* meson-s4t7: bump u-boot to khadas-vims-u-boot-2019.01-v1.6-release
* Use khadas default bootargs as much as possible
* Add new hook to allow copying code into kernel
* meson-s4t7: legacy: Switch to 5.15 kernel
* meson-s4t7: add kernel-config for 5.15 kernel
* device tree overlays for 5.15 kernel for vim1s and vim4
* restructure packaging of bsp files for vim1s/vim4
* silence vblank warning on boot
* Remove display workaround as it doesn't work with 5.15 kernel
* Remove 5.4 kernel patches
- really can't remember why I added those, and they cause trouble for BTF
- See https://www.kernel.org/doc/html/next/bpf/btf.html
- `CONFIG_DEBUG_INFO_BTF: Generate BTF typeinfo`
- _Generate deduplicated BTF type information from DWARF debug info. Turning this on expects presence of pahole tool, which will convert DWARF type info into equivalent deduplicated BTF type info._
- this should make drivers hash consistent, at the expense of being moar tiresome
- _any_ changes at _any_ patches or drivers-related bash code will cause _all_ kernels to be rebuilt
- opposed to "some changes caused all kernels to be rebuilt"
There are many changes in this file and its impossible to cover this with a patch for now current and all kernels back
We are using same hack in UWE drivers.
This is just a cosmetic change. Patches have been consolidated
into one patch within each corresponding linux version directory.
Added: linux-6.6 (RC-1)
Removed: linux-6.2/6.3
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
Also added some cleanup fixes to silence some of the compiler warnings,
fixes for issues during inserting and removing xradio module and fixes
for possible data corruption on vmmaped stack.
All of these fixes were taken from https://github.com/fifteenhex/xradio
* patch: misc: rtw88: wireless-next: 2023-08-25
Updated: 6.1 / 6.4
Added: 6.5
For doc sake, this update makes 6.1 slightly differrent than 6.4 and
6.5 in one particular area of main.c.
As shown here:
7746e2fa87
6.1 requires we use del_timer_sync, where the above releases use
timer_delete_sync.
Tested-on: ODROID-C4 X96-AIR BPI-CM4 (linux 6.x.y)
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
* driver_rtw88: `linux-version compare "${version}" ge 6.1`
Suggested-by: @viraniac
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
---------
Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
Co-authored-by: Patrick Yavitz <pyavitz@xxxxx.com>
> tl-dr:
> - maximize OCI cache hit ratio across nightlies/releases/PRs/etc;
> - publish simple `Version:`'s that don't include a crazy hash in repo and images
> - introduce `output/packages-hashed` directory
> - radically change the `output/debs` directory structure
- simplify artifact's `prepare_version()` method for `deb` and `deb-tar` artifacts:
- `artifact_base_dir` and `artifact_final_file` will now be auto-calculated; thus removed from each artifact (except `rootfs`)
- `artifact_deb_repo` ("global", "jammy", "bookworm") is now required; "global" means common across all RELEASES
- `artifact_deb_arch` is now required, "all" is arch-independent, otherwise use `${ARCH}`
- `artifact_map_debs` is now auto-calculated based on the above, and shouldn't be specified manually
- `artifact_final_version_reversioned` is optional, and can force the final version of the artifact (specific for the `base-files` case)
- artifacts that need special handling for reversioning can add function names to `artifact_debs_reversion_functions` array (`base-files` and `bsp-cli` cases)
- artifacts `prepare_version()` should set `artifact_version`, but _never_ include it in other variables; `artifact_version` is now changed by framework after `prepare_version()` returns
- no longer use/refer/mention `${REVISION}` when building packages. All packages should be `${REVISION}`-agnostic.
- `${REVISION}` (actually, `artifact_final_version_reversioned`) will be automatically swapped in the `control` file during reversioning
- `fakeroot_dpkg_deb_build()` now takes exactly two arguments: the directory to pack, and the deb ID (key of `artifact_map_packages` dict); add this change in all the artifact's code for this
- `obtain_complete_artifact()`:
- automatically adds `-Rxxxx` "revisioning-hash" to `artifact_version`, by hashing the revisioning functions and any `artifact_debs_reversion_functions` set
- calculates more complex subdirectory paths for both the `output/packages-hashed` and `output/debs`/`output/debs-beta` directories
- with the new subdirectories we can be sure a re-version is already done correctly and can skip it (eg, for partial `download-debs` re-runs)
- in the future we can automatically clean/remove old versions that are no longer relevant based on the dir structure
- exports a lot more information to JSON, including the new subdirectory paths
- comment-out code that implemented `skip_unpack_if_found_in_caches`, I'm very unsure why we had this in the first place
- `obtain_artifact_from_remote_cache()`
- for `deb` type artifacts, OCI won't preserve the subdirectory structure, so move downloaded files to the correct subdirectory manually
- this is not needed for `deb-tar`, since that can preserve the dir structure itself
- introduce `artifacts-reversion.sh` and its main function `artifact_reversion_for_deployment()`
- this has the logic for reversioning .deb's, by `ar`-unpacking them, changing `control.tar` (and possibly `data.tar`), handling `.xz` compression, etc.
- also handles hashing those functions, for consistency. Any changes in reversioning code actually change the artifact itself so we're not caught by surprise
- by default, it changes `control` file only:
- replace `Version:` (which is the hash-version originally) with `artifact_final_version_reversioned` (which is mostly just `${REVISION}`)
- add a custom field `Armbian-Original-Hash:` with the original hash-version
- `artifact_reversion_for_deployment()` is called by
- new CLI wrapper `cli_obtain_complete_artifact()`, used for CLI building of specific artifact, but also for `download-artifact`
- `build_artifact_for_image()` used during image build
- `armbian-bsp-cli-deb.sh`: move `${REVISION}` related stuff from the main package build to new reversioning functions.
- `artifact-armbian-base-files.sh`: move `${REVISION}` related stuff from the main package build to new reversioning functions.
- `kernel`:
- add some custom fields to `DEBIAN/control`:
- `Armbian-Kernel-Version:` / `Armbian-Kernel-Version-Family:` (for future use: cleanup of usage of `Source: ` field which should be removed)
- declutter the `Description:` field, moving long description out of the first line
- obtain `IMAGE_INSTALLED_KERNEL_VERSION` from the reversioned deb (this is still a hack and has not been fixed)
- `uboot`:
- declutter the `Description:` field, moving long description out of the first line
- use the reversioned .deb when deploying u-boot to the image
- `main_default_build_packages()` now stores reversioned values and complete paths to reversioned .deb's
- `list_installed_packages()` now compares custom field `Armbian-Original-Hash: `, and not the `Version:` to make sure debs in the image are the ones we want
- `install_artifact_deb_chroot()` is a new wrapper around `install_deb_chroot()` for easy handling of reversioned debs
- use it everywhere `install_deb_chroot()` was used in `distro-agnostic.sh` and `distro-specific.sh`
- change deployment dir to not include REVISION or ARCH
- get rid uboot's CHOSEN_UBOOT, REVISION and ARCH in the directory name.
- no two u-boot debs can be installed in the same machine anyway
