Change from "y" to "m"
Before
[ 2.423992] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 2.424718] rtc-hym8563 1-0051: registered as rtc0
[ 2.425770] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 2.425789] rtc-hym8563 1-0051: hctosys: unable to read the hardware clock
[ 3.817166] rk808-rtc rk808-rtc.5.auto: registered as rtc1
After
[ 3.790107] rk808-rtc rk808-rtc.5.auto: registered as rtc0
[ 3.801742] rk808-rtc rk808-rtc.5.auto: setting system clock to 2017-08-05T09:48:13 UTC (1501926493)
[ 3.919628] rtc-hym8563 1-0051: registered as rtc1
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
- fixes: unrecognized option '-Wl,--no-warn-rwx-segment'
- add a patch to atf that removes the unrecognized linker options
Signed-off-by: Martin Schmiedel <Martin.Schmiedel@tq-group.com>
Follow conventional `if-then-else-fi` constructions by not having `else` followed by semicolon. Hush is accepting, but other commonly used shells do not accept this.
- UUID boot does not seem to work on PocketBeagle 2.
- So specify the block device path instead.
- Also without rootwait, the boot will fail.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
This is tested on a tinkerboard 2s.
The u-boot dts for tb2 contains other fixes, and the major ones are:
- add missing basic gpio-fan node
- usb-c altmode fix, dts part
- similar to e9708b8c33, but for the Blade3
- this reverts d048673c00 just for the Blade3
- there is little to be gained from .10 anyway on those machines (IMHO)
- it is still vendor 2017.09 after all, dunno why Radxa calls them "2024.x"
- UMS mode (use the black USB port)
- Boot order: SD -> NVMe -> SATA -> USB -> eMMC
- Flash LEDs in preboot
- Networking stuff
- Lots of FS's and compression methods
* helios4: fix wake-on-lan (wol)
- added ethtool package
- enable wol on all ethernet interfaces
- support common systemd.net-naming-schemes (ethX/endX/enoX)
* Update helios4-wol.service
Removed test code.
* Update helios4-wol.service
Fix bug after retesting.
From the Kconfig:
```
Preload default EDID (Extended Display Identification Data)
branded by Linux Foundation that exposes display modes up
to 4k@30Hz, which have best compatibility with HDMI transmitters.
Enabling this option is recommended for a non-production use-cases.
It will make driver usable out-of-the-box.
For a higher display modes you will need to load customized EDID
from userspace using v4l2-ctl tool or by other means.
Without enabling this option driver will be practically
non-functional until EDID will be loaded from userspace.
Which is a wanted behavior when using this driver in a
commercial product that should utilize own branded EDID.
```
On v2025.01 and v2025.04 I get the following error
starting USB...
Bus usb@ff500000: dwc3_meson_gxl_get_phys: usb2 ports: 1
probe failed, error -114
No USB controllers found
So revert back to v2024.10 until sorted.
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
