimentary artifact dependency information for config-dump-json
- artifact-armbian-(config/plymouth-theme/zsh).sh: include rudimentary artifact dependency information for config-dump-json
- artifact-fake-ubuntu-advantage-tools.sh: include rudimentary artifact dependency information for config-dump-json
- use new capture'd vars scheme
- so `./compile.sh BOARD=xxx BRANCH=yyyy config-dump-json | jq .` now works and is consistent/newline tolerant
- introduce internal `skip_host_config=yes` for `prep_conf_main_minimal_ni()` to skip calling `check_basic_host()`
* Add / modify (c) in bash scripts
Signed-off-by: Igor <igor@armbian.com>
* Add (c) to the source config files
---------
Signed-off-by: Igor <igor@armbian.com>
- compress *all* present output images, not only .img
- remove 7zip compression & hostdep
- squash a few shortcircuits (yeah, this late in the game...)
- artifacts: introduce `ARTIFACT_IGNORE_CACHE=yes`
- artifacts: introduce `DONT_BUILD_ARTIFACTS`, list of artifacts that if not found cached, fail the build
- kernel_package_source() is no more
- a long dissertation about kernels, families, and the universe
- artifacts: actually use rootfs artifact for image build
- artifacts: detangle via artifact_base_dir
- artifacts: rootfs: use folders in artifact_name; include cache_type
- artifacts: some cleanups / validations
- rootfs artifact; drop old rootfs cli
- artifacts: new CLI shortcuts; remove old firmware CLI
- artifacts: full firmware & usage
- use firmware artifacts in image build and install its debs
- kernel artifact sans legacy; use tmpdir for .deb target for all packages
- legacy artifact versions is no more; pack/unpack now in common obtain;
- artifacts: uboot: cleanup legacy renaming, use artifact version directly
- artifacts: add firmware (small) artifact
- deploy uboot to loop from artifact; allow tty to artifact; todos for cleaning
- fixes, kernel dtb/headers conditional; remove `.git` from Makefile url; use mapfile for finding files to hash
- completely remove KERNEL_HAS_WORKING_HEADERS_FULL_SOURCE and `kernel_package_callback_linux_headers_full_source()`
- don't use realpath for artifact_file_relative
- curb some warnings
- fix: only install headers & dtbs if such exist
- kernel .config hook modification hash versioning
- OCI_TARGET_BASE vs per-artifact defaults; only deploy to remote from CLI with OTB
- artifact revolver & installing into image
- add artifact_map_packages and artifact_map_debs dicts
- revolver accumulates all info
- REPOSITORY_INSTALL is no more (for uboot/kernel, later others)
- rename `VER` to `IMAGE_INSTALLED_KERNEL_VERSION`
- killed `[[ $ROOTFS_TYPE != ext4 ]] && display_alert "Assuming ${BOARD} ${BRANCH} kernel supports ${ROOTFS_TYPE}" "" "wrn"`
- which definitely didn't belong in rootfs
- disable usage of run_host_command_logged_long_running for kernel-make
- stop lying about long_running stuff being any different from non-long_running versions
- stop lying about 'set -e' when there's still a bunch of pipes for "pv" and stuff all around
- require ARCH/RELEASE for rootfs cli
- disallow BOARD/LINUXFAMILY/BOARDFAMILY being set for rootfs cli
- split `prep_conf_main_only_rootfs()` instead of `prep_conf_main_build_single()` for rootfs-only stuff
- run both conf and build without stdin for rootfs CLI (no interactive allowed)
- don't blindly set `ARCH=armhf` for no reason in main-config
- allow skipping family stuff in main-config, via `allow_no_family=yes` (used only in `prep_conf_main_only_rootfs()`)
- kill double loading of userpatches family, not needed/old code
- allow skipping kernel stuff via `skip_kernel=yes` in `config_pre_main()` (used only in `prep_conf_main_only_rootfs()`)
- make `tmpfs_estimated_size` and `available_physical_memory_mib` readonly and global and only ever set once
- remove subshell from `get_rootfs_cache_list()`, new version `get_rootfs_cache_list_into_array_variable()` for sanity
- warns if `ROOT_FS_CREATE_ONLY=yes` is set during cached build path
- add a `wait_for_disk_sync()` after restoring rootfs cache
- fix logging sections for `build_rootfs_only()` and `prepare_rootfs_build_params_and_trap()` in `build_rootfs_and_image()`
- remove the logging section from `get_or_create_rootfs_cache_chroot_sdcard()` call in `build_rootfs_only()` (which is now itself logged)
- @TODO: `deploy_qemu_binary_to_chroot()` is leaking a qemu bin in rootfs cache!
- _told ya it would all make sense eventually..._
- introduce new, real, non-alias `rootfs` command in `cli-rootfs` -- this _only_ builds rootfs, nothing else
- no more `main_default_build_single()`; instead `full_build_packages_rootfs_and_image()`
- introduce `do_with_default_build()` wrapper, for things that need host prepared + aggregation to run
- CLI-specific parts of `main_default_build_single()` moved to cli-build
- put prepare/cleanup pair of `prepare_rootfs_build_params_and_trap()` and `trap_handler_cleanup_rootfs_and_image()` into new `trap-rootfs.sh` (this needs further splitting for the image part)
- refactor `get_or_create_rootfs_cache_chroot_sdcard()` into `build_rootfs_only()`, `calculate_rootfs_cache_id()`
- update library with new files
