LibreELEC.tv/projects/Rockchip/patches/u-boot/rockchip-0046-phy-rockchip-naneng-combphy-Add-support-for-RK3576.patch

From cd325d4d441c7d4ee44b157b45f14f12b2f814df Mon Sep 17 00:00:00 2001
From: Jon Lin <jon.lin@rock-chips.com>
Date: Fri, 11 Jul 2025 22:44:35 +0000
Subject: [PATCH 46/84] phy: rockchip: naneng-combphy: Add support for RK3576

Add support for the PCIe/USB3/SATA combo PHYs used in the RK3576 SoC.

Config values are taken from vendor U-Boot linux-6.1-stan-rkr5 tag.

Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
---
 .../rockchip/phy-rockchip-naneng-combphy.c    | 147 ++++++++++++++++++
 1 file changed, 147 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index 432a8f8e03a..82353ae7678 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -494,6 +494,149 @@ static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = {
 	.combphy_cfg	= rk3568_combphy_cfg,
 };
 
+static int rk3576_combphy_cfg(struct rockchip_combphy_priv *priv)
+{
+	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+	u32 val;
+
+	switch (priv->mode) {
+	case PHY_TYPE_PCIE:
+		param_write(priv->phy_grf, &cfg->con0_for_pcie, true);
+		param_write(priv->phy_grf, &cfg->con1_for_pcie, true);
+		param_write(priv->phy_grf, &cfg->con2_for_pcie, true);
+		param_write(priv->phy_grf, &cfg->con3_for_pcie, true);
+		break;
+	case PHY_TYPE_USB3:
+		/* Set SSC downward spread spectrum */
+		val = readl(priv->mmio + (0x1f << 2));
+		val &= ~GENMASK(5, 4);
+		val |= 0x01 << 4;
+		writel(val, priv->mmio + 0x7c);
+
+		/* Enable adaptive CTLE for USB3.0 Rx */
+		val = readl(priv->mmio + (0x0e << 2));
+		val &= ~GENMASK(0, 0);
+		val |= 0x01;
+		writel(val, priv->mmio + (0x0e << 2));
+
+		/* Set PLL KVCO fine tuning signals */
+		val = readl(priv->mmio + (0x20 << 2));
+		val &= ~(0x7 << 2);
+		val |= 0x2 << 2;
+		writel(val, priv->mmio + (0x20 << 2));
+
+		/* Set PLL LPF R1 to su_trim[10:7]=1001 */
+		writel(0x4, priv->mmio + (0xb << 2));
+
+		/* Set PLL input clock divider 1/2 */
+		val = readl(priv->mmio + (0x5 << 2));
+		val &= ~(0x3 << 6);
+		val |= 0x1 << 6;
+		writel(val, priv->mmio + (0x5 << 2));
+
+		/* Set PLL loop divider */
+		writel(0x32, priv->mmio + (0x11 << 2));
+
+		/* Set PLL KVCO to min and set PLL charge pump current to max */
+		writel(0xf0, priv->mmio + (0xa << 2));
+
+		/* Set Rx squelch input filler bandwidth */
+		writel(0x0d, priv->mmio + (0x14 << 2));
+
+		param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
+		param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false);
+		param_write(priv->phy_grf, &cfg->usb_mode_set, true);
+		param_write(priv->pipe_grf, &cfg->u3otg1_port_en, true);
+		break;
+	case PHY_TYPE_SATA:
+		/* Enable adaptive CTLE for SATA Rx */
+		val = readl(priv->mmio + (0x0e << 2));
+		val &= ~GENMASK(0, 0);
+		val |= 0x01;
+		writel(val, priv->mmio + (0x0e << 2));
+		/* Set tx_rterm = 50 ohm and rx_rterm = 43.5 ohm */
+		writel(0x8F, priv->mmio + (0x06 << 2));
+
+		param_write(priv->phy_grf, &cfg->con0_for_sata, true);
+		param_write(priv->phy_grf, &cfg->con1_for_sata, true);
+		param_write(priv->phy_grf, &cfg->con2_for_sata, true);
+		param_write(priv->phy_grf, &cfg->con3_for_sata, true);
+		param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true);
+		param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true);
+		break;
+	case PHY_TYPE_SGMII:
+	case PHY_TYPE_QSGMII:
+	default:
+		dev_err(priv->dev, "incompatible PHY type\n");
+		return -EINVAL;
+	}
+
+	/* 100MHz refclock signal is good */
+	clk_set_rate(&priv->ref_clk, 100000000);
+	param_write(priv->phy_grf, &cfg->pipe_clk_100m, true);
+	if (priv->mode == PHY_TYPE_PCIE) {
+		/* gate_tx_pck_sel length select work for L1SS */
+		writel(0xc0, priv->mmio + 0x74);
+
+		/* PLL KVCO tuning fine */
+		val = readl(priv->mmio + (0x20 << 2));
+		val &= ~(0x7 << 2);
+		val |= 0x2 << 2;
+		writel(val, priv->mmio + (0x20 << 2));
+
+		/* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */
+		writel(0x4c, priv->mmio + (0x1b << 2));
+
+		/* Set up su_trim: T3_P1 650mv */
+		writel(0x90, priv->mmio + (0xa << 2));
+		writel(0x43, priv->mmio + (0xb << 2));
+		writel(0x88, priv->mmio + (0xc << 2));
+		writel(0x56, priv->mmio + (0xd << 2));
+	}
+
+	return 0;
+}
+
+static const struct rockchip_combphy_grfcfg rk3576_combphy_grfcfgs = {
+	/* pipe-phy-grf */
+	.pcie_mode_set		= { 0x0000, 5, 0, 0x00, 0x11 },
+	.usb_mode_set		= { 0x0000, 5, 0, 0x00, 0x04 },
+	.pipe_rxterm_set	= { 0x0000, 12, 12, 0x00, 0x01 },
+	.pipe_txelec_set	= { 0x0004, 1, 1, 0x00, 0x01 },
+	.pipe_txcomp_set	= { 0x0004, 4, 4, 0x00, 0x01 },
+	.pipe_clk_25m		= { 0x0004, 14, 13, 0x00, 0x01 },
+	.pipe_clk_100m		= { 0x0004, 14, 13, 0x00, 0x02 },
+	.pipe_phymode_sel	= { 0x0008, 1, 1, 0x00, 0x01 },
+	.pipe_rate_sel		= { 0x0008, 2, 2, 0x00, 0x01 },
+	.pipe_rxterm_sel	= { 0x0008, 8, 8, 0x00, 0x01 },
+	.pipe_txelec_sel	= { 0x0008, 12, 12, 0x00, 0x01 },
+	.pipe_txcomp_sel	= { 0x0008, 15, 15, 0x00, 0x01 },
+	.pipe_clk_ext		= { 0x000c, 9, 8, 0x02, 0x01 },
+	.pipe_phy_status	= { 0x0034, 6, 6, 0x01, 0x00 },
+	.con0_for_pcie		= { 0x0000, 15, 0, 0x00, 0x1000 },
+	.con1_for_pcie		= { 0x0004, 15, 0, 0x00, 0x0000 },
+	.con2_for_pcie		= { 0x0008, 15, 0, 0x00, 0x0101 },
+	.con3_for_pcie		= { 0x000c, 15, 0, 0x00, 0x0200 },
+	.con0_for_sata		= { 0x0000, 15, 0, 0x00, 0x0129 },
+	.con1_for_sata		= { 0x0004, 15, 0, 0x00, 0x0000 },
+	.con2_for_sata		= { 0x0008, 15, 0, 0x00, 0x80c1 },
+	.con3_for_sata		= { 0x000c, 15, 0, 0x00, 0x0407 },
+	/* php-grf */
+	.pipe_con0_for_sata	= { 0x001C, 2, 0, 0x00, 0x2 },
+	.pipe_con1_for_sata	= { 0x0020, 2, 0, 0x00, 0x2 },
+	.u3otg1_port_en		= { 0x0038, 15, 0, 0x0181, 0x1100 },
+};
+
+static const struct rockchip_combphy_cfg rk3576_combphy_cfgs = {
+	.num_phys = 2,
+	.phy_ids = {
+		0x2b050000,
+		0x2b060000,
+	},
+	.grfcfg		= &rk3576_combphy_grfcfgs,
+	.combphy_cfg	= rk3576_combphy_cfg,
+};
+
 static int rk3588_combphy_cfg(struct rockchip_combphy_priv *priv)
 {
 	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
@@ -609,6 +752,10 @@ static const struct udevice_id rockchip_combphy_ids[] = {
 		.compatible = "rockchip,rk3568-naneng-combphy",
 		.data = (ulong)&rk3568_combphy_cfgs
 	},
+	{
+		.compatible = "rockchip,rk3576-naneng-combphy",
+		.data = (ulong)&rk3576_combphy_cfgs
+	},
 	{
 		.compatible = "rockchip,rk3588-naneng-combphy",
 		.data = (ulong)&rk3588_combphy_cfgs
-- 
2.34.1