JDM170/build
1
0
Fork 0
mirror of https://github.com/armbian/build synced 2025-09-24 19:47:06 +07:00
Code Issues Packages Projects Releases Wiki Activity

add new board armsom-sige3

Browse Source
This commit is contained in:
amazingfate
2024-09-09 20:30:06 +08:00
committed by Igor
parent 4a1e10219c
commit cbc7982846
4 changed files with 826 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

41
patch/u-boot/legacy/u-boot-radxa-rk35xx/board_armsom-sige3/add-u-boot-pd-negotiation-support.patch Normal file
View File

@@ -0,0 +1,41 @@
From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
From: amazingfate <liujianfeng1994@gmail.com>
Date: Thu, 2 May 2024 01:45:23 +0800
Subject: add u-boot pd negotiation support
---
drivers/power/power_delivery/tcpm.c | 4 ++--
include/configs/rk3588_common.h | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/power/power_delivery/tcpm.c b/drivers/power/power_delivery/tcpm.c
index 22334c6230c4..1b94a401836a 100644
--- a/drivers/power/power_delivery/tcpm.c
+++ b/drivers/power/power_delivery/tcpm.c
@@ -1390,8 +1390,8 @@ static void tcpm_pd_rx_handler(struct tcpm_port *port,
*/
if (!!(le16_to_cpu(msg->header) & PD_HEADER_DATA_ROLE) ==
(port->data_role == TYPEC_HOST)) {
- printf("Data role mismatch, initiating error recovery\n");
- tcpm_set_state(port, ERROR_RECOVERY, 0);
+ printf("Data role mismatch, hard resetting...\n");
+ tcpm_set_state(port, HARD_RESET_SEND, 0);
} else {
if (cnt)
tcpm_pd_data_request(port, msg);
diff --git a/include/configs/rk3568_common.h b/include/configs/rk3568_common.h
index 4ea4e964e..adb7b9617 100644
--- a/include/configs/rk3568_common.h
+++ b/include/configs/rk3568_common.h
@@ -69,7 +69,7 @@
#define CONFIG_SYS_SDRAM_BASE 0
#define SDRAM_MAX_SIZE 0xf0000000
-#define CONFIG_PREBOOT
+#define CONFIG_PREBOOT "charge_pd"
#define CONFIG_SYS_NONCACHED_MEMORY (1 << 20) /* 1 MiB */
--
Armbian

237
patch/u-boot/legacy/u-boot-radxa-rk35xx/defconfig/armsom-sige3-rk3568_defconfig Normal file
View File

@@ -0,0 +1,237 @@
CONFIG_ARM=y
CONFIG_ARCH_ROCKCHIP=y
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_SYS_MALLOC_F_LEN=0x80000
CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-rockchip/make_fit_atf.sh"
CONFIG_ROCKCHIP_RK3568=y
CONFIG_ROCKCHIP_FIT_IMAGE=y
CONFIG_ROCKCHIP_VENDOR_PARTITION=y
CONFIG_ROCKCHIP_FIT_IMAGE_PACK=y
CONFIG_ROCKCHIP_NEW_IDB=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
CONFIG_TARGET_EVB_RK3568=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEFAULT_DEVICE_TREE="rk3568-armsom-sige3"
CONFIG_DEBUG_UART=y
CONFIG_FIT=y
CONFIG_FIT_IMAGE_POST_PROCESS=y
CONFIG_FIT_HW_CRYPTO=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_IMAGE_POST_PROCESS=y
CONFIG_SPL_FIT_HW_CRYPTO=y
# CONFIG_SPL_SYS_DCACHE_OFF is not set
CONFIG_BOOTDELAY=0
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_ANDROID_BOOTLOADER=y
CONFIG_ANDROID_AVB=y
CONFIG_ANDROID_BOOT_IMAGE_HASH=y
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
CONFIG_SPL_SEPARATE_BSS=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SPL_SHA256_SUPPORT=y
CONFIG_SPL_CRYPTO_SUPPORT=y
CONFIG_SPL_HASH_SUPPORT=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_ATF=y
CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
CONFIG_SPL_AB=y
CONFIG_FASTBOOT_BUF_ADDR=0xc00800
CONFIG_FASTBOOT_BUF_SIZE=0x04000000
CONFIG_FASTBOOT_FLASH=y
CONFIG_FASTBOOT_FLASH_MMC_DEV=0
CONFIG_CMD_BOOTZ=y
CONFIG_CMD_DTIMG=y
# CONFIG_CMD_ELF is not set
# CONFIG_CMD_IMI is not set
# CONFIG_CMD_IMLS is not set
# CONFIG_CMD_XIMG is not set
# CONFIG_CMD_LZMADEC is not set
# CONFIG_CMD_UNZIP is not set
# CONFIG_CMD_FLASH is not set
# CONFIG_CMD_FPGA is not set
CONFIG_CMD_GPT=y
# CONFIG_CMD_LOADB is not set
# CONFIG_CMD_LOADS is not set
CONFIG_CMD_BOOT_ANDROID=y
CONFIG_CMD_BOOT_ROCKCHIP=y
CONFIG_CMD_MMC=y
CONFIG_CMD_MTD=y
CONFIG_CMD_NAND=y
CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
CONFIG_CMD_USB_MASS_STORAGE=y
# CONFIG_CMD_ITEST is not set
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_TFTPPUT=y
CONFIG_CMD_TFTP_BOOTM=y
CONFIG_CMD_TFTP_FLASH=y
# CONFIG_CMD_MISC is not set
CONFIG_CMD_MTD_BLK=y
# CONFIG_SPL_DOS_PARTITION is not set
# CONFIG_ISO_PARTITION is not set
CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
CONFIG_SPL_OF_CONTROL=y
CONFIG_SPL_DTB_MINIMUM=y
CONFIG_OF_LIVE=y
CONFIG_OF_SPL_REMOVE_PROPS=""
# CONFIG_NET_TFTP_VARS is not set
CONFIG_REGMAP=y
CONFIG_SPL_REGMAP=y
CONFIG_SYSCON=y
CONFIG_SPL_SYSCON=y
CONFIG_CLK=y
CONFIG_SPL_CLK=y
CONFIG_CLK_SCMI=y
CONFIG_DM_CRYPTO=y
CONFIG_SPL_DM_CRYPTO=y
CONFIG_ROCKCHIP_CRYPTO_V2=y
CONFIG_SPL_ROCKCHIP_CRYPTO_V2=y
CONFIG_DM_RNG=y
CONFIG_RNG_ROCKCHIP=y
CONFIG_SCMI_FIRMWARE=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_ROCKCHIP_GPIO_V2=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_I2C_MUX=y
CONFIG_DM_KEY=y
CONFIG_RK8XX_PWRKEY=y
CONFIG_ADC_KEY=y
CONFIG_MISC=y
CONFIG_SPL_MISC=y
CONFIG_ROCKCHIP_OTP=y
CONFIG_SPL_ROCKCHIP_SECURE_OTP=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_MTD=y
CONFIG_MTD_BLK=y
CONFIG_MTD_DEVICE=y
CONFIG_NAND=y
CONFIG_NAND_ROCKCHIP_V9=y
CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
CONFIG_SYS_NAND_U_BOOT_OFFS=0x8000
CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x10000
CONFIG_MTD_SPI_NAND=y
CONFIG_SPI_FLASH=y
CONFIG_SF_DEFAULT_SPEED=20000000
CONFIG_SPI_FLASH_EON=y
CONFIG_SPI_FLASH_GIGADEVICE=y
CONFIG_SPI_FLASH_MACRONIX=y
CONFIG_SPI_FLASH_WINBOND=y
CONFIG_SPI_FLASH_XMC=y
CONFIG_SPI_FLASH_MTD=y
CONFIG_DM_ETH=y
CONFIG_DM_ETH_PHY=y
CONFIG_DWC_ETH_QOS=y
CONFIG_GMAC_ROCKCHIP=y
CONFIG_NVME=y
CONFIG_PCI=y
CONFIG_DM_PCI=y
CONFIG_DM_PCI_COMPAT=y
CONFIG_PCIE_DW_ROCKCHIP=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
CONFIG_PHY_ROCKCHIP_NANENG_EDP=y
CONFIG_PHY_ROCKCHIP_SNPS_PCIE3=y
CONFIG_PINCTRL=y
CONFIG_SPL_PINCTRL=y
CONFIG_DM_FUEL_GAUGE=y
CONFIG_POWER_FG_RK817=y
CONFIG_IO_DOMAIN=y
CONFIG_ROCKCHIP_IO_DOMAIN=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_RK8XX=y
CONFIG_DM_POWER_DELIVERY=y
CONFIG_TYPEC_TCPM=y
CONFIG_TYPEC_TCPCI=y
CONFIG_TYPEC_HUSB311=y
CONFIG_TYPEC_FUSB302=y
CONFIG_REGULATOR_PWM=y
CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_REGULATOR_GPIO=y
CONFIG_REGULATOR_RK860X=y
CONFIG_REGULATOR_RK8XX=y
CONFIG_DM_CHARGE_DISPLAY=y
CONFIG_CHARGE_ANIMATION=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_RAM=y
CONFIG_SPL_RAM=y
CONFIG_TPL_RAM=y
CONFIG_DM_RAMDISK=y
CONFIG_RAMDISK_RO=y
CONFIG_DM_DMC=y
CONFIG_ROCKCHIP_DMC_FSP=y
CONFIG_ROCKCHIP_SDRAM_COMMON=y
CONFIG_ROCKCHIP_TPL_INIT_DRAM_TYPE=0
CONFIG_DM_RESET=y
CONFIG_SPL_DM_RESET=y
CONFIG_SPL_RESET_ROCKCHIP=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_BASE=0xFE660000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_ROCKCHIP_SFC=y
CONFIG_SYSRESET=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_DWC3=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GADGET=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_USB_STORAGE=y
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="Rockchip"
CONFIG_USB_GADGET_VENDOR_NUM=0x2207
CONFIG_USB_GADGET_PRODUCT_NUM=0x350a
CONFIG_USB_GADGET_DOWNLOAD=y
CONFIG_DM_VIDEO=y
CONFIG_DISPLAY=y
CONFIG_DRM_ROCKCHIP=y
CONFIG_DRM_ROCKCHIP_DW_HDMI=y
CONFIG_DRM_ROCKCHIP_INNO_MIPI_PHY=y
CONFIG_DRM_ROCKCHIP_INNO_VIDEO_COMBO_PHY=y
CONFIG_DRM_ROCKCHIP_DW_MIPI_DSI=y
CONFIG_DRM_ROCKCHIP_ANALOGIX_DP=y
CONFIG_DRM_ROCKCHIP_LVDS=y
CONFIG_DRM_ROCKCHIP_RGB=y
CONFIG_ROCKCHIP_CUBIC_LUT_SIZE=9
CONFIG_LCD=y
CONFIG_USE_TINY_PRINTF=y
CONFIG_SPL_TINY_MEMSET=y
CONFIG_RSA=y
CONFIG_SPL_RSA=y
CONFIG_RSA_N_SIZE=0x200
CONFIG_RSA_E_SIZE=0x10
CONFIG_RSA_C_SIZE=0x20
CONFIG_XBC=y
CONFIG_SHA512=y
CONFIG_LZ4=y
CONFIG_LZMA=y
CONFIG_SPL_GZIP=y
CONFIG_ERRNO_STR=y
# CONFIG_EFI_LOADER is not set
CONFIG_AVB_LIBAVB=y
CONFIG_AVB_LIBAVB_AB=y
CONFIG_AVB_LIBAVB_ATX=y
CONFIG_AVB_LIBAVB_USER=y
CONFIG_RK_AVB_LIBAVB_USER=y
CONFIG_OPTEE_CLIENT=y
CONFIG_OPTEE_V2=y
CONFIG_CMD_CHARGE_DISPLAY=y
CONFIG_DM_CHARGE_DISPLAY=y
CONFIG_CMD_PMIC=y
CONFIG_CMD_REGULATOR=y

537
patch/u-boot/legacy/u-boot-radxa-rk35xx/dt/rk3568-armsom-sige3.dts Normal file
View File

@@ -0,0 +1,537 @@
/*
* SPDX-License-Identifier: GPL-2.0+
*
* (C) Copyright 2020 Rockchip Electronics Co., Ltd
*/
/dts-v1/;
#include "rk3568.dtsi"
#include "rk3568-u-boot.dtsi"
#include <dt-bindings/input/input.h>
#include <dt-bindings/usb/pd.h>
/ {
model = "ArmSom Sige3";
compatible = "armsom,sige3", "rockchip,rk3568";
dc_12v: dc-12v {
u-boot,dm-pre-reloc;
compatible = "regulator-fixed";
regulator-name = "dc_12v";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <12000000>;
regulator-max-microvolt = <12000000>;
};
vcc5v0_sys: vcc5v0-sys {
u-boot,dm-pre-reloc;
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_12v>;
};
vcc3v3_sys: vcc3v3-sys {
u-boot,dm-pre-reloc;
compatible = "regulator-fixed";
regulator-name = "vcc3v3_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc5v0_sys>;
};
vcc3v3_pcie: gpio-regulator {
u-boot,dm-pre-reloc;
compatible = "regulator-fixed";
regulator-name = "vcc3v3_pcie";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
enable-active-high;
gpio = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
startup-delay-us = <5000>;
vin-supply = <&vcc5v0_sys>;
};
};
&crypto {
status = "okay";
};
&gmac1 {
u-boot,dm-pre-reloc;
phy-mode = "rgmii";
clock_in_out = "output";
snps,reset-gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
snps,reset-active-low;
/* Reset time is 20ms, 100ms for rtl8211f */
snps,reset-delays-us = <0 20000 100000>;
assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
assigned-clock-rates = <0>, <125000000>;
pinctrl-names = "default";
pinctrl-0 = <&gmac1m1_miim
&gmac1m1_tx_bus2
&gmac1m1_rx_bus2
&gmac1m1_rgmii_clk
&gmac1m1_rgmii_bus>;
tx_delay = <0x4f>;
rx_delay = <0x26>;
phy-handle = <&rgmii_phy1>;
status = "okay";
};
&gpio0 {
u-boot,dm-pre-reloc;
};
&gpio4 {
u-boot,dm-pre-reloc;
};
&grf {
u-boot,dm-pre-reloc;
status = "okay";
};
&i2c0 {
status = "okay";
u-boot,dm-pre-reloc;
clock-frequency = <100000>;
rk809: pmic@20 {
u-boot,dm-pre-reloc;
status = "okay";
compatible = "rockchip,rk809";
reg = <0x20>;
interrupt-parent = <&gpio0>;
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default", "pmic-sleep",
"pmic-power-off", "pmic-reset";
pinctrl-0 = <&pmic_int>;
pinctrl-1 = <&soc_slppin_slp>, <&rk817_slppin_slp>;
pinctrl-2 = <&soc_slppin_gpio>, <&rk817_slppin_pwrdn>;
pinctrl-3 = <&soc_slppin_gpio>, <&rk817_slppin_rst>;
rockchip,system-power-controller;
wakeup-source;
#clock-cells = <1>;
clock-output-names = "rk808-clkout1", "rk808-clkout2";
//fb-inner-reg-idxs = <2>;
/* 1: rst regs (default in codes), 0: rst the pmic */
pmic-reset-func = <0>;
/* not save the PMIC_POWER_EN register in uboot */
not-save-power-en = <1>;
vcc1-supply = <&vcc3v3_sys>;
vcc2-supply = <&vcc3v3_sys>;
vcc3-supply = <&vcc3v3_sys>;
vcc4-supply = <&vcc3v3_sys>;
vcc5-supply = <&vcc3v3_sys>;
vcc6-supply = <&vcc3v3_sys>;
vcc7-supply = <&vcc3v3_sys>;
vcc8-supply = <&vcc3v3_sys>;
vcc9-supply = <&vcc3v3_sys>;
pwrkey {
status = "okay";
u-boot,dm-pre-reloc;
};
pinctrl_rk8xx: pinctrl_rk8xx {
u-boot,dm-pre-reloc;
gpio-controller;
#gpio-cells = <2>;
rk817_slppin_null: rk817_slppin_null {
pins = "gpio_slp";
function = "pin_fun0";
u-boot,dm-pre-reloc;
};
rk817_slppin_slp: rk817_slppin_slp {
pins = "gpio_slp";
function = "pin_fun1";
u-boot,dm-pre-reloc;
};
rk817_slppin_pwrdn: rk817_slppin_pwrdn {
pins = "gpio_slp";
function = "pin_fun2";
u-boot,dm-pre-reloc;
};
rk817_slppin_rst: rk817_slppin_rst {
pins = "gpio_slp";
function = "pin_fun3";
u-boot,dm-pre-reloc;
};
};
regulators {
u-boot,dm-pre-reloc;
vdd_logic: DCDC_REG1 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_logic";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-on-in-suspend;
};
};
vdd_gpu: DCDC_REG2 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_gpu";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-on-in-suspend;
};
};
vcc_ddr: DCDC_REG3 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-initial-mode = <0x2>;
regulator-name = "vcc_ddr";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-on-in-suspend;
};
};
vdd_npu: DCDC_REG4 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <1350000>;
regulator-init-microvolt = <900000>;
regulator-ramp-delay = <6001>;
regulator-initial-mode = <0x2>;
regulator-name = "vdd_npu";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-on-in-suspend;
};
};
vdda0v9_image: LDO_REG1 {
u-boot,dm-pre-reloc;
regulator-boot-on;
regulator-always-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_image";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-off-in-suspend;
};
};
vdda_0v9: LDO_REG2 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda_0v9";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-off-in-suspend;
};
};
vdda0v9_pmu: LDO_REG3 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-name = "vdda0v9_pmu";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-on-in-suspend;
regulator-suspend-microvolt = <900000>;
};
};
vccio_acodec: LDO_REG4 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_acodec";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-off-in-suspend;
};
};
vccio_sd: LDO_REG5 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vccio_sd";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-off-in-suspend;
};
};
vcc3v3_pmu: LDO_REG6 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-name = "vcc3v3_pmu";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vcca_1v8: LDO_REG7 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca_1v8";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-off-in-suspend;
};
};
vcca1v8_pmu: LDO_REG8 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_pmu";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vcca1v8_image: LDO_REG9 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcca1v8_image";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-off-in-suspend;
};
};
vcc_1v8: DCDC_REG5 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-name = "vcc_1v8";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-off-in-suspend;
};
};
vcc_3v3: SWITCH_REG1 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc_3v3";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-off-in-suspend;
};
};
vcc3v3_sd: SWITCH_REG2 {
u-boot,dm-pre-reloc;
regulator-always-on;
regulator-boot-on;
regulator-name = "vcc3v3_sd";
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-off-in-suspend;
};
};
};
};
usbc: fusb302@22 {
u-boot,dm-pre-reloc;
compatible = "fcs,fusb302";
reg = <0x22>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PC3 IRQ_TYPE_LEVEL_LOW>;
int-n-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&usbc1_int>;
vbus-supply = <&vcc3v3_sys>;
status = "okay";
usb_con: connector {
u-boot,dm-pre-reloc;
compatible = "usb-c-connector";
label = "USB-C";
data-role = "dual";
power-role = "sink";
try-power-role = "sink";
op-sink-microwatt = <1000000>;
sink-pdos =
<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
};
};
vdd_cpu: rk8600@40 {
u-boot,dm-pre-reloc;
compatible = "rockchip,rk8600";
reg = <0x40>;
vin-supply = <&vcc5v0_sys>;
regulator-compatible = "rk860x-reg";
regulator-name = "vdd_cpu";
regulator-min-microvolt = <712500>;
regulator-max-microvolt = <1390000>;
regulator-init-microvolt = <900000>;
regulator-ramp-delay = <2300>;
fcs,suspend-voltage-selector = <1>;
regulator-boot-on;
regulator-always-on;
regulator-state-mem {
u-boot,dm-pre-reloc;
regulator-off-in-suspend;
};
};
};
&i2c0_xfer {
u-boot,dm-pre-reloc;
status = "okay";
};
&pcfg_pull_none_smt {
u-boot,dm-pre-reloc;
status = "okay";
};
&pcie30_phy_grf {
u-boot,dm-pre-reloc;
};
&pcie3x2 {
u-boot,dm-pre-reloc;
vpcie3v3-supply = <&vcc3v3_pcie>;
reset-gpios = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&pcie30phy {
u-boot,dm-pre-reloc;
status = "okay";
};
&pinctrl {
u-boot,dm-spl;
pmic {
u-boot,dm-pre-reloc;
pmic_int: pmic_int {
u-boot,dm-pre-reloc;
rockchip,pins =
<0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
};
soc_slppin_gpio: soc_slppin_gpio {
u-boot,dm-pre-reloc;
rockchip,pins =
<0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low_pull_down>;
};
soc_slppin_slp: soc_slppin_slp {
u-boot,dm-pre-reloc;
rockchip,pins =
<0 RK_PA2 RK_FUNC_1 &pcfg_pull_up>;
};
soc_slppin_rst: soc_slppin_rst {
u-boot,dm-pre-reloc;
rockchip,pins =
<0 RK_PA2 RK_FUNC_2 &pcfg_pull_none>;
};
};
usb {
u-boot,dm-pre-reloc;
usbc1_int: usbc1-int {
u-boot,dm-pre-reloc;
rockchip,pins = <0 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
};
&pmu_io_domains {
status = "okay";
pmuio2-supply = <&vcc3v3_pmu>;
vccio1-supply = <&vccio_acodec>;
vccio3-supply = <&vccio_sd>;
vccio4-supply = <&vcc_1v8>;
vccio5-supply = <&vcc_3v3>;
vccio6-supply = <&vcc_1v8>;
vccio7-supply = <&vcc_3v3>;
u-boot,dm-pre-reloc;
};
&pmucru {
u-boot,dm-pre-reloc;
status = "okay";
};
&pmugrf {
u-boot,dm-pre-reloc;
status = "okay";
};
&uart2 {
status = "okay";
};