Support Plymouth (#4133)

* Add plymouth-theme-armbian package

* Adjust all bootscripts to adapt plymouth

* Auto show logo accroding to BOOT_LOGO

* Enable plymouth detail mode when bootlogo=false

* Add a new board config var - HAS_VIDEO_OUTPUT

This var is used to indicate whether device has a HW video output.
If it's set to "no", we will disable kernel bootsplash, plymouth and BUILD_DESKTOP

* Rename package to be aligned with others

* Disable kernel bootloader, but keep the code for it

* Rather keep bootlogo in the kernel for a while, otherwise kernel upgrade will turn bootup into the darkness

Co-authored-by: Igor Pečovnik <igorpecovnik@users.noreply.github.com>
Co-authored-by: Igor <igor@armbian.com>

config/boards/bananapir2.csc

@@ -2,5 +2,5 @@
 BOARD_NAME="Banana Pi R2"
 BOARDFAMILY="mt7623"
 BOOTCONFIG="mt7623n_bpir2_defconfig"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy"

config/boards/clearfogbase.conf

@@ -3,5 +3,5 @@ BOARD_NAME="Clearfog Base"
 BOARDFAMILY="mvebu"
 BOOTCONFIG="clearfog_defconfig"
 #BOOTCONFIG_EDGE="clearfogbase_defconfig"  # This had to be disabled because the clearfog is not yet ready for mainline uboot
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"

config/boards/clearfogpro.conf

@@ -2,5 +2,5 @@
 BOARD_NAME="Clearfog Pro"
 BOARDFAMILY="mvebu"
 BOOTCONFIG="clearfog_defconfig"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"

config/boards/cubieboard.csc

@@ -2,6 +2,6 @@
 BOARD_NAME="Cubieboard 1"
 BOARDFAMILY="sun4i"
 BOOTCONFIG="Cubieboard_config"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"
 MODULES_BLACKLIST="ir_lirc_codec lirc_dev sunxi-cir"

config/boards/espressobin.conf

@@ -2,5 +2,5 @@
 BOARD_NAME="Espressobin"
 BOARDFAMILY="mvebu64"
 BOOTCONFIG="mvebu_espressobin-88f3720_defconfig"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="current,edge"

config/boards/fe-som-rk3399.eos

@@ -2,7 +2,7 @@
 BOARD_NAME="FE SOM RK3399"
 BOARDFAMILY="rk3399"
 BOOTCONFIG="nanopc-t4-rk3399_defconfig"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"
 ASOUND_STATE="asound.state.rt5651"
 BOOT_LOGO="desktop"

config/boards/helios4.conf

@@ -5,6 +5,6 @@ BOOTCONFIG="helios4_defconfig"
 BOOTCONFIG_NEXT="helios4_defconfig"
 MODULES_LEGACY="marvell_cesa lm75"
 MODULES_CURRENT="marvell_cesa lm75"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 FORCE_BOOTSCRIPT_UPDATE="yes"
 KERNEL_TARGET="legacy,current,edge"

config/boards/lime-a33.csc

@@ -1,7 +1,7 @@
 # Allwinner A33 quad core 1Gb SoC
 BOARD_NAME="A33 OLinuXino"
 BOARDFAMILY="sun8i"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 BOOTCONFIG="A33-OLinuXino_defconfig"
 OVERLAY_PREFIX="sun8i-a33"
 KERNEL_TARGET="legacy,current,edge"

config/boards/macchiatobin-doubleshot.csc

@@ -2,5 +2,5 @@
 BOARD_NAME="Macchiatobin DS"
 BOARDFAMILY="mvebu64"
 BOOTCONFIG="mvebu_mcbin-88f8040_defconfig"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"

config/boards/melea1000.csc

@@ -1,6 +1,6 @@
 # Allwinner A10 single core 1Gb SoC
 BOARD_NAME="Mele A1000"
 BOARDFAMILY="sun4i"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 BOOTCONFIG="Mele_A1000_defconfig"
 KERNEL_TARGET="current,edge"

config/boards/mk808c.csc

@@ -1,6 +1,6 @@
 # Allwinner A20 dual core 1Gb SoC
 BOARD_NAME="MK808C"
 BOARDFAMILY="sun7i"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 BOOTCONFIG="MK808C_defconfig"
 KERNEL_TARGET="legacy,current,edge"

config/boards/nanopi-r1.conf

@@ -7,5 +7,5 @@ MODULES_BLACKLIST="lima"
 DEFAULT_OVERLAYS="usbhost0 usbhost1 uart1"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS1,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"

config/boards/nanopi-r2c.conf

@@ -7,5 +7,5 @@ DEFAULT_CONSOLE="serial"
 MODULES="g_serial"
 MODULES_BLACKLIST="rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi gpu_sched lima hantro_vpu"
 SERIALCON="ttyS2:1500000,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 BOOT_FDT_FILE="rockchip/rk3328-nanopi-r2-rev06.dtb"

config/boards/nanopi-r2s.conf

@@ -7,5 +7,5 @@ DEFAULT_CONSOLE="serial"
 MODULES="g_serial"
 MODULES_BLACKLIST="rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi gpu_sched lima hantro_vpu"
 SERIALCON="ttyS2:1500000,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 BOOT_FDT_FILE="rockchip/rk3328-nanopi-r2-rev00.dtb"

config/boards/nanopi-r4s.conf

@@ -5,4 +5,4 @@ BOOTCONFIG="nanopi-r4s-rk3399_defconfig"
 KERNEL_TARGET="current,edge"
 DEFAULT_CONSOLE="serial"
 MODULES_BLACKLIST="rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi gpu_sched lima hantro_vpu panfrost"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"

config/boards/nanopiair.csc

@@ -7,5 +7,5 @@ MODULES_BLACKLIST="lima"
 DEFAULT_OVERLAYS="usbhost2 usbhost3"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"

config/boards/nanopiduo.csc

@@ -6,6 +6,6 @@ MODULES="g_serial"
 MODULES_BLACKLIST="lima"
 DEFAULT_OVERLAYS="usbhost2 usbhost3"
 DEFAULT_CONSOLE="serial"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 SERIALCON="ttyS0,ttyGS0"
 KERNEL_TARGET="current,edge"

config/boards/nanopiduo2.csc

@@ -6,6 +6,6 @@ MODULES="g_serial"
 MODULES_BLACKLIST="lima"
 DEFAULT_OVERLAYS="usbhost0 usbhost2 usbhost3"
 DEFAULT_CONSOLE="serial"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 SERIALCON="ttyS0,ttyGS0"
 KERNEL_TARGET="current,edge"

config/boards/nanopineo.conf

@@ -7,5 +7,5 @@ MODULES_BLACKLIST="lima"
 DEFAULT_OVERLAYS="usbhost1 usbhost2"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"

config/boards/nanopineo2.conf

@@ -7,5 +7,5 @@ MODULES_BLACKLIST="lima"
 DEFAULT_OVERLAYS="usbhost1 usbhost2"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"

config/boards/nanopineo2black.csc

@@ -7,5 +7,5 @@ MODULES_BLACKLIST="lima"
 DEFAULT_OVERLAYS="usbhost1 usbhost2"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS1,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"

config/boards/nanopineo3.csc

@@ -7,5 +7,5 @@ DEFAULT_CONSOLE="serial"
 MODULES="g_serial"
 MODULES_BLACKLIST="rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi gpu_sched lima"
 SERIALCON="ttyS2:1500000,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 BOOT_FDT_FILE="rockchip/rk3328-nanopi-neo3-rev02.dtb"

config/boards/nanopineocore2.csc

@@ -7,5 +7,5 @@ MODULES_BLACKLIST="lima"
 DEFAULT_OVERLAYS="usbhost1 usbhost2"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"

config/boards/nanopineoplus2.conf

@@ -7,5 +7,5 @@ MODULES_BLACKLIST="lima"
 DEFAULT_OVERLAYS="usbhost1 usbhost2"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"

config/boards/olimex-som-a20.eos

@@ -1,6 +1,6 @@
 # Allwinner A20 dual core 1Gb SoC
 BOARD_NAME="SOM-A20"
 BOARDFAMILY="sun7i"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 BOOTCONFIG="A20-Olimex-SOM-EVB_defconfig"
 KERNEL_TARGET="current,edge"

config/boards/olimex-som204-a20.eos

@@ -5,6 +5,6 @@ BOOTCONFIG="A20-Olimex-SOM204-EVB-eMMC_defconfig"
 MODULES_CURRENT="bonding g_serial gpio-ir-tx r8723bs"
 MODULES_EDGE="bonding g_serial gpio-ir-tx r8723bs "
 SERIALCON="ttyS0,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="current,edge"
 PACKAGE_LIST_DESKTOP_BOARD="xfce4-power-manager xinput-calibrator"

config/boards/olinux-som-a13.csc

@@ -1,6 +1,6 @@
 # Allwinner A13 single core 512Mb SoM
 BOARD_NAME="Olimex A13 SOM"
 BOARDFAMILY="sun5i"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 BOOTCONFIG="A13-OLinuXino_defconfig"
 KERNEL_TARGET="current,edge"

config/boards/orangepi-r1.conf

@@ -5,7 +5,7 @@ BOOTCONFIG="orangepi_r1_defconfig"
 DEFAULT_OVERLAYS="usbhost2 usbhost3"
 MODULES="g_serial"
 MODULES_BLACKLIST="lima sunxi_cedrus"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0,ttyGS0"
 KERNEL_TARGET="current,edge"

config/boards/orangepi-r1plus-lts.conf

@@ -7,5 +7,5 @@ DEFAULT_CONSOLE="serial"
 MODULES="g_serial"
 MODULES_BLACKLIST="rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi gpu_sched lima hantro_vpu"
 SERIALCON="ttyS2:1500000,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 BOOT_FDT_FILE="rockchip/rk3328-orangepi-r1-plus-lts.dtb"

config/boards/orangepi-r1plus.csc

@@ -7,4 +7,4 @@ DEFAULT_CONSOLE="serial"
 MODULES="g_serial"
 MODULES_BLACKLIST="rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi gpu_sched lima hantro_vpu"
 SERIALCON="ttyS2:1500000,ttyGS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"

config/boards/orangepizero.conf

@@ -6,6 +6,6 @@ MODULES_CURRENT="g_serial"
 MODULES_BLACKLIST="lima sunxi_cedrus"
 DEFAULT_OVERLAYS="usbhost2 usbhost3"
 DEFAULT_CONSOLE="serial"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 SERIALCON="ttyS0,ttyGS0"
 KERNEL_TARGET="legacy,current,edge"

config/boards/orangepizero2.conf

@@ -5,7 +5,7 @@ BOOTCONFIG="orangepi_zero2_defconfig"
 MODULES_LEGACY="uwe5622_bsp_sdio sprdbt_tty sprdwl_ng"
 MODULES_BLACKLIST="lima"
 DEFAULT_CONSOLE="serial"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 SERIALCON="ttyS0"
 KERNEL_TARGET="legacy,current,edge"
 PACKAGE_LIST_BOARD="rfkill bluetooth bluez bluez-tools"

config/boards/orangepizeroplus.conf

@@ -7,5 +7,5 @@ MODULES="g_serial"
 MODULES_BLACKLIST="lima"
 SERIALCON="ttyS0,ttyGS0"
 DEFAULT_OVERLAYS="usbhost2 usbhost3"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="legacy,current,edge"

config/boards/orangepizeroplus2-h5.csc

@@ -5,6 +5,6 @@ BOOTCONFIG="orangepi_zero_plus2_defconfig"
 MODULES_LEGACY="g_serial"
 MODULES_CURRENT="g_serial"
 DEFAULT_OVERLAYS="gpio-regulator-1.3v usbhost2 usbhost3"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 SERIALCON="ttyS0,ttyGS0"
 KERNEL_TARGET="legacy,current,edge"

config/boards/pinecube.csc

@@ -3,4 +3,4 @@ BOARD_NAME="Pine Cube"
 BOARDFAMILY="sun8i-v3s"
 KERNEL_TARGET="current,edge"
 BOOTCONFIG="pinecube_defconfig"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"

config/boards/rockpi-e.csc

@@ -5,4 +5,4 @@ BOOTCONFIG="rock-pi-e-rk3328_defconfig"
 KERNEL_TARGET="legacy,current,edge"
 DEFAULT_CONSOLE="serial"
 MODULES_BLACKLIST="rockchipdrm analogix_dp dw_mipi_dsi dw_hdmi gpu_sched lima"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"

config/boards/zeropi.conf

@@ -6,5 +6,5 @@ DEFAULT_OVERLAYS="usbhost1 usbhost2"
 MODULES_BLACKLIST="lima"
 DEFAULT_CONSOLE="serial"
 SERIALCON="ttyS0"
-BUILD_DESKTOP="no"
+HAS_VIDEO_OUTPUT="no"
 KERNEL_TARGET="current,edge"

config/bootscripts/boot-cubox.cmd

@@ -25,7 +25,11 @@ fi
 if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
 if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "${consoleargs} console=${cons}"; fi
 if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
-if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+	setenv consoleargs "splash=verbose ${consoleargs}"
+fi
 
 setenv bootargs "root=${rootdev} rootfstype=${rootfstype} rootwait ${consoleargs} consoleblank=0 video=mxcfb0:dev=hdmi,${disp_mode},if=RGB24,bpp=32 coherent_pool=2M cma=256M@2G rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi vt.global_cursor_default=0 loglevel=${verbosity} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
 load ${devtype} ${devnum}:${distro_bootpart} ${fdt_addr_r} ${prefix}dtb/${fdtfile}

config/bootscripts/boot-meson64.cmd

@@ -111,7 +111,11 @@ if test -e ${devtype} ${devnum} ${prefix}zImage; then
 	if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
 	if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
 	if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
-	if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+	if test "${bootlogo}" = "true"; then
+		setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+	else
+		setenv consoleargs "splash=verbose ${consoleargs}"
+	fi
 
 	setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 coherent_pool=2M loglevel=${verbosity} ${amlogic} no_console_suspend fsck.repair=yes net.ifnames=0 elevator=noop hdmimode=${hdmimode} cvbsmode=576cvbs max_freq_a55=${max_freq_a55} maxcpus=${maxcpus} voutmode=${voutmode} ${cmode} disablehpd=${disablehpd} cvbscable=${cvbscable} overscan=${overscan} ${hid_quirks} monitor_onoff=${monitor_onoff} ${cec_enable} sdrmode=${sdrmode}"
 	echo "Legacy bootargs: ${bootargs}"
@@ -128,7 +132,11 @@ else
 	if test "${console}" = "serial"; then setenv consoleargs "console=ttyAML0,115200"; fi
 	if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyAML0,115200 console=tty1"; fi
 	if test "${console}" = "serial"; then setenv consoleargs "console=ttyAML0,115200"; fi
-	if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+	if test "${bootlogo}" = "true"; then
+		setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+	else
+		setenv consoleargs "splash=verbose ${consoleargs}"
+	fi
 	if test "${disable_vu7}" = "false"; then setenv usbhidquirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
 
 	setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 coherent_pool=2M loglevel=${verbosity} ubootpart=${partuuid} libata.force=noncq usb-storage.quirks=${usbstoragequirks} ${usbhidquirks} ${extraargs} ${extraboardargs}"

config/bootscripts/boot-odroid-c2.ini

@@ -158,7 +158,7 @@ if test -e mmc 0:1 boot/.next; then setenv condev "console=ttyAML0,115200n8"; el
 ###########################################
 setenv verbosity "1"
 
-if test "${bootlogo}" = "true"; then setenv bootsplash "bootsplash.bootfile=bootsplash.armbian"; fi
+if test "${bootlogo}" = "true"; then setenv bootsplash "splash plymouth.ignore-serial-consoles"; fi
 
 # Boot arguments
 setenv bootargs "root=${rootdev} rootwait rootflags=data=writeback rw rootfstype=${rootfstype} ${condev} no_console_suspend consoleblank=0 hdmimode=${m} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes loglevel=${verbosity} ${bootsplash} net.ifnames=0 ${extraargs}"

config/bootscripts/boot-odroid-n2.ini

@@ -103,7 +103,7 @@ setenv maxcpus "6"
 
 ### Normal HDMI Monitors
 if test "${display_autodetect}" = "true"; then hdmitx edid; fi
-if test "${bootlogo}" = "true"; then setenv bootsplash "bootsplash.bootfile=bootsplash.armbian"; fi
+if test "${bootlogo}" = "true"; then setenv bootsplash "splash plymouth.ignore-serial-consoles"; fi
 if test "${hdmimode}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
 
 # Read armbianEnv.txt

config/bootscripts/boot-odroid-xu4.ini

@@ -24,7 +24,11 @@ if ext4load mmc 0:1 0x44000000 /boot/armbianEnv.txt || fatload mmc 0:1 0x4400000
 
 if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
 if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttySAC2,115200n8 ${consoleargs}"; fi
-if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+    setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+    setenv consoleargs "splash=verbose ${consoleargs}"
+fi
 
 setenv bootrootfs "${consoleargs} consoleblank=0 loglevel=${verbosity} root=${rootdev} rootfstype=${rootfstype} rootwait rw"
 

config/bootscripts/boot-qemu.cmd

@@ -27,7 +27,11 @@ fi
 if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyAMA0 console=tty1"; fi
 if test "${console}" = "serial"; then setenv consoleargs "console=ttyAMA0"; fi
 if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
-if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+	setenv consoleargs "splash=verbose ${consoleargs}"
+fi
 
 setenv bootargs "root=${rootdev} rw rootdelay=5 rootwait rootfstype=${rootfstype} ${consoleargs} loglevel=7 apparmor=0 nousb selinux=0 ${extraargs} ${extraboardargs}"
 load ${devtype} ${devnum} ${ramdisk_addr_r} ${prefix}uInitrd

config/bootscripts/boot-rk322x.cmd

@@ -34,7 +34,11 @@ if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
 
 # get PARTUUID of first partition on SD/eMMC the boot script was loaded from
 if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:1 partuuid; fi
-if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+	setenv consoleargs "splash=verbose ${consoleargs}"
+fi
 
 setenv bootargs "earlyprintk root=${rootdev} console=ttyS2,115200n8 console=tty1 rootwait rootfstype=${rootfstype} ${consoleargs} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
 

config/bootscripts/boot-rockchip.cmd

@@ -29,7 +29,11 @@ if test "${console}" = "ttyS2,115200n8"; then setenv console "both"; fi
 if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
 if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyS2,115200n8 ${consoleargs}"; fi
 if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
-if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+	setenv consoleargs "splash=verbose ${consoleargs}"
+fi
 
 # get PARTUUID of first partition on SD/eMMC the boot script was loaded from
 if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:1 partuuid; fi

config/bootscripts/boot-rockchip64.cmd

@@ -26,7 +26,11 @@ if test "${logo}" = "disabled"; then setenv logo "logo.nologo"; fi
 if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=tty1"; fi
 if test "${console}" = "serial" || test "${console}" = "both"; then setenv consoleargs "console=ttyS2,1500000 ${consoleargs}"; fi
 if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
-if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+	setenv consoleargs "splash=verbose ${consoleargs}"
+fi
 
 # get PARTUUID of first partition on SD/eMMC the boot script was loaded from
 if test "${devtype}" = "mmc"; then part uuid mmc ${devnum}:1 partuuid; fi

config/bootscripts/boot-s5p6818.cmd

@@ -23,7 +23,11 @@ if ext4load mmc ${devnum}:1 ${kernel_addr_r} ${prefix}/armbianEnv.txt; then
 	env import -t ${kernel_addr_r} ${filesize}
 fi
 
-if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+	setenv consoleargs "splash=verbose ${consoleargs}"
+fi
 
 setenv bootargs "console=ttySAC0,115200n8 console=tty1 ${consoleargs}  root=${rootdev} rootwait rootfstype=${rootfstype} loglevel=${verbosity} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
 

config/bootscripts/boot-sun50i-next.cmd

@@ -27,7 +27,11 @@ fi
 
 if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
 if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
-if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+	setenv consoleargs "splash=verbose ${consoleargs}"
+fi
 
 # get PARTUUID of first partition on SD/eMMC it was loaded from
 # mmc 0 is always mapped to device u-boot (2016.09+) was loaded from

config/bootscripts/boot-sun50iw9.cmd

@@ -26,7 +26,11 @@ fi
 
 if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
 if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
-if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+	setenv consoleargs "splash=verbose ${consoleargs}"
+fi
 
 # get PARTUUID of first partition on SD/eMMC it was loaded from
 # mmc 0 is always mapped to device u-boot (2016.09+) was loaded from

config/bootscripts/boot-sunxi.cmd

@@ -40,7 +40,11 @@ fi
 if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttyS0,115200 console=tty1"; fi
 if test "${console}" = "serial"; then setenv consoleargs "console=ttyS0,115200"; fi
 if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
-if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+	setenv consoleargs "splash=verbose ${consoleargs}"
+fi
 
 setenv bootargs "root=${rootdev} rootwait rootfstype=${rootfstype} ${consoleargs} hdmi.audio=EDID:0 disp.screen0_output_mode=${disp_mode} consoleblank=0 loglevel=${verbosity} ubootpart=${partuuid} ubootsource=${devtype} usb-storage.quirks=${usbstoragequirks} ${extraargs} ${extraboardargs}"
 

config/bootscripts/boot-udoo.cmd

@@ -25,7 +25,11 @@ fi
 if test "${console}" = "display" || test "${console}" = "both"; then setenv consoleargs "console=ttymxc1,115200 console=tty1"; fi
 if test "${console}" = "serial"; then setenv consoleargs "console=ttymxc1,115200"; fi
 if test "${earlycon}" = "on"; then setenv consoleargs "earlycon ${consoleargs}"; fi
-if test "${bootlogo}" = "true"; then setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"; fi
+if test "${bootlogo}" = "true"; then
+	setenv consoleargs "splash plymouth.ignore-serial-consoles ${consoleargs}"
+else
+	setenv consoleargs "splash=verbose ${consoleargs}"
+fi
 
 setenv bootargs "root=${rootdev} rootfstype=${rootfstype} rootwait ${consoleargs} video=mxcfb0:dev=hdmi,${disp_mode},if=RGB24,bpp=32 rd.dm=0 rd.luks=0 rd.lvm=0 raid=noautodetect pci=nomsi ahci_imx.hotplug=1 vt.global_cursor_default=0 loglevel=${verbosity} usb-storage.quirks=${usbstoragequirks} ${extraargs}"
 run findfdt

config/sources/families/include/meson_common.inc

@@ -31,20 +31,22 @@ case $BRANCH in
 
 		KERNELBRANCH="branch:linux-5.10.y"
 		KERNELPATCHDIR='meson-'$BRANCH
-        ;;
+
+    ;;
 
 	current)
 
 		KERNELBRANCH="branch:linux-5.15.y"
 		KERNELPATCHDIR='meson-'$BRANCH
 
-	;;
+	  ;;
+
 	edge)
 
 		KERNELBRANCH="branch:linux-5.18.y"
 		KERNELPATCHDIR='meson-'$BRANCH
 
-	;;
+	  ;;
 esac
 
 write_uboot_platform()

lib/compilation-prepare.sh

@@ -117,13 +117,13 @@ compilation_prepare()
 	fi
 
 	#
-	# Linux splash file
+	# Linux splash file (legacy)
 	#
 
-	# disable it.
+	# since plymouth introduction, boot scripts are not supporting this method anymore.
-	# todo: cleanup logo generation code and bring in plymouth
+	# In order to enable it, you need to use this: setenv consoleargs "bootsplash.bootfile=bootsplash.armbian ${consoleargs}"
 
-	if linux-version compare "${version}" ge 5.15 && [ $SKIP_BOOTSPLASH != yes ]; then
+	if linux-version compare "${version}" ge 5.15 && [ "${SKIP_BOOTSPLASH}" != yes ]; then
 
 		display_alert "Adding" "Kernel splash file" "info"
 

lib/compilation.sh

@@ -773,6 +773,62 @@ compile_armbian-config()
 
 
 
+compile_plymouth-theme-armbian()
+{
+
+	local tmp_dir work_dir
+	tmp_dir=$(mktemp -d)
+	chmod 700 ${tmp_dir}
+	trap "ret=\$?; rm -rf \"${tmp_dir}\" ; exit \$ret" 0 1 2 3 15
+	plymouth_theme_armbian_dir=armbian-plymouth-theme_${REVISION}_all
+	display_alert "Building deb" "armbian-plymouth-theme" "info"
+
+	mkdir -p "${tmp_dir}/${plymouth_theme_armbian_dir}"/{DEBIAN,usr/share/plymouth/themes/armbian}
+
+	# set up control file
+	cat <<-END > "${tmp_dir}/${plymouth_theme_armbian_dir}"/DEBIAN/control
+	Package: armbian-plymouth-theme
+	Version: $REVISION
+	Architecture: all
+	Maintainer: $MAINTAINER <$MAINTAINERMAIL>
+	Depends: plymouth, plymouth-themes
+	Section: universe/x11
+	Priority: optional
+	Description: boot animation, logger and I/O multiplexer - armbian theme
+	END
+
+	cp "${SRC}"/packages/plymouth-theme-armbian/debian/{postinst,prerm,postrm} \
+		"${tmp_dir}/${plymouth_theme_armbian_dir}"/DEBIAN/
+	chmod 755 "${tmp_dir}/${plymouth_theme_armbian_dir}"/DEBIAN/{postinst,prerm,postrm}
+
+	convert -resize 256x256 \
+		"${SRC}"/packages/plymouth-theme-armbian/armbian-logo.png \
+		"${tmp_dir}/${plymouth_theme_armbian_dir}"/usr/share/plymouth/themes/armbian/bgrt-fallback.png
+
+	# convert -resize 52x52 \
+	# 	"${SRC}"/packages/plymouth-theme-armbian/spinner.gif \
+	# 	"${tmp_dir}/${plymouth_theme_armbian_dir}"/usr/share/plymouth/themes/armbian/animation-%04d.png
+
+	convert -resize 52x52 \
+		"${SRC}"/packages/plymouth-theme-armbian/spinner.gif \
+		"${tmp_dir}/${plymouth_theme_armbian_dir}"/usr/share/plymouth/themes/armbian/throbber-%04d.png
+
+	cp "${SRC}"/packages/plymouth-theme-armbian/watermark.png \
+		"${tmp_dir}/${plymouth_theme_armbian_dir}"/usr/share/plymouth/themes/armbian/
+
+	cp "${SRC}"/packages/plymouth-theme-armbian/{bullet,capslock,entry,keyboard,keymap-render,lock}.png \
+		"${tmp_dir}/${plymouth_theme_armbian_dir}"/usr/share/plymouth/themes/armbian/
+
+	cp "${SRC}"/packages/plymouth-theme-armbian/armbian.plymouth \
+		"${tmp_dir}/${plymouth_theme_armbian_dir}"/usr/share/plymouth/themes/armbian/
+
+	fakeroot dpkg-deb -b -Z${DEB_COMPRESS} "${tmp_dir}/${plymouth_theme_armbian_dir}" >/dev/null
+	rsync --remove-source-files -rq "${tmp_dir}/${plymouth_theme_armbian_dir}.deb" "${DEB_STORAGE}/"
+	rm -rf "${tmp_dir}"
+}
+
+
+
 
 compile_xilinx_bootgen()
 {

lib/configuration.sh

@@ -159,6 +159,7 @@ ATF_COMPILE=yes
 [[ -z $WIREGUARD ]] && WIREGUARD="yes"
 [[ -z $EXTRAWIFI ]] && EXTRAWIFI="yes"
 [[ -z $SKIP_BOOTSPLASH ]] && SKIP_BOOTSPLASH="no"
+[[ -z $PLYMOUTH ]] && PLYMOUTH="yes"
 [[ -z $AUFS ]] && AUFS="yes"
 [[ -z $IMAGE_PARTITION_TABLE ]] && IMAGE_PARTITION_TABLE="msdos"
 [[ -z $EXTRA_BSP_NAME ]] && EXTRA_BSP_NAME=""
@@ -179,6 +180,12 @@ fi
 # load architecture defaults
 source "${SRC}/config/sources/${ARCH}.conf"
 
+if [[ "$HAS_VIDEO_OUTPUT" == "no" ]]; then
+	SKIP_BOOTSPLASH="yes"
+	PLYMOUTH="no"
+	[[ $BUILD_DESKTOP != "no" ]] && exit_with_error "HAS_VIDEO_OUTPUT is set to no. So we shouldn't build desktop environment"
+fi
+
 ## Extensions: at this point we've sourced all the config files that will be used,
 ##             and (hopefully) not yet invoked any extension methods. So this is the perfect
 ##             place to initialize the extension manager. It will create functions

lib/distributions.sh

@@ -396,6 +396,15 @@ POST_INSTALL_KERNEL_DEBS
 		fi
 	fi
 
+	# install plymouth-theme-armbian
+	if [[ $PLYMOUTH == yes ]]; then
+		if [[ "${REPOSITORY_INSTALL}" != *plymouth-theme-armbian* ]]; then
+			install_deb_chroot "${DEB_STORAGE}/armbian-plymouth-theme_${REVISION}_all.deb"
+		else
+			install_deb_chroot "armbian-plymouth-theme" "remote"
+		fi
+	fi
+
 	# install kernel sources
 	if [[ -f ${DEB_STORAGE}/${CHOSEN_KSRC}_${REVISION}_all.deb && $INSTALL_KSRC == yes ]]; then
 		install_deb_chroot "${DEB_STORAGE}/${CHOSEN_KSRC}_${REVISION}_all.deb"
@@ -592,6 +601,18 @@ FAMILY_TWEAKS
 	# build logo in any case
 	boot_logo
 
+	# Show logo
+	if [[ $PLYMOUTH == yes ]]; then
+		if [[ $BOOT_LOGO == yes || $BOOT_LOGO == desktop && $BUILD_DESKTOP == yes ]]; then
+			[[ -f "${SDCARD}"/boot/armbianEnv.txt ]] && grep -q '^bootlogo' "${SDCARD}"/boot/armbianEnv.txt \
+				&& sed -i 's/^bootlogo.*/bootlogo=true/' "${SDCARD}"/boot/armbianEnv.txt \
+				|| echo 'bootlogo=true' >> "${SDCARD}"/boot/armbianEnv.txt
+
+			[[ -f "${SDCARD}"/boot/boot.ini ]] \
+				&& sed -i 's/^setenv bootlogo.*/setenv bootlogo "true"/' "${SDCARD}"/boot/boot.ini
+		fi
+	fi
+
 	# disable MOTD for first boot - we want as clean 1st run as possible
 	chmod -x "${SDCARD}"/etc/update-motd.d/*
 

lib/general.sh

@@ -56,6 +56,7 @@ cleaning()
 			find "${DEB_STORAGE}" -name "${CHOSEN_UBOOT}_*.deb" -delete
 			find "${DEB_STORAGE}" \( -name "${CHOSEN_KERNEL}_*.deb" -o \
 				-name "armbian-*.deb" -o \
+				-name "plymouth-theme-armbian_*.deb" -o \
 				-name "${CHOSEN_KERNEL/image/dtb}_*.deb" -o \
 				-name "${CHOSEN_KERNEL/image/headers}_*.deb" -o \
 				-name "${CHOSEN_KERNEL/image/source}_*.deb" -o \

lib/main.sh

@@ -322,9 +322,9 @@ if [[ $KERNEL_ONLY != yes && -z $RELEASE ]]; then
 fi
 
 # don't show desktop option if we choose minimal build
-[[ $BUILD_MINIMAL == yes ]] && BUILD_DESKTOP=no
+if [[ $HAS_VIDEO_OUTPUT == no || $BUILD_MINIMAL == yes ]]; then
-
+	BUILD_DESKTOP=no
-if [[ $KERNEL_ONLY != yes && -z $BUILD_DESKTOP ]]; then
+elif [[ $KERNEL_ONLY != yes && -z $BUILD_DESKTOP ]]; then
 
 	# read distribution support status which is written to the armbian-release file
 	set_distribution_status
@@ -504,6 +504,13 @@ if [[ ! -f ${DEB_STORAGE}/armbian-zsh_${REVISION}_all.deb ]]; then
 
 fi
 
+# Compile plymouth-theme-armbian if packed .deb does not exist or use the one from repository
+if [[ ! -f ${DEB_STORAGE}/plymouth-theme-armbian_${REVISION}_all.deb ]]; then
+
+        [[ "${REPOSITORY_INSTALL}" != *plymouth-theme-armbian* ]] && compile_plymouth-theme-armbian
+
+fi
+
 # Compile armbian-firmware if packed .deb does not exist or use the one from repository
 if ! ls "${DEB_STORAGE}/armbian-firmware_${REVISION}_all.deb" 1> /dev/null 2>&1 || ! ls "${DEB_STORAGE}/armbian-firmware-full_${REVISION}_all.deb" 1> /dev/null 2>&1; then
 

packages/bsp/common/usr/share/initramfs-tools/conf-hooks.d/armbian-plymouth

@@ -0,0 +1,3 @@
+if which plymouth >/dev/null 2>&1; then
+    FRAMEBUFFER=y
+fi

packages/plymouth-theme-armbian/armbian.plymouth

@@ -0,0 +1,64 @@
+[Plymouth Theme]
+Name=Armbian
+Description=Armbian logo
+ModuleName=two-step
+
+[two-step]
+Font=DejaVu Sans 15
+TitleFont=DejaVu Sans Mono Bold 30
+ImageDir=/usr/share/plymouth/themes/armbian
+DialogHorizontalAlignment=.5
+DialogVerticalAlignment=.7
+TitleHorizontalAlignment=.5
+TitleVerticalAlignment=.382
+HorizontalAlignment=.5
+VerticalAlignment=.7
+WatermarkHorizontalAlignment=.5
+WatermarkVerticalAlignment=.89
+Transition=none
+TransitionDuration=0.0
+BackgroundStartColor=0x000000
+BackgroundEndColor=0x000000
+ProgressBarBackgroundColor=0x606060
+ProgressBarForegroundColor=0xffffff
+DialogClearsFirmwareBackground=false
+MessageBelowAnimation=true
+
+[boot-up]
+UseEndAnimation=false
+UseFirmwareBackground=true
+
+[shutdown]
+UseEndAnimation=false
+UseFirmwareBackground=true
+
+[reboot]
+UseEndAnimation=false
+UseFirmwareBackground=true
+
+[updates]
+SuppressMessages=true
+ProgressBarShowPercentComplete=true
+UseProgressBar=true
+Title=Installing Updates...
+_Title=Installing Updates...
+SubTitle=Do not turn off your computer
+_SubTitle=Do not turn off your computer
+
+[system-upgrade]
+SuppressMessages=true
+ProgressBarShowPercentComplete=true
+UseProgressBar=true
+Title=Upgrading System...
+_Title=Upgrading System...
+SubTitle=Do not turn off your computer
+_SubTitle=Do not turn off your computer
+
+[firmware-upgrade]
+SuppressMessages=true
+ProgressBarShowPercentComplete=true
+UseProgressBar=true
+Title=Upgrading Firmware...
+_Title=Upgrading Firmware...
+SubTitle=Do not turn off your computer
+_SubTitle=Do not turn off your computer

packages/plymouth-theme-armbian/debian/postinst

@@ -0,0 +1,17 @@
+#!/bin/sh -e
+
+if [ "x$1" = xconfigure ]; then
+	if which plymouth-set-default-theme >/dev/null 2>&1; then
+		# For Debian
+		plymouth-set-default-theme armbian
+	else
+		# For Ubuntu
+		update-alternatives \
+			--install /usr/share/plymouth/themes/default.plymouth default.plymouth \
+			/usr/share/plymouth/themes/armbian/armbian.plymouth 150
+	fi
+
+	if which update-initramfs >/dev/null 2>&1; then
+		update-initramfs -u
+	fi
+fi

packages/plymouth-theme-armbian/debian/postrm

@@ -0,0 +1,7 @@
+#!/bin/sh -e
+
+if [ "x$1" = xremove ]; then
+	if which update-initramfs >/dev/null 2>&1; then
+		update-initramfs -u
+	fi
+fi

packages/plymouth-theme-armbian/debian/prerm

@@ -0,0 +1,13 @@
+#!/bin/sh -e
+
+if [ "x$1" = xremove ]; then
+	if which plymouth-set-default-theme >/dev/null 2>&1; then
+		# For Debian
+		plymouth-set-default-theme -r
+	else
+		# For Ubuntu
+		update-alternatives \
+			--remove default.plymouth \
+			/usr/share/plymouth/themes/armbian/armbian.plymouth
+	fi
+fi